Construction of Toilet at Govt High School Lopara under Bio Diversity Management plan 2023

Amount

Earth work in excavation by manual means in trenches for foundations etc. (not exceeding 1.5 min width) and for shafts,wells,cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Random Rubble masonry with hard stone in foundation and plinthincluding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 grade stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone

Centering and shuttering including strutting, propping etc. and removal of formwork

Centering and shuttering including strutting, propping etcEdges of Slabs under 20cm Wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

15 mm thick Cement plaster in 1:6 ( 1 cement:6 fine sand ) mix

Dry stone pitching (any thickness) Including cost of stones

Cement concrete flooring in (1:2:4), finishing with a floating coat of cement slurry, but excl. the cost of nosing of steps etc. complete.50mm thick.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge.Second kail wood

Applying priming coat:with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades.

Making plinth protection 50mm thick with cement conc .(1:3:6) ,20 mm nominal size of stone aggregates over 75mm bed of dry brick ballast, 40mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls whereverrequired:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brasspillar taps

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm PVC "P" or S-trap,10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc (INTERNAL WORK-Exposed on wall (15 mm dia. nominal bore)

Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc. (external work) 20 mm dia. Gl pipe Medium)

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighingnot less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 (15 mm nominal bore)

Providing and fixing PVC waste pipe of sink or wash basin including PVC waste fitting complete. 32 mm dia

Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap.

Providing and fixing PVC soil waste / rain water disposal pipe 100mm dia

Providing and fixing PVC Bend 100 MM dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 15mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.100 mm Dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 75mm Dia

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Brass handles 125 mm

Rectangular shape mahole lid 500x500 mm

PTMT Soap dish / holder 138x102x75 mm

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete15 mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls. 20mm nominal bore

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 15 mm nominal bore, weighing not less than 32gms

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 20 mm nominal bore

P/F of Electrification passing through plastic channells conduitss in 3/20 7/16 & 7/20 wire incld. Cost of channels.conduits.nails.wiring ctc & labour charges comp job.Providing and fixing Service Line(Aluminium 10 sq m)

P/F of Electrification passing through plastic channells conduitss in 3/20 7/16 & 7/20 wire incld. Cost of channels.conduits.nails.wiring ctc & labour charges comp job.MCB-6-32 Amp

P/F of Electrification passing through plastic channells conduitss in 3/20 7/16 & 7/20 wire incld. Cost of channels.conduits.nails.wiring ctc & labour charges comp job.MCB-6-40 Amp

Providing and fixing Wiring for light point exhaust fan point cething fan point with 1.5/2.5/4 sqmm FRLS PVC insulated copper conducter single core cable in surface/recessed medium class PVC conduit, with modular switch modular plate suitable Gl box as required Make - Anchor Havells or equivalent

Providing and fixingfollowing size modules.GI box alongwith modular base & cover plate for modular switches in recess etc & supplying and fixing following modular switch socket on the existing modular plate & switch box including connection for HEATING points etc as required: 6 Mobules 200 x75 mm

Providing and fixingfollowing size modules.GI box alongwith modular base & cover plate for modular switches in recess etc & supplying and fixing following modular switch socket on the existing modular plate & switch box including connection for HEATING points etc as required: 6 pin 15/16 socket outlet and 15/16A Switch

Providing and fixingfollowing size modules.GI box alongwith modular base & cover plate for modular switches in recess etc & supplying and fixing following modular switch socket on the existing modular plate & switch box including connection for HEATING points etc as required: 5 pin 5/6 socket outlet and 5/6 switch

Providing and fixing suitable size 3 Module GI Box with modular plate and cover infront including providing 5 pin 5-6 A modular switch socket including connection etc, as required. Make - Anchor/Havells or equivalent.

Providing and fixing following 5 pin 5/6 A modular switch/socket on the existing modular plate and switch box including connection ete as required. Make:Anchor lavells or equivalent.

CFL. saver 14 watt of approved quality Make:- Anchor Havels Orient etc

Providing Installation testing and commissioning of Exhaust of Bajaj, Orient Khaitan, Usha or Polar brand and manufacturers

Carraige of material Sand & Bajri by Mechanical Transport 60 KM including loading & 4 km by H/L unloading complete

carraige of material Stone by Headload including loading unloading complete 1.00 km

carraige of material BRICK by Mechanical Transport 326 KM & 4 km by H/L including loading unloading complete

carraige of material Steel by Mechanical Transport 60 km by and 4 km by H/L including loading unloading complete

Mohd Aslam

Umar Rasool

mohd akbar shah

Susheela Devi W/O Rakesh Kumar

Som Nath Thakur