RENOVATION WORK OF 12 th FLOOR SOUTH WING OF VIGILENCE UNIT IN , SHAKTI BHAWAN EXTENSION, LUCKNOW

Amount

Laying and Jointing PVC Pipe. Heading

Providing & Fixing of at all height false ceiling including providing and fixing of frame made of special section power pressed from m.s. sheet and galvonised in accordance with zinc coating of grade 350 as per IS 277 and consisting of angle cleat 25x1.6mm with flanges of 22mm and 37mm at 1200mm c/c one flanged fix to the ceiling with dash fastener 12.5mm dia and and 40mm long with 6mm dia bolt to the angle hangers of 25x25x0.55 mm of required lengthened other end of angle hanger being fixed with nut and bolts to GI channel 45x15x0.90mm running at the rate of 1200 mm c/c to with the ceiling section 0.5mm thick button wedges of 80mm with tappered flenges of 26 mm each having clips of 10.5mm.at 450mmc/ c shall be fixed in direction perpendicular to GI channels with connecting clips made out of 2.64mm diax230mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimetre channels 0.50 mm thick 27mm high having flenges of 20mm and 30mm long ,perimeter of ceiling fixed to wall /partition with help of rawl plugs at 450mm c/c with 25 mm long drive all screws @230mm interval including jointing and fixing to a flush finish of tappered end sq edge of board with recommended filler jointing and tapper finisher and two coat of primer suitable for board as per manufacturers specification and also including the cost of making of openning for light fittings grills diffusers cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of engineer incharge but excluding the cost of painting.12.50mm thick tapered edge gypsum board confirming to IS:2095PART.

Providing and Fixing false ceiling at all heights with integral densifier Armstrong false ceiling tiles of size 595x595x12 mm of approved texture, design and pattern having NRC (Noise resistance coefficient of 0.50 minimum as per IS 8225: 1987 Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm ,and 600x1200x15mm suitable for Green Building application, with Recycled content of 66% GW.The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and a load carrying capacity of 10 Kgs/M2.The Tile & Grid system used together should carry a 15 year warranty. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspe on system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspe on system at the end of each main runner should not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 300mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres all complete as per drawing, specification and direction of engineer incharge. With 12 mm thick mineral fibre sound absorbing sheet size

Providing and laying floor of 10 mm thick vitrified tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work.

Providing and laying of 16 mm thick granite ( black/ brown) in flooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge.

Providing ,making & fixing wall panneling as per drawing from seasoned wood of MIRINDI frame of 2"X1.5" size placed horizontally and vertically both way @ 2 ' c/c. the frame work fitted in floor with the help of nails ,screw then frame work to be covered with 12 mm thick plywood from the help of fevicol,nails and screw. then making grooves with 6mm MDF Ply with the help of fevicol,nails and screw. The final surface to be finished with 1mm thick laminate and grooves to polished as per design.. as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.

Providing ,making & fixing full height wooden partitions as per drawing from seasoned wood of MIRINDI frame of 2"X1.5" size placed horizontally and vertically both way @ 2 ' c/c. the frame work fitted in floor with the help of nails ,screw then frame work to be covered with 12 mm thick plywood from both side with the help of fevicol,nails and screw. then making grooves with 6mm MDF Ply with the help of fevicol,nails and screw. The final surface to be finished with 1mm thick laminate on both sides and grooves to r polished as per design.. as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.

Providing ,making & fixing low height wooden partitions as per drawing from seasoned wood of MIRINDI frame of 2"X1.5" size placed horizontally and vertically both way @ 2 ' c/c. the frame work fitted in floor with the help of nails ,screw then frame work to be covered with 12 mm thick plywood from both side with the help of fevicol,nails and screw. then making grooves with 6mm MDF Ply with the help of fevicol,nails and screw. The final surface to be finished with 1mm thick laminate on both sides and grooves to r polished as per design.. as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.

Providing & fixing full height toughned glass partition with 12mm Modi float glass fixed edge to edge as per design and drawing and polished where required along with neccesary hardware all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge

Providing & fixing of Plotter cutting film make crytal as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge

Providing & Fixing of Roller Blinds of approved shade as per drawing & specification as approved by the Architect/ Engineer -in-Charge.

Providing & fixing of 12 mm toughned glass door with all hardware as per design with edge polish m/c top & bottom pivot and bottom lock with handle all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge

Providing & fixing of flush door Laminated both side complete with all fittings,Round mortis lock,door closer etc all complete all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge

Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Providing & applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.

Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) .

Same as above in item no. but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint.

Providing proper arrangement of binding file and shifting files and furniture from one place to another place with required labor, T&P for proper completion of work.

Providing proper arrangement of bindig file and document with help of markeen cloth required for completion of work (material rate only).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness:

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Dismantaling doors and windows chowkhats including stacking of materials as directed by Engg-in-Charge within a distance of 60 meters.

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres.

Dismantling cement concrete or brick or granolithic floors, tiles floor including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

First class brick (class-150) work in 1:4 cement and coarse sand (F.M.1.8 to 2.5)mortar in SUPERSTructure wall of one brick thikness including supply of all materials, labour & T&P etc. required for proper completion of work

TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)

12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

Providing fabrication of wooden cabinet of dept 0.42Mtr. to be fitted 13 Th floor of Shakti Bhawan Extn building having 5 adjacent cup-board of 0.45X 1.3 Mtr.t wo cupboard divided by one middle vertical member..wooden cabinet fabricated with 19mm thick National or Swastik /green Block board or equivalent pasted with 1mm thick sunmica laminate of approved quality texture and shade on all outer exposed surface.The cup-board shall have lockable magnet door fabricated with 19mm block board fixed to cup-board with magnet and having in handle and one . fornt side coverd with flap door fabricated with 19 mm block boradThe visible exposed surface shall be glued with 1mm thick sun mica of approved quality shade and texture. The inner surface shall be glued with0.8 mm thick pointed sun mica of approved quality shade and texture. The cut edges and ends shall be finished with spirit polish teak wood beading of section. . The work includes cost of all labour, material, T&P etc. required for proper completion of work.

Providing & fixing of Excutive office computer work station cum work table in 12 th floor south wing vigilence unit of Shakti Bhawan Extn. Building. The Unit shall be of size 0.9X0.60 mtr worktop & 0.76 mtr hight. The Entire Above Unit Shall be Fabricatrd with 19 mm Block Board Superior Quality Swastik Made all Extirior surface with approved Quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading.t.One no drawer nd one flap door fabricated with the help of 19 mm block board Swastik Block board /green or equivalen The cup-board shall have lockable magnet door fabricated with 19mm block board fixed to cup-board with magnet and having in handle The main table rack shall be approved matel handle and necessery m.p lock. all drawrs shall be provided with approved qaulity slider machnism. The foot board shall be also provided in above three peaces. Excutive work station .The work includes cost of all labour, material T&P required for proper completion of work.

MCA CONSTRUCTIONS PVT. LTD.

Interiors Today