CWE/P-65/2019-20 SPECIAL REPAIR TO BLDG NO NP-44 OR MD ACCN UNDER GE (SOUTH) PATHANKOT

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in plinth protection finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size. 350x450x6 to 7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick rendering in cement mortar 1:4 set, and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L ceramic Non skid coloured tiles 7 to 8mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar 1:4 all as spd complete all as specified and directed.

M&L ceramic Non skid coloured tiles 7 to 8mm thick (Square / rectangular) area of each tile exceeding 0.18 Sqm but n.exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar 1:4 all as spd complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc set in any type of mortar complete all as specified and directed.

M&L 20mm thick granite (of any type) work (table rubbed and polished) in cooking platforms and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L machine cut kota stone, stone slab flooring 20-25mm thick over and including cement screed bed 20mm thick in cement mortar 1:4 set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and granite polishing as decided by Engr-in-Charge complete all as specified and directed.

M&L for machine cut kota stone 20-25mm thick over and including cement rendering 10mm thick in CM 1:4 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in skirting complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off the shutter from the frame) including hold fast not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off the shutter from the frame) exceeding 1.50 Sqm and not exc 4.0 Sqm each including hold fast complete all as specified and directed.

S&F pressed steel frames size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc including filling of cement concrete 1:3:6 type C-1 in back of chowkats complete, as specified.

S&F pressed steel frames size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc including filling of cement concrete 1:3:6 type C-1 in back of chowkats complete all as specified and directed.

M&L Plain framed factory made 35mm thick shutter of 2nd class hard wood rail & style (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12 mm veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated all as specified.

M&L factory made Glazed and skelton shutters 30mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24(a) kiln seasoned and pressure treated all as specified.

M&L Solid PVC Door Frame (single frame) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skinwith suitable metal stiffner and fixed with 100 x 8 mm sheet metal CSK screw complete alll as specified. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

M&L fixing 30 mm thick factory made solid panel prelaminated/plain PVC internal door shutter consisting of frame made out of MS Tubes of 19 gauge thickness and size of 40mm x 20mm for stiles as well as as top, lock & bottom rail. MS frame shall have a coat of metal primer of approved make and manufacture. MS frame shall be covered with heat moulded prelam/plain C channel made from 5mm thick PVC sheet of density 600 Kg/Cum manufactured by an ISO-9001-2008 certified compony of size 30mm thickness, 110mm with width foaming stiles in which 100 mm should be flat & 5mm should be taper and 5mm thick, 135mm wide PVC sheet for top rail and bottom railin which 125 mm should be flat 7.5mm taper on either side of pannel also for lock rail 145 mm sheet, 125mm should be flat & 5mm thick tapper on either side. An additinal 5mm thick PVC strip of 20mm width is to be struck on interior side of the C channel unsing PVC solvent cement adhesive. Panneling of 10mm thick prelam PVC sheet to be fitted in the MS frame welded/sealed to stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side and additional 30mm wide PVC beading as gap insert for top & bottom rail. Door to be fixed with frame with 3 Nos. MS powder coated butt hinges of size 100 mm x 25mm x 2mm and 50mm long steel screws drilled suitable to passv through both the wall of the MS tube. Other hardware of door should be fixed with 25mm x 8mm size steel screw etc. complete as per manufactures spfn & direction of Engineer-in-Charge .

S&F small fittings such as bracket of any type door stop and the like articles n. exc 200 Cucm each of 2nd class hard wood complete all as specified and directed.

S&F aluminium sliding door bolt 300mm long plate type anodised door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified.

S&F 150mm size aluminium handle fabricated type complete all as specified and directed.

S&F 150mm long aluminum tower bolts (ISI marked) of extruded section all as specified.

S&F 150mm mild steel helical door spring (ISI marked) complete all as specified and directed.

S&F steel window/ventilator with tubular frame factory made of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer all as specified & as shown on drg No CEPZ/ID-245/01 and 246/02 sheet ½ & 2/2 complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm of nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or glvanised wire staples complete all as specified and directed.

M&L for preparing the new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified.

Demolition of concrete of any description and in any position not otherwisespecifically provided for complete all as specified and directed.

M&L Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand over and including 10mm thick rendering in cement mortar 1:4 mixed with liquid water proofing admixture of approved brand complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded aggr) as in fdn filling and mass concrete complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern size 580mm x 440mm white with integral foot rest including provision of cement concrete bedding, connection to drain out pipe and to flush pipe, anti syphonage pipe etc complete including making complete all as specified and directed.

M & L Supply and fix in repair 10 ltrs capacity PVC symphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets, fush pipe of polyethylene of low or high density or PVC. 32 mm dia. complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 630x450mm including waste coupling 32mm dia and 32mm dia waste pipe, brackets etc. complete all as specified and directed by Engr-in-Charge.

S&F steel Sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.

S&F Plate rack made of stainless steel 1.00 mm thick of size 900 mm x 950mm fixed to wall with and including nuts & bolts of suitable size for fixing in wall complete all as specified and directed.

M&L PVC connection 15mm size with PTMT nuts on both ends of length 450mm , complete all as specified.

Taking up or down GI pipe 15mm bore and connection, including cleaning for refixing or removing unserviceable pipe from the site complete all as specified and directed.

Taking up or down GI pipe 20mm bore and connection, including cleaning for refixing or removing unserviceable pipe from the site complete all as specified and directed.

M&L cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3. Cutting not exceeding 10cm girth complete all as specified and directed.

S&F 15mm bore GI tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete all as specified and directed.

S&F 20mm bore GI tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete all as specified and directed.

S&F in repairs angle valve fancy type cast copper alloy chromium plated with capstan head high pressure screwed both ends for iron pipe or for union bore of pipe 15mm dia (ISI Marked) complete all as specified and directed.

S&F in repairs stop valve concealed fancy type, long shank and cup (ISI marked) brass chromium plated with capstan head screwed both ends for iron pipe or for union bore pipe of 15mm dia complete all as specified and directed.

S&F 20mm bore stop valve cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron of pipe or for unoins complete all as specified and directed.

S & F in repair brass bib taps cast copper alloy fancy type chromium plated with long shank with capstan head high pressure screwed down screwed for iron pipes of bore 15mm complete all as specified and directed.

S&F in repair Pillar taps,fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.

S&F brass chromium plated shower rose 75mm size with or without swivel joints incl fixing to steel pipe or union fixed complete all as specified and directed.

S&F chromium plated steel Soap Dish ISI marked fixed with and incl chromium plated screws of as approved complete all as specified and directed by Engr-in-Charge.

S&F Tubular towel rail 20mm dia ‘D’ type 60cm long between flanges brass chromium plated complete all as specified and directed.

Disconecting water tank exceeding 500 Ltrs and n.exc 1000 Ltrs and removing to store complete all as specified and directed.

Supply and fxing rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and brass ball valve 20mm, high pressure with polyethelyne float and fly nuts complete all as specified and directed.

Dismantling/taking down of cast iron or reinforced concrete or PVC soil waste and drain pipes 75mm or 100mm dia with all fittings complete all as spd & directed.

S&F 100mm bore sand cast, cast iron soil waste and vent pipes ISI marked in any length with or without ears with cement joints fixed to walls complete all as specified and directed.

S&F 100mm bore sand cast, cast iron soil waste and vent pipes ISI marked in any length with or without ears with lead joints laid in floors or in trenches complete all as specified and directed.

S&F 100mm bore cast iron bends any radius diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F Cast iron branch pieces, single ( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 100mm bore complete all as specified and directed.

Supply and fxing in repairs, 100 mm dia cast iron 'P' or 'S' trap ISI marked complete all as specified.

S&F 75mm bore sand cast, cast iron soil waste and vent pipes ISI marked in any length with or without ears with cement joints fixed to walls complete all as specified and directed.

S&F 75mm bore sand cast, cast iron soil waste and vent pipes ISI marked in any length with or without ears with lead joints laid in floors or in trenchescomplete all as specified and directed.

S&F 75mm bore cast iron bends any radius diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F Cast iron branch pieces,single ( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 75mm bore complete all as specified and directed.

S&F Cast iron floor trap, dia of outlet 75mm with CI grating including jointing to waste pipe fixed in PCC M-15 (nominal mix) complete all as specified and directed.

Extra only over pipe fittings, if fitted with oval access doors, for pipe of 100mm bore complete all as specified and directed.

Extra only over pipe fittings, if fitted with oval access doors, for pipe of 75mm bore complete all as specified and directed.

S&F 50mm bore sand cast, cast iron soil waste and vent pipes ISI marked in any length with or without ears with cement joints fixed to walls complete all as specified and directed.

M&L Cast iron cowl suitable for pipes of 50mm bore complete all as specified and directed.

M&L Stack clamp out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing of stays to wall or roof for 50mm bore pipe complete all as specified and directed..

M&L Stack clamp out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing of stays to wall or roof for 100mm bore pipe complete all as specified and directed.

M&L Stack clamp out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing of stays to wall or roof for 75mm bore pipe complete all as specified and directed.

S&F 100mm bore PVC (SWR) rainwater drainage pipes single socketed, in any length with rubber ring joints as in repair , fixed to walls complete all as specified and directed.

S&F 100mm bore PVC (SWR) bend any radius fitting for PVC (SWR) pipes as in repair complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces in any description etc including raking out joints haking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas,ceiling and roof projection making the line in true shape finished even & smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick on concrete in CM 1:4 in ceiling and making the line in true shape finished even & smooth without using extra cement complete all as specified and directed.

M&L for two coats of oil bound distemper to newly plastered surfaces including preparation of surfaces by application of 3mm thick wall care putty & primer complete all as specified and directed by Engr-in-charge.

M&L two coats exterior emulsion paint on newly plastered surface of wall including preparation of surface by 1-2mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.

M&L for preparing the new plaster surface and applying three coats of white wash on ceiling complete all as specified and directed.

M&L preparation of old surfaces of ceiling by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing,rubbing down and cleaning oil greasy spots etc and applying two coat of white wash to ceiling surface complete all as specified and directed.

M&L two coats exterior emulsion paint on old surface of wall including preparation of surface by complete removal of existing treatment and applying 1-2mm thick wall care putty complete all as specified and directed.

M&L complete removal of existing treatment of wall and providing wall putty 1-2 mm thick incl preparation of surface and applying two coats of two coats of oil bound distemper complete all as spd and directed by Engr-in-Charge.

S&F in repair curtain rod,mild steel chromium plated 25mm dia pre-painted synthetic enamel paint of wooden finishes fixed with screws complete all as specified and directed.

S&F in repair wooden bracket (turned, weathered and mitred) brackets of Ist class hard wood pre-polished with French polish and touch wood with cut, hole suitable for 25mm dia rod fixed with screws and gutties in wall complete all as specified and directed.

Supply and fxing in repair wooden (turned, weathered & mitred) end caps with ornament and fixed to curtain rod with screw of design/shape complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

M&L rendering 10mm thick in cement mortar 1:4 on flat roof surface mixed with liquid water proofing admixture as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note :- WPC shall be measured and paid separetly.

M&L for water proofing treatment by applying water proofing membrane APP (Atactic Polyprobhlene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.5 kg/sqm and thickness not less than 3 mm, laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a coat of hot industrial bitumen 85/25 applied @ 1.20 Kg/Sqm on prepared surfaces complete all as specified and directed.

Supply only liquid water proofing admixture of approved brand complete all as specified and directed.

M & L 40mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

All as per srl item No 91.00 above but except tiles complete all as specified and directed.

S&F hasp and staple 75 mm size saftety type, aluminum anodized with pin incl bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 18/19mm thick prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position complete all as specified and directed.

M & L RCC nominal mix 1:2:4, type, B-1 (using 12.5mm graded crushed stone aggregate), as in slab supported on walls, landings and in shelves, complete all as specified.

M & L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required incl crancking, bending spirally for hooping columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia. complete all as specified and directed.

M&L for form work to sides and soffits of shelves for rough finished surfaces of concrete complete all as specified and directed by Eng-in-Charge.

Taking down carefully copper/aluminium point wiring (light/Fan socket or power) with complete fittings such as switch, sockets Ceiling rose pendent holders regulators etc. Removing old/UNSV material from site and making good the old disturbed surface complete all as specified and directed.

M & L Point wiring for light/fan point/bell point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet for switches and sockets, including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) (b) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips e all as specified and directed.

All as per above item no 102.00 here in before but for one 3 pin socket outlet 5 amp on same board all as specified and directed.

All as per above item no 102.00 here in before but for one 5 pin socket outlet 5 amp on independent board all as specified and directed.

All as per above item no 102.00 here in before but for one light point controlled by two 2-way switches.

M&L Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet for one 3 pin socket outlet 15 Amp on independent board including 2.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) complete all as specified and directed.

M&L for switch Piano flush type single pole one way 5 Amp complete all as specified and directed.

M&L for switch,socket combination 2 in 1 , 3 pin, 5 and 15 Amp flush type all as specified and directed.

M&L for switch Piano flush type single pole two way 5 Amp complete all as specified and directed.

M&L for switch,socket combination 3 pin, 5 Amp flush type complete all as specified and directed.

M&L for socket outlet 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

M&L for bell push flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed.

M& L celling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S&F Bell Multi Music Type, AC 230 volt, Single Pole complete all as specified and directed.

M&L Ceiling rose, bakelite 65x50mm two or three therminals isolated body fixed on PVC round block complete all as specified.

S&F in replacement sheet metal enclosure factory made (Double door) type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-09 complete, single pole and neutral, 240 volts, 50 Hz, 8 way with 200Amps rated copper bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified.

S & F in replacement existing unsv distribution board iron clad, with double door 4 way with IP-54,1K-09 protection, suitable for MCCB as incommer AC 415 Volts three phase, 50 c/s with thermal release adjustable type (80% to 100 % ) and MCB as outgoing ,complete with appropriate size copper bus bar and neutral link complete with including one MCCB 3 pole 415 Volts 100 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measured separately).

M&L 6 to 32 Amps MCB SP ( ISI Marked) 50 C/S 10 KA 'C' sereis complete all as specified and directed.

S&F MCB 6 to 32 Amp SPN 50 C/S 10 KA 'C' sereis complete all as specified all as directed

Supply and Fix in replacement existing UNSV decorative box type fitting 4 feet long with blue coloured end caps for LED tube 1x16W LED including LED tube 4 feet long of 16W having bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm, 3 core complete all as specified all as directed.

Supply and Fix in replacement existing UNSV tube light fitting with LED 20W inverter batten type fitting 4 feet long aluminium extruded housing, charging time 10-12 hours and back up time 04 hours, IP-20 ,rated voltage 230 V, 50 hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed. Notes: (i) LM79 report from third party (instead of company in house lab) NABL/UL accredited lab (ii) LM 80 report from LED manufacturer (iii) Test certificates to be submitted before commencement of work/ claiming for payment . (iv) Warranty certificate for minimum 2 years to be submitted from OEM.

Supply and fixing for replacement of old unsv bldg light LED Bldg light fittings on Bldg of height not exceeding 7.5 mtrs, comprising of epoxy powder coated housing, enclosed with glass cover in frame, for efficiency not less than 95 lumens/Watt, and minimum wattage capacity of 25 Watt complete all as specified and directed.

Supply and fixing in replacement existing unsv integrated LED bulk head light fitting 1X10 watts suitable complete, connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required complete all as specified all as directed

Supply and Fix in replacement existing unsv sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast, bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required complete all as specified all as directed

S&F Lamp holder polycarbonate type with back plate having matching colour to holder for angle/batten fittings (ISI marked) complete all as specified and directed.

Supply and fix wall mounted bracket light with designer frosted glass globe including LED Lamp inverter type 7 watt 230 volts, 50 Hz, lumen 700 lm, rated current 35 mA, CRI less than 80, Charging time 8 to 10 Hours, operating temperature -10 to 50 degree celcius,back time 04 Hours, complete all as specified and directed.

Supply and fixing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A, 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.

Supply & Fix 1200mm sweep ceiling fan, energy saving 5 star rated, with remote control and BLDC motor complete with canopy, blades, down rod, split pin etc. complete of appx wattage 30 to 32 watt rated suitable for operation on AC 220-240 Volts AC, 50Hz, PF>0.95, air delivery Appx 230 Cum/ Min with 5 speed control including connecting to ceiling rose all as required or directed.

Supply & Fix Exhaust fan AC sinlge phase 230/240 volts of size 300 mm sweep steel body with louvre including connecting to ceiling rose all as required or directed including connecting to ceiling rose all as required or directed.including dismentling old unsv and depositing to MES storeyard complete all as specified all as directed

M&L Supply & Ventilation fan AC sinlge phase 230/240 volts of size 200 mm sweep having plastic body with louvre including connecting to ceiling rose all as required or directed including connecting to ceiling rose all as required or directed.including dismentling old unsv and depositing to MES storeyard complete all as specified and directed.

Supply and laying in replacement of existing unserviceable/ burnt submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 4 sqmm drawing into and including concealed PVC rigid non metallic conduit of 20mm dia , 1.8 mm wall thickness and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 4 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: (i) Two runs of 4 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 4 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of 20mm dia , 1.8 mm wall thickness wiil be measured as a one unit. (ii) Proper colour coding is to be followed as per IS Specification. (iii) wiring shall be concealed/ on surface with rigid PVC conduit medium grade as per site requirement.

Supply and laying in replacement of existing unserviceable/ burnt submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawing into and including concealed PVC rigid non metallic conduit of 20mm dia , 1.8 mm wall thickness and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: (i) Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of 20mm dia , 1.8 mm wall thickness wiil be measured as a one unit. (ii) Proper colour coding is to be followed as per IS Specification. (iii) wiring shall be concealed/ on surface with rigid PVC conduit medium grade as per site requirement.

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level )with top edge of the plate not less than 1.5 Mtr below normal ground level connecting with galvanized iron GI earth wire 4mm dia by means of bolt nut check nuts and washers of galvanized iron and provision of GI tubing medium grade (ISI marked)of size 15mm for protection of GI earth wire upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, , earth work all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing) complete all as specified and directed.

M&L Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed.

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,Foundation filling of poles or stays complete all as specified and directed.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

S&F Geyser 25 Ltrs capacity, 230 volts, vertical type , BEE with 5 stars rating suitable for 8 bar pressure with nano polymer coated tank, incoloy heating element, rust proof ABS body etc. incl necessay drilling, provn of anchor bolts of suitable size and making electrical connections complete all as directed by Engr-in-charge. Make: Model "monza-ec" of Havells or equivalent models of Bajaj/ Racold/ Usha Lexus/ Voltas

M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of MES Schedule part-I (2009) Note : Sand shall be fined sand as specifed and punned thickness shall be measured and paid complete all as specified and directed.

M&L Sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

M&L Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor, along the wall or along the pole complete all as specified and directed .

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

GANDOTRA CONSTRUCTION CO

malghotra construction co

Abrol construction co

M/S RUDHRAKSH TRADING CO

AGGARWAL ASSOCIATES