REPAIR MAINT OF AREA DRAINAGE, FENCING, COMPOUND WALL , CULVERT, PATH AND OTHER MISC BR WKS UNDER AGE BR II AT GE JHANSI

Amount

Dismantling posts or struts (wood or RCC) any section including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc, removing serviceable bricks to store and rubbish off the premises, complete all as specified and directed.

Dismantling of fencing wire mesh, any type, complete all as specified and directed.

Dismantling of structural work incl door, gates of any type etc, complete all as specified and directed.

Dismantling of asbestos cement (corrugated / semi corrugated etc) sheet as in roof covering, complete all specified and directed.

Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof / ceiling, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry and pointed in CM, complete all as specified and directed.

Taking down oldunserviceable ceiling boars with frame, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Demolition of cement concrete incl terrazzo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, complete all as specified and directed.

Demolition of RCC not exc 15cm thickness roof, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work, complete all as specified and directed.

Excavation in post hole (similar hole) in any type of soil, each post hole not exceeding 0.5 Cum, getting out, returning filling in and ramming, complete all as specifide and directed.

M&L for mild steel angle and flat Iron for posts and struts and straining bars in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing fencing etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165, complete all as specifide and directed.

M&L for coloured PVC covered galvanised chain link fencing, of size 50 x 50mm and dia of wire 2.5 mm and 1.5 mm PVC covered (overall dia of wire 4mm), fixed to any type of standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

M&L for galvanised iron, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75.0 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

M&L for mild steel deformed TMT bars 6 mm To 8mm dia (straight or cambered) bearing bars or similar items such as bars for tightening of chain link fencing, complete all as specified and directed.

M&L for MS screwe bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc 5.0cm but not exc 10.0 cm long and dia of neck 10.0 - 15.0mm, complete all as specified and directed.

M&L for cement concrete, in foundations, filling and mass concrete, Type D2 1:4:8 (40 mm graded aggregate), complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F of 1.25 mm thick, mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc, as required, complete all as specified and directed.

S&F of mild steel framed work as in door, gates or similar items of angle or other section as required with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering; doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with and incl necessary machine works i.e. cutting, welding, bending, grinding etc confirming to Fe-410-W, (Gde E-250) Quality ‘B’, complete all as specified and directed.

M&L for mild steel work as roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beams, tee, angle, channels or flat sections) including distance pieces, cleats etc with and incl all kind of machine works i.e. cutting, welding, bending, grinding etc, confirming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed.

S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering / cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

Fixing only old AC sheet fixed with L-type or J-type screws or cranked hook bolts all as specified and directed.

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

S&F of exposed frame false ceiling system with GI powder coated grid consisting of main T runner 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof / Slab incl wall/perimeter runner/channel of 15 mm size with interlocking arrangement, as required, for framing grid of suitable module size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed. Make : Gyproc / V-Board / Everest

M&L 50 mm thick cement concrete type C2, 1:3:6 (using 40 mm graded stone agg) in sub base of flooring/ hard standing, complete all as specified and directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, including in CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate.

M&L for factory made PU coated, chequered cement concrete tiles of any colour 30cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as directed.

M&L 16-18mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with old size bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6, but except bricks, complete all as specified and directed.

M&L for half brick thick wall with fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed.

M&L for precast cement concrete louvres and jallies, made of PCC, 1:2:4, type B0 (12.5 mm graded aggregate), 40 mm thick (measured solid), including all mouldings and frame set in CM 1:4, complete all as specified and directed.

Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as directed. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika

M&L for 15 mm thick rendering in CM (1:4) with water proofing compound, on fair/other than fair faces of brick work finished even and fair, complete all as specified and directed. (Note : WPC shall be measured and paid separately)

M&L for 15 mm thick rendering in CM (1:6) on fair / other than fair faces of brick work finished even and fair, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white wash on new plastered wall surface, complete all as specified and as directed.

M&L for complete removal of existing treatment from old treated surfaces of wall and applying two coat of cement based paint over and incl one coat of exterior grade cement based prime on external surface of wall, complete all as directed and specified.

M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated external surfaces of wall of and applying three coat of white wash (lime), complete all as specified and directed.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of white wash (lime) on walls surface, complete all as specified and directed.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of cement based paint on walls surface, complete all as specified and directed.

M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L 25 mm thick plain cement concrete type B0 1:2:4 (using 12.5 mm graded stone agg) as in levelling course, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

M&L for machine cut Kota stone slab flooring 18-20 mm thick and laid over and incl 15mm thick screed bed in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with and including Cutting / Griding / mirror Polishing on Kota stone as per local trade practice, complete all as specified and directed.

All as per item no 46 here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering in CM 1:4.

Excavating in trenches, not exc 1.5 m wide for foundation exc 10 sqm on plan and not exc 1.5 m in depth and getting out in hard / dense soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, wateringand well ramming in layers not exc 25 cm in hard / dense soil, complete all as specified and as directed.

Removing excavated soil not exc. 50m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and as directed.

M&L 75 mm thick cement concrete type C1 1:3:6 (using 40 mm graded stone agg) as in hard standing laid in panels, not more than 1.5 mtr in length/width, laid to slope 1:30 incl forming joints using 3mm thick and 35mm wide glass dividing strips, complete all as specified and as directed. Note : The glass dividing strips will be measured and paid separately under respective item only.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in copings, bond stones, bed plates for hold fast, benching, surface channel, suacer drain and the like incl weathering, slightly rounded or chamfered angles and throating etc, complete all as specified and directed.

Supply only Glass dividing strips 3mm thick and 38mm wide fixed in floor complete all as directed

Extra for forming fair finished drains & channels 30cm inner girth in cement concrete using extra cement including forms moulds etc, complete all as specified and directed. (Inner girth only measured).

All as per item no 54 here-in-above but add or deduct for each 25 mm girth or part thereof over or under 30cm

M&L for RCC, type B2 1:1.5:3 (20 mm stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, chajja, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for mild steel deformed TMT bars 5 mm To 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

Form work to sides and soffits of suspended slabs such as roof slabs, floor slabs and lintels/beam, chajja landing and similar work not exc 200mm thick, complete all as specified and directed.

M&L for factory made RCC drain cover, 50 mm thick, made of M25 or higher Grade with 8 mm dia tor steel bar at 100 mm c/c, steel rims to prevent damage to the edges, 02 nos mild steel hooks, without hole, concrete by vibro compression process, medium duty, confirming to IS-12592, duly fixed on cable duct / drain including demolishing of old damaged cover, complete as directed.

HARNAM SINGH ANIL SINGH

M/s Jagdish Chandra Arora

FTH Traders

M/S Kesav Dev Agarwal

A K ENTERPRISES

M/S AADI TRADERS