IMPROVEMENT TO CERTAIN BLOCKS OF AIRMEN SMQs AT CAMERO COMPLEX AT SUBROTO PARK

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing the debries outside the MOD land complete all as specified and directed by Engineer in charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slury with 3.0 kg/ sqm complete all as specified and directed by Engineer in charge

Dismantling stone slab and granite of any description or thickness in floors etc and removing the debries outside the MOD land complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar all as specified.

M&L Cutting out decayed brickwork and refacing with new bricks (1 course of headers to 3 courses of stretchers) and making good in CM 1:4 and removing the debries outside the MOD land complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with subclass 'B bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed.

M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for rendering in CM (1:6) 15 mm thick on fair faces of brick work or concrete surfaces and finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering fair faces CM (1:4) 15 mm thick using water proofing compound @ 2% of weight of cement as per manufactureres instruction on brick surfaces or concrete surfaces and finished even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured & paid separatelly)

M&L for rendering CM (1:3) 10 mm thick on ceiling, soffits etc on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise secifically provided complete all as specified and directed..

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L cutting holes in brick wall built in cement mortar or dismantling existing PCC bed block exc. Half brick thick for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B1 complete all as specified and as directed

Taking down chowkhat or frame n exc. 1.5 sqm each but with shutters without taking off shutter from the frame complete all as specified and directed.

All as per item No 15 here in before exceeding 1.5 Sqm but not exc 4.00 Sqm complete all as specified and directed.

Re-securing or easing and adjusting wooden shutter of any description without taking down and exc 1 Sqm but n.exc 2.00 Sqm complete all as specified and directed.

S&F window/Ventilator section of frame 72 x 55 mm fixed to wall or concrete surface with MS hold fast (30 x 5 mm section) 150 mm long made of galvaniszed steel powder coated and section of shutter 47 x 20 mm, mulion section 72 x 50 mm (base steel as per IS 513 'D' quality galvanzed as per IS 277 with zinc of 120 gms/Sqm) glazed or gauzed and wire gauze shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.60 mm including poweder coated grill/guard bars made of square bars 10 mm dia at 150 mm c/c horizontal spacing fixed in MS flat frame (30 x 5 mm) fixed to windows frame with screws, including 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40 mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed. Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised pane! design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face complete all as specified and directed.

S&F for 35 mm thick 2nd Class, hardwood Glazed and skeleton shutters,(minimum 8 panels) open rebated and with prepared to receive wire cloth (gauze)r etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred-beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F 35mm factory made plain framed, panelled shutter (without interlocking rail and with one panel only) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for size 105x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F for size 125 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

M&L for cement concrete type C1, 1:3:6 (20 mm graded aggregate) in door and windows frames, any size, single or double rebated, including ar- rangement for fixing of hinges and fixtures as required complete all as specified and directed.

S&F in repairs 10 Itr capacity PVC flushing cistern coloured with accessories Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete and specified and directed by engr-in -charge.

S&F 150mm long Aluminium anodised, barrel tower bolts of ex- truded section and fixed complete all as specified

S&F 150mm long aluminium handle cast type polished bright.

S&F 100 mm long butt hinges medium weight, cold rolled mild steel, and fixed complete all as specified.

M&L for providing type B0 1:2:4 cement concrete (using 12.5mm graded aggregate) as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil bound distemper including applying chalk whiting, on plastered surfaces, preparotory to distempering complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of old plastered surface and applying two coats of distemper oil emulsion over a one coat of primer on walls complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of newly plastered or unplastered surface and applying two coats cement base paint complete all as specified and as directed by Engineer-in-Charge.

M&L complete removal of of old treated wall surfaces of any description and applying two coat of cement base paint, complete all as specifeid and directed.

M&L preparation of newly plastered or unplastered surface and applying three coats of white wash on surface of ceiling complete all as specifeid and directed.

M&L preparation of old plastered surface and applying two coats of white wash on ceiling complete all as specifeid and directed.

M&L Glazed ceramic coloured tiles in vertical surface 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl Screed bed 10 mm thick in cm 1:4 complete all as specified.

M&L for non-skid ceramic coloured tiles tiles 7 to 8mm thick(square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) Specified and directed by engr-in-Charge.

M & L 15 mm thick screed bed or bedding layer of cement mortar (1:4), for laying of marble stone Complete all as specified and as directed

M&L Green marble 20(+-2mm )minimum Size 30cm x 20 cm machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing complete all as specified and directed.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan- necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F in PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc .

All as per item No 45 here in before 75mm complete all as specified and directed.

S&F in repair PVC SWR floor trap with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F in repair PVC SWR bend including jointing with solvent cement 110 mm dia complete all as specified and directed.

S&F in repair PVC SWR bend including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F in repair PVC SWR Junction piece 75 mm double (Double T) provided with access door equal or unequal complete all as specified and directed.

S&F in repair 110 mm PVC SWR Junction single (Single T) provided with access door complete all as specified and directed.

S&F in repair PVC SWR vent cowl of size 110 mm complete all as specified and directed.

S&F in repair PVC SWR vent cowl of size 75 mm complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as specified and as directed.

All as Item No 54 here in before but 20 mm dia complete all as specified and as directed

S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

All as per item No 56 here in before but 20mm bore complete all as specified and directed.

S&F in repair gun metal globe valve or gate valve with mild steel iron wheel head, screwed both ends for iron pipe & fixed for 20 mm bore

Dismantling water tanks exc 250 but not exc 500 Itrs capasity complete all as specified and directed.

S&F in repair vitreous china squatting pan “orrisa" pattern of size 580mmx440mm “white" with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer- in-charge. Make : Hindware/Parryware

S/F in repairs 15 mm Stop valves,fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as per specified and directed by Engr-in-Charge.

S & F in repairs 15mm CP bib tap fancy type copper alloy with crutch or butterfly handle , screwed down, screwed for iron pipe etc complete all as specified and directed.

M&L in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M & L for complete removal of existing roof treatment including bedding layer in cement mortar and disposed from MOD Land complete all as specified and as directed.

M&L for cement concrete tiles 20 cm x 20 cm x 20 mm thick with grey cement and no pigment machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished complete all as specified and directed by Engineer-in-Charge.

M&L 15 mm thick screed bed or bedding layer of cement mortar 1:4 with liquid water proofing compound complete all as specified and directed by Engineer-in-Charge. Note : Liquid WPC shall be measured and paid separately.

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 Itr/Sqm over concrete / plastered roof surface. (b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be minimum 10 years.

M&L PCC 1:2:4 type B1 using 20mm graded aggregate mixed with water proofing compound as per manufacturer instructions laid 40 mm avg thickness as in padding over roof slabs for providing proper slope to the concrete padding, surface finished even and smooth without using extra cement.

M&L Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/ zinc chromate,complete all as specified.

M&L Preparation of new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer,complete all as specified.

M&L preparation of old surfaces of wood of any description not otherwise described width or girth and applying one coats of synthetic enamel paint complete all as specified.

M&L for machine cut polished kota stone slab flooring 20mm (+ 2mm) thick in tread of steps and similar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in cement mortar 1:4, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed.

M&L for polished kota stone slab 20 mm (+ 2mm) thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:4, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed.

S&F stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof for 75 mm dia pvc pipe as per specified and directed by engr-in-charge.

M & L for non skid ceramic tiles area of each tiles exceeding 0.06sqm but not exceeding 0.18 Sqm and 7mm thick but as in skirting set & jointed in neat cement slurry & pointed in coloured cement to match over 10mm thick backing coat of cement plaster in CM (1:4) complete all as specified and as directed.

S&F in repairs pillar taps cast copper alloy chromium plated, with capstan heads screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15 mm bore pipe complete all as specified.

S&F in repairs chromium plated shower rose 125 mm size with or without swivel joints complete all as specified.

S&F in repairs CP tubular Towel rail , 20 mm dia, D Type 600mm long between flanges brass chromium plated with screws and cleats, (Minimum weight 190 gms) complete all as specified

S&F in repairs soap dish, vitreous china white approximate size 160x160x90mm fixed to plugs with chromium plated brass screws etc complete all as specified

S&F of glass shelf corner consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete

S&F 15mm dia PVC Connection 450 mm long with nuts complete all as specified.

S&F in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two'coats of synthetic enamel paints including PVC waste-pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts,-and 32mm dia brass waste fitting complete all as specified.

S&F for 32mm flush pipe to closet including all joints and making good to the floor of size 500mm long in repair complete all as specified.

S & F in repair 25 mm dia anodised aluminium alloy with powder coated curtain rod including all necessary fixing arrangement like clamps, end brackets, end to end bracket and eight nos rings per meter complete all as directed and specified.

S&F soap container of PTMT fixed with and encluding chromium plate brass screws and wooden/plastic cleats (minimum weight 105 gms.)

S&F pre painted galvalume aluminium zinc coating Gl based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specification complete all as directed and specified.

S&F in repair 19mm thick prelaminated particle board,exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work for cupboard shelfs & shutter all as specified and as directed by Engineer- in -charge.

S&F Extra over rates of block board or veneered particle board for external 18/19mm teak wood lipping, 6mm thick fixed with nails all as specified and as directed by Engineer- in -charge.

S&F 100mm Hasp and staple, safety type, with mild steel hinges pin including bolt to hinge plate and fixed with screws.

S&F in repair for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Demolition reinforced cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-Charge.

Dismantling loose concrete cover of RCC columns, beams, slabs chajjas and the like as directed, roughening-and cleanining concrete surface with steel wire brushes, washed with water and allowed to dry, incl derusting of steel reinforcement, providing -fabric mild steel wire mesh 75 mm x 75 mm x 2 mm dia as reinforcement to concrete. After placing the additional reinforcement all concrete surfaces shall thoroughly scrubbed with brushes, washed with water and alloy to dry . To this surfaces apply chemical polycrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness ) gunniting mix (using 1 part of ordinary Portland cement 53 Grade and 2 parts of ghaggar sand mixed with adhessive / admixture at the rate as directed) with a pressure of 2 to 2.5 Kg per Sq cm by gunniting machine and surfaces finished even and fair, incl necessary padding, shuttering / form work . 5 mm thick cement plaster in CM (1:4 ) complete all as specified and directed by Engineer-in-charge.

S& F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified.

All as per Item No. 94 here in before but 6mm dia bars in stirrups, spacers and binders.

S&F in repairs stainless plate rack of size 900mm x 750mm x 250mm depth size made out of 0.75mm thick sheet.

S&F for 110 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as per specified and directed by engr-in-charge.

M & L for 75 mm thick PCC 1:3:6 type C2 as in Plinth Protection using 40 mm stone aggregate including making joints & filling with sand bitumen mastic.

M&L for 100mm thik cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes complete all as specified and directed by Engr-in -Charge.

M&L for Chequered cement concrete coloured tiles (300 X300) 20-25mm thick confirming to IS - 1237 (rubber moulded) in floor setc, set, jointed & pointed with cement slurry 15mm thick bedding layer of cement sand mortar (1:6) complete all as specified by Engr-in-Charge.

M&L for writing letters, figures, arrows,dashes (Block Roman, Italic or Indian) nexc 30 cm high complete aii as specified and directed by Engr-in Charge.

M&L for writing stops, commas,short lines, dashes hyphens, brcakets, etc fluorescent paints complete all as specified and directed by Engr-in Charge.

S & F for framed work such as grills, .gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard-bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corr- forming to Fe.290.Gde-E-165

S&F Rotational moulded polyethylene 500 Ltr water storage tanks white colour only as per IS (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by Engr-in-Charge.

Removing building materials/rubbish (other than spoil payable under disposal of earth) to a distance of 15 KM beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engineer-in-Charge.

M & L for three coat of to achieve smooth surface wall care putty on internal old and new plaster surfaces of wall to achieve smooth surface as directed

M&L prepration of old surfaces and applying two coat of exterior emulsion paint over a coat of primer any tint (colour as approved by GE) including preparation of surface of wall, band/chajja/balcony up to four storey height building complete all as specified and dircted by Engineer in charge.

S&F factory made 18mm (+0.7mm) thick celuka PVC ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet shutter and also manufactures test report and test certificate is mandatory with each and every supply of the material complete as per directions of Engineer-in- Charge,manufacturers specifications and drawing.

S&F factory made 18mm (+0.7mm) thick celuka PVC ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company One side prelam and other side plain 18mm thick Celuka PVC ply for Shelf/ Partition/ Drawer and also manufactures test report and test certificate is mandatory with each and every supply of the material complete as per directions of Engineer-in- Charge,manufacturers specifications and drawing.

S&F factory made 5mm thick PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company plain 5mm thick PVC sheet paneling for back side (wall side) and also manufactures test report and test certificate is mandatory with each and every supply of the material complete as per directions of Engineer-in- Charge anufacturers specifications and drawing.

S&F 100mm size Stainless steel handel complete all as specified and as directed by Engr-in-charge.

M&L for 50mm rmagnetic catches and fixed complete all as specified and as directed by Engr-in-charge.

S&F 38mm size stainless steel piano hinges complete all as specified and as directed by Engr-in-charge.

S&F for 125mm size of hasp & staple safety type stainless steel with mild steel hinge pin incl bolt to hinges plate and fixed with screws complete all as specified and as directed by Engr-in-charge.

Taking down carefully copper/aluminium point wiring light /fan, socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for One light / ceiling fan/exhaust fan/call bell point controlled by one switch with two runs of single core FRLS PVC insulated unsheathed IS-694 marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm including conduit fittings and acessories concealed in wall / ceiling or surface conduit wiring on ceiling /wall including provn of pressed steel terminal box of 2 mm thick and covered with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS copper conductor of size 1.5 sqmm connected to earth dolly complete all as specified and directed by Engr-in-Charge.

All as per ser item No 118 above but for socket outlet 5 Amp controlled by one switch on the same board with other switches complete all as specified and directed by Engr-in-Charge.

All as per ser item No 118 above but for 3 pin 5 Amps socket out let independent board on different wall controled by one switch complete all as specified and directed by Engr-in-Charge.

All as per ser item No 118 above but for one light point controlled two nos two way switches all as specified and directred by Engr-in-Charge

All as per ser item No 118 above but with cable size 2.5 Sq mm for one 3/5 pin 15 Amps socket outlet on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm all as specified and directed by Engr-in-Charge.

Supply and fix switch piano 5 amps flush type single pole one way suitable for 240 volt AC complete all as specified and directed by Engr-in-Charge.

Supply and fix socket outlet flush type 5 pin 6 amps suitable for 240 volt AC complete all as specified and directed by Engr-in-Charge.

Supply and fix socket outlet 2 in 1, 5 pin , 5 and 16 amps flush type suitable for 240 volt AC complete all as specified and directed by Engr-in-Charge..

Supply and fix switch piano 16 amps flush type single pole one way suitable for 240 volt AC complete all as specified and directed by Engr-in-Charge..

Supply and fixing of ceiling roses, surface bakelite 65x50mm 3 terminals', PVC/Polycarbonate, isolated body complete all as specified and directed by Engineer-ln- Charge.

Supply and fixing electronic fan regulator, step type, AC, 240 volts, 50 Hz , 5 steps, rotary knob white colour suitable for ceiling fans of 1200 sweep complete all as specified and directed by Engineer-ln- charge. Make: Havells /Cona/SSK.

Supply and fix switch piano 5 amps flush type single pole two way suitable for 240 volt AC. Make:Anchor Penta PC/Legrand/Cona

Supply and fix bell push flush type 5 Amps, suitable for 240 volt AC complete

Supply and fix bell AC 230 volt ding dong type complete all as specified and directed by Engineer-ln- charge..

Supply and fixing wall mounted LED batten extruded aluminium housing provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting (Lumiline plus 20W), 220 Volts, complete, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and directed by the Engineer- In- Charge.Cat No: LUMILINEPLUSBS 20W LED 865SPCSS. of Havells Make or equvilent.

Supply and fixing ultra slim surface decorative 10 watt, 6000 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-ln- Charge.Cat No: LUMILINEPLUSBS 10 WLED 865SPCSS. of Havells Make or equvilent

S&F of lamp holder insulated body with back plate for batten fitting complete all as specified and directed by Engineer-in-Charge.

S&F LED bulb, 09 watt complete all as specified and directed. Make:Bajaj/philips/CG.

Supply and fixing wall mounted LED bulk head fittings, 10 watt,IP-65 warm white,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-ln- Charge. Make: Havells /Philips/CG/Halonix (for infront of pource)

Taking down including disconecting the electric connections of ceiling fan and dismantling blades greasing and painting the whole assembly including marking MES No complete all as specified and directed .

Hanging/fixing only celing fan received from item No. 137 above and connecting up including fastner and provision of suitable size of copper cable from connector of fans to ceiling rose complete all as specified and directed .

Taking down including disconecting the electric connections of exhaust fan and dismantling blades greasing and painting the whole assembly including marking MES No complete all as specified and directed .

Hanging/fixing only exhaust fan received from item No. 139 above and connecting up including fastner and provision of suitable size of copper cable from connector of fans to ceiling rose complete

S&F of PVC exhaust fan heavy duty, 200 mm sweep 230 volt 1300/1400 RPM with louvers and all accessories such as mild steel fastners and connecting up with twin core twisted flexible copper conductor cable from ceiling rose to exhaust fan including making round openings and make good disturbed surfaces to match the existing surfaces complete all as specified and as directed by engineer-in-charge. (Toilet)

S&F BEE star rated ceiling fan heavy duty, 5 star 1200 mm sweep, 230 volt and all accessories .connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fan including make good disturbed surfaces to match the existing surfaces complete all as specified and as directed by Engineer-in-charge. (one for each Qtr)

M& L for submain wiring with two runs of 6.0 sq mm cable and one run of 6.0 sq mm single core copper conductor, PVC insulated but unsheathed FRLS cable of specified size of multi stranded copper conductor, 1100 volts grade IS:694 marked drawn through in and including non metallic PVC conduit medium grade, ISI marked ( not less than 20 mm dia) complete with all fittings and accessories laid/fixed concealed in wall or surface conduit wiring on wall ceilings and also include specified runs of specified earth continuity conductor of similar type cable 6.0 Sqmm all as specified and directed by Engineer- in- Charge.

Taking down unserviceable sub main wiring of aluminium of 2 Runs of 6 Sqmm cable including batten/conduit complete etc and making good the disturbed surfaces complete all as specifiedand as directed.

Supply and fix in replacement of MCCB vertical distribution board, 4 way TPN,IP 43 protection, factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 415 volts, neutral link, earth bar and Din rail single door, neutral bar and pan assembly with connecting link and suitable to accomodate MCCB as incomer MCCB and MCB SP as outgoings complete all as specified. Make: L&T/ legrand/ Schneider. ( Note: MCBs will be measured and paid separately under respective items)

S & F in replacement of fixed tharmal magnatic setting 3 pole MCCB 100 amps.50 Hz,415 Volts with repturing capacity 16 KA complete all as specified and directed by the Engineer-ln- Charge.

S & F in replacement of MCB DB SPN 8 way factory made in sheet steel power coated with 200 Amps rated bas bar 240 volts netural link earth bar and din rail double door complete all as specified and directed by the Engineer-ln- Charge.

M &L for earthing complete wrth galvanized steel earth pjate electrode 60 x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than, 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead Gl wire 4mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore Gl light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-l , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm .

M&L in replacement of earth contuinity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanized iron or steel wire complete all as specified and directed by Engineer -in - Charge.

Taking out and Refixing carefully electric meter box with all connections and keeping in safe custody for refixing complete all as specified .

Taking down unserviceable SP/SPN MCBs of any capacities from the MCCB DBs / MCB DBs after disconnecting the electric supply, complete all as specified and directed by the Engineer- In- charge.

S&F MCB, Single Pole, 6 Amp to 32 Amp, 240 volts, 10 KA breaking capacity , C Curve complete all as specified and directed by Engineer-in-charge.

S&F MCB, Single Pole, 40 Amp, 240 volts, 10 KA breaking capacity 'C' Curve complete all as specified and directed by Engineer-in-Charge.

S&F MCB SPN 40 Amps, 10 KA, 240V, 50Hz, 'C' Series complete all as specified and as directed by Engineer-in-charge.

Hindustan Co.Co

M/S MG GROUP

Atish Builders LLP

Gaurav Construction Company

Leo Network power systems