Procurement of portable petrol/diesel fire pumps at 2x600MW,SSTPP, MPPGCL, Dongalia. As per attached Schedule.

Portable single stage centrifugal fire pump made of sea water resistant aluminium alloy having one 100 mm dia male round threaded suction inlet and two 63 mm dia instantaneous female delivery outlets along with suitable rotary vane/exhaust ejector priming system to lift water from 7 m depth with petrol driven prime mover, battery and self with push button operated, battery and charger, completely fitted on light weight tubular frame and necessary accessories. Other Specifications: a) Engine – Diesel or Petrol operated twin cylinder air cooled 18 BHP or more @ 3600 RPM with self start and fuel tank capacity not less than 1.5 hours run. b) Pump – Single stage Centrifugal pump as above maximum discharge 1400 LPM. Maximum discharge pressure 7 bar (350 LPM) pump will comply general requirement as per EN 14466:2005 c) Primer – Rotary Vane/Exhaust ejector primer able to lift water from 7 m depth within 30 seconds at NTP condition. d) Dimensions – LXBXH = 670 x 550 x 670 mm (+_10%) approx. e) Weight – Dry weight without battery not exceed to 85 Kg (+_10%). f) Control Panel – C.P. consists of following instruments control and gauges. 1. Throttle Control 2. Primer Control 3. Ignition Interrupter switch 4. Pump suction compound gauge 5. Pump delivery pressure Gauge 6. Battery charging indicator 7. Adjustable flood light 8. Engine oil pressure Gauge 9. Panel Board light g) Marking – Manufactures detail with output weight, year, Sr. No. & Engine no must be marked/embossed. h) Test – Pump will be tested for 4 hours endurance test, deep lift test. i) Accessories: (1) Tested superior quality PVC/Rubber suction hose 100mm dia x 2.5 mtr. Along with male and female G.M. couplings – 2 Nos. (2) Brass/Gun Metal suction strainer 100 mm – 1 Nos. (3) Basket Strainer – 1 No. (4) Suction wrenches – 2 pair (5) Tool Kit – 1 No.