Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAdmitted-Finance NO 107 ASHOK NAGAR GANDHI NAGAR POST NEYVELI 607 308 | NEYVELI | CUDDALORE | TAMIL NADU | 607308 | ₹1.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.8 Cr+₹60.8 L (52.5%)Admitted-Finance | ₹1.8 Cr+₹60.8 L (52.5%) | L2 | Admitted-Finance |
| 3 | L3₹1.9 Cr+₹76.7 L (66.2%)Admitted-Finance | ₹1.9 Cr+₹76.7 L (66.2%) | L3 | Admitted-Finance |
| 4 | L4₹2.0 Cr+₹79.3 L (68.4%)Admitted-Finance 21 SWASTIK CHAMBERS GROUND FLOOR CHEMBUR MUMBAI MAHARASHTRA 400071 | MUMBAI SUBURBAN | MAHARASHTRA | 400071 | ₹2.0 Cr+₹79.3 L (68.4%) | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | HINDUSTAN CONSTRUCTION CORPORATION L4 | Sri Venkateswaraa Engineering L2 | SAKTHI ENGINEERS L3 | JK ENGINEERS L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Installation of SS piping components and other inline equipments like (Pipe fittings & Valves) on permanent supports including shifting of materials from existing staking area to work site, Detergent cleaning, acid cleaning, final alignment and pressure testing as per approved documents and applicable standards.( Qty calculation, for pipes: inch-mtr will be calculated as per actual pipe size x length, For pipe fittings & Valves, 0.5 will be considered from actual size of items.) Payment will be made after pressure testing only. | 850 | inch-mtr | 590 ₹5,01,500 | 750 ₹6,37,500 | 600 ₹5,10,000 | 375 ₹3,18,750 Lowest |
| 2.00 | Installation of CS piping components and other inline equipment’s like (Pipe fittings & Valves) on permanent supports including shifting of materials from existing staking area to work site, Final alignment, two coats of epoxy primer & two coats of epoxy finish painting and pressure testing as per approved documents and applicable standards. ( qty calculation, for pipes: inch-mtr will be calculated as per actual pipe size x length , for Pipe fittings & Valves 0.5 will be considered from actual size of items.) Payment will be made after pressure testing only. | 2,200 | inch-mtr | 472 ₹10,38,400 | 1,100 ₹24,20,000 | 350 ₹7,70,000 | 200 ₹4,40,000 Lowest |
| 3.00 | Butt/Mitre Pipe welding (SS 304L) using GTAW process Including Edge preparation, Fit up, Root & Final DPT Examination, RT Permanent Identification and Local Passivation, Radiography clearance as per technical specification. Payment will be made only after successful inspection clearance. | 500 | inch-dia | 3,540 ₹17,70,000 | 1,400 ₹7,00,000 | 1,750 ₹8,75,000 | 800 ₹4,00,000 Lowest |
| 4.00 | Butt/Mitre Pipe welding (CS) using GTAW process Including Edge preparation, Fit up, Root & Final DPT Examination, RT Permanent Identification, Radiography clearance as per technical specification. Payment will be made only after successful inspection clearance. | 1,280 | inch-dia | 826 ₹10,57,280 | 780 ₹9,98,400 | 1,400 ₹17,92,000 | 600 ₹7,68,000 Lowest |
| 5.00 | Seal/Fillet/Socket welding of (SS 304L) using GTAW process Including Edge preparation , Fit up, Root & Final DPT Examination and Local Passivation. (Payment will be made only after successful inspection clearance) | 120 | inch-dia | 3,540 ₹4,24,800 | 780 ₹93,600 | 1,200 ₹1,44,000 | 500 ₹60,000 Lowest |
| 6.00 | Seal/Fillet/Socket welding of (CS) using GTAW or SMAW process Including Edge preparation , Fit up, Root & Final DPT Examination. (Payment will be made only after successful inspection clearance) | 400 | inch-dia | 826 ₹3,30,400 | 450 ₹1,80,000 | 1,000 ₹4,00,000 | 350 ₹1,40,000 Lowest |
| 7.00 | Radiographic Examination of all Butt Welds using X-Ray Technique. RT of all welds shall necessarily be carried out using X – Ray Machine. Gamma Ray Technique may be used depending upon site condition, with prior approval from department. The number of exposures required for examining a particular joint shall be in consultation with EIC. The rates for X – ray examination shall include supply of X – ray films, consumables for processing films, dark room facility, providing air conditioners for dark room, labour, re–shoots, repair shoots, etc. No payment will be made for re – shoots and shoots for repair joints. | 1,070 | inch-dia | 1,180 ₹12,62,600 | 850 ₹9,09,500 | 900 ₹9,63,000 | 700 ₹7,49,000 Lowest |
| 8.00 | Process pumps erection including shifting from existing staking area to work site including levelling of Pump Base, Shim packing , Hardware's installation and Alignment as per Clint Requirements details as per technical specification. | 3 | No | 23,600 ₹70,800 | 25,000 ₹75,000 | 15,000 ₹45,000 Lowest | 25,000 ₹75,000 |
| 9.00 | Supply Fabrication, Erection and Painting of MS Structural Items like Angle, Channel, Beams, Plates and GI coated U Clamps with two nuts with washer & two lock nuts of 50/100/150 NB pipe size As per the size & Site Requirements, details as per technical specification. | 5,200 | Kg | 250 ₹13,00,000 | 180 ₹9,36,000 | 160 ₹8,32,000 | 127 ₹6,60,400 Lowest |
| 10.00 | Supply ,Fabrication and erection of SS Pipe supports from SS 304L sheets. which involves acid cleaning/shearing/ bending/ forming and welding (GTAW), including LP examination and weld passivation.(Installation of 3mm thick SS 304L plate at top of the MS piping supporting structures to covering the exposed M.S portions & 1.6 mm thick SS 304L plates bending to the pipe Circumference at GI U clamping areas to avoid direct contact of SS & GI U clamp and final alignment of piping on permanent supports, details as per technical specification. | 500 | Kg | 944 ₹4,72,000 | 1,100 ₹5,50,000 | 750 ₹3,75,000 | 395 ₹1,97,500 Lowest |
Tender Value
₹1.7 Cr
EMD Value
₹3.4 L
Closing Date
22 Jul 2024, 3:00 pmClosed
General Manager, INRP(K)
Office of GM, 608 Building, BARC, Kalpakkam
Construction of pumping system for tanks in dyke at CWMF
2024_BARC_814236_1
BARCF/INRPK-MA/CW/TR/100/2024
Open Tender
Pipes and Pipe related activities
Item Rate
270 days
INRPK/NRB/BARC/Kalpakkam
Please refer tender documents
8 documents required · 8 mandatory
₹0
₹3.4 L
1 Oct 2024
2 Jul 2024
26 Jul 2024
2 Jul 2024
22 Jul 2024
3 Jul 2024
3 Jul 2024 - 15 Jul 2024
Amount
Installation of SS piping components and other inline equipments like (Pipe fittings & Valves) on permanent supports including shifting of materials from existing staking area to work site, Detergent cleaning, acid cleaning, final alignment and pressure testing as per approved documents and applicable standards.( Qty calculation, for pipes: inch-mtr will be calculated as per actual pipe size x length, For pipe fittings & Valves, 0.5 will be considered from actual size of items.) Payment will be made after pressure testing only.
Installation of CS piping components and other inline equipment’s like (Pipe fittings & Valves) on permanent supports including shifting of materials from existing staking area to work site, Final alignment, two coats of epoxy primer & two coats of epoxy finish painting and pressure testing as per approved documents and applicable standards. ( qty calculation, for pipes: inch-mtr will be calculated as per actual pipe size x length , for Pipe fittings & Valves 0.5 will be considered from actual size of items.) Payment will be made after pressure testing only.
Butt/Mitre Pipe welding (SS 304L) using GTAW process Including Edge preparation, Fit up, Root & Final DPT Examination, RT Permanent Identification and Local Passivation, Radiography clearance as per technical specification. Payment will be made only after successful inspection clearance.
Butt/Mitre Pipe welding (CS) using GTAW process Including Edge preparation, Fit up, Root & Final DPT Examination, RT Permanent Identification, Radiography clearance as per technical specification. Payment will be made only after successful inspection clearance.
Seal/Fillet/Socket welding of (SS 304L) using GTAW process Including Edge preparation , Fit up, Root & Final DPT Examination and Local Passivation. (Payment will be made only after successful inspection clearance)
Seal/Fillet/Socket welding of (CS) using GTAW or SMAW process Including Edge preparation , Fit up, Root & Final DPT Examination. (Payment will be made only after successful inspection clearance)
Radiographic Examination of all Butt Welds using X-Ray Technique. RT of all welds shall necessarily be carried out using X – Ray Machine. Gamma Ray Technique may be used depending upon site condition, with prior approval from department. The number of exposures required for examining a particular joint shall be in consultation with EIC. The rates for X – ray examination shall include supply of X – ray films, consumables for processing films, dark room facility, providing air conditioners for dark room, labour, re–shoots, repair shoots, etc. No payment will be made for re – shoots and shoots for repair joints.
Process pumps erection including shifting from existing staking area to work site including levelling of Pump Base, Shim packing , Hardware's installation and Alignment as per Clint Requirements details as per technical specification.
Supply Fabrication, Erection and Painting of MS Structural Items like Angle, Channel, Beams, Plates and GI coated U Clamps with two nuts with washer & two lock nuts of 50/100/150 NB pipe size As per the size & Site Requirements, details as per technical specification.
Supply ,Fabrication and erection of SS Pipe supports from SS 304L sheets. which involves acid cleaning/shearing/ bending/ forming and welding (GTAW), including LP examination and weld passivation.(Installation of 3mm thick SS 304L plate at top of the MS piping supporting structures to covering the exposed M.S portions & 1.6 mm thick SS 304L plates bending to the pipe Circumference at GI U clamping areas to avoid direct contact of SS & GI U clamp and final alignment of piping on permanent supports, details as per technical specification.
Supply of SS Pipes TP-304L Seamless of sizes 100 NB Schedule 40 of approximate length ranging from 5 to 7 m, details as per technical specification.
Supply of SS Pipes Fittings 304L Seamless of sizes 100 NB with Schedule 40, Types of fittings Elbows 90° Butt weld type, details as per technical specification.
Supply of SS Pipes Fittings 304L Seamless of sizes 100 NB, 100x100x100, with Schedule 40, Types of fittings Equal Tees Butt weld type, details as per technical specification.
Supply of SS Pipe fittings of 304L sizes 100 NB with Class-150 #, Types of fittings SORF Flanges, details as per technical specification.
Supply of CS Pipes SA-106 Gr.B Seamless of sizes 50 NB of approximate length ranging from 5 to 7 m and Schedule 40, details as per technical specification.
Supply of CS Pipes SA-106 Gr.B Seamless of sizes 100 NB of approximate length ranging from 5 to 7 m and Schedule 40, details as per technical specification.
Supply of CS Pipes SA-106 Gr.B Seamless of sizes 150 NB of approximate length ranging from 5 to 7 m and Schedule 40, details as per technical specification.
Supply of CS Pipe fittings of SA 234 Gr.WPB Seamless sizes 50 NB with Schedule 40, Types of fittings Elbows 90°Butt weld type, details as per technical specification.
Supply of CS Pipe fittings of SA 234 Gr.WPB Seamless sizes 100 NB with Schedule 40, Types of fittings Elbows 90°, details as per technical specification.
Supply of CS Pipe fittings of SA 234 Gr.WPB Seamless sizes 150 NB with Schedule 40, Types of fittings Elbows 90°, details as per technical specification.
Supply of CS Pipe fittings of SA 234 Gr.WPB Seamless sizes 50 NB with Schedule 40, Types of fittings Equal Tees Butt weld type, details as per technical specification.
Supply of CS Pipe fittings of SA 234 Gr.WPB Seamless sizes 100 NB with Schedule 40, Types of fittings Equal Tees, details as per technical specification.
Supply of CS Pipe fittings of SA 234 Gr.WPB Seamless sizes 150 NB with Schedule 40, Types of fittings Equal Tees, details as per technical specification.
Supply of CS Pipe fittings of SA 105 sizes 50 NB with Class-150#, Types of fittings SORF Flanges, details as per technical specification.
Supply of CS Pipe fittings of SA 105 sizes 100 NB with Class-150#, Types of fittings SORF Flanges, details as per technical specification.
Supply of CS Pipe fittings of SA 105 sizes 100 NB with Class-300#, Types of fittings SORF Flanges, details as per technical specification.
Supply of CS Pipe fittings of SA 105 sizes 150 NB with Class-150#, Types of fittings SORF Flanges, details as per technical specification.
Supply of CS Pipe fittings of SA 234 Gr.WPB Seamless sizes 150x100 NB with Schedule 40, Types of fittings Eccentric Reducer, details as per technical specification.
Supply of CS manual Lift Check Non return valve Flanged end of sizes 100 NB with rating 300#, details as per technical specification.
Supply of pneumatically operated SS Ball Valves of sizes 100 NB with rating 150#, raised face flanged end, details as per technical specification
Supply of CS Valves of sizes 25 NB with rating 150#. Types of valves Manual operated ball valve flanged end, details as per technical specification.
Supply of pneumatically operated CS Ball Valves of sizes 50 NB with rating 150#, raised face flanged end, details as per technical specification
Supply of pneumatically operated CS Ball Valves of sizes 100 NB with rating 300#, raised face flanged end, details as per technical specification
Supply of pneumatically operated CS Ball Valves of sizes 100 NB with rating 150#, raised face flanged end, details as per technical specification
Supply of pneumatically operated CS Ball Valves of sizes 150 NB with rating 150#, raised face flanged end, details as per technical specification
Sri Venkateswaraa Engineering
SAKTHI ENGINEERS
HINDUSTAN CONSTRUCTION CORPORATION
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 19.17 MB
BOQ_855702.xls
BOQ • 0.28 MB
tenderdoc.pdf
Tender Documents • 11.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .