Renovation of welfare hospital Renovation and Construction of doctor and staff quate(G-2)

Amount

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.3

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.4

Providing P.C.C. M-15 with nominal mix of (1:2:4) in Foundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, , mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I. BCD 5.3.1.2

Providing R.C.C. M-20 with normal mix of 1:1.5:3 in slab,chajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening , mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. BCD 5.3.9.11

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns,roof slab,beam. BCD 5.3.17.3

Providing T.M.T. Reinforcement FE 500 of following dia Rods as per approved design and drawing including carriage of M.S. Rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. (APPROVED BRAND - TATA/ SAIL) BCD 5.5.4

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) BCD 5.5.12

Providing and fixing glazing in aluminium doors,windows ventilators shutters and partition etc. with EPDM rubber/neoprene gasket-- direction of E/I. BCD 5.5.29

Supplying, fitting and fixing good quality, well dressed and well seasoned local wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I. BCD 5.4.3

Supplying, fitting & fixing 35 mm th. Solid core type decorative single leaf FLUSH DOOR SHUTTERS in doors with block board core blended with high quality phenol formal dehydes synthetic resinboth side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle,cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I. BCD 5.4.32

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l. BCD 5.8.32

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification. BCD 5.8.41

Providing two coats of painting with synthetic enamel paint with one coat of primer of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. 5.8.45

Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I . BCD 5.7.6

Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible do all comp. BCD 5.12.1

Providing and laying 25mm thick kotah stone slab flooring of approved size texure and colour over 19mm thick base of lime mortar (1:1:1) (limeputty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. (iii) 450X450 mm size. BCD 5.6.19

Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I . BCD 5.7.3

CARRAIGE OF MATERIALS

(I)CEMENT

(II)SAND

(III)STONE CHIPS

(V)STEEL,

(vi) Bricks

Wiring for light /Power plug with 2 x 4 Sq mm FRPVC insulated copper conductor single core cable in surface /recessed PVC conduit along with 1 no Sq mm FRPVC insulated copper conductor single core cable for loop earthing ass required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6 amp switch and 3 pin 5/6 amp

Wiring for Curcuit Submain Wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC Conduit as reqd-

2 x 1.5 Sq mm + 1 x 1.5 Sq mm earth wire

Providing and fixing 6 SWG dia G.I wire on surface / or in recess for loop earthing along with existing surface/recessed conduit/sub main wiring/cable as required

supplying and drawing folowing size of PVC insulated aluminium conductor, single core cable in the existing surface/recess PVC conduit as required

Supplying and fixing call bell buzer suitable for single phase 230 volts complete as required

supplying and fixing brass batten/angle holder including connection etc.as required

s/f 2 pin,5 amp ceilling rose on the existing juction box/wooden block including connection etc as required

s/f 18 watt C.F.L etc all complete as required

S/F of EXTRA SLIM batten with 27mm width suitable for single T5 fitting VECTOR 28W 1 X TLS 28W (PHILLIPS) as required

Supplying and fixing mirror light cat no.021342BJExL 1X 11W as required.

supply & fixing circular celling fan cat no TC G 700 as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outletand 15/16 amps modular switch, connection etc. as required.

Supplying and fixing decotwist 25 watt B.C as required

Supplying and fixing 11 watt C.F.L etc all complete as required

Supplying , fixing & fitting facncy wall bracket light QW 2814 2760 watt (philips) as required

supply of 1400 mm sweep celling fan bajaj/cromption or any other approved make without regulator as required.

supply of 12" dia khaitan india exhaust fan etc as required

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 c) th 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc.as required

supply & fixing special type bulk head fitting etc all complete as required.

Supplying and fixing following way prewired SP&N MCB distribution board of steel sheet for 240 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator

2 + 4 way, Single door

2 + 8 way, Single door

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required

Providing and fixing of lightning conductor finial, made of 25 mm dia 300mm long, copper tube, having single prong at top, with 85 mm dia 3mm thick copper base plate including holes etc. complete as required

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required

Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuck nuts and spring washers etc. complete as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as quired.

Supplying and fixing following rating, double pole, 240 volts,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required

supply fitting and fixing 250 watt HPSV FITTING complete as required - sodium light

Supplying fixing 2 Amp DP switch complete as required

supply of follwing size SLPE insulted armoured cable (make havel's polycable) as required..3.5 core 50 sq.mm

Supplying fitting and fixing vitreous white glazed earthen ware I.W.C of Parry,Hindustan or any other I.S.S. approved make -----direction of E/I. 3.3.1(C) 580 mm long with 12.5 lit low level PVC Cistern

Supplying fitting and fixing flat back or angular,lipped front vitreous white glazed earthen ware Urinal of Hindustan,Parry or any other I.S.S. approved make -----direction of E/I. 3.2.3 Flat Back or standing Corner

providing and fixing C P.V.Cpipes -----direction of E/I . DSR 18.9.3 External work 25mm dia nominal bore

Supplying fitting and fixing vitreous white glazed earthen ware wash hand Basin of Hindustan,Parry or any other I.S.S. approved make -----direction of E/I. 3.2.4(A) Flat Back or standing Corner

Making connection of G.I.distribution branch with G.I. main -------direction of E/I. DSR 18.13.1

Providing and fixing gun metal non return valve of approved quality -------direction of E/I. DSR 18.19.1

Providing and fixing C.P.brass angle valve of approved quality-------direction of E/I. DSR 18.53.1

Supplying,fitting and fixing the following items complete with all materials -------direction of E/I. 3.1.21 (15 mm nominal bore)

C.P.brass dish container

Providing and fixing C.P.brass bib cock of approved quality-------direction of E/I. (15 mm nominal bore) DSR 18.49

Polythene water storage tank of mark with cover and suitable locking system in double layer . M-079

Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I . BCD 5.7.3

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. BCD 5.8.18

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. BCD 5.8.20

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. DSR 13.26

providing and fixing on wall face unplasticised - rigid P.V.C pipes -110 mm dia.. DSR 12.41.2

Finishing walls with textured paint of required shade: New york (two or more coats applied @3.28 ltrs/10sqm)over and including priming coat of exterior primer applied @2.2kg/10sqm. DSR 13.45.1

Supplying,fitting and fixing the following items complete with all materials -------direction of E/I. (15 mm nominal bore)

C.P. Liquid soap solution holder

Wiring for light/fan point/ exhaust fan point / call bell point with 1.5 Sq mm FR PVC insulated copper conductor single core cable in surface/ recessed conduit with modular type switch ,moduler plate,suitable size G.I box etc.as required. 1.1.2.

Wiring for twin control light point with 1.5 sq mm FRPVC insulated copper conductor Single/ core cable in surface /Recessed P.V.C Conduit 2 way piano type switch phenolic laminated sheet cover suitable size M.S Box and earthing the paint with 1.5 Sq mm FRPVC insulated copper conductor single core cable etc as reqd1.2

Wiring for Curcuit Submain Wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC Conduit as reqd-1.7

2 x 2.5 Sq mm + 1 x 2.5 Sq mm earth wire1.7.2

2 x 4.0 Sq mm + 1 x4 Sq mm earth wire(For H.P.S.V)1.7.3

2 x 10 Sq mm+1 x 10 sq mm earth wire1.7.5

supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc.as required1.25

Supplying and fixing extra conduit down rod of 20 cm length G.I.pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored1.48

Supplying and fixing TP & N(three phase &neutral) 415 volts ,residual …..do….etc as requied 63 amp TP & N switch.2.17.3

Supplying and fixing following way prewired SP&N MCB distribution board of steel sheet for 240 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator2.8

Extra for using salt and coke for G.I or copper plate earth electrode etc as reqd3.7

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling tc. s required3.13

Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)4.6

Supplying and fixing following rating, double pole, 240 volts,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required2.14.1+2.14.2

laying of cable 5.1

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth so obtained to a distanceupto 50M and average lift of 1.5M---direction of engineer-in charge . BCD 5.1.1

Extra earthwork in hard soil (vide classification of soil item -B) all complete as per specification and direction of E/I. BCD 5.1.2

Providing Local sand filling in foundation trenches and plinth ---complete as per specification and direction of E/I. BCD 5.1.10

Providing designation 75A one brick flat soling joints filled with local sand --- direction of E/I. BCD 5.6.1

Providing P.C.C. M-150 with nominal mix of (1:2:4) in foundation -- with approved quality of stone chips 20 mmto 6 mm size graded and clean coarse sand -- all complete as per specification and direction of E/I. BCD 5.3.1.2

Providing R.C.C. M-200 with nominal mix of (1:1½:3) in Stiffner-- with approved quality of stone chips 20 mmto 6 mm size graded and clean coarse sand -- all complete as per specification and direction of E/I. BCD 5.3.1.1

Providing designation 75 A Brick work in C.M.(1:6) in foundation and plinth -- -- all complete as per specification and direction of E/I. BCD 5.2.3

Providing 125 mm thick reinfoced Brick work in C.M.(1:4) --- direction of E/I. BCD 5.2.23

Providing 12 mm thick Plaster in C.M (1:4) with clean coarse sand of F.M.1.5 -- all complete as per specification and direction of E/I. BCD 5.7.2

Providing 1.5 mm cement punning -- all complete as per specification and direction of E/I. BCD 5.7.11

Supplying and fixing C.I.Cover without frame for manholes DSR 19.15.1

Providing M.S.footrest including fixing manholes with 20x20x10 cm concrete Block 1:3:6 as per standard design

Provioding and Fixing S.W.intercepting trap in man holes with stiff mixture of cement mortar 1:1 including testing of joints etc. complete DSR 19.34.2

Supplying material sand labour for constructing insopection chamber600mm 450mm x 750mmdeep ---- l complete as per specification and direction of E/I. 3.3.8

Providing and fixing soil,waste and vent pipes , Sand cast iron S&S pipe 100 mm dia. DSR 17.35.1.1

Goods & Services Tax (G.S.T.) @ 18%

Labour Cess @ 1%

AKASH KUMAR SINGH (BID ID -651103)

Bidder Name

M/S AMIT TENT HOUSE