REPAIR TO LEAKAGE/SEEPAGE, WATER PROOFING TREATMENT OF ROOF, ROOFING SHEET, FALSE CEILING AND CONNECTED EM ITEMS AT CERTAIN LOCATION AT KANJOLI LINE BHARATPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, bell,same board, independent or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of wall, floor & ceiling etc. complete all as specified and as directed by Engineer in Charge

M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe rigid size not less then 20mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards/ existing sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete all as specified and directed for the following :- (a) One light point controlled by one way switch.

(b) One fan point controlled by one way switch.

(c) One 3 pin socket outlet, 5 Amps on the same board

S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified and as directed by Engineer in Charge

S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board complete all as specified and as directed by Engineer in Charge

S&F step type electronic fan regulator EME type 450 watt complete all as specified and as directed by Engineer in Charge

S&F Socket outlet 2 in 1, 3 pin, 5A 240V complete all as specified and as directed by Engineer in Charge

S & F or laying galvanised steel tubing medium grade (ISI marked) for hanging of fan and protection of under ground cable on poles/walls under road crossing of size 40mm bore complete all as specified and as directed by Engineer in Charge

S & F or laying galvanised steel tubing Light grade (ISI marked) for hanging of fan from Fan hook. of size 20mm bore complete all as specified and as directed by Engineer in Charge

Recess mounted 2x2 luminaire 24W comprises of thermally conductive material cmplete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm complete all as specified and as directed by Engineer in Charge .Crompton Code No : LCTLRNE-24-FO-CDL or equivalent in Philips, Havells.

Dismantling roofing (corrugated or semi corrugated) sheets of any description in roof coverings complete all as specified and as directed by Engineer in Charge

Dismantling timber scantlings 40 Sqcm and over in section from unframed work complete all as specified and as directed by Engineer in Charge

Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section from unframed work complete all as specified and as directed by Engineer in Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer in Charge

Dismantling post or struts (wood, steel or RCC ) any section, including taking out embedded portion in concrete, brick work, masonary etc and making good disturbed ground complete all as specified and as directed by Engineer in Charge

Demolition and breaking up of AC drain pipe of 100/75 mm internal dia, jointed in cement mortar and taking out of trenches or from walls complete all as specified and as directed by Engineer in Charge

S&F UPVC (SWR) pipe not less than 6 Kg/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall, in walls, type 'B' ISI marked of 110 mm bore complete all as specified and as directed by Engineer in Charge

Ditto all above item No 18 for 110 mm bore but fixing only complete all as specified and as directed by Engineer in Charge

S&F UPVC (SWR) pipe not less than 6 Kg/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall,laid in trench or in floor, type 'B' ISI marked of 75 mm bore complete all as specified and as directed by Engineer in Charge

Ditto all above item No 20 for 75 mm bore but fixing only complete all as specified and as directed by Engineer in Charge

S&F UPVC (SWR) bend of 110 mm bore of any radious complete all as specified and as directed by Engineer in Charge

Ditto all above item no 11 for 110 mm bore but fixing only complete all as specified and as directed by Engineer in Charge

S&F UPVC (SWR) branch piece, double (double Y) of 110 mm bore of equal or unequal complete all as specified and as directed by Engineer in Charge

Fixing only UPVC (SWR) branch piece, double (double Y) of 110 mm bore of equal or unequal complete all as specified and as directed by Engineer in Charge

S&F UPVC (SWR) bend of 75mm bore with access door of any radious

Ditto all above item no 15 for 75 mm bore but fixing only complete all as specified and as directed by Engineer in Charge

S&F UPVC (SWR) branch piece, double (double Y) of 75 mm bore of equal or unequal complete all as specified and as directed by Engineer in Charge

Fixing only UPVC (SWR) branch piece, double (double Y) of 75 mm bore of equal or unequal complete all as specified and as directed by Engineer in Charge

M&L in repair for Pedastal pattern wash down water closet complete all as specified and as directed by Engineer in Charge

M&L in repair for Orissa pattern pattern wash down water closet of size 580 x 440 mm white with integral foot rest including bedding and lime concrete complete all as specified and as directed by Engineer in Charge

Fixing only in repair pedastal pattern and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and as directed by Engineer in Charge

Fixing only in repair Orissa pattern pan including connection to trap and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor including bedding and lime concrete complete all as specified and as directed by Engineer in Charge

Fixing only in repair for seat cover any type for pedastal pattern complete all as specified and as directed by Engineer in Charge

Fixing only flush pipes to pedastal pan including all joints complete all as specified and as directed by Engineer in Charge

Fixing only flush pipes to Orissa pan including all joints and making good to floors complete all as specified and as directed by Engineer in Charge

S&F for 20 mm bore light grade galvanised pipe to wall, ceiling or in floors in short length exc 300 mm but nexc 450 mm with both end notched shape cut complete all as specified and as directed by Engineer in Charge

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work / stone masonary or cement concrete external surfaces of wall /chajjas/roof protection etc using waterproofing compond (paid seperately) including finishing the surface even and fair complete all as specified and as directed by Engineer-in-Charge

Supply only integral water proofing compound complete all as specified and as directed by Engineer in Charge

M&L forRendering 15 mm thick in patches nexc 3.00 Sqm each, cement and sand mortar 1:4 on fair faces of brick work / stone masonary or cement concrete surfaces of wall /chajjas/roof protecjion etc including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer with hand roller complete all as specified and as directed by Engineer in Charge

Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified and as directed by Engineer in Charge

M&L for cutting chases , pinning in , making good to facing where required and pointing in CM 1:3 to end or edges for concealed water tubing exc 10 cm but nexc 20 cm girth complete all as specified and as directed by Engineer in Charge

Cutting holes of superfacial area exc 150 sqcm but nexc 400 sqcm in brick or stone walls built in cement mortar complete all as specified and as directed by Engineer in Charge

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and as directed by Engineer in Charge

Ditto all above item No 46 but fixing only complete all as specified and as directed by Engineer in Charge

S&F rolled mild steel Hollow section square or rectangular of wall thickness 3.25 to 4.25 mm thick, work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and as directed by Engineer in Charge

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer in Charge

Ditto all above item No 49 but fixing only complete all as specified and as directed by Engineer in Charge

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and as directed by Engineer in Charge

Pre painted galvatume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm th, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified and as directed by Engineer in Charge

Pre painted galvatume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm th, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified and as directed by Engineer in Charge

M&L for 2mm thick fiber glass reinforced translucent corrugated/ plain sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed by Engineer in Charge

Ditto all above item No 54 but fixing only complete all as specified and as directed by Engineer in Charge

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ hooks complete all as specified and as directed by Engineer in Charge

S&F asbestos cement two pieces adjustable serrated ridge, 6 mm thick for corrugated or semi-corrugated sheets with 'L' or 'J' hooks complete all as specified and as directed by Engineer in Charge

S&F asbestos cement two pieces adjustable Plain wing ridge, 6 mm thick for corrugated or semi-corrugated sheets complete all as specified and as directed by Engineer in Charge

Fixing only asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ hooks complete all as specified and as directed by Engineer in Charge

Fixing only two pieces adjustable serrated ridge for asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ hooks complete all as specified and as directed by Engineer in Charge

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer in Charge

Cutting or uprooting grass incl removing old mud phuska of any thickness, removing filled soil below mud phuska, removing rubbish off the premises upto 100m, cleaning surface and preparing to receive new treatment complete all as specified and as directed by Engineer in Charge

Removing building materals etc. to a distance exc. 100 m and n exc. 3.0 Km beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed by Engineer in Charge

M&L for screed bed or bedding layer of cement mortar 1:4, 20 mm thick finished even and smooth without using extra cement all as directed by Engineer-in-Charge.

M&L for preparing surfaces for roof treatment by removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application, repair all cracks by cutting "V" groove and fill with PMC mortar (Polymer modified cement mortar) prepared by cleaning free from dust and loose particles and apply on dry surface first coat of crack fillar using putty knife or trowel allow to dry for 4 to 6 hr, afterthat apply second coat and dry for 4-6 hrs in ratio as per manufacturers specification, provide 75 mm x 75 mm coping made out of PMC mortar as above on all joints of vertical upstands to ensure that moisture content in the prepared surface does not exceed 5% immediately before application of liquid membrane. Material incorporation & Protection be provided as Terrasheild first apply with water (ratio terrasheild : water will be 4:1) as primer with coverage area 0.1 Kg per Sqm. After 2-3 hour later, second step apply directly first coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller.Spread non woven geo textile of 40 / 50 gsm with overlap of 50 mm in both direction when the surface is still tacky. After 4-6 hour later, apply third step apply directly second coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller. final thickness of complete treatment should be minimum 1.0 mm. Water tank and Khurra location one additional coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm be provided. after complete application full curing minimum 7 days . Above complete application will be done authorized apllicator from Manufacturer and manufacturer's specification. Make IWL co/ STP/Piddilite .

M&L for 40mm thick PCC type B-0,( 1:2:4) using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturers specification with galvanised chicken wire mesh ensuring a gradient min 1:80 towards drain. After the application of screed, provide contol joints along the length and breadth of entire screed area. The joints can be provided by using a saw cutting machine attached with a 3 mm blade. The joints will be 12 mm deep. 28-30 days later the joints shall be filled with elastomeric sealant as per manufactere's instruction. (WPC will deposited complete all as specified and as directed by Engineer in Charge

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed by Engineer in Charge

Dismantling 1000 ltr water tank and M&L new 1000 ltr ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position & including 20mm brass ball valve all as specified in SSR part-I complete all as specified and as directed by Engineer in Charge

Dismantling 500 ltr water tank and M&L new 500 ltr ISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position & including 20mm brass ball valve all as specified in SSR part-I complete all as specified and as directed by Engineer in Charge

M & L for Mild steel hollow sections uto 3.25 mm wall thickness,fixed independently, without connecting plates etc cut to length (cut to ordinary length ie within 20 mm of the length indicated) complete all as specified and as directed by Engineer in Charge

S&F 1.50 mm dia Mild steel wire 40x40 mm welded mesh, made up into mattress or cages,lapped wired and laid in position including closing after filling complete all as specified and as directed by Engineer in Charge

Demolition cement Concrete (unreinforced) of any description and any position not otherwise specifically provided for complete all as specified and as directed by Engineer in Charge

M&L for providing Square/Rectangular,raised platform of hight 20 cm below the tank and base dia min 100 MM projected by the external dia all around of tank for pvc cylendrical tank of capicity 500/1000 liters using pcc 1:3:6 type C1 using 20 mm graded stone aggregate with smooth finish including necessary form work etc. complete all as specified and as directed by Engineer in Charge

Disconnecting existing tanks carefully, setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position capicity exc 250 ltr &nexc 500 litre inculding refixing of float valve, gate valve, nipple socket all necessary fixures with m &l , making functional without overflow (Cleaning repairing etc. measured and paid separately). complete all as specified and as directed by Engineer in Charge

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc.capicity exc 250 ltr &nexc 500 litre with gunny bags ,sand cleaning with fresh water and bleaching powder and marking date of cleaning with CA No complete all as specified and as directed by Engineer in Charge

Supply only PTMT ball valve of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt 210 grams for ball only) complete all as specified and as directed by Engineer in Charge

Supply only PTMT ball valve of 15 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt 142 grams for ball only) complete all as specified and as directed by Engineer in Charge

S&F in repair PVC cover thread type for PVC Water tank 500ltr capacity and fixed with screw with tank wall complete all as specified and as directed by Engineer in Charge

Labour only for closing bolt holes or other similar holes in old aesbostos sheet by sealing with one bitumen and one plain G.I. washer on either side and including supply and fixing 8 mm dia bolt and nut, bolt nexc 25 mm in length complete all as specified and as directed by Engineer in Charge

Dismantling and taking up or down the existing unserviceable GI pipe and S&F for new galvanised steel water rubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes (a) 15 mm bore

Ditto all as per Srl Item No 80 here in before but 20 mm bore

Dismantling ceiling frame work of any description and arrange ment with complete supporting members complete all as specified and as directed by Engineer in Charge

S&F GI snap grid frame work of size 600 x 600 mm for false ceiling including necessary notching. The snap grid shall consist of GI Main Tee and Cross Tee of size 35 x 25 x 0.7 mm, Main Tee suspended from the soffit @ 1200mm c/c with level clips, Cross Tee inserted/fixed into the slots of main T @ 600 mm to form a grid. The snap grid (main/cross tee section) shall be supported at ends all along the wall with GI angle of size 25 x 25 x 0.7 mm fixed to wall with suitable arrangement, fixed in grid support with 2.50 mm dia plain mild steel wire galvanised class 3 fixed in detached works etc to support snap grid, made of GI as per specification complete all as specified and as directed by Engineer-in-Charge.

S&F 10 mm thick hollow section polycorbonate sheet fixed or laid/inserted to steel/timber/GI/Aluminium ceiling frame work with screws incl covering edge by Alu channel section 20 mm depth, complete all as directed by Engr-in-Charge

S&F in gypsum board not less than 6-7mm thick of size (595x595mm) both side PVC coated with one side decorated pattern complete all as specified and as directed by Engineer in Charge

Ditto above Item No 85 but fixing only complete all as specified and as directed by Engineer in Charge

M&L in repair POP moulding of any pattern as approved on site n exc. 10 cm girth finish even & Smooth with necessary rubbing with sand paper and final c finish with two coat oil bound distemper complete all as specified and as directed by Engineer in Charge

M&L for Complete removal of existing treatment,washing, rubbing down and stopping of distemperd and painted surface of old surface by Electric Rotary grinder including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorscent salts and trading oil and greasy spots of Wall Surface removing of nails, making good holes , cracks etc , cleaning of floors , glasses, joinery of drops and splashes incl all arrangement necessary for execution of work,complete all as specified and as directed by Engineer-in-Charge.

M&L for including sand paper gentle rubbing to obtain smooth surfaces and applying Two coats of oil bound distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller over one coat of water based white pigmented akali resistant priming paint , over 1mm thick wall care putty on Wall Surface including all necessary arrangement for execution of work ,complete all as specified and as directed by Engineer-in-Charge.

Painting to new or prevously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparatin of surfaces complete all as specified and as directed by Engineer in Charge

Hacking out old broken glass, any thickness, size, quality, or description, from frame nexc 1.5 Sqm each pane complete all as specified and as directed by Engineer in Charge

S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty exc 0.5 Sqm each pane complete all as specified and as directed by Engineer in Charge

S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane complete all as specified and as directed by Engineer in Charge

S&F for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty exc 0.5 Sqm each pane complete all as specified and as directed by Engineer in Charge

Dismantling boarding of any description, fixed in any position with nails complete all as specified and as directed by Engineer in Charge

M&L for 18 mm thick PVC boarding shutters of density exc 550 Kg per Cum but nexc 600 Kg per Cum one side decorative lamination & other sidebalancing lamination sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification or approved pattern complete all as specified and as directed by Engineer in Charge

M&L for 18 mm thick PVC boarding shelves of density exc 550 Kg per Cum but nexc 600 Kg per Cum one side decorative lamination & other sidebalancing lamination sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required, Supported for three sides with 18 mm x 18 mm PVC Ply fixed with Screw all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification or approved pattern complete all as specified and as directed by Engineer in Charge

S&F for stainless steel 125 mm handle not less than 12 mm dia suitable for cupboard shutters with self tapping stanless steel screw complete all as specified and as directed by Engineer in Charge (Make Ozonon, Hafle India or Sunshine India)

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 40 mm complete all as specified and as directed by Engineer in Charge

deva engineers

unique traders

Pioneer Enterprises

krishna Associate