Gravity cock 1/2 inch Chrome Plated For LHB type Coaches

Special Eligibility Criteria

1. 1

   1. Railway reserves the right to procure entire of bulk quantity (i.e. minimum 80% of the Net Procurable Quantity) from vendors with satisfactory past performance for supply of same/similar items. Please refer Clause 2.6 of IBD (v 3.0) attached with tender. 2. Developmental orders upto and within 20% of Net Procurable Quantity will be placed as per clause 2.6.2 of IBD (v3.0) attached with tender. 3. Scope of similar item:- Any Type of Gravity cock with material of tendered specification (IS: 1264) for rolling stock in Indian railways.

   Document optionalConfirmation required
2. 2

   Dealers/Agent quoting on behalf of OEM must submit tender specific authorization from the OEM, mentioning OEM-s confirmation for fulfilling warranty obligation,along with their offer failing which their offer will be summarily rejected.

   Document requiredConfirmation required
3. 3

   MII : In keeping with the Public Procurement (Preference to Make in India) Order, 2017 as amended, it has been found that there is su%uE049cient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to class I local suppliers only and the vendors who do not qualify to be class I local supplies should not quote in the tender as their o%uE02Aers shall not be considered for any ordering. In case any vendor who does not qualify to be a class I local supplier for the tendered item participates in the tender it does so at their own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. The minimum local content for the local supplier of the above item, to be categorized as Class-I local suppliers shall be 50%.

   Confirmation required

Check List

1. 1

   This is an e-tender. Manual Offers/Bids for this tender will not be accepted under any circumstances, only electronic Offers/Bids shall be accepted.
2. 2

   Have you furnished the statement of deviations, if any?
3. 3

   Have you mentioned MAKE/BRAND of OEM ?
4. 4

   Have you indicated the HSN code of your offered product?
5. 5

   Have you kept your offer validity as per "Condition for Responsiveness of Offer"?
6. 6

   Have you indicated the percentage of Local Content in the relevant column?
7. 7

   Have you submitted the details of location(s) where local value addition is made?
8. 8

   Have you attached relevant document for MSE if you claimed purchase preference as MSE firm?

Commercial-Compliance

1. 1

   The bidder must necessarily upload a filled and signed copy of proforma as per annexure-I uploaded with the tender documents.

   Document requiredConfirmation required
2. 2

   Goods & Services Tax (GST): As per Clause 8.0 and all sub-clauses of "ECR Instruction to Tenderers and General Conditions of Tenders For Supply Contracts (v. 3.0 issued on 06.03.2024)" and Railway board guidelines issued thereafter.

   Document optionalConfirmation required
3. 3

   In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism [RCM] and deposit the same to the concerned tax authority.

   Document optionalConfirmation required
4. 4

   Bidders shall also give Declaration as below:- " I/We agree to pass on such additional input tax credit as may become available in future under GST scheme, in respect of all the inputs used by the manufacturing and/or supply of final goods/services on the date of supply by way of reduction in price and advise the purchaser accordingly".

   Confirmation required
5. 5

   The Bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the Standard Governing Conditions of this tender.

   Document optionalConfirmation required
6. 6

   The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored. [Denial of this condition is not recommended].

   Document optionalConfirmation required
7. 7

   Bidders to submit details of location(s) where local value addition is made as per Clause 29.2 (a) of "ECR Instruction to Tenderers and General Conditions of Tenders For Supply Contracts (v. 3.0 issued on 06.03.2024). In case no details are furnished, it will be presumed that works address(es) of manufacturing in India are the location(s) of local value addition.

   Document requiredConfirmation required
8. 8

   All bidders shall confirm declaration as below in compliance of restrictions under Rule144 (ix) of GFR- 2017 and as per Clause 3 2 . 5 o f "ECR Instruction to Tenderers and General Conditions of Tenders For Supply Contracts (v. 3.0 issued on 06.03.2024)" :-a) I have read the c l a u s e r e g a r d i n g restrictions on procurement from a bidder of country which shares a land border with India. b) I certify that this bidder is not from such a country or, if from such a country, has been registered with the competent authority. c) I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the competent authority is attached). If the bidder fails to give such declaration, as above, then it will be presumed that the contents of above declaration have been read and unconditionally agreed and accepted by the tenderer. If any tenderer is not agreeable to this declaration they have to categorically mention about the disagreement in Techno Commercial Deviation.

   Document requiredConfirmation required
9. 9

   Vendors claiming to avail benefits and preferential treatment extended to Micro and Small Enterprises [MSEs] must necessarily upload relevant documents with their offer in terms of Clause 3.0 of "ECR Instruction to Tenderers and General Conditions of Tenders For Supply Contracts (v. 3.0 issued on 06.03.2024)". The extant Public Procurement Policy of the Government of India, Micro and Small Enterprises (MSEs) having current and valid UDYAM registration are entitled for benefits and purchase preferences extended to them. MSEs who are interested in availing themselves of these benefits must upload UDYAM registration certificate with their offer

   Document requiredConfirmation required
10. 10

    The tenderers in their bids shall indicate the details of their jurisdictional assessing officers (Designation, Address & e-mail ID).

    Document requiredConfirmation required
11. 11

    Please indicate HSN Code for the offered product.

    Document requiredConfirmation required
12. 12

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document requiredConfirmation required
13. 13

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

1. 1

   Bidders must quote on firm price basis only as price is not subject to any variation. Offers quoted with Price Variation Clause (PVC) will be considered unresponsive and will be summarily rejected.

2. 2

   Validity of Offer: Validity of offer should be strictly 60 days. Offers with lesser/conditional validity shall be deemed as commercially unresponsive and will be summarily rejected.