RECONSTRUCTION OF TYPE - II QUARTERS INCLUDING DEMOLITION OF BLDG NO P-15 (UDAYGIRI) AND P-93 (VINDYAGIRI) AT INS HAMLA, MUMBAI

Amount

SCHEDULE "A" Part - I (BUILDING & STRUCTURES) Total of Sch-'A' Part-I

SCHEDULE "A" PART-II (SITE CLEARANCE, AREA DEVELOPMENT, EXCAVATION & EARTHWORK) Total of Sch-'A' Part-II

SCHEDULE "A" PART-III ( DEMOLITION / DISMANTLING) Total of Sch-'A' Part-III

SCHEDULE "A" PART-IV (INTERNAL ELECTRICFICATION) Total of Sch-'A' Part-IV

SCHEDULE "A" PART-V (INTERNAL WATER SUPPLY) Total of Sch-'A' Part-V

SCHEDULE "A" PART- VI (ROAD/PATHS/CULVERT) Total of Sch-'A' Part-VI

SCHEDULE "A" PART-VII (SEWAGE DISPOSAL) Total of Sch-'A' Part-VII

SCHEDULE "A" PART-VIII (AREA DRAINAGE) Total of Sch-'A' Part-VIII

SCHEDULE "A" PART-IX (RAIN WATER HARVESTING) Total of Sch-'A' Part-IX

SCHEDULE "A" PART-X (EXTERNAL ELECTRIFICATION) Total of Sch-'A' Part-X

SCHEDULE "A" PART-XI (EXTERNAL WATER SUPPLY) Total of Sch-'A' Part-XI

SCHEDULE "A" PART-XII (FIRE FIGHTING,FIRE DETECTION & ALARM SYSTEM) Total of Sch-'A' Part-XII

SCHEDULE "A" PART-XIII ( LIFTS ) Total of Sch-'A' Part-XIII

SCHEDULE "A" PART-XIV ( LIGHTNING PROTECTION ) Total of Sch-'A' Part-XIV

SCHEDULE "A" PART-XV ( AVIATION LIGHT ) Total of Sch-'A' Part-XV

SCHEDULE "A" PART -XVI (BLANK)

SCHEDULE "A" PART-XVII (TV/TELEPHONE CONDUITS) Total of Sch-'A' Part-XVII

SCHEDULE "A" PART -XIX (MISCELLANEOUS ITEMS)

SITE CLEARANCE, AREA DEVELOPMENT, EXCAVATION & EARTHWORK

Removing excavated material out side MD land.

DEMOLITION / DISMANTLING

Removal debris obtained from demolition of bldg outside MD Land Note for 19.01 & 20.01: (i) Before quoting the tender, the tenderers are advised to ascertain the distance out side MD and, at which the excavated material/ debris are to be disposed off. No extra claim what-so-ever shall be entertained on this account. (ii) This item shall be considered as per the requirement at site.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, and regulators, etc. for reuse at site or carrying to the store

Taking down all type of old unserviceable MCB DBs etc complete all as specified and directed.

Taking down all type of old unserviceable MCBs (SP/SPN/TPN/TP) etc complete all as specified and directed.

Taking down U/S Submain wiring of copper/ Aluminium twin core cable of various sizes complete.

Taking down carefully by unscrewing light fittings of any type (tube lights fittings) any wattage etc.

INTERNAL ELECTRIC SUPPLY

S & F modular type bell ding dong of 2 module size, conforming to IS: 8884- 1978 complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 43 or equivalent model of MK Cat-Part No. W26235, or Havells Cat-Part No. AHOLXXW000

S & F (3 Star (EEL) T shape lamp capable of delivering 1000 lumens having luminous efficacy of > 100 lm / w starting time 0.5 sec , CRI >80, CCT 6500K, PF> 0.9, Input voltage range 140-270 V, Input frequency 50-60 Hz, and B22 socket complete all as specified and directed by E-in-Charge

S & F 10 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 110 lumen/W, with THD < 20%, IP20 Rated, CRI >80 polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 140V - 270V AC, input frequency 50- 60 Hz, PF > 0.9, with operating temperature Upto 45 deg C,SDCM < 5, Class C – Non Replaceable Driver including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. The said product should have BIS Mandatory before tender publish date. Make: Philips Cat-Part No. BN 021 LED10S- 6500 PSU GR S1 or equivalent model of Bajaj or Wipro

S & F 22 W surface/wall mounted LED batten having high efficiency long life LED chips with Lumens Output 2500 Lumens and luminous efficacy of > 110 lumen/W, THD < 20%, IP20 Rated, CRI >80 polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 140V - 270V AC, input frequency 50- 60 Hz, PF > 0.9, with operating temperature Upto 45 deg C,SDCM < 5, Class C – Non Replaceable Driver including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. The said product should have BIS Mandatory before tender publish date. Make: Philips BN 021 LED25S 6500 PSU GR S1 or equivalent model of Bajaj or Wipro

S & F 25 W LED street light having high efficiency long life LED module with Lumes out put of 5500 Lumens with high LED efficacy of ≥ 110 lumen/W, integral current electronic LED driver with surge voltage protection of 4KV, IP 66 protection & IK07 Vandal Proof Protection, high efficiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, Voltage range 140 - 270V/ 50Hz, with Life of 30,000 hrs @Ta 35°C, with Class I Insulation classification, Under certification of IS10322, including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. The said product should have BIS Mandatory before tender publish date. Make: BAJAJ Cat-Part No. BAJAJ 169799 BRTFG 45W LED I or equivalent model of Havells, Philips or Wipro

S & F BEE five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a down rod of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make: Crompton Cat-Part No. ENTRUST 50- 5 STAR or equivalent model of Havells Cat-Part No. ES 50 Premium or BAJAJ Cat-Part No. Electra 50

S & F BEE five star rated energy efficient high-speed ceiling fan having 1400 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a down rod of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make: Havells Cat-Part No. Velocity ES- 50 or equivalent model of Crompton or BAJAJ Cat-Part No. Electra 50

S & F energy efficient non-metallic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. VENTILUS 10" or equivalent model of Havells Cat - Part No. Ventil Air - DX White or BAJAJ Cat-Part No. Maxima DX

S & F watertight enclosure for modular devices, resistant to chemical and atmospheric agents, Uvs, etc, having self extinguishing class 2 insulating material, flame and abnormal heat resistance, reversible front face for opening door to left/right, DIN channel, IP65 ingress protection and IK09 impact strength all complete as specified and directed. (A) 4 module

S & F ISI marked MCB for AC applications till 63 A, having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, all complete as specified and directed.

6- 32 A, SP MCB, C- curve

MCB SPN 32 A C curve, 240 V 50 Hz AC

S & F modular type 25 A socket conforming to IS: 1293-1988 complete as specified and directed by engineer-in-charge.

S & F modular type 25 A one-way SP switch, conforming to IS: 3854- 1997 with finger proof terminal & indicator complete as specified and directed by engineer-in-charge.

Supply and Installation of Smart Single Phase Meter with the following specifications: • AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt 865-867 MHz Radio Frequency communication facility with self healing Mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. • Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for Cumulative Energy and Max Demand • Meter should have connect / disconnect functionality operable from prepaid billing software • The meter should support open communication protocol DLMS with the software MAKE: Secure, L&T, Schneider

M & L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised strip of size 32 mm x 6 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 40 mm diameter, connected to earthing test point, all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork in any strata complete, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. as all specified and directed. (Note: Qty of other Sch has been clubbed)

INTERNAL WATER SUPPLY

S & F Angular stop cock 15 mm dia, quarter turn Make- Jaquar Model No CQT-23053 or equivalent in Crab Tree/Kohler brand.

S & F for concealed stop cock, Regular body with adjustable wall flange, size 15mm dia. Make Jaquar Model No CQT 23089 or equivalent in Crab Tree/Kohler brand.

S & F overhead shower 120 mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system Make - Jaquar Model No OHS -1789 or equivalent in Crab Tree/Kohler brand.

S & F Pillar tap 15 mm dia single lever. Make Jaquar Model No CQT-23021 or equivalent in Crab Tree/Kohler brand.

S & F two way bib cock 15 mm dia. Make Jaquar Model No CQT-23041 or equivalent in Crab Tree/Kohler brand.

S & F Health faucet (ABS body) with 01 meter long PVC tube & wall hook. Make - Jaquar Model No ALD-CHR- 583 or equivalent in Crab Tree/Kohler brand.

S & F PVC connections 600 mm long braided hose with M10X1 Nipple, 15 mm nut, O-Ring & Rubber washer. Make - Jaquar Model No ALD-803AB or equivalent in Crab Tree/Kohler brand

EXTERNAL ELECTRIFICATION

Supply and fix LED 70 Watts street light fittings complete in street light poles/Buildings with and including drivers, pressure die cast aluminium housing, prewired complete. Including GI steel tubing medium grade 40mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts, bolts. The fitting shall conform to cat No - Havells ENDURAPEARPLUSSL70WLED757PASTTOPC or equivalent in Wipro/Phillips

M&L for 6 mtr long hot dipped galvanised octagonal poles with top A/F 70 mm bottom A/F 130 mm made out of 3mm thick HT sheet along with base plate of size 225x12 mm including 1500 mm long single arm bracket made out of 48 mm dia GI pipe and M24 x750 m long 'J' type EN8 grade foundation bolts along with template including RCC foundation as per Manufacturer's recommendations complete with form work etc and consisting of the following: (a) MCB SP 6A 230 V,10 kA mounted on 3 mm thick Hylam Sheet -1 No. (b) 4 Way connector bolt alongwith locking arrangement ,weather proof and water proof control space. Note: (a) The Rate quoted deemed to include the cost of 50 mm PVC pipe from cable trench to center of the pole concrete and 'J' type EN8 grade foundation bolts. (b) The rate quoted deemed to include the cost of connecting of incoming and outgoing cable in new octagonal poles through PVC pipe including taking out loop extending upto junction box connecting complete all as specified and directed.

M&L for 3 Core 1.5 Sq mm size multistranded copper conductor PVC unsheathed 650 / 1100 Volt Grade drawn in through steel tubular poles, for interconnection of cable looping box to Street Light Fitting complete all as specified and directed.

Supply install test and commissioning of MCCB 415 volt with 50 Hz 4 pole, 200 Amps 36 KA with suitable 2 mm thick CRCA box connecting to existing panel for addition and alteration complete all as specified and directed.

Supply, installation, test and commissioning of Main Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. complete as specified and directed by the engineer-in-charge. INCOMER MCCB 200 Amp 4 pole 415 v 35 KA (Incomer) with thermal magnetic release OUTGOING MCCB 160 Amp 4 pole 415 v 35 KA(Bldg) MCCB 125 Amp 4 pole 415 v 35 KA(spare) MCCB 100 Amp 4 pole 415 v 35 KA(utility Panel) MCCB 63 Amp 4 pole 415 v 35 KA (Spare) BUSBAR 300 Amp rated copper bus bar with colour coded heat shrinkable sleeve METERING & INDICATION i) Ammeter, Digital type, with suitable CTs - 01 set ii) Voltmeter, Digital type - 01 set iii) R-Y-B phase indicating lamp- 03 Nos iv) Multifunction meter-01 No

Supply, installation, test and commissioning of Bldg Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. complete as specified and directed by the engineer-in-charge. INCOMER MCCB 160 Amp 4 pole 415 v 36 KA -01 No. Incomer with Thermal magnetic release OUTGOING MCCB 100 Amp 4 pole 415 v 36 KA-02 (for meter panel 1 & 2) MCCB 63 Amp 4 pole 415 v 36 KA-01 (Spare) SPN 16 Amp 2 pole 415 v 16 KA-02 (For meter room & lift attendant room) BUSBAR 250 Amp rated copper bus bar with colour coded heat shrinkable sleeve METERING & INDICATION i) Ammeter, Digital type, with suitable CTs - 01 set ii) Voltmeter, Digital type - 01 set iii) R-Y-B phase indicating lamp- 03 Nos

Supply, installation, test and commissioning of Meter Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. complete as specified and directed by the engineer-in-charge. INCOMER MCCB 100 Amp 4 pole 415 v 36 KA -01 No. with Thermal magnetic release OUTGOING i) MCB SPN 32A, 415V, 25 KA - 10Nos. ii) space for Single phase LPRF Meter 10-60 A -10 Nos (Prepaid type) BUSBAR 200 Amp rated copper bus bar with colour coded heat shrinkable sleeve METERING & INDICATION i) Ammeter, Digital type, with suitable CTs - 01 set ii) Voltmeter, Digital type - 01 set iii) R-Y-B phase indicating lamp- 03 Nos

Supply, installation, test and commissioning of Utility Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. complete as specified and directed by the engineer-in-charge. INCOMER i) MCCB 100 Amp 4 pole 415 v 36 KA - 01 Nos OUTGOING MCCB 32 Amp 4 pole 415 v 25 KA -05 Nos(Pump Panel, lift panel, terrace pump, street lights & one spare) MCCB 20 Amp 4 pole 415 v 25 KA (common area lights) - 01 Nos BUSBAR 200 Amps copper bus bar with colour coded heat shrinkable sleeve METERING & INDICATION i) Ammeter, Digital type, with suitable CTs - 01 set ii) Voltmeter, Digital type - 01 set iii) R-Y-B phase indicating lamp- 03 Nos iv) Multifunction meter-01 No

Supply, installation, test and commissioning of Water supply pump Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. complete as specified and directed by the engineer-in-charge. INCOMER MCCB 32 Amp 4 pole 415 v 35 KA (W S) -01 Nos OUTGOING MCB TPN 16 to 32 Amp 415v 35 KA - 02 Nos DOL starter suitable for 5 HP - 02 Nos BUSBAR 200 Amps copper bus bar with colour coded heat shrinkable sleeve METERING & INDICATION i) Ammeter, Digital type, with suitable CTs - 03 set ii) Voltmeter, Digital type - 01 set iii) R-Y-B phase indicating lamp- 01 Nos iv) Multifunction meter-01 No

EXTERNAL WATER SUPPLY

Cutting the existing 100 mm, CI Pipe line in position including insertion of new tees of size 100x100x80 mm as directed for tapping out branch connection complete including joints, excavation and earth work.

Material and labour for construction of valve chambers of size 900x900x900 mm depth including excavation and earthwork. PCC foundation (1:4:8) type D-2,Brick work cement mortar (1:4) using old size of class B bricks PCC coping at the top in the ratio 1:2:4, plastering 15 mm thick in the ratio 1:4 including MS sheet cover 3 mm thick with angle iron frame 25x25x4 mm alongwith locking arrangement compete and painting on steel surfaces with one coat of red oxide paint over two coats of synthetic enamelled paint all as specified and directed.

Supply, install, testing & commissioning centrifugal pump, electric driven end suction CI body and CI impeller with stainless steel shaft, mechanical seal and flow of 210 LPM at 30 m head, suitable squirrel cage induction motor TEFC type operation on 415 V, 3 phase, 50 Hz AC with suitable electric connection from starter to motor with suitable size copper wires, Suitable size suction pipe GI medium grade with foot valve Normex/ kartar with synthetic metal ball type complete with delivery pipe GI medium grade upto common header incl delivery valve and NRV complete with necessary air release valve, pressure gauge complete all as specified and directed by E-in-Charge

M&L for Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.00 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to GI strip 25x4 mm as earthing lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including 20 mm bore medium grade GI Pipe with , MS funnel with wire mesh, watering arrangement and 50 mm bore light grade GI pipe for earth lead protection from earth plate to test point or panel connecting point , PCC chamber ,CI cover with frame etc including necessary excavation in any type of strata, returning, filling , removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part - I, connected to Earthing test point all as specified and directed and testing on completion.

FIRE DETECTION ALARM SYSTEM

SITC of ISI Marked 2 core x 1.5mm2, Multistrand copper, FRLS Armoured cable, Red in Colour, laid on surface with GI Saddle-spacers every 0.3 Meters, Complete with GI junction Box, lugs, cable compression glands, cable tags and ferruling.

S & F plug-in gas leak detector to provide an early warning for LPG or CNG/PNG gas leakage from cylinders or through pipelines calibrated to give an alarm at about 2000 ppm along with separate heat and gas sensors with LEDs, audible buzzer alarm, etc. complete as specified and directed by the engineer-in-charge. (for kitchen)

Supply only fire extinguisher dry chemical powder (ABC) Type of capacity 6 Kgs as per IS-15683 Make - Cease Fire/ SAFEX/ AGNI

Supply only fire extinguisher CO2 type of capacity 4.5 Kgs as per IS-15683 Make - Cease Fire/ SAFEX/ AGNI

Supply only fire extinguisher mechanical foam type (AFFF) of capacity 9.0 litres as per IS-15683 Make - Cease Fire/ SAFEX/ AGNI

LIFTS

S&F RCBO 40 Amps , 415V, 50 Hz with 300 milli amp sensitivity with MCCB 40 Amps 25 KA 4 pole, 415V 50Hz housed in suitable size MS box made out of CRCA sheet 2 mm thick duly painted with two coats of enamel paint over a coat of red oxide primer

M&L for Earthing complete with copper plate 60×60cm ×3.15mm thick electrode, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to 20×3.15 mm copper strip as earthing lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including 20 mm bore medium grade GI Pipe with , MS funnel with wire mesh, watering arrangement and 50 mm bore light grade GI pipe for earth lead protection from earth plate to test point or panel connecting point , PCC chamber ,CI cover with frame etc including necessary excavation in any type of strata, returning, filling , removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part - I, connected to Earthing test point all as specified and directed and testing on completion.

AVIATION LIGHTS

S&F obstruction (aviation) light LED type required integral LED aviation light comprising of aluminium housing with poly carbonate enclosure with 5 (five) PG rolled circuit fixed on roof with GI tubing 20mm upto length 1.2 m all as specified and directed. Make Bajaj Model BGAV 302 LED or equivalent in Philips / Wipro

S & F MCB SPN 6-Amps ,240V,50 Hz AC

TELEPHONE & TV CONDUITS

S & F modular type 1 module RJ 11 telephone socket with shutter

Supplying & erecting 10 pairs x 0.5 mm dia PVC insulated armoured telephone cable 0.5 sq.mm PVC Sheathed solid tinned copper conductor cable laid in provided trench/ cable tray [Make: POLYCAB or equivalent]

S & F for 2 pair telephone cable having solid electrolytic annealed bare copper conductor of 0.5 mm nominal diameter with high density polyethylene insulation, paired, polyester taped, nylon rip cord and grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113 C including termination. [Make: POLYCAB or equivalent]

S & F 10 pair telephone distribution box with suitable S.S. frame for mounting tag module, Krone module and incorporated in 16 SWG MS box with proper lockable cover. The box should be fixed on wall with suitable fasteners including painting & earthing. This also includes fixing the cable, distribution chart sufficient space for the cables, wires etc [Make: DELTA or equivalent]

Supply and fix modular type 1 module TV socket with suitable GI mounting box

S & F RG 11 coaxial cable having solid electrolytic grade annealed plain copper central conductor of 1.63mm nominal diameter, gas injected physical polyethylene foam insulated, wrapped with aluminium mylar tape aluminium alloy wire braided, jelly flooded and PVC jacketed including termination.

S & F RG 6 coaxial cable having solid electrolytic grade annealed plain copper central conductor of 1.02mm nominal diameter, gas injected physical polyethylene foam insulated, wrapped with aluminium mylar tape aluminium alloy wire braided, jelly flooded and PVC jacketed including termination.

Supply & installation of 04 way splitter box for TV cable termination incl all necessary hardware accessories.

DG SET

Supply installation, testing & commissioning of factory assembled Diesel Engine driven generating set coupled with alternator AC to give continuous output of 62.5 KVA at a power factor of 0.8 lagging, 415 volts, AC, 3 phase, 4 wire, 50 HZ, 1500 RPM, diesel engine liquid cooled, mounted on common base frame complete with in built fuel tank of adequate capacity with fuel line & accessories, PCC foundation work as per manufacturer's instructions, vibration damper pads, micro processor based relay panel for automatic starting on mains failure, control panel showing all parameters of engine & alternator, sound proof canopy & other accessories etc. and confirming to the under mentioned technical specifications as per specified & directed. (A) DIESEL ENGINE : Water cooled, turbo charged,1500 RPM under NTP conditions conforming to IS -4722, BS-5000, IEC-60034/1, ISO 8528, BS-5514, ISO-3046 & IS-10001/10002with an overload capacity of 10% for one hr in 12 Hrs of continuous operation as per complete with the following accessories. (a) Radiator with blower fan with guard (b) Pipe coupling for cooling system (c) Corrosion inhibitor coolant (d) Filters for fuel/lube oil (e) Fly wheel housing and fly wheel suitable for alternator (f) Engine bearing mechanism in fly wheel housing (g) Shut off coil protection with safety for LLOP /HWT/ Over speed/high and low DC voltage.

(h) Dry type heavy duty replaceable paper element air cleaner with restriction indicator and vacuum indicators . (J) Residential silencers. (k) Stainless steel exhaust flexible bellows. (l) Motor driven priming pump. (m) Electric starter motor (n) Battery charging alternator. (o) Exhaust piping made out of "C" class MS Pipe inclusive of all accessories and hardware, necessary support as per manufacturer’s recommendations to sustain back pressure with rain cap. (p) Mineral wool insulation covered with aluminium sheets for the entire length of exhaust pipe as per manufacturer's recommendations. (q) First fill of oil, coolant and diesel during commissioning. (r) Interconnecting copper cabling of adequate capacity between batteries and controller. (s) Fuel pipe. C class (t) Self starter 12/24 volts DC. (u) Metering equipments for recording (i) Battery voltage and charging rate (ii) Coolant temperature (iii) Lubricating oil pressure (iv) Engine speed (RPM) (v) Engine hours run (vi) Balance of fuel.

(v) Safety as protection control (Trip and indication) (i) High water temperature (ii) Low Lube oil pressure (iii) Low and high speed trip (iv) High and low DC voltage (v) over speed Stop (w) Base frame : Sturdy fabricated welded construction, channel iron base frame (duly painted ) for mounting engine and alternator as per manufacturer’s design alongwith AVM pads (x) Battery: 12/24 Volt, 180 AH maintenance free with leads and terminals (y) Fuel Tank : Built in diesel storage capacity not less than 12 Hrs running of DG set or as per manufacturers recommendations (B) ALTRERNATOR : 62.5 KVA at 0.8 PF lagging, 415 volts, 3 Phase, 4 wire, 50 Hz at 1500 RPM self excited and self regulated with AVR brushless excitation band of voltage ± 1% of rated voltage from no load to full load insulation class H, self ventilated and conforming to IS4722, BS5000, IEC-60034/1, IS0 8528, BS5514, I503046, suitable for above mentioned diesel engine. (C) ACOUSTIC ENCLOSURE : Factory made acoustic enclosure (canopy) having size as per OEM adhering to latest CPCB Norms. (D) CONTORL PANEL : Control panel made out of 2mm thick CRCA sheets in suitable compartments front openable duly powder coated, weather proof and long lasting finishing including the followings :-

Comprehensive Maintenance of Lifts

Comprehensive maintenance and repairs of fully automatic electrically operated passenger lift - 01 No. of any Make and installed capacity with a carrying capacity of 13 Passenger (G+05 Floors) with AC variable voltage & variable frequency (VVVF drive) drive complete with all standard accessories, simplex collective automatic & manual dual controlled operation with/without attendant, automatic center opening doors with VVVF door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) comprising of all devices and accessories through 36 months for all days including holidays etc after expiry of defects liability period as shown below and all as specified and directed to Engr-in Charge for 01 nos of lifts Note Contractor shall carryout comprehensive maintenance (routine, daily, weekly, monthly, quarterly half yearly: yearly) through OEM as per the MOU and maintain all the lifts in serviceable condition 24 hrs x 365 days with out any extra cost.

(a) 1st year after expiry of defects liability period

(b) 2nd year after expiry of defects liability period

(c) 3rd year after expiry of defects liability period

Modern Engineering Co

Vishal Builders

SHRIPATI INFRASTRUCTURES PVT LTD

United Sales Corporation