DAY TO DAY MAINT OF B/R NATURE, DAY TO DAY MAINT RELATED TO ELECTRICAL COMPLAINTS IN TECH AREA AND REPAIR / MAINT OF VALVE CHAMBER, CONTROL VALVES INCLUDING REPLACEMENT OF SIGN BOARDS AND MAINTENANCE OF WATER SUPPLY INSTALLATIONS AND OTHER CONNECTE

Amount

S&F 15mm bore galvanised steel water tubing and connection medium grade with all fitting fixed to wall or in ceiling including taking down old unserviceable GI water tubing and connection and removing from site of work, complete all as specified and directed..

S&F 20mm bore galvanised steel water tubing and connection medium grade with all fitting fixed to wall or in ceiling including taking down old unserviceable GI water tubing and connection and removing from site of work, complete all as specified and directed..

M&L for cutting chases, pinning in making good to facing where required and pointing in CM (1:3) to ends to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills , sunshades,shelves, lintesl etc and cutting chases for cncealed water tubing or conceales conduit wiring etc and making goor cutting not exc 10cm girth in brick walls, complete all as specified and directed.

S&F in repair harrison rails of anodised aluminium alloy, chromium plated, with fixing brackets, stops, rollers, etc, complete all as specified and directed. .

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank, complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure with polythene float & fly nut screwed for iron pipe or brass ferrule, complete all as specified and directed.

S & F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S &F in repair PVC cover/lid for PVC over head water tank suitable for capacity of 500 ltrs and upto 1000 ltrs, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity exc 250 ltr & n. exc 500 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on dd/mm/yy" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity exc 500 ltr & n. exc 1000 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on dd/mm/yy" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

S&F in repair vitreous china wash hand basin white, flat back, size 550 x 400mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand, complete all as specified.

S&F in repair CP pillar tap, 15mm bore, fancy type, cast copper alloy, capstan head, chromium plated, screwed down high pressure with or without lettered “hot’ or “cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repair 15mm bore, fancy type, chromium plated, stop valves, with long shank and cup (concealed type) angular, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repairs of 15mm bore bib taps, cast copper alloy with chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule, compelete all as specified and directed.

S&F in repair 32mm bore waste coupling, brass, chromium plated for wash hand basin with long screwed shanks and fly nuts, complete all as specified and directed.

S&F 32mm bore waste fittings, brass, chromium plated for sinks, basins, etc. with long screwed anks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S&F 40mm bore waste fittings brass, chromium plated for glazed ware sinks, basins, etc. with long screwed anks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S&F 100mm grating doom of PTMT (minimum wight 25 gm), complete all as specified and as directed.

S&F in repair 15mm bore angular stop cock, chromium plated, cast copper alloy, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S & F in repair 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends, complete all as specified and directed.

S&F in repair vitreous china EWC (padestal pattern) white 'P' or 'S' trap and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and as directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) incl P or S trap, complete all as specified and directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let, ball valve, float and handle, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as directed and specified.

S&F in repair for plastic water closet seat, white, closed pattern with flat bottom and cover including mild steel chromium plated or aluminized hinging device, complete all as specified and directed.

S&F in repairs for 15mm dia pipe, health faucet (ABS Body) mild steel chromium plated suitable with 1.25 metre long flexible tube and ABS wall hook including makeing connection and fixed in position, complete all as specified and directed.

S&F brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S & F in repair 15mm bore central hole basin mixer, cromium plated, complete all as specified and directed. (Make : Jaguar Cat No. FRL 5167 NB or equivalent model of make in Marc/Cera)

S&F in repair 150mm grating doom of PTMT (minimum wight - 100 gm), complete all as specified and as directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed (minimum weight - 90 gms), complete all as specified and directed.

S&F in repair 20mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed (minimum weight -125 gms), complete all as specified and directed.

S & F in repairs, 15mm bore, stop valves standard of PTMT any colour high pressure screwed for iron pipes and fixed (minimum weight - 90 Grams), complete all as specified and directed.

S & F in repairs, 15mm bore, angle stop valves of PTMT any colour high pressure screwed for iron pipes and fixed (minimum weight - 90 Grams), complete all as specified and directed.

S & F in repairs, 15mm bore pillar taps, of PTMT any colour high pressure screwed iron for iron pipes and fixed (minimum weight - 110 gms), complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (minimum weight -210 gms), complete all as specified and directed.

S&F in repair towel rail, 600mm long PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed

S&F in repair shower rose 125mm size, brass, chromium plated, including fixing to steel pipe or union, complete all as specified and directed.

Opening of air block/blockage of GI pipe outlet of water tank to all internal fitting to enable to smoth flow of water from bib tap/shower/WHB/pillar taps/stop cock complete by air pressure/water gravity pressure etc, complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140mm, fixed on floor, complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (die cast) body designation No 1, universal type, suitable for door shutters 851 to 1000mm in width between 61 to 81 Kg, complete all as specified and directed.

S&F in reapair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed.h

Resecuring or easing and adjusting without taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exc. 2 Sqm each, complete all as specified and directed.

Taking down shutter, resecuring or easing and adjusting and refixing in same opening, of any description not exceeding 1 Sqm each, complete all as specified and directed.

Taking down shutter, resecuring or easing and adjusting and refixing in same opening, of any description exceeding 1 Sqm each & n.exc 2 Sqm each, complete all as specified and directed.

Taking down shutter, resecuring or easing and adjusting and refixing in same opening, of any description exc 2 Sqm each, complete all as specified and directed.

S&F 100mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 150mm long mild steel, barrel tower bolt, stove enamelled black with bright bolt, complete all as specified and directed.

S&F 150mm long mild steel, pressed handles, oval type, stove enamelled black, complete all as specified and directed.

S&F 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F butt hinges of size 75mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed.

S&F 150mm long aluminium handle, cast type, anodised, complete all as specified and directed.

S&F 250mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair stainless mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding ( but not backing) and remvoing rubbish off the premishes, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering back coat in CM (1:4), complete all as specified and directed.

Hacking out old broken glass any thickness size quality or description from metel frame/aluminium frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed.

M&L for 3mm thick, sheet glass ordinary, quality and glazing with oil putty in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed.

M&L for 4mm thick, figured glass, pin headed type and glazing with oil putty in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed.

Taking down cement plaster on brick or concrete wall surface including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L 15mm thick rendering in CM (1:4) other than fair faces of brick work or concrete surfaces finished surfaces fair and even smooth without using extra cement, complete all as specified and directed.

M&L 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces finished surfaces fair and even smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1.5 to 2mm thick wall care putty to obtain smooth finish, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.

Repair to old damage rusted hinges of steel window inclunding supply of new hinge( any type), neccesary scafolding/ supports and touch-up painting to repaired portion, complete all as specified and directed.

Note for item No. 1.00 to 71.00:- (i) Supervisor will collect the Job cards of complaints from the complaint cell on every official working day and feed back should be given to the complaint cell after completion on same day or within 48 hours. (ii) Each complaint must be completed within 48 hrs from the date of job cards.The complaints which will not be rectified within specified time of 48 hrs, recovery of Rs. 400/- shall be made for each complaint from the amount due to the contractor.

Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing capping (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surface to match with existing, complete all as specified and directed.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLSH) size 1.5 sqmm drawn in and including PVC casing and caping with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet / modular plate incl continous earth wire of PVC insulated unsheathed, FRLSH multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 74.00 here-in before but one 3 pin 5 Amps socket outlet on same board controlled by other switch, complete all as specified and directed.

All as per item No 74.00 here-in before but one 3 pin 5 Amps socket outlet on the independent board controlled by other swtich, complete all as specified and directed.

All as per item No 74.00 here-in before but one 3 pin 5 Amps socket outlet independent but below the switch board of light points in the same vertical plate, complete all as specified and directed.

All as per item No 74.00 here-in before but one bell / buzzer point controlled by one push button on the same board with other switches or independent, complete all as specified and directed.

All as per ser item No. 74.00 here in above but for one 16 Amp 3/5 pin switch socket outlet independent point including PVC cable 4 Sqmm FRLSH type copper stranded conductor along with 4 Sqmm continious PVC insulated unsheathed standard copper conductor cable FRLSH type for as earth wire, complete all as specified and directed.

S&F rigid non-metallic PVC conduit of size 20mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed.

S&F rigid non-metallic PVC conduit of size 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed.

S&F PVC junction box (1 to 4 way) of size 20mm dia, complete all as specified and directed.

S&F PVC junction box (1 to 4 way) of size 25mm dia, complete all as specified and directed.

M & L for PVC casing/caping oval type of size 16mm complete with saddle clip, bend, elbow, tee etc as per site requirement, complete all as specified and directed.

M & L for PVC casing/caping oval type of size 20mm complete with saddle clip, bend, elbow, tee, etc, as per site requirement, complete all as specified and directed.

M & L for PVC casing/caping oval type of size 25mm complete with saddle clip, bend, elbow, tee etc as per site requirement, complete all as specified and directed.

S&F in replacement cable, PVC insulated, unsheathed with flexible multistranded copper conductor (FRLSH) of size 1.5 Sqmm, complete all as specified and directed.

S&F in replacement cable, PVC insulated, unsheathed with flexible multistranded copper conductor (FRLSH) of size 2.5 Sqmm, complete all as specified and directed.

S&F in replacement cable PVC insulated unsheathed with flexible multistranded copper conductor (FRLSH) of size 4 Sqmm, complete all as specified and directed.

S&F in repair switch piano flush button single pole, one way 6 amps 240 volts, complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin 6 and 16 Amp, flush type, complete all as specified and directed.

S&F in repair switch piano flush button single pole one way 16 Amps 240 volts, complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin 6 Amp flush type, complete all as specified and directed.

S&F in repair switch and socket combination 2 in 1, 6A flush type, complete all as specified and directed.

S&F in repair switch and socket combination 5 in 1, 6A/16A flush type, complete all as specified and directed.

S&F in repair bell push, flush type 5 Amp, complete all as specified and directed.

S&F in repair stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan, complete all as specified and directed.

S&F in repair lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F in repair modular switches, 1 way, 10 Amp, 1 module, complete all as specified and directed.

S&F in repair modular switches, 1 way, 16 Amp, 1 module, complete all as specified and directed.

S&F in repair modular switch, 2 way, 10 Amp, 1 module, complete all as specified and directed.

S&F in repair modular bell push 6A, 1 module, complete all as specified and directed.

S&F in repair modular socket 6A, 2/3 pin combined 2 module, complete all as specified and directed.

S&F in repair modular socket 6A/16A, 2/3 pin combined 2 module, complete all as specified and directed.

S&F in repair modular fan regulator 120 W, 2 module, complete all as specified and directed.

S&F in repair modular USB charger with 2 USB ports (2M) with cover plate & inner frame, supply voltage 160-240V~ 50-60Hz, Output - 5V DC, 2A, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 2 module, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 3 module, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 4 module, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 8 module, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 12 module, complete all as specified and directed.

S&F in repair metal flush box 1/2 module, complete all as specified and directed.

S&F in repair metal flush box 3 module, complete all as specified and directed.

S&F in repair metal flush box 4 module, complete all as specified and directed.

S&F in repair metal flush box 8 module, complete all as specified and directed.

S&F in repair metal flush box 12 module, complete all as specified and directed.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 100mm x 100 and 50mm deep, complete all as specified and directed.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 175mm x 100 and 50mm deep, complete all as specified and directed.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 200mm x 150 and 50mm deep, complete all as specified and directed.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 250mm x 200 and 50mm deep, complete all as specified and directed.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 350mm x 300 and 50mm deep, complete all as specified and directed.

S&F in repair ceiling rose, 3 phase/PVC/polycarbonate, isolated body, complete all as specified and directed.

S&F in repair modular type 25 Amp power unit 4 module complete with 4 module plate, starter, plug & socket, complete all as specified and directed.

S&F in repair 5 in 1 switch & socket combination 15 Amp with PVC junction box, complete all as specified and directed.

S&F in repair3 in 1 switch & socket combination 5 Amp with PVC junction box, complete all as specified and directed.

S&F in repair PVC space bar saddle, size 20mm dia with washer and screw, complete all as specified and directed.

S&F in repair PVC space bar saddle size 25mm dia with washer and screw, complete all as specified and directed.

S&F in repair MS fan hook with two Nos heavy duty pin anchor fastener, complete all as specified and directed.

S&F in repair buzzer ding dong 230 volts single pole, complete all as specified and directed.

S&F in repair bell electric heahy duty Ding Dong type 230 volts single pole, complete and all as specified.

S&F in repair LED driver for 36W/40/42 Watt (2' x 2') light fittings, complete all as specified and directed.

S&F in repair driver for 9W/12W/18W for LED panel light, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M & L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) for making good to disturbed surface of road, hard standing and any other situation as per site requirements, complete all as specified and directed.

S&F GI flange for 80mm bore pipe, heavy duty with suitable size nuts and bolts and double washers including 6mm thick rubber gasket including taking out old unserviceable one, complete all as specified and directed.

S&F 150mm bore sluice valve flanged end of class PN (1.6) with brass spindle and hand wheel including necessary gasket, nuts and bolts, washer etc. including taking out old unserviceable sluice valve, complete all as specified and directed.

S&F 100mm bore sluice valve flanged end of class PN (1.6) with brass spindle and hand wheel including necessary gasket, nuts and bolts, washer etc. including taking out old unserviceable sluice valve, complete all as specified and directed.

S&F 80mm bore sluice valve flanged end of class PN (1.6) with brass spindle and hand wheel including necessary gasket, nuts and bolts, washer etc. including taking out old unserviceable sluice valve, complete all as specified and directed.

S&F 200mm bore sluice valve flanged end of class PN (1.6) with brass spindle and hand wheel including necessary gasket, nuts and bolts, washer etc. including taking out old unserviceable sluice valve, complete all as specified and directed.

S&F in repair 250mm bore CI foot valve conforming to IS 4038, complete all as specified and directed.

S&F gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC/GI pipe of outer dia 65mm and including taking down old unsrviceble valves, complete all as specified and directed.

S&F gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC/GI pipe of outer dia 50mm and including taking down old unsrviceble valves, complete all as specified and directed.

S&F gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC/GI pipe of outer dia 40mm and including taking down old unsrviceble valves, complete all as specified and directed.

S&F gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC/GI pipe of outer dia 32mm and including taking down old unsrviceble valves, complete all as specified and directed.

S&F gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC/GI pipe of outer dia 25mm and including taking down old unsrviceble valves, complete all as specified and directed.

S&F gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC/GI pipe of outer dia 20mm and including taking down old unsrviceble valves, complete all as specified and directed.

M & L for 65 mm dia butter fly valve made of S.G. iron disc including all accessories after taking down old unserviceable valve, complete all as specified and directed.

M & L for construction of valves pit chamber of size (1200mm x 1200mm x 1200mm, internal), 15cm thick PCC foundation using PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate), 25cm thick brick wall, using old size burnt clay brick in CM (1:4), 10mm thick rendering on internal and extranal surfaces both in CM (1:4), PCC (1:2:4) type B1 coping (using 20mm graded crushed stone aggregate) for grouting MS frame including foundation 3mm thick MS top sheet cover with locking arrangement including 50mm pad lock with double key arrangement, MS frame work made out of 40 x 40 x 5mm thick angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer incuding necessary excavation in any type of soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 mtrs including demolition of existing cracked valve chamber, complete all as specified and directed.

All as per item No 148.00 here-in before but size (900mm x 900mm x 900mm, internal), complete all as specified and directed.

M & L for run lead joints in position for cast iron spigot and socket ends for pipes of size 250mm bore, complete all as specified and directed.

M & L for run lead joints in position for cast iron spigot and socket ends for pipes of size 200mm bore, complete all as specified and directed.

M & L for run lead joints in position for cast iron spigot and socket ends for pipes of size 150mm bore, complete all as specified and directed.

M & L for run lead joints in position for cast iron spigot and socket ends for pipes of size 100mm bore, complete all as specified and directed.

M & L for run lead joints in position for cast iron spigot and socket ends for pipes of size 80mm bore, complete all as specified and directed.

Supply, fabricating, installation, testing and commissioning of back-lit signage board including embedding the board firmly with the wall/MS angle frame/as per approved art work and nomenclature as under :- Box with frame :- 25 x 25mm square pipe (18 gauge) frame with cross supports @ spacing not exceeding 1.0m on the box length including 20mm x 20mm MS Square pipe (18 gauge) stiffeners duly painted with two coats of white synthetic enamel paint (1st grde quality) over a coat of zinc oxide iron primer, depth of box should not be less than 165mm. Side, Top, Back and bottom Panels :- Made out of 24 gauge chemically treated GI Sheets duly powder coated with white matt finish coating on both inner and outer surfaces. Top panel made out of 24 gauge chemically treated GI sheet, duly powder coated, drip cap (fixed with pop rivet or machine moulded to shape) of 25mm on front and side to prevent damages due to rain etc. The bottom panel should be provided with access door fixed with stainless steel screws and suitable housing for LED drivers. LED Module :- LED 12V module beam angle >=150 degrees with IP rating >= 64, 0.72 W/70 lumens per module of 3 LEDs with 7000 to 8000 K colour temperature. LED configuration :- 29 LED modules per Sqm (equal division on spacing based on height of box) and one module every 0.20 m on running length of box. LED power supply :- Input 230 V AC, power supply should be CPCC (constant power constant current) of 30W/60W/120 W. Graphics :- Graphics shall be computer plotter cut with translucent cast vinyl matching the colour specification of the installation.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of paint complete for base support frame for water tanks at roof top/ground floor including dismantling old unserviceable cross arm of any MS section, complete all as specified and directed.

M & L 200mm bore DI fitting for bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (flange sockets or socket and spigot) collars, caps and plugs, complete all as specified and directed.

M & L 200mm bore CI Fitting for bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (flange sockets or socket and spigot) collars, caps and plugs, complete all as specified and directed.

Note: An amount of Rs.40,734.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S. NARENDRA KUMAR GARG (BID ID -3071968)

M/S SARDAR MAL NAHATA (BID ID -3071458)

M/S ROY ENTERPRISE (BID ID -3071479)

B L SHARMA (BID ID -3071472)

M/S BISHAL ENTERPRISES (BID ID -3071484)

M/S. KUMAR CONSTRUCTION CO. (BID ID -3071469)