Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹57.2 L
EMD Value
₹1.1 L
Closing Date
25 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Overhaul Division, Nasik
Aircraft Overhaul Division, Nasik
Structural repairs and renovation at HAL Guest House in Dhun Apartment, Worli and painting works at Kurla, Mumbai
9725
NK/FW/C-1598/2024-25.
Works
Mig Complex - Aircraft Overhaul Divn - Nasik - Works - Contracts
₹0
₹1.1 L
25 Oct 2024
21 Sept 2024
21 Sept 2024
25 Oct 2024
Essential/ Prequalification Criteria
Annual Turnover: Average annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 of the previous financial year /Accounting year [ should not be less than 30% of Amount put to tender] i.e Rs. In Lakhs
Turn over (Rs. In Lakhs)
I. Attested complete set of financial documents for last three (3) years Viz. balance sheet, P & L account, Supporting schedules and notes to account certified by CA with UDIN II. Turnover certificate from Charted Accountant (CA) with UDIN. Related Document to be Uploaded to e-procurement portal.
Solvency : Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of tender Submission.( Should not be less than 40% of the estimated cost i.e Rs. In Lakhs)
Related Document to be Uploaded to eProcurement Portal.
Not meeting eligible criteria
Experience:
You are Not Eligible
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
GSTIN Registration Number.
ESIC Registration Number
EPF Registration Number
Bid Capacity ( 2AN-B)
Value of the work executed in last five Financial years (Financial year wise)
Related documents to be uploaded in eprocurement portal.
B = value at current price level of existing commitment and ongoing works to be completed in the next ‘N’ years (i.e 11 Months). (Authority:- Ministry of Statistics & Programme Implementation Guidelines Vide DO No 11025/28/2001 Dt. 7-11-01, Standard General Conditions for Domestic Contracts, as per Clause 4.6)
Earnest Money Deposit (EMD)
License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works)
Documents to be uploaded along with tender
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,
Address for correspondence:
Contact details
PAN No.:
I.T Returns for past 03 years (Assesment Year)
Related documents to be uploaded in eprocurement portal.
Bank Balance statement for last three months.
Details of latest overdraft facilities available with the agencies.
Details of plant & machinery for the work.
Proposed work completion schedule in the form of bar- chart.
Details of person holding the power of Attorney.
Related documents to be uploaded in eprocurement portal.
Bank(s) details: (ECS Bank details Form No E-05)
ECS Bank details as per Form No E-05 in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal. And hard copy of original ECS and cancelled cheque to be submitted to address mentioned in e-tender notice for refund of EMD or payment etc.
Acceptance by party for Scope of work as per BOQ and Tender terms & conditions
DECLARATION
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 146) including price bid do hereby accept all the terms and conditions laid down
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.
Specification
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
Dismantling tile/stone work in floors,roofs,etc. laid in cement mortar including stacking material within 50 metres lead for any thickness all complete and as directed by EIC.
Demolishing cement concrete of nominal concrete 1:3:6 or richer mix (including equivalent design mix) manually/ by mechanical means in any position including disposal of material/debris off the site within 50 metres lead and stacking for further disposal all complete and as per direction of EIC.
Dismantling/removing old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Dismantling doors, windows and clerestory windows (aluminium/steel/wood) shutter including chowkats, architrave, holdfasts, etc. of area 3 sqm. and below all complete and stacking for further disposal.
Chipping of unsound/weak concrete material from slabs, beams, columns, etc. with manual chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of EIC.
Disposal/Removing of moorum/building rubbish/malba/similar unservicable, dismantled or waste material/debris including loading, conveying/transporting, unloading to approved municipal dumping ground for all leads and lifts all complete and as directed by EIC. Note: Disposal shall be initially done from work site to ground floor with using appropirate means through staircase by maintaining cleaniness of staircase and surrounding before final disposal to dumping ground. (If permitted, use of LIFT. Work shall be carried out taking all precautions and damage to the existing property shall be borne by the contractor.)
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of EIC.
Providing temporarliy MS props for relieving RCC elements viz column, beam, slab, balconies of their superimposed load partially/ fully by providing adjustable steel props (lacks) of atleast 2" diameter and of required height including wooden plank, runners 4" X 4" at top and bottom and bracing for uniform distribution of load and maintaining the same in position till required as directed by EIC. (Payment will be made once per each structural component)
Providing and laying in position MS reinforcement TMT of grade Fe-500D or more, for R.C.C. work including straightening, cutting to required length, bending, hooking, cranking, placing in position and binding with MS wire (annealed) not less than 0.9 mm Dia. or securing with clips including necessary lapping, spacers/cover blocks complete all as specified and as directed by EIC.
Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.
Providing and fixing shear connector of 10mm dia upto 200mm length, bend to shape with anticorrosive treatment as specified and directed by EIC.
Providing centering and shuttering including strutting, propping, etc.and removal of formwork for plain or reinforced cement concrete straight, horizontal, sloping as required including all cutting & waste, centering, bracing, all complete as specified & as directed by EIC for:
Providing and laying/applying Micro Concreting for strengthing of RCC members viz columns, beams, lintels, chajja, slab, etc. of required grade curing, finishing, etc all complete as specified and directed by EIC.
Providing, mixing and applying bonding coat of approved and adheisve on chipped portion of RCC as per specifications of engineer incharge comple in all respect as below:
Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)
Providing and applying 15 mm thick cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) with neeru finish to concrete/AAC/ brick surfaces, in all positions and level including scaffolding, curing etc. complete as specified and as directed.
Providing and applying 6mm thick cement plaster on ceiling in cement mortar 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and neeru finsih all complete as specified and as directed by EIC.
Providing and fixing 18 mm thick granite stone slab of colour black, cherry/ruby red gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. all complete as specified and as directed.
Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink without drain board of bowl size 610 x 510 x 200 (bowl depth) mm as per IS 13983 with stainless steel plug 40mm all complete as directed.
Providing and laying Vitrified tiles in floor in different sizes 9-10mm thick with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
Providing and laying Vitrified tiles in different sizes 9-10mm thick with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, dado over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) , jointing with gray cement slurry @ 3.3 Kg/sqm including grouting the joint with cement & matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. (Size 600x600mm or above)
Providing and fixing Ist quality ceramic glazed minimum 6mm thick conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade all complete.
Providing and applying white cement based putty of 2 mm thickness over plastered surface of approved brand and manufacturer to prepare the surface even and smooth complete as diected by EIC.
Providing and applying Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including priming coat with water thinnable cement primer having VOC content less than 50grams/litre all complete as specified and as diected by EIC.
Providing and fixing ISI marked 30mm flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary SS screws all complete as specified and as directed by EIC.
Providing & Fixing 1.0 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish as approved with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality all complete as specified and as directed by EIC.
Providing and fixing bright finished brass door latch/aldrop of size 300 x 16 x 5mm with necessary screws etc. all complete as specified and as directed.
Providing and fixing bright finished brass tower bolts (barrel type) of size 200 x 10mm with necessary SS screws etc. all complete as specified and as directed.
Providing and fixing 125mm bright finished brass handles with screws etc. all complete as specified and as directed.
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, screws etc. to suit shutter thickness all complete as specified and directed.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing fly proof wire gauze of Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides fixed in aluminium work of windows, clerestory windows and doors all complete as directed by EIC.
Providing & fixing Window Lock to aluminium sliding window as approved by EIC.
Providing & fixing of SS body with single nylon roller (weight bearing capacity to be 40kg) for sliding windows complete and as specified.
Providing & fixing Wool Pile for sliding window complete and as specified.
Providing and appying Weather Silicone sealant as specified and directed.
Providing and fixing with float glass of panes 5.0 mm thickness (weight not less than 12.50 Kgs/sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
Providing and fixing M.S. grills/grating/cage of approved/required pattern for outdoor AC units over chajja fixed/anchored to wall with M.S. flats, angle, channels, square or round bars, etc. including fixing over chajja with holdfasts, screws,anchors, etc. including priming coat with approved steel primer all complete as specified and as directed.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work , including cutting chases and making good the walls,etc.
Providing and fixing gun metal valve of CI wheel of approved quality (screwed end) all complete as specified and as directed.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with same brand solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required all complete as specified and as directed.
Providing and fixing white vitreous China Wash basin of size 550x400 mm with necessary brackets/anchor bolts including providing and fixing 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, including cutting and making good the walls wherever require complete as specified and as directed.
Providing and fixing 20mm nominal bore, 120mm long (weight not less than 198 gms) PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball all complete as specified and as directed.
Providing and fixing 15 mm nominal bore CP brass stop/angle cock of approved quality conforming to IS 8931 as spcified and as directed.
Providing and fixing 15mm nominal bore CP brass bib cock of approved quality confirming to IS:8931 as specified and as directed. (Weight not less than 400 gms.)
Providing and fixing 8mm dia CP/SS jet with flexible tube upto 1 meter long with SS triangular plate to EWC of approved brand and quality complete as specified and directed by EIC.
Providing and fixing 15mm nominal bore and 300mm long unplasticised PVC connection with brass unions/nuts complete as directed.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
Providing and fixing in position approved and ISI brand PVC SWR fittings to drainage pipes as below:
Providing and fixing P.V.C. long arm Nahani Trap of 100mm diameter including SS grating, bend and connecting piece upto the outside face of the walls making good damaged surface, testing etc. complete as directed by Engineer in charge.
Supply and fixing acrylic letters/alphabets/symbols of 3mm thick and UV printed HAL logo pasting with suitable adhesive/self adhesive over ACP panel 3mm thick supported over MS hollow sections of size 25mm x25mm x 2.6mm thick in proper line, level, at all height,positions including transportation, etc.all complete as diretced. Note: Alphabets may be in Hindi/English/Marathi as per direction of EIC.
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701 , colour of opaque white or as approved including making necessary holes for inlet, outlet and overflow pipes. The base support including fittings & fixtures shall be paid separately all complete as specified and as directed.
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (whereever required) extruded profiles havingminimum wall thickness of 2.1mm for series R3 and R4 profiles conforming to EN:12608 in any shape, colour and design duly reinforced with galvanised mild steel section made of required shape & size as per CPWD specification, uPVC extruded glazing beads, interlocks and inline sash adaptor(wherever required) of appropirate dimension, EPDM gasket, hardware, SS 304 grade fastnersof minimum 8 mm dia with countersunk head, comprising of matching polymide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws, etc. Profile of frame, sash & mullion (if requried) shall be mitred cut and fusion welded/mechnically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gapbetween frame and adjacent finsihed wall shall be filled with weather proof silicone sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of EIC.Section of stell reinforcement and cross sections of uPVC profiles to be as per design approved by EIC. Wire mesh/glazing of plain/toughened/laminated/double glass unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS 16231 shall be paid separately. Note: Strucutral design proof checked from a Government Engineering institue, to be provided by the manufacturer for : 9i) Sites with basic wind speed > 45m/sec as per IS 875-Part 3. (ii) Sites witrh strucutre height more than 20m for all wind speeds. Three track three panels sliding window/door with two glazed & one wire mesh panels aluminium channel for roller track, wool pile, nylon roller with SS 304 body using R3 series with frame (98mm & above) x (40mm & above) & both glaxed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) poweder coated handle on every glazed panel along with multi-point locking system.
Rupees Forty Eight Lakh Forty Five Thousand Six Hundred Ninety Seven Only
Approximate Basic Amount Put to Tender
Rupees Eight Lakh Seventy Two Thousand Two Hundred Twenty Five and Forty Six Paise Only
Rupees Fifty Seven Lakh Seventeen Thousand Nine Hundred Twenty Two and Forty Six Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
ETender_notice.pdf
TENDER_DOCUMENT • 0.46 MB
Checklist.pdf
TENDER_DOCUMENT • 0.39 MB
Tender_Document1598.pdf
TENDER_DOCUMENT • 1.69 MB
SOW.pdf
TENDER_DOCUMENT • 0.19 MB
ECSDetailsForm.PDF
TENDER_DOCUMENT • 0.16 MB
PQP.xlsm
TENDER_DOCUMENT • 0.02 MB
Pricebid..xlsm
TENDER_DOCUMENT • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .