Maint and repair work to various bldg at Med Regt Transit camp and other Minor units under AGE BR-I of GE Partapur

Amount

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets.

M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling complete all as specified

M&L for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls complete all as specified

M&L 3 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in wall panelling, complete all as specified and directed.

M&L 3 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in ceiling works, complete all as specified and directed.

S&F for 5mm thick PVC sheet of any pattern as in strips & channels feathered at edges for fixing to wall lining inclusive of solvent cement and fixing at site etc complete all as specified and as directed by Engineer-in- charge.

Dismantling timber framed in fillets,rails, posts rafters,purlines, etc under 40 sq cm in section

M&L second class Hardwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm.

M & L for 12mm width teak wood lipping 6 mm thick for Patical board/block board complete fix with nail.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified

Taking down shutters of any description not exceeding 1.00 sqm each and removing from site all as specified

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening complete all as specified & directed.

M&L for resecuring or easing & adjusting shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm without taking down complete all as specified & directed.

S&F 35 mm thick factory made 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panelsof 9mm thick BWP commercial; ply or 12mm thick veneered p article boards on both sides. The size of rail and style as per IS-1003 (part-I) kiln seasoned and chemicaly pressure treated.

S&F, 25 mm thick 2nd class Hardwood glazed and skeleton shutters, open reabeted and prepare to received glass fitted with cut and mitred beads for secuing glass for ventilators.

M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer.

S& F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specefied.

S&F butt hinges 100mm,heavy weight,cold rolled mild steel complete all as specefied and as directed.

S&F butt hinges 75mm,heavy weight,cold rolled mild steel complete all as specefied and as directed.

S&F 100mm aluminium handles,cast type,anodised complete all as specefied and directed.

S&F 75mm aluminium handles,cast type,anodised complete all as specefied and directed.

S&F 100mm long aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specefied and as directed.

S&F 150mm long aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specefied and as directed.

Taking down steel water tubes of size 20mm bore and connection including cleaning for refixing or removal to store complete, all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from steel or wooden frames or stone, concrete or brick surroundings; glazing with putty or fixed with beads complete all as specified & directed by Engineer-in-Charge

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty / wooden beading in square exc 0.5 sqm each panes complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L non skid ceramic tile 7 to 8 mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc 0.18Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick CM 1:4 screed bed for laying floor all as specified and directed.

M&L HDF laminated wooden floor tiles of 8 mm thick with dove tailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer instruction including dismatling of old wooden flooring of any description complete all as specified and directed.

M&L for white glazed ceramic tiles in vertical surface 300X200X7 mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:3 and pointed in white to match complete.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-charge.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws

S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L Preparatoion of new steel surface and and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces, complete all as specifeid and directed by engr-in-charge

Deduct Schedule of Credit of Rs (-) 82,650.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

Dawa Enterprises

M.S Sharma Enterprises