PROVN OF CERTAIN WORKS AT SQUADRON GREASE TRAP FOR MEES, ADDN/ ALTN OF ALTERNATE ATC AND PROVN OF ANTI SUICIDE FAN ROD AT AF STN UNDER GE AF GORAKHPUR.

Amount

Taking down chowkats or frame with shutter without taking off shutter from the frames exc 1.50 Sqm but not exc 4.0 sqm each as in complete all as specified and directed.

Taking down chowkats or frame with shutter without taking off shutter from the frames not exc 1.50 Sqm complete all as specified and directed.

M&L powder coated aluminium doors with frame size 101.6X44.45X 2 mm thick and shutter aluminium anodised and top rail 47.62 x 44.45 x 1.5 and style 47.50X 44.50 X 1.50 mm,lock rail 83.5X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm incl necessary aluminium jointing cleats,glazing cleats,rubber packing anodised aluminium shape beading, screws etc with panelling in two parts with 4 mm thick aluminum composite board in lower panel and 5mm thick tinted/plain glass in panels incl all fittings, MS 4 lever mortice lock, floor door spring and all fittings& fixture complete all as spesified and directed

M & L powder coated anodised aluminium (sliding/hanging type) windows/ventilator with three track bottom track size 92 X 29.5 X 2mm thick, side & top track frame size 92 X 29.5 X 2mm thick and shutter aluminium anodised 39 X 20 X 2 mm thick incl necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass in panels incl all fittings & fixture complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 80 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 Nn(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2 ,modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 200 mm long aluminum anodized barrel tower bolt of exturded section complete all as specified and directed.

S&F 150mm long aluminum handles cast type anodized fixed complete all as specified and directed.

S&F 100mm long butt hings medium weight cold rolled stainless steel and fixed complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or colored cement to match incl screed bed or bedding layer or mortar 10mm thick layer of mortar in CM 1:4 for fixing wall tiles complete all as specified and directed.

M&L for non skid Ceramic coloured tiles 7-8 mm thick (square or recatngular ) area of each tiles exceeding 0.11 sqm and not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15 mm thick screed bed in 1:4 CM complete all as directed.

M&L for coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured over M&L for 15 mm thick screed bed in cement sand mortar 1:4 complete all as directed.

Dismantling of Wall Panelling/ false ceiling board ,fiber insulation board any thickness including wooden cover fillets/ aluminium frame work complete all as specified and directed.

S&F Aluminium Torsion Spring Perforated Ceiling System : Supply & fixing of torsion spring Tile Ceiling System in true Horizontal Level comprising of Tile of 600mm wide and 600mm/1200mm long manufactured out of 0.7mm thick Aluminium sheet with perforation of 1.8 mm dia. having 20% open area. The metal ceiling panels shall be downward accessible with a minimum of four (4) torsion springs per panel. The Tile will be manufactured through process of seven roller sheets levelling to achieve flat panels. Torsion Spring panel with two side & two end legs die formed and punched to receive torsion springs (min two springs each end or side) for secure engagement into Tee Grid main runners which are factory punched to receive torsion springs. Tiles will be square edged. The metal ceiling panels shall be downward accessible with a minimum of four (4) torsion springs per panel. Main Runners of Size 24 x 38 made of 0.35 mm thick (Minimum) Sheet placed 600mm CC with cross T of size 24x32 to be placed 600/1200 mm between the Main Runner & wall angle of size 24x24x 0.40 mm and fixing false ceiling tiles of approved texture in the grid including required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ""T"" runners to be suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in charge. Paint Finish: The Tile shall be Polyester powder coated in white colour. Panel will be electrostatically powder coated using electromechanical Reciprocator and automatic conveyer system, cured with gas catalytic technology. Acoustic Felt: Non-woven felt glued over the perforation for sound absorption to achieve NRC of 0.70.

Supply & Laying in replacment of CPVC pipes of outer dia 20mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply & Laying in replacment of CPVC pipes of outer dia 25mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete as directed.

S&F in repair for 15mm bore pillar taps cast copper alloy with capstan heads ,chromium plated ,screwed down high pressure .with or without lettered Hot or Cold with long screwed shanks and flynuts screwed for iron pipes complete all as specified and directed.

S&F in repair vitreous china wash hand basin flat back sizes 550mmx400mm excluding taps,waste chain and plug and porcelain stopper but including bracket complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including plastic water closet seat cover closed pattern with flat bottom and cover and MS chromium plated aluminised hinging device including connection to trap drain pipe or outgoing pipes and to flushing pipe anti syphonage pipe etc.complete

S&F CP soap dish/tray of minimum size 120 mm × 90 mm, fixed to the wall with stainless steel screws and wall plugs complete all as specified and directed.

S&F PVC connections 15mm sizes with PTMT nut of length 600mm complete all as specified and directed.

S&F PTMT gratting doom of 100mm dia size complete all as specified and directed.

S&F PVC valveless syphonic action type low level flushing cistern and flush pipe for 10ltr capacity with inlet ball valve float and handle including bracket complete all as specified and directed.

S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed.

S&F Viterous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortor 1:2 complete.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms)

S&F stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also including cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete.

M&L for preparing new plastered surfaces or old plastered surface with removing existing treatment and applying two coat of exterior emulsion paint camoflague pattern over one coat of primer complete all as specified and directed.

M & L preparing old decorated plastered surfaces of wall, pillasters, cornices etc by complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc and applying two coats of oil emulsion distemper over one layer of JK/Birla cement putty by using mechanised euipments as smart periodicals complete all as specified and as directed by Engr-in-Charge.

M&L brick work in CM ( 1:4 ) with using sub class `B `brick straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and as directed.

M&L for rendering 15 mm thick in CM ( 1:4 ) plaster on wall / concrete surfaces finish even and smooth without using extra cement complete all as specified

M&L including preparation of new plastered surfaces and applying two coat of cement base paint over one coat of primer on wall complete all as specified

Supply and fix in repair 20 mm thick insulated toughened glass (5 mm thick clear toughened glass and 5 mm thick black toughened glass with 10 mm spacing between both the glass filled with inert gas) and fixed with aluminimum beading and rubber gaskate of suitable size fixed in aluminimum frame work including aluminium frame work for in Alt ATC in tilted position complete all as specified and directed by Garrison Engineer / Engr-in-Charge.

M&L for providing pre-cast RCC lintel ,shelves etc type B-1 ,1:2:4 using 20 mm graded stone aggregate and set in cement mortar in 1:4 for shelves/platform etc including use and waste of form work complete all as specified

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specified

M&L PCC type D2 1:4:8 (Using 40mm graded stone aggregate) in foundation filling and mass concrete or as in sub base of path etc complete all as specified and directed.

S&F chequered cement concrete tiles 20cmx20cmx25mm/30cmx30cmx25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed or bedding layer in CM 1:4 including demolition of existing broken chequered tiles complete all as specified.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

M&L for point wiring of One light/Fan/Exhaust fan point controlled by one switch with and incl 1.5 sqmm (nominal area) PVC insulated multi-stranded copper conductor FRLS in and incl PVC Conduit pipe ISI marked 20/30 mm size or as required at site incl with its fittings and fixture such as tees, bends, elbows and juction boxes all moduler type surface mounting etc with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing and common earth terminal complete all as specified and directed.

S&F modular switch flush single pole one way 6 Amps complete all as specified and directed.

Supply and fixing modular Ceiling rose 65mm dia suitable for 230V AC surface bakelite suitable for 2/3 batten fitting complete all as specified and directed.

Supply & fix Industrial LED light fitting well glass with housing made from cast aluminium opaque/transparent polymer diffuser for optimum light output IP 65 and integreted electronic driver of capacity 60 Watt all as specified and directed by Engineer-in-Charge.

Supply and fix twin LED aviation light fitting comprising of aluminium housing IP 65, polycarbonate diffuser enclosure including complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring 6 Sqmm with two runs of 6 sqmm single core multi stranded copper conductor FRLS and one run of 4 sqmm PVC insulated copper earth wire connected to earth in PVC conduit including all fitting fixed on wall/ceiling , complete all as specified and directed by Engineer-in-Charge.

S&F sheet metal single pole and neutral encloser with a two pin and earth plug and socket complete with one MCB SPN 20 amps, 240 V omplete all as specified and directed.

Supply & Fixing MCB DB SPN 240 Volts 200 Amps rates bus bar having 12 way singe door shutters complete all as specified and directed.

S&F MCB SPN 240 Volts of capacity 63 Amps complete all as directed by Engineer-in-Charge.

S&F MCB SP 240 Volts of capacity 5 to 40 Amps complete all as directed by Engineer-in-Charge.

Supply and installation , testing & commissioning outdoor type self supporting totally enclosed factory fabricated LT bus bar panel box made out of 3.15mm thick MS sheet of size suitable with projected globe roof for rain water protection, dust and vermin proof hinged double shutter doors with neorprene rubber gasket , epoxy powder coated including danger plate, earth strip, ventilation louvers , bottam detachable gland plate complete with suitable size zinc chromium plated nuts, bolts, and washers etc outdoor type cubicle panel board suitable for 3 phase 4 wire ,415 volt ,50 HZ and 40 mm x 40 mm x 6 mm angle iron frame, weather proof ventilated with locking arrangement incl of PCC pedestal , comprising the following & including taking down the existing Feeder pillar panel board:- (i) Aluminium bus- bar 200Amps,supported with suitable size Porcelain standlock with suitable size brass nut, bolts and washers with heat shrinkable colour coded PVC sleeving for 3 phase & neutral . - 01 Set (ii) MCB SPN, 40amps 240 Volts, 50 Hz - 01 No-Incoming (iii) modular Switch socket 15 Amp cap-02 nos-Outgoing, (iv) modular Switch socket 5 Amp cap-04 nos-Outgoing to be enclosed within panel all design approved bey engr-in-charge before placing order.

M&L earthing complete with 60cmx 60cmx3.15mm thick copper plate electrode buried in ground vertically not less than 2.25mtrs deep below ground level with top edge of the plate not less than 1.5mtrs below ground level with 20 x 3mm copper strip including necessary excavation and earth work (in any of strata) providing charcoal dust, salt mixed in continuous layer 15 CM all around the plate and balance pit will be filled with vigitable soil approved by engineer in charge, PCC (1:3:6 ) type C1 in chember ,Precast 50 mm thick in cement ( 1: 2:4) type B.1 with CI frame with cover, 20mm dia bore light grade GI watering pipe furnel etc fixing of GI Pipe 15 mm bore protection for earthing wire from earth pit to test point complete & making connection all as directed by Engineer-in-Charge.

Supply and install single phase Hi wall split units indoor/outdoor complete with cordless remote control unit, filter for better indoor air quality with 5 star rating of capacity 2 TR all as specified and directed. (a) 1.5 ton capacity cooling unit wall mounting type complete with remote control, draining out arrangement, manually adjustable cover for cool air from front with and inter connection with the condensing unit etc all as specified. (b) One No condensing unit of 1.5 ton capacity comprising of all fitting such as single phase electric driven compressor, condensing fan motor, Condensor with necessary controls and accessories. Note – (i) Additional length for copper tubing if required at site shall be supply &fix in respective items. (ii) GI tubing for condensate water shall be measured and paid separately under respective item. Make:- Hitachi/Bluestar/Voltas.

Supply & fixing single pole and neutral enclosure with a two pin and socket complete with one single pole MCB 240 volts, 40 Amps complete all as specified and directed.

M/L for submain wiring with 2 runs of 10 sqmm single core PVC insulated stranded copper conductor FRLS cable drawn through rigid non metallic PVC conduit with one run of 10 Sqmm PVC insulated copper conductor FRLS cable as earth continuity conductor and necessary connections complete all as specified and directed. Note : 2 runs of 10 sqmm PVC insulated unsheathed copper conductor and 1 run of 10 sqmm PVC insulated unsheathed copper conductor FRLS and 1 run of PVC conduit of size 25 mm will be measured as single run.

Disconnecting and taking down carefully of LT Cable 50/25 sqmm along with cable end joint (approx 50 Rm each) connected to DG set 50 kva AMF including earthing connections, dismantling,lifting,shifting and re-installation of DG Set at new location (approx 50 mtr from existing) with connection of new incomming and outgoing cable from change over switch complete all as specified and directed.

S&F construction of platform for installation of Diesel Generator set xxx kva of size not less than 3.0m x 2.0m x 1.35m with & including excavation in any type of soil 30 cm below ground level, PCC M-10 ( Nominal Mix ) in foundation, 100mm thick PCC M-15 (Nominal Mix) over 150 mm thick Hard Core of Broken stone boulder over rammed earth filling in floor, stone masonry work in cement mortar 1:4, 15 mm thick plaster using cement mortar 1:4 and applying two coats of colour wash over one coat of white wash complete all as specified and directed.

Supply Lay, testing & commission of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 4 Core complete all as specified and directed.

M&L for Earthing complete with galvanised copper plate electrode 60cm× 60cm × 3.15 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth lead copper srip of 20 mm X 3 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion dismantling unserviceable erthing complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed by Engr-in-charge.

Returning, filling in under floor using excavated soil, spreading and levelling in layers n exc 25cm thick well ramming in layers and watering etc. complete all as specified and directed.

Removing surplus excavated soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and direceted.

M&L for broken stone hardcore of gauge n exc 63mm, spread in layers n exc 15cm complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 40mm graded aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for providing cement concrete type B-1, 1:2:4 using 20 mm graded aggregate as in 40 mm thick flooring ,finishing the concrete surfaces even and smooth using extra cement complete all as specified and directed.

M&L for taking down Ceiling Fan of any size/make fixed/hanged at different locations & replacing conventional fan rod with an anti-suicide fan rod of 260 mm (10") and white in color with is a specially designed down rod used to hang a ceiling fan that incorporates a mechanism to prevent suicide by hanging.They typically work on Spring Mechanism having two parts, an upper and lower section, held together by a spring mechanism. Automatic Release, if a weight exceeding a certain threshold (typically around 20-25 kg) is applied to the fan (as would be the case in an attempt to hang), the rod's joint separates, and the spring expands. This expansion allows the fan and the applied load to descend safely, preventing the person from being fully suspended. The spring keeps the fan above the person's head, minimizing the risk of injury as they land on the ground. Benefits. The primary purpose is to deter and prevent suicide attempts by hanging from ceiling fans. They are designed to be safe for normal use, only activating when an abnormal load is applied, relatively easy installation and compatibility with most ceiling fan models including clamps and necessary related items all as per site requirement specified and directed by Engr-in-charge. with replacement of multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including making necessary electric connections & testing complete all as specified & directed. Make- Gold life or equivalent as approved by GE. (Note: This is only designed for to prevent suicide by hanging, safe for normal use, not for risk of injury.) NOTE : (i) Quoted rate is deemed to be inclusive of Anti-Suicide Fan rod and rubber reel & testing of serviceable rubber reel & cleaning / dusting of ceiling fan and completeall as specified & as directed to the entire satisfaction of the Engr-In-Charge.

M & L aluminium die cast body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fix complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for 50mm bore HDPE grade with all fitting and fixing complete with clips, wall cleats, hooks ,plugs to wall and ceiling or laid in floor complete all as specified and directed.

M&L for painting steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide primer including preparation of new surfaces complete complete all as specified and directed.

M&L framed work as Steel Circular ladder, grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (nominal mix )using 20mm graded aggregate fdn,including raft footing foudation beam,plinth beam,bases for columns for basement slabs,under reamed piles and mass concrete complete all as specified and directed.

M & L 0.50 MM thick (total coated thickness ) pre-painted galvalume zinc coating GI based corrugated steel sheet having tensile stength of 550 Mpa as roofing/cladding to wall fixed with self tapping screw as specified and directed.

M&L for Precast RCC 1: 2:4 type B1 (nominal mix ) using 20mm graded stone aggregates as in drain/MH cover slab etc complete all as specifide and directed .

S&F 6mm to 8mm diaTMT bars cut to legth, bent to shape required including cranking bending spirally for hooping for slab for manhole etc complete all as specifide and directed .

M&L for 75mm thick plain cement concrete (1:3:6), typeC-2,using 40mmgraded crushed stone aggregate as in plinth protection, laid in slope of 1:12 and surface finished even and smooth without usingextra cement including making joint at 2.5m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen85/25 and two part of sand), complete all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing finished even and smooth without using extra cement including spike rolling to surface or making impression of expanded metal whilst the concrete is green complete all as specifide and directed .

M&L for providing cement concrete 1:2:4 type B0 using (12.5mm graded aggregate) as in copings complete all as specified and directed.

M&L plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate in surface channels and drains complete all as specified and directed.

S&F Fully S.S 304 , Oil & Grease Trap,*Size – 1500 x 900 x 900 mm *Make- S.S 304, 1.2 mm sheet thickness JSL MAKE sheet *S.S Make Big Size Basket *Ball Valve for releasing Oil and complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendereing, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 150mm complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, complete all as specifide and directed .

S&F for 110mm bore PVC (SWR) bends provided with access door complete all as specifide and directed .

M&L for Concrete bed to drain pipes in PCC 1:4:8 type D2 using 40mm grade stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested for the following 110mm bore pipe complete all as specifide and directed .

M&L for point wiring with two single core 2.5 sqmm cable (nominal area) stranced copper conductor, FRLS PVC insulated unsheathed cable 1100V grade in and including concealed PVC conduit of size not than 20mm dia with modular metal flush box 1.6mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessoriees and using single core 2.5 Sqmm (Nominal area) stranded copper conductor FRLS PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly, complete all as specified and directed. 5/15 Amps independent socket point complete all as specified and directed.

M&L modular socket outlet 2 in 1, 6 pin 6A and 16A combined 2 module, complete all as specified and directed.

M&L for modular switch 1 way 16A, 1 Module flush button single pole and one way complete all as specified and directed.

S&F made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP43 protection) fabricated from minimum 1.6MM thick CRCA sheet and fixed flush to wall and suitable for universal standard DIN rail, earth bar and cable ties for cable management top and bottom removable gland plates with knockout complete all as specified and directed.

S&F MCB single pole & neutral 240 volt C curve 10KA 40 Amps capacity complete all as specified and directed.

M/s B. P. Construction (BID ID -3508464)

H AND Y GROUP (BID ID -3502680)

PAWAN GARG (BID ID -3502850)

M/s Vivek Traders (BID ID -3503014)

PANKAJ AND BROTHERS (BID ID -3502272)