LED Flood Light TT Nagar IIIrd Call

Amount

SPORTS LED DMX FIXTURE :--

Supply of LED sports ight luminaire with a U-mounting bracket and housing made of Die-cast Aluminimum with polycarbonate lens having CRI > 90, SDCM<5 and CCT of 5700K and shall be compliant with IP66 and IK08 classification. Luminaire shall be designed to emit at least 162000 nominal lumens with maximum system wattage of 1620W at a system efficacy of at least 100 lumen/watt. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 35 deg C. The luminaire should have choice of Narrow beam, symmetrical medium and symmetrical wide beam suiting various applications with exposed PC optic lens. The luminaire should have fins on the back to ensure good heat dissipation through ventilation fan IP 66 protection minimum 6-8 forthermo cooling and to prevent dirt from settling on the luminaire along with aiming angle scale. The luminaire should be marine salt protected, vibrations proof and wind force protected. The luminaire enables interfacing with an external light console to mix SportsStar LED with other DALI/ DMX fixtures. The electronic driver should be fully integrated and shall have a power factor >0.95 and THD <10% with a minimum inbuilt surge protection of 10kV inbuilt in the driver and suitable for an operating temperature range of -40 to 50 deg C. The luminaire should comply with all the required IEC and IS standards. LM79 and LM80 reports must be submitted from a NABL accredited laboratory. Luminaire and driver must have BIS certificate and the same must be submitted for record. for fixture and driver(Thedriver and fixture are of same company).Philips BVP680 LED1620/957 1620W & driver EVP400 with equivalent make in similar specifications.

DMX CONTROLSYSTEM-DMX controller and control cable as OEM design standard, detail to be given in tender bid. Kindly consider DMX interface controller with panel for programming. Pl considers One advance Laptop for programming and one small UPS for DMX controller only. Location control room. Master controller in BMS room or broadcaster room. Bidder has to consider BMS interface to provide lighting control from BMS also. Main console should operate independently with AV for major event and all other event should control from BMS. Bidder to consider control cable inside the control room only . All DMX driver inside the control room.Pl refer control wiring block diagram. Please refer scene setting.

41.1 Supply of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 1 core /2 core /3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor

41.1.10.3 16 Sq.mm 4 CORE ARMOURED16 Sq.mm 4 CORE ARMOURED

41.15 Laying of one number armoured / unarmoured power cable 1:1 kV grade of size not exceeding 25 Sq.mm in the existing RCC Hume/Stone ware/G.I. pipe / surface in existing trench as required.

41.21Laying of one number armoured / unarmoured power cable 1:1 KV grade of size not exceeding 25 sq. mm in the existing RCC hume/stone ware/G.I. pipe/surface in existing trench as required

46.38Control cable Supply and laying testing & commissioning of following sizes of Copper conductor control cables on existing tray including fixing clamps & proper connections to equipment etc. complete as required. 46.38.3 4C x 1.5 sqmm

41.56.2 Supply and erection of hot dip G.I. cable tray perforation not more than 17.5% for specific dimensions along with tees, bends. The cable tray shall be hang from ceiling/ fixed to wall with necessary angle/flat iron/hanging rod, for ceiling suspensions, clamp, anchor fastener, nuts, bolts, washers, not more than 1.0 mtr. apart complete as per specification to complete the job.150 x 50 x 1.6mm thick

Earthling with G.I. Earth plate 600mm X 600mm X 6mm thick including accessories and providing masonry enclose in cement mortor, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 Metre long etc. (but without charcoal or coke and salt) complete as required.

Earthing with Copper Earth plate 600mm X 600mm X 3mm thick including accessories and providing masonary encloser in cement mortor, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 Metre long etc. (but without charcoal or coke and salt) complete as required. For 'B' class pipe ISI marked

Add Extra for using salt and charcoal / coke for G.I. Plate or Copper plate earth electrode as required including excavation & refilling.

Supply and laying 4.0mm (8 SWG) dia. G.I. wire at 0.5 metre below ground level as conductor earth electrode including jointing etc. as required

Providing and laying earth connections from earth electrode with 4.00 mm dia copper wire in 15mm dia G.I. Pipe from earth electrode as required

Providing and fixing 25mm X 4mm G.I. strip on surface or in recessed/concealed for connection etc. as required.

Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc. as required as per specification

Contractor 2 Pole rating 240/415V- 40A

MCCB current rating – upto 63 Amp, 10kA, 3P 415V AC- INCOMMING

MCB SP 6Amp to 32Amp 10kA rating -OUT GOING

MCCB 25 ka current rating-160 amp adjustable overload setting 80%-100% of in, adjustable short circuit setting 6-10 in 4 pole

JUNTION BOX

Supply, installation, testing and commissioning of G.I. junction box for duct entry 1/3 compartments junction box (frame & trap) including all necessary works.150 x 150 x 65 - 90 mm

MOUNTING STRUCTURE

supply, installation testing and commissioning of hotdip glavanised structure for mounting of Item 1, LED sports star fitting with coplete hardware i.e nut bolts washer, aiiming provision, welding etc complete job in the exsisting roof of stadium , calculating wieght of fixture along with frame (complete job)