REPAIRS TO LEAKAGE/SEEPAGE, FLOORING, PLASTERING ETC. AND MISC B/R ITEMS IN ARMY AREA MOUNT ABU UNDER AGE(I) UDAIPUR

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

Material and labour for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor

Material and labour for Non-skid jointless Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 all as spd and directed.

Material and labour for Non - skid ceramic light coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 all as spd and directed.

Material and labour for Glazed ceramic light coloured tiles in vertical surfaces of size 300x600x7-8 mm thick thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering with CM 1:4 all as spd and directed.

Material and labour for Virified double charged ceramic light coloured tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc over and including 15mm thick screed bed or bedding layer with CM 1:4 all as spd and directed.

Material and labour for Virified double charged ceramic light coloured tiles 8-9 mm thick (square/ rectangular) polished, size of tiles 600x100x8-9mm thick in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc over and including 10mm thick rendering with CM 1:4 all as spd and directed.

Material and labour for granite 18mm thick (Jet/Telephonic black) work (table rubbed and polished) in steps, pillars, window cills, cooking platforms including half round moulding as reqd, making hole for gas pipe etc. and like in cement mortar (1:4) incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick CM 1:6 screed bed.

Supply & fixing in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge. Make: Jaquar Essco/Cera/Coronet

Supply & fixing in repair Brass CP bath Mixer with 115 mm long bend pipe connection to overhead shower suitable 15mm bore of pipe and fixed. Make: Jaquar Essco/Cera/Coronet

Supply & fixing in repair 15mm bore 2 way angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. Make: Jaquar Essco/Cera/Coronet

Supply & fixing in repair CP jet spray with flexible tube etc complete all as specified & directed. Make: Jaquar Essco/Cera/Coronet

Supply & fixing in repair health faucet (hand shower) (ABS body) with 1.2 mtr long flexible tube and wall hook etc complete all as specified & directed. Make: Jaquar Essco/Cera/Coronet

Supply & fixing in repair brass chromium plated soap tray/dish fixed with CP screws etc complete all as specified. Make: Jaquar Essco/Cera/Coronet

Supply & fixing in repair toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws etc. Make: Jaquar Essco/Cera/Coronet

Supply & fixing in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge. (Make:Coronet/Prayag/plumber)

Taking down cement mortar plaster/terrazo of any thickness or any description on wall including racking out joints, hacking for key, scrubbing down with water etc complete as directed

Demolition of brick work or stone/boulder masonry built in cement mortar or concete work including all quoins, arches, pillars etc complete all as specified and directed.

Material and labour for brick work with sub class ‘ B’ Bricks straight or curved on plan exec 6 mtr mean radius with CM 1: 6

Material and labour for providing reinforced cement concrete 1:2 :4 type B1 using (20mm graded stone aggregate) as in cooking platform slab supported on wall, beam, cantilevers and kitchen cooking platform including necessary formwork complete all as specified.

Material and labour mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Material and labour for machine cut Kota stone slab 18-22 mm thick (of size not less than 55 cm x 55 cm in flooring and 120 cm x 25 cm in treads) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including half round edge moulding, cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:4) base including rubbing and mirror polishing, complete all as specified.

Material and labour for 10 mm rendering in cement mortar (1:3) on concrete surfaces of ceiling,finished even and smooth without using extra cement.

Material and labour for 10 mm rendering in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement.

Material and labour for 15 mm rendering in two layer, 10 mm thick in cement mortar (1:6) in dubbing coat and 5 mm thick in cement mortar (1:6) using water proofing compound @ 2 % by weight of cement in finish coat on other than fair faces of brick wall suerfaces, finished even and smooth without using extra cement complete.Note:- water proofing compound shall be measured and paid separately.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distember over a coat of alkali resistant priming paint & smooth surface with internal wall putty.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of weatherproof acrylic emulsion paint over a coat of primer paint etc complete.

Material and labour preparing new or old surface of wall and applying a layer of 1mm thick white cement based putty for neat and smooth finishing. (Make- Birla/Jk /Burger)

Supply & fixing in repair 15mm dia fancy type bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or union. (Make- Cera/Jaquar Essco /Coronet)

Supply & fixing in repairs, cromium plated concealed type stop cock 15 mm size. (Make- Cera/Jaquar Essco /Coronet)

Supply & fixing in repair 20mm dia Ball PTMT valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. (Make-Paryag/Polytuf/Pearl)

Supply & fixing in repair shower rose 100 m dia of chromium plated as approved by Engr-in-Charge( Make-Paryag/Polytuf/Pearl)

Supply & fixing in repairs 8mm thick glass shelf corner 200mm size including SS railing as approved by Engr-in-Charge.

Taking up or down GI water tubing with fittings including cleaning for re-fixing or removing from site of size

(a) 15 mm bore

(b) 20 mm bore

Supply and fixing of GI water tubing,medium grade with fittings,fixed to wall and ceiling or laid in floor of size

(a) 15 mm bore

(b) 20 mm bore

Cutting chases, pinning in, making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps cills for concealed water tubing and making good cutting n. exc. 10 cm girth in stone walls.

Supply & fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete. (Make-Nirali/Prayag/Jayna/Pearl)

Supply & fixing vitreous china wash down water closet pan pedestal pattern white incl flush pipe incl white seat cover with MS Cr plated hinges fixed in repair.

Supply & fixing vitreous china wash basin white flat back size 550 x 400mm with and including pedestal, PVC flexible waste pipe 32 mm, CP waste fittings, brackets or fixed to walls with anchor fastners all as specified and directed. (Make:Parryware/Hindware/Jaquar/Prayag)

Supply & fixing, in repairs vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe.

Taking down old vitreous china EWC and cistern and Supply & fixing vitreous china EWC one piece S concealed with Soft Close Seat Cover and Twin Flush Fittings Ivory colour fixed all as specified and directed. (Make -Cera/Jaquar Essco/Parryware/Hindware)

Supply and fixing in repair pillar taps cast copper alloy with capstan heads, chromium plated,fancy type of size 15 mm bore screwed down high pressure,with or without lettered'Hot' or 'Cold' with long screwed shanks and flynut,screwed for 15mm iron pipe. (Make -Plumber/Jaquar Essco/Coronet)

Supply & fixing in repairs CP brass towel rod 15mm dia fancy type 60cms long as approved by Engr-in-chare.

Disconnecting existing tanks exc 250 ltr but not exc 500 ltr, setting aside (or lowering if required) for repairs, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position.

Disconnecting existing tanks exc 500 ltr but not exc 1000 ltr, setting aside (or lowering if required) for repairs, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position.

Dismantling of water tanks of size exc 250 & not exc 500 litres capacity.

Dismantling of water tanks of size exc 500 & not exc 1000 litres capacity.

Supply & fixing for Rotational moulded polyethylene water storage tank of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. (Make:- Sintex/ Rotex/ Polycon/Vectus)

Supply & fixing for Rotational moulded polyethylene water storage tank of capacity exc 500 ltrs & not exc 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. (Make:- Sintex/ Rotex/ Polycon/Vectus)

Material and labour for preparation of new wooded surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Supply & fixing in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge. (Make: Parryware/Jaquar/Prayag)

Dismantling of existing roof treatment consisting of screed, tar felts, etc and removing building materials to a distance of 500m or under, beyond the lead incl in the rates incl loading, unloading and stacking at the destination complete all as directed.

Material and Labour for PCC 1:2:4 type B-0 using (12.5 mm graded stone aggregate) as in padding on roof top including WPC as per manufacturers instructions to achieve the slop required, with minimum thickness of 25mm consolidated and finished even and fair without using extra cement. (WPC shall be measured and paid separately)

Supply only liquid water proofing compound

Material and Labour for 10mm thick plaster in CM 1:4 with WPC will be applied over the roof slab. After the plaster is cured the roof will be tested for water tightness by pounding with water for seven days for any seepage/leakages etc. If any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment.

Material and labour for carrying out water proofing treatment for roofs in the following stages and as directed :-

(i) The surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, moss dust etc by wire brushing and dusting. For cast iron drain out lets a grove shall be cut around to tuck in the treatment. concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls), around obstacles such as pipes, chimneystacks, etc and other similar situation to ease up about comers.

(ii) Bituminous based primer conforming to IS : 3384-1965 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly impregnated.

(iii) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.

(iv) After the application of approved bituminous the APP modified polymeric membrane of thickness 3 mm & weight not less than 3.50 Kg/Sqm shall be laid & sealed on the Bbituminous surface by torch application as per manufacture instructions. The overlap while torching shall be 100mm in longitudinal direction and 100mm in transverse direction. All overlap joints shall be made as a monolithic layer. (Make-M/s STP Ltd/M/s Asian Ltd/ M/s IWL Ltd)

(v) A fillet of PCC 1:2:4 of 100 x 100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners/ junctions should be rounded. (vii) Applying two coats of silver shield aluminium based paint @ 0.1 Kg/Sqm each coat over APP membrane.

boon construction company