Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAdmitted-Finance | ₹1.3 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.3 Cr+₹3.3 L (2.53%)Admitted-Finance | ₹1.3 Cr+₹3.3 L (2.53%) | L2 | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | M/S SURYA ELECTRICALS L1 | M/s Ashu Brothers L2 |
|---|---|---|---|---|---|
| 1.00Providing and installation of LT ACB 800 Amp. with cabinet / structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :- | |||||
| 2.00 | 800 amp. 03 pole fixed manual ACB. | 1 | Nos. | 57,000 ₹72,96,000 Lowest | 58,000 ₹74,24,000 |
| 3.00 | Red/yellow/blue light indication | 1 | Sets | 250 ₹32,000 Lowest | 330.4 ₹42,291.2 |
| 4.00 | ON & OFF Indication | 1 | Nos. | 150 ₹38,400 Lowest | 283.2 ₹72,499.2 |
| 5.00 | Amp., Volt meter& energy meter digital | 1 | Nos. | 3,250 ₹4,16,000 | 2,714 ₹3,47,392 Lowest |
| 6.00 | Metering C.T 800/5A, | 1 | Nos. | 550 ₹2,11,200 Lowest | 584.1 ₹2,24,294.4 |
| 7.00 | Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg. | 1 | Nos. | 16,500 ₹21,12,000 | 15,500 ₹19,84,000 Lowest |
| 8.00Fabrication of aluminium bus-bar for each phases | |||||
| 9.00 | Incoming size 425 mm x 50mmx12 mm (twin) | 1 | Nos. | 450 ₹4,60,800 | 342.2 ₹3,50,412.8 Lowest |
| 10.00 | Out going size 720 mm x 50mm x 12 mm(twin) | 1 | Nos. | 550 ₹5,63,200 | 342.2 ₹3,50,412.8 Lowest |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
4 Oct 2023, 11:00 amClosed
SUPERINTENDING EINGINEER
S.E., EUDC-II, SECTOR-18, NOIDA
FOR CARRYING OUT THE WORK SUPPLY AND INSTALLATION OF 128 Nos. ACBs AT DIFFERENT DTs OF 33 11 KV SUBSTATIONS UNDER EUDD II (13 Nos) AND EUDD III (115 Nos.), NOIDA IN THE JURIDICTION OF EUDC-II, NOIDA
2023_PVVNL_839957_1
E-Tender No. 92/2023-24, EUDC-II, Noida
Open Tender
Electrical Works
Item Rate
90 days
S.E., EUDC-II, SECTOR-18, NOIDA
ATTACHED IN DOC
2 documents required · 2 mandatory
₹5,900
S.E., EUDC-II, NOIDA
₹1.7 L
6 Oct 2023
18 Sept 2023
4 Oct 2023
18 Sept 2023
4 Oct 2023
18 Sept 2023
Amount
Providing and installation of LT ACB 800 Amp. with cabinet / structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-
800 amp. 03 pole fixed manual ACB.
Red/yellow/blue light indication
ON & OFF Indication
Amp., Volt meter& energy meter digital
Metering C.T 800/5A,
Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.
Fabrication of aluminium bus-bar for each phases
Incoming size 425 mm x 50mmx12 mm (twin)
Out going size 720 mm x 50mm x 12 mm(twin)
Neutral size 900mmx50mmx12 mm.
Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.
Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.
Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.
Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.
PROVIDING AND INSTALLATION OF CHEMICAL EARTHING FOR ACB (WITH ALL MATERIAL AND LABOUR) AFTER INSTALLATION RESISTANCE SHOULD BE LESS THAN ONE OHM. AS PER FOLLOWING (The all material and labour shall be provided by the contractor)
Providing of earth elctrode for chemical earthing Pipe in pipe type proper hot deep galvanization dia 50 mm length 3 mtr - 32mm x 6mm terminal connection hole dia 8mm The cavity between the pipe & pipe is filled with conductive mixture - for hermetically filling inside the cavity i.e. between secondary conductor & primary conductor, crystalline compound is to be injected in the electrode assembly. It is a combination of high conductivity metal alloys, copper & aluminum power, conductive carbon / cement and bonding material etc the electrode should be sealed from both the ends. The outer pipe of the elctrode should be galavanized the characteristics of this compound is highly cnductive, non magnetic & non corrosive in G.I. Including providing of backfill compound each elctrode should be supplied with bags of 25 kg x 2 bfc compound (ground resistance enhancement powder 50 kgs each CPRI tested for LT ACB installed at different DTs.
Providing and fixing of GI strip of size 32 mm x 6 mm suitable for LT ACB installed at different DTs.
Providing and fixing of PVC Pit covers for above earthing electrode terminals.
Providing AND FIXING of Al. Lug size 400mm./800mm AS PER SITE REQUIREMENT.
M/s Ashu Brothers
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .