Providing Pipe line inlet outlet arrangements to Perungalathur NEW OHT in Tambaram City Municipal Corporation

Amount

Earthwork excavation in all soils except hard rock soil including de-watering wherever necessary and refilling the earth after completion of work etc., complete as per the standard specification and Refilling charges. (For Linear Measurement Basis) WD-W0664

Supply and delivery of DUCTILE IRON SOCKET/SPIGOT PIPES FOR CLASS K9 AS PER IS 83 150mm dia including cost and conveyance and handling charges etc complete WD-M0636

Supply and delivery of DUCTILE IRON CLASS PN10 FLANGED PIPES AS PER IS 8329/2000 150mm dia including cost and conveyance and handling charges etc complete

1.0 M Length WD-M0652

1.50 M Length WD-M0668

2.0 M Length WD-M0684

Supply and delivery of DUCTILE IRON SPECIALS AS PER IS 9523/2000150mm dia including cost and conveyance and handling charges etc complete

D/F Specials WD-M0786

Bolt and Nuts WD-M0589

3 Ply RI Sheet WD-M0591

Supply and delivery of CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING AND WITH 5 YEARS WARRANTY 150mm dia including cost and conveyance and handling charges etc complete WD-M1074

Manufacture, Supply and Delivery of DI D/F Slanted seat Swing Check Valve. Body of ductile cast iron of Grade GGG 40 or equivalent grade and disc of ductile cast iron GGG 40 or equivalent grade with fully encapsulated EPDM rubber, where both faces can be used.Electrostatic epoxy powder/liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270. (EP-P) it is a resi-coat powder approved for drinking water application,applied through fusion bonding process by dipping the shot-blasted casted components heated up to 200 deg C). Face to face dimensions as per EN558-1, series 48 and flange connections as per EN 1092-2/IS 1538 and with 5 years warrantyincluding cost and conveyance and handling charges etc complete 150mm dia DI Nonreturn Valve WD-M1222

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation WD-M1803

Supply and delivery of PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER 4.00 sqmm including cost and conveyance and all labour cahrges etc complete 3.0x4.0sqmm WD-M1975

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter,Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.WD-W0873

Lowering of D.I Pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TCMC Officers including all labour charges etc complete.WD-W0247

Jointing C.I/ D.I-S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants. (including cost of jointing materials ) WD-W0310

Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1(2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc.,complete.WD-W0326

Providing RCC Spiral staircase to 16 m stage Over head tank 2.00 LL Capacity to a total height of 20.05 Mtr including center pillar Step slabs Step Hand Rails including all charges steps lifting and fixing hand rail pillars RCC joly hand rails Landing slab and painting cement paint etc complete Steps 1.0x( 0.45+0.6/2)x0.20 M size

Supply and fixing of RCC jolly Over OHT roof slab including cost and conveyance of all materials and all labour charges etc complete

Painting Two coats using exterior emulsion paint including cost and conveyance of all materials and all labour charges etc complete

Writing Name board with Embalam including cost of base paiting and art and letter writing works etc complete WD-W0745

Supply and fixing of FRC Manholes over OHT roof slab for man holes including cost and conveyance of all materials and all labour cahrges etc complete WD-M1358

Fabrication supply and fixing of Stainless steel lader 0.60 M width and 4.0 M depth 30 Cm inter steps including cost of SS 304 grade Squre tubes fabrication charges polishing and fixing in position etc complete

Supply and filling of Quarry rubbish including cost and conveyance from approveed quarry and all labour charges for filling Consolidation etc complete

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

MKC ENTERPRISES (BID ID -1134965)