Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹13.4 L
Closing Date
3 Oct 2025, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Rajakumar S Biradar
a) Replacement of 2x12.5MVA, 66/11 KV Power Transformer by 2x20MVA 66/11 KV Power Transformer along with additional switchgear at 66/11KV MUSS UP Halli, in H.B.halli Taluk, Vijayanagara District. b) Providing Additional 1 X 20MVA, 66/11kV POWER TRANSFORMER at 220/66/11KV Neelagunda Sub-Station in Harappanahalli Taluk, Vijayanagar Dist
KPTCL/2025-26/SS/WORK_INDENT2446
KPTCL/2025-26/SS/WORK_INDENT2446
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CGM Tech Corporate Office Bengaluru
5 documents required · 4 mandatory · 1 optional
Documentary proof for clause no.3.2 (b)(i) of ITT, such as P.O, LOI, LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive or Divisional Engineer
GST registration, PAN etc., in the State of Karnataka mandatorily at the time of execution of the Contract Agreement of the Tenderer as per clause no. 3.10 (xiii) of ITT
Documentary proof for cl. no. 3.2 (a) of ITT (Financial Turnover): Audited Financial statements including Balance sheets, P&L statements, Turnover certificates and Auditors Reports of the last five years preceding the date of bid submission of the Bidder duly certified by chartered Accountant
Documentary proof for Clause No: 3.6 of ITT: Assessed available tender capacity such as, Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years taking into account the completed as well as works in progress and Statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent as sought in Note of the said clause in the prescribed format as in clause No: 1.5 of Qualification Information
Self-declaration as sought in Clause No. 3.6 Note (ii) of ITT by the Bidder stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct
Documentary proof for Cl. No: 3.3 (b) of ITT (ie., Liquid Assets and /or availability of credit facilities) such Bankers Certificate duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and Details in Sch-5(9 of 5) of Techno-commercial sheets signed by authorized person
Scanned copy of the Bank Guarantee towards EMD as per 13.1 of ITT
Valid Super grade Electrical Contractors License issued by the Government of Karnataka as per clause no.2.3 of ITT
Power of Attorney in favor of all the persons signing the documents and a certified copy by the Company Secretary/ Authorized Signatory for power of attorney holder shall be attached as evidence for authentication as in Annexure X1
Letter of Undertaking for Bid validity as per Annexure-V of Section-4
Certificate of Incorporation of the Individual or any relevant document in respect of Partnership/Proprietorship firms as per the tender document
No Deviation Certificate as per Annexure-I of Section-4
Undertaking to source the supply of equipment/material from KPTCL approved Vendors only
Certificate is to be uploaded by the Tenderer agreeing to source the equipment/ material for the work from the Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India as per Annexure -XVII of Section-4
Self-declarations in respect of Litigation, dis-qualification/Black listed due to non-performance & Risk & cost, Country which shares a land border with India as per clause no. 2.4 (b), (c), (d) & (e) of ITT
The Qualification and experience of proposed Key Personnel for carrying out the Work
Description of the Tools & Plant available with them for execution of the Work
The Tenderer shall upload declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets
Information on litigations in which the Tenderer is involved as per prescribed format as at 1.12 of Qualification Information
Filled in Techno commercial sheet shall be uploaded along with all other QR documents. Price Offers shall be quoted in the item-wise bid Financial offer, provisioned in the e-procurement portal. In case the Prices are uploaded in/along the Techno commercial Bid, then Bid will be summarily rejected. The Techno-commercial sheets shall be uploaded in KPTCL excel formats only
proposed methodology and program of construction as per clause No.1.13 of Section-3-Qualification Information
Type test reports as per tender documents / technical specifications
All details as called for in the Technical specifications of all the equipments/ materials of the Tender
Any other required documents as per the qualifying requirements, terms and conditions of the tender, NIT & Technical specifications
Certificate/Self declarations is to be uploaded as in Annexure-XVI & Annexure XVII
All Self-Declarations, legally enforceable deeds, Undertakings as per tender documents
₹7,500
₹13.4 L
22 Aug 2025
22 Aug 2025
4 Oct 2025
6 Sept 2025
5 Sept 2025
POWER TRANSFORMERS:
a) 20MVA, 66/11kV, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC p...
FIRE FIGHTING EQUIPMENTS:
Supply, Erection, Testing & Commissioning of Nitrogen Injection fire extinguishing system as per the recommendation of the supplier of the fire fighting system for Power Tran...
SF6 gas circuit breaker with pneumatic spring type operating mechanism, with capacity trip device, including mounting structures, arrangements with rigid, bimetallic terminal connectors complete sui...
Isolators including marshalling box and terminal connecters as per technical specification with solid core cylindrical post insulators with terminal connectors suitable for Drake and hardwares.
ISOLATORS : Isolators including marshalling box and solid core cylindrical post insulators.
A) 11KV isolator, Double Break 1200A, GOS with rigid bimetallic terminal connector suitable for Drake ACSR
B) 11KV isolator, Double Break 800A, GOS with rigid bimetallic terminal connector suitable for Drake ACSR
c) 11KV isolator, 400A 25kA with rigid bimetallic terminal connector suitable for Drake ACSR
d) 11kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.
e) 11KV isolator, Double Break 400A , 25kA capacity with rigid bimetallic terminal connector suitable for Coyote ACSR for feeders/capacitor bank
CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor, as per Technical Specicification.
ii) 66kV Class, 31.5 kA, CT ratio 200-100/1-1-1A for Transformer. For differential/Distance protection: Accuracy PS class, Vk-800v, Rct-2 ohm at 200/1A. For metering: Accuracy class 02, Burden 10VA. F...
11 KV Neutral CT: 11 KV Class, 25KA, NCT of ratio 1200-800/1-1-1A for REFR protection. (of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos. o...
11V Current Transformer of ratio 1200-800/1-1-1A for incomer (03Nos Set)
SURGE ARRESTOR : (Procelain/Polymer) metal oxide, gapless type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications.
1) 60 kV, 10 KA, Class-II Normal Duty ...
9 kV, 05/10 KA Station Class with connectors and Clamps(Metal oxide type)
Control and Relay Panel Complete-Control & Relay Panel complete as per specification compatible to IEC 61850, communication protocal for station automation system in 220KV S/S as per approved drawing;...
Control and Relay Panel Complete -SCADA Compatible per specifications:
Simplex type control and relay panels complete as per specifications.
1) For Power Transformer 66/11KV
11KV Line Type -1L (As per Annexure RPPI-SAS)(Provision for 2 feeders to be made in one panel)
11KV ODS and take off structure: i) Double pole with 9 Mtr RCC poles of working load 145kgs including H frame suitable for mounting roaster GOS/DB Isolators with provision for fixing 9 KV lightning a...
STATION STRUCTURES :11kV ODS structure: Column out of 9.0 Mtr long RCC pole for 300kgs working load (using TOR steel) for 11kV ODS
Beams out of Galvanized iron channel size 100x50mm with arrangement for stringing power conductor on 11KV side 1B1 7.45Mtr long with clamps,bolts and nuts.(0.071), 8Nos/0.5712MT
Beams out of Galvanized iron channel size 100x50mm with arrangement for stringing power conductor on 11KV side 1B2 4.0Mtr long with clamps,bolts and nuts.(0.038), 22Nos/0.8316MT
Double pole structure with 9.0 Mts RCC poles WL 145Kgs for mounting 11KV 400 A Isolators and 9KV , 5A Surge arrestor.(03 No) complete set
MOUNTING STRUCTURES ( unit Weight in MT add 5% for B&N:
a) i) 66 kV Isolator Live point height 5500 mm (0.724 MT per Structurex02Nos=1.448MT), Note: Mounting Structures fabricated out of Galvanised M...
Current transformer 66 kV & NCT's (0.142 MT per Structurex04Nos=0.568MT)
Lightening Arrestors. 66 kV. (0.069MT per Structurex03Nos=0.207MT)
66KV Pedestal insulator for 66 kV side. (0.1400MT per Structurex06Nos=0.84MT)
High Pedestal insulator for 66 KV side (0.2200MT per Structurex03Nos=0.66MT)
11 KV Cable terminating structure for LV Side of 110/66/11KV Tr. (0.069 MT per structure) & 11kV UG cable terminating structure for LV side of transformers (0.072 MT per structure x 04Nos=0.288MT)
For High post insulators: 66kV side (0.147 MT per structure x 12Nos=1.76MT)
Total Weight of supply of Bolts & nuts for above Mounting Structures as per Technical Specification.
RIGID BUS WITH TAPS & CLAMPS: RIGID BUS : Aluminium Tube conforming to 6340 WP of IS -5082/1969 (BS 1600-Sch.40) of 63 mm Size - 66KV Side
BUS BAR FORMATION: a) Drake ACSR
Single tension string using 2 units of each 11kV, 90KN Disc insulator along with Bolted type tension clamp and hardware suitable for Drake ACSR, 11kV side
Single tension string using 1units of each 11kV, 90KN Disc insulator along with Bolted type tension clamp and hardware suitable for Coyote ACSR, 11kV side
Single suspension string using 2units of each 11kV, 90KN Disc insulator along with Suspension clamp and hardware suitable for Drake ACSR, 11kV side
C type wedge connector suitable for Coyote-Drake
C type wedge connector suitable for Coyote-Coyote
Pad clamps for Drake
Pad clamps for Coyote
PG Clamps for Rabbit ACSR
1.1kV Grade PVC Insulated armoured Copper Control Cable of sizes, with Lugs/Ferrules/Gland as per technical specifications
19C X 2.5 Sq.mm
10 C X 2.5 sq.mm
2 C X 2.5 sq.mm
11KV U.G Cable: 11KV XLPE, 1x1000Sq mm Alluminium cable
11KV XLPE, 240Sq mm Alluminium cable- 3Core from 11KV Switchgear to 11KV takeoff strcutures
Cable Termination kits suitable for following sizes as per Technical Specification. a) 1000 sq.mm-single core, i) Indoor
b) 240 sq.mm-3 Core, i) Indoor
Heat shrinkable type cable termination kits suitable for 1000 sqmm XLPE cable, Outdoor type
ii)Bolted type Single Tension of 120KN, 6 units each along with hardware suitable for Drake ACSR
iii) Single Suspension of 90 KN, 6 units each along with hardware suitable for Drake ACSR
Hardwares: i) C-Type wedge connector suitable for Drake -Drake
ii) Post Insulator clamp suitable for single Drake ACSR and 66KV solid core Insulator
iii) Post Insulator clamp suitable for single Drake ACSR and 33KV solid core Insulator
iv) Terminal connector for isolator to receive 2.5 IPS Alluminium tube flexible type
v) Clamps for Alluminium tube suitable for BPI for both main bus & Interconnecting bus, a) 2.5 IPS Alluminium tube rigid type
vi) T clamp suitable for connecting 2.5 IPS Al. Tube of 2.5" IPS Al. Tube
Equipments for establishingSCADA communication: Cables-Supplying and Laying: Current cables-Copper Core with c/s : 4.0 Sqmm Multistrand 7 core
Voltage cables-Copper Core with c/s 2.5 Sqmm Multistrand 4 core
Signal cables-armoured Copper Core with c/s 0.5 Sqmm Multistrand 10 core
Control cables-Copper Core with c/s 1.5 Sqmm Multistrand 10 core
One number with 8 input and output points for 110V DC to 48V DC Opto coupler mounted within the RTU panel for indication (as per market value)
MFT 3 phase 4 wire 110V, 1A, 50Hz self powered with RS 485 compatible to MODBUS protocal for 11kV Switchgear panel 5F+1AP )as per market value)
RJ-45 cable for Energy meter integration to DCU (market rate)
Terminal Blocks (Knife type)
Contact multimeter Relay (CMR)-48 V DC 3 No.+3 NC contact
Maintenance Tools and Plant and Miscellanaous Items: Hydraulic crimping tools upto 1000 Sqmm
Insulation megger 2.5-5 kV
Rubber mats 2000mm X 1000mm X 12mm size suitable for 1.1kV class (market rate)
Equipment name plates and earthing name plates including fixing at outdooryard
Solid Core Post Insulator 66KV class
Station Erection
POWER TRANSFORMERS:
a) 20MVA, 66/11kV, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC p...
SF6 gas circuit breaker with pneumatic spring type operating mechanism, with capacity trip device, including mounting structures, arrangements with rigid, bimetallic terminal connectors complete sui...
Isolators including marshalling box and terminal connecters as per technical specification with solid core cylindrical post insulators with terminal connectors suitable for Drake and hardwares.
ISOLATORS : Isolators including marshalling box and solid core cylindrical post insulators.
A) 11KV isolator, Double Break 1200A, GOS with rigid bimetallic terminal connector suitable for Drake ACSR
B) 11KV isolator, Double Break 800A, GOS with rigid bimetallic terminal connector suitable for Drake ACSR
c) 11KV isolator, 400A 25kA with rigid bimetallic terminal connector suitable for Drake ACSR
d) 11kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.
e) 11KV isolator, Double Break 400A , 25kA capacity with rigid bimetallic terminal connector suitable for Coyote ACSR for feeders/capacitor bank
CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor, as per Technical Specicification.
ii) 66kV Class, 31.5 kA, CT ratio 200-100/1-1-1A for Transformer. For differential/Distance protection: Accuracy PS class, Vk-800v, Rct-2 ohm at 200/1A. For metering: Accuracy class 02, Burden 10VA. F...
11 KV Neutral CT: 11 KV Class, 25KA, NCT of ratio 1200-800/1-1-1A for REFR protection. (of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos. o...
11V Current Transformer of ratio 1200-800/1-1-1A for incomer (03Nos Set)
SURGE ARRESTOR : (Procelain/Polymer) metal oxide, gapless type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications.
1) 60 kV, 10 KA, Class-II Normal Duty ...
9 kV, 05/10 KA Station Class with connectors and Clamps(Metal oxide type)
Control and Relay Panel Complete-Control & Relay Panel complete as per specification compatible to IEC 61850, communication protocal for station automation system in 220KV S/S as per approved drawing;...
Control and Relay Panel Complete -SCADA Compatible per specifications:
Simplex type control and relay panels complete as per specifications.
1) For Power Transformer 66/11KV
11KV Line Type -1L (As per Annexure RPPI-SAS)(Provision for 2 feeders to be made in one panel)
Switchgear: Porcelain clas 11kV VCB outdoor type, KIOSK, 350 MVA rupturing capacity, 1250 A (1250 A for Incomer and 800 A for feeders) comprising of 2I+5F+1AP annunciation panel with CT's & PT's etc.,...
11KV Switchgear : 11KV class Switchgear, 500MVA, 1600A for incomer and 1250A for feeders (IC+6F+1B/C+1AP). Annunciator panel shall be simplex panel instead of Desk type mentioned else where in the sp...
11KV ODS and take off structure: i) Double pole with 9 Mtr RCC poles of working load 145kgs including H frame suitable for mounting roaster GOS/DB Isolators with provision for fixing 9 KV lightning a...
STATION STRUCTURES :11kV ODS structure: Column out of 9.0 Mtr long RCC pole for 300kgs working load (using TOR steel) for 11kV ODS
Beams out of Galvanized iron channel size 100x50mm with arrangement for stringing power conductor on 11KV side 1B1 7.45Mtr long with clamps,bolts and nuts.(0.071), 8Nos/0.5712MT
Beams out of Galvanized iron channel size 100x50mm with arrangement for stringing power conductor on 11KV side 1B2 4.0Mtr long with clamps,bolts and nuts.(0.038), 22Nos/0.8316MT
Double pole structure with 9.0 Mts RCC poles WL 145Kgs for mounting 11KV 400 A Isolators and 9KV , 5A Surge arrestor.(03 No) complete set
MOUNTING STRUCTURES ( unit Weight in MT add 5% for B&N:
a) i) 66 kV Isolator Live point height 5500 mm (0.724 MT per Structurex02Nos=1.448MT), Note: Mounting Structures fabricated out of Galvanised M...
Current transformer 66 kV & NCT's (0.142 MT per Structurex04Nos=0.568MT)
Lightening Arrestors. 66 kV. (0.069MT per Structurex03Nos=0.207MT)
66KV Pedestal insulator for 66 kV side. (0.1400MT per Structurex06Nos=0.84MT)
High Pedestal insulator for 66 KV side (0.2200MT per Structurex03Nos=0.66MT)
11 KV Cable terminating structure for LV Side of 110/66/11KV Tr. (0.069 MT per structure) & 11kV UG cable terminating structure for LV side of transformers (0.072 MT per structure x 04Nos=0.288MT)
For High post insulators: 66kV side (0.147 MT per structure x 12Nos=1.76MT)
Total Weight of supply of Bolts & nuts for above Mounting Structures as per Technical Specification.
RIGID BUS WITH TAPS & CLAMPS: RIGID BUS : Aluminium Tube conforming to 6340 WP of IS -5082/1969 (BS 1600-Sch.40) of 63 mm Size - 66KV Side
BUS BAR FORMATION: Formation of Main/Cross bus with Single Drake (under LC)
Formation of Main/Cross bus on 11kV side with single Drake
Formation of Main/Cross bus with single Coyote for 11kV
1.1kV Grade PVC Insulated armoured Copper Control Cable of sizes, with Lugs/Ferrules/Gland as per technical specifications
19C X 2.5 Sq.mm
10 C X 2.5 sq.mm
2 C X 2.5 sq.mm
11KV U.G. Cable: 11KV XLPE, 1x1000Sq mm Alluminium cable
11KV XLPE, 240Sq mm Alluminium cable - 3 Core
(from 11KV Switchgear to 11KV takeoff strcutures)
Heat shrinkable type cable termination kits suitable for 1X1000 sqmm XLPE cable (Outdoor type)
Equipments for establishingSCADA communication: Cables-Supplying and Laying: Current cables-Copper Core with c/s : 4.0 Sqmm Multistrand 7 core
Voltage cables-Copper Core with c/s 2.5 Sqmm Multistrand 4 core
Signal cables-armoured Copper Core with c/s 0.5 Sqmm Multistrand 10 core
Control cables-Copper Core with c/s 1.5 Sqmm Multistrand 10 core
RJ-45 Cable for Energy meter integration to DCU
Integration of RTU, DCU, UPS with field equipment
Formation of Earthmat Excavation, refilling., etc
Supplying and laying of MS Flat(50x6) flat welding and applying ACB Paints to welded portion and covering with sodium benotite clay, as per drawing /standard (all other materials to be supplied by con...
Providing 25mm dia, 1.05 mtr long Earthmat Spike of MS Rod including bending top 50mm etc.
Supplying and Grounding of equipments with 50X6 mm G I flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor
Providing cast iron pipe of 100mm ID 13mm thickness 2.75mtrs long with 2 part G I flat 50X6 mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by contracto...
Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits(15+12=27Nos).
1) DECOMMISSIONING
Dismantling of 2x10 MVA, 110/11 kV, Transformer with accessories complete with oil etc., as per direction of site Engineer(WORK-A)
(37x02Nos=74MT)
Moving of Transformer from the plinth to the loading point as per direction of site Engineer.(37x02Nos=74x50Mtr=3500t/MT), Note: Take actual movement of the transformer after completion of Dismantling...
Releasing of C&R Panel of existing 12.5MVA, 66/11kV Transformer
Releasing of 11KV Bank-2 Announciator Panel
Releasing of existing 66kV Oil filled CT ration: 75-150-300/1-1-1A of power transformer-1
Releasing of existing 11kV Oil filled bank CT's ratio: 800-400/1-1-1A
Releasing of existing 11kV NCT ratio: 800-400/1-1-1 A
Releasing of existing 11kV Bank-1 & 2 PCVCB breaker
Releasing of 11kV, 400 A Bank GOS
Releasing of 11kV Bus Bar 1&2
Station & yard lighting (outdoor) (To be designed, assessed & quoted by the bidder): Supply and Erection, Design of Station yard illumination in confirmity with the illumination levels mentioned in th...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and t...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: one coat on old work including primer coat as per specifications and as per directions of Engineer i...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8...
Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required No...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps One way switch
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing mem...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
vendor approval Guidelines.pdf
Others - Circulars • 0.95 MB
pre tender meeting.pdf
Others - Pre bid meeting proceedings • 0.08 MB
1 Advisory Note to Bidders.pdf
Instructions to Tenderers • 1.02 MB
NIT.pdf
Instructions to Tenderers • 0.88 MB
techno commercial FInal.xlsx
Techno-Commercial Worksheet • 0.60 MB
Tender Doc.docx
Tender Document • 0.44 MB
Cirular for acceptance of TypeTest of ERDA.pdf
Others - Circulars • 0.07 MB
Circular for Vendor Approval labaratories for Drawing GTP etc.pdf
Others - Circulars • 0.35 MB
KPTCL Revised stamp duty circular.pdf
Others - Circulars • 0.82 MB
KPTCL e BG circular.pdf
Others - Circulars • 0.23 MB
Technical Specification-Given to DO_Technical Specification of SCADA Comm Equip_Technical specification RTU_Revision1.pdf
Technical Information / Worksheet • 1.00 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_11kV switchgear_11kV swg spec for BMAZ area_Switchgear Spec Rev MCVCB 31 5 MVA.pdf
Technical Information / Worksheet • 0.45 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_11kV switchgear_11kV swg spec for BMAZ area_Switchgear Spec Revised MCVCB.pdf
Technical Information / Worksheet • 0.36 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_11kV switchgear_11kV swg spec for BMAZ area_Switchgear Spec Revised PCVCB.pdf
Technical Information / Worksheet • 0.50 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_11kV switchgear_11kV swg spec for BMAZ area_~$itchgear Spec Revised MCVCB(31.5 MVA).doc
Technical Information / Worksheet • 0.00 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_11kV switchgear_11kV swgspec other than BMAZ area_Switchgear Spec Revised MCVCB.pdf
Technical Information / Worksheet • 0.43 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_11kV switchgear_11kV swgspec other than BMAZ area_Switchgear Spec Revised PCVCB.pdf
Technical Information / Worksheet • 0.46 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section 11kV Capacitor bank.pdf
Technical Information / Worksheet • 0.95 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section 11kV class double break Isolator.pdf
Technical Information / Worksheet • 0.09 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section 1pt1kv Grade power and control cable.pdf
Technical Information / Worksheet • 0.33 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section 66kV and 110kV Control Relay Panels logic of LBB included.pdf
Technical Information / Worksheet • 0.92 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section Circuit Breaker.pdf
Technical Information / Worksheet • 0.49 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section GTR.pdf
Technical Information / Worksheet • 0.55 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section Isolator.pdf
Technical Information / Worksheet • 0.33 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section Lighting system.pdf
Technical Information / Worksheet • 0.47 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section LTAC and DC Panel.pdf
Technical Information / Worksheet • 0.31 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section Surge Arrestor.pdf
Technical Information / Worksheet • 0.13 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section Switchyard Erection.pdf
Technical Information / Worksheet • 0.74 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section Testing and Commissioning.pdf
Technical Information / Worksheet • 0.27 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section 110V Battery and Battery charger 200AH.pdf
Technical Information / Worksheet • 1.00 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section 11kV Special GOS.pdf
Technical Information / Worksheet • 0.21 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section 20 MVA and below power transformer.pdf
Technical Information / Worksheet • 1.31 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section Aux Tranformer.pdf
Technical Information / Worksheet • 0.72 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section Fire protection system.pdf
Technical Information / Worksheet • 0.38 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section Furniture.pdf
Technical Information / Worksheet • 0.07 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section Instrument Transformer.pdf
Technical Information / Worksheet • 0.62 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section Structures.pdf
Technical Information / Worksheet • 0.18 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Section- HT UG Cables.doc
Technical Information / Worksheet • 0.17 MB
Technical Specification-Given to DO_Technical Specification Sub Station Portion_Technical specifications of ABT Energy meter.pdf
Technical Information / Worksheet • 5.92 MB
Technical specification RTU_Revision1.pdf
Others - Technical Specifications • 1.00 MB
Circular for sand.pdf
Others - Circulars • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .