Repair renewal of furniture at GE Bharatpur

Amount

Form with back/ without back (FD- 77 M, FD- 78, FD-1027):-Taking out old unserviceable seat of form with back/without back (FD- 77 M, FD- 78, FD-1027) and S&F new plank on seat of form with back/without back with nut and bolt with washer of size 65X6mm . Plank should be made of 1 st class hard wood well seasoned (sheesham) free from all knots & crack with two coats of french polish, rest all as per shown in drawing and complete all as specified and directed.

Form with back (FD- 78(M)):- Taking out old unserviceable back of form with back (FD- 78(M)) and S&F new plank on back of form with back with nut and bolt with washer of size 65X6mm . plank should be made of 1 st class hard wood well seasoned (Sheesham) free from all knots & crack with two coats of french polish, rest all as per shown in drawing and complete all as specified and directed.

M&L for preparing old painted steel surfaces of form with back/without back (FD- 77 M, FD- 78, FD-1027) with one coat of synthetic enamel paint on external surfaces complete all as specified and directed.

Charpoy GI pipe 32mm with MDF Top (FD-220) :- Taking out old unserviceable MDF top from each charpoy GI pipe 32mm with MDF top (FD-220) and S&F new plywood BWR 6.5' x 3' x 12 mm thick ISI marked on top with flate head nut & bolt size 10 mm x 75 mm long with washer, rest all as per shown in drg & complete all as specified and directed.

Taking out old UNSV long rail of charpoy GI 32mm dia (FD-220 & FD-270) plywood top and S&F new long rail. Long rail should be made of 32 mm dia medium grade ISI marked GI pipe, make : Tata/Jindal/Sail of charpoy GI. Rest all as per drg and complete all as specified and directed.

Taking out existing old broken short rail from GI charpoy 32 mm dia and providing in position short rails made out of old broken long rail obtained from taking down above item No 05 including threading on both ends complete fixing all as specified and shown on drg and complete all as specified and directed.

Taking out existing old broken legs from charpoy and providing in position made out from GI pipe 32 mm dia obtained from item No 06 & S & F IInd class HW block fitted at bottom of leg with screw and two nos MS clamp made out 25 x 3 mm size and welded to legs incl painting of clamps with two coat of synthetic enemel black paint over a coat of red oxide primer complete all as specified and directed.

Taking out old unserviceable three way elbow from long rail/short rail etc of charpoy GI plywood (FD-220). Supply and fixing in position new three way elbow 32 mm dia med grade (ISI marked). Rest all as per drg and complete all as specified and directed.

Taking out old unserviceable check nut from long rail/short rail etc of GIP/IP charpoy plywood top (FD-220 ) and supply and fixing in position new check nut 32mm dia 6 mm thick complete all as per drg andcomplete all as specified and directed.

Supply and fixing of flat Iron size of 40 x 6 mm from each charpoy GI pipe 32 mm with support flate Iron 40 x 6 mm and two nos fixing and welding each charpoy all as per shown in drg & complete all as specified and directed.

Charpoy GI pipe 32mm with nylon niwar (FD-220 & FD- 270) :-Taking out old unserviceable nylon niwar from existing charpoy GI pipe 32mm with nylon niwar (FD-220 & FD- 270) and charpoy GI folding and complete reviving with new nylon niwar 50-55 mm wide, double knitted complete all as specified and directed by Engineer - in charge. ( colour of nylon newar should be light or mixed colour and weight shall not be less than 1.5 Kgs for each charpoy.

Taking out old UNSV (FMN set) for Charpoy GI 32mm and S&F new U type FMN set. FMN Set made of 25 mm round MS tube of size 1 mm thick. Rest all as specified and complete all as specified and directed.

Almirah steel large/ glazed /medium/small (FD-67M, FD-1032, FD-243, FD-1033, FD-1034, 104M, FD/E6/MAP/18) :-Taking out existing old MS handle of almirah steel large/medium/small (FD-67M, FD-1032, FD-243, FD-1033, FD-1034,104 M, FD-E6/MAP/18). S&F new MS handles chromium plated (ISI marked, make :- Godrej/Rina/Link) suitable for almirah steel large/ medium/small. MS handle chromium plated will fixed with shutter of almirah steel large/Glazed/ medium, rest all as per Drg and complete all as specified and directed.

Taking out existing old lock of almirah steel large/Glazed/medium/small (FD-67M, FD-1032, FD-243, FD-1033, FD-1034. 104M,FD/E6/MAP/18) and S&F new lock with double key (ISI marked, make :- Godrej /Link) suitable for almirah steel large /Glazed /Almirah Steel Large 1/2H x1/2S/ medium. Lock with double key will fixed with shutter of almirah steel large/Glazed/Almirah 1/2H/1/2S /medium, rest all as per Drg and complete all as specified and directed.

Repairing lock godrej pattern of almirah steel large/medium/small (FD-67M, FD-1032, FD-243, FD-1033, FD-1034, 104M, FD/E6/MAP/18) to make it serviceable condition by making new keys in duplicate. Rest all as specified and complete all as specified and directed.

Taking out existing old lock cap of almirah steel large/Glazed/medium/small (FD-67M, FD-1032, FD-243, FD-1033, FD-1034, 104M, FD/E6/MAP/18) and S&F for new lock cap of almirah steel large/Glazed/medium. Lock cap will be fixed by riveted or screws as applicable, rest all as per Drg and complete all as specified and directed.

Taking out existing old Unsv leg portion of almirah steel large /Glazed (FD-67M, FD-1031, FD-1034,104M,-FD/E6/MAP/18) and S&F new leg portion by welding of leg portion made to shape by 18 gauge plain sheet (1.2 mm) of size 470 x 82 x 100 mm duly painted by two coats of synthetic enamel paint after a coat of red oxide primer. Rest all as per Drg and complete all as specified and directed.

Removing of old Unsv leg portion of Almirah steel medium/Small (FD-1032, FD-243, FD-1034 and S&F new leg portion by welding of leg portion made to shape by 18 gauge plain sheet (1.2 mm) of size 415 x 82 x 100 mm duly painted by two coats of synthetic enamel paint after a coat of red oxide primer. Rest all as complete all as specified and directed.

(FD-67M, FD-1032, FD-243, FD-1033, FD-1034,104M, FD/E6/MAP/18 ) : Fixing only in repair of steel sheet shelves in almirah of any thickness and any size / shape by providing new screws or brackets or stoppers fixed as complete all as specified and directed.

Almirah Large Steel Glazed FD-104M,) : Taking out old UNSV glass of almirah large steel glazed FD-104M and S&F new transparent glass made of 6 mm thick as specified ISI marked best quality of Size 750 mm x 230 mm wiith necessory fitting arrangement rest all as per shown in drawing and complete all as specified and directed.

(FD-67M, FD-1032, FD-243, FD-1033, FD-1034, FD-104M,FD/E6/MAP/18) S&F godrej pattern hinges of MS and shape & size as existing in steel almirah fixing duly welded if required complete all as specified and directed.

M&L for preparing old painted steel surfaces of steel almirah (large) (FD-67M, FD-1031, FD-1033, FD/E6/MAP/18 and painted to all internal and external surfaces complete by spray/Brush with one coat of synthetic enamel paint(OG) complete all as specified and directed.

M&L for preparing old painted steel surfaces of steel almirah Glazed Steel (large) (FD-104M ) and painted to all internal and external surfaces complete by spray/Brush with one coat of synthetic enamel paint(OG) complete all as specified and directed.

'-do- all as item No 23 but steel almirah medium and Small '(FD-1032, FD-1034)

Locker bed side steel FD-1029, FD-257 :- Removing of old leg portion of locker bed side steel FD-1029, FD-257 and S&F new leg portionby welding of leg portion made to shape by 18 gauge plain sheet (1.2 mm thick) duly painted by two coats of synthetic enamel paint after a coat of red oxide primer rest all as per drg and complete all as specified and directed.

Taking out existing old MS handle of locker bed side steel (FD-1029, FD-257) and S&F new MS handles chromium plated suitable for locker bed side steel. MS handle chromium plated will fixed with shutter of locker bed side steel, rest all as per Drg and complete all as specified and directed.

Taking out existing old UNSV haspe and staple of locker bed side steel (FD-1029, FD-257) and S&F new hasps and staple suitable for locker bed side steel,rest all as per Drg and complete all as specified and directed.

M&L for preparing old painted steel surfaces of locker bed side steel (FD-1029, FD-257) and spray /brush painted with one coat of synthetic enamel paint (OG) to all internal and external surfaces complete all as specified and directed.

Chair CB steel with arms FD - 75M :- Removing of old UNSV arms of chair CB Steel with arms FD - 75M and S & F new arms of chair CB steel office FD75(M). Arms should be made of II nd class HW of size 450X50X25 mm with painted with two coats of black synthatic enamal paint over a coat of pink primer after preparation of surface and fixing to chair with 75 mm long full threaded steel screws ,washers and nut bolts as applicable. Rest all as per drg and complete all as specified and directed..

M & L for renewal of back frame of chair CB steel with arms (FD75(M), FD-78M) made up of IInd class HW back frame of size 368X460 mm of section 40X25 mm duly caned with white coloured of 2 to 2.5mm wide half round cane and bordered with 3.5 mm half round cane and painted with two coats of black synthatic enamal paint over a coat of pink primer after preparation of surface and fixing to chair with 75 mm long full threaded steel screws ,washers and nut bolts as applicable including taking down old unserviciable back completed all as spacified and directed.

All as per item ser No 30 but seat frame size 460X440 mm.

M&L for prepairing old painted steel surfaces of chair CB steel with arms (FD75(M), FD-78M) with one coat of synthatic enamal paint on surfaces complete all as spacified and directed.

Taking out of old unserviceable pvc hard rubber ring of chair CB steel with arms (FD75(M), FD-78M) and S & F new pvc hard rubber ring of chair CB steel with arms . PVC hard rubber ring should be best quality , Rest all as per shown in drawing and complete all as specified and directed.

All as per item ser No 33 but chair CB steel without arms (FD75(M).

All as per items ser No 34 but size of seat frame 460X440mm of chair CB steel without arms (FD75(M).

M&L for prepairing old painted steel surfaces of chair CB steel without arms (FD75(M) with one coat of synthatic enamal paint on surfaces complete all as spacified and directed.

Taking out of old unserviceable pvc hard rubber ring of chair CB steel without arms FD75(M), FD-78M) and S & F new pvc hard rubber ring of chair CB steel without arms . PVC hard rubber ring should be best quality , rest all as per shown in drawing and complete all as specified and directed.

FD-34, FD-1003, FD-84, FD-75(M) FD-256, FD-359 ) S&F for frame work any pattern of MS steel furniture by circular shaped pipe 15 mm external dia pipe of 18 SWG thick with required welding work and resetting as per standard Drgs of steel furniture including two coat of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

(FD-1007, FD-1008, FD-1009,FD-165 (M) '-ditto- but 25 mm square/circular shaped pipe hollow section 18 SWG thick complete all as specified and directed.

Chair varandah (FD-256 & FD-359) :- Recaning of chair varandah (FD-256 & FD-359) with plastic cane 5 mm wide (white) including taking out all cane from the chair and one coat painting with synthatic enamal paint in white colour complete all as per shown on drawing and complete all as specified and directed.

Taking out of old unserviceable pvc hard rubber shoe of chair varandah (FD-256 & FD-359) and S & F new pvc hard rubber shoe of chair varamdah . PVC hard rubber shoe should be best quality & not less than 25mm , rest all as per shown in drawing and complete all as specified and directed.

Recaning of chair varandah (FD-256 & FD-359) with nylon niwar 50 mm wide (white) including taking out all UNSV nylon niwar from the chair and one coat painting with synthatic enamal paint in white colour complete all as per shown on drawing and complete all as specified and directed.

Taking out of old unserviceable pvc hard rubber shoe of chair varandah (FD-259 & FD-357) and S & F new pvc hard rubber shoe of chair varandah including . PVC hard rubber shoe should be best quality & not less than 25mm , rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV table top for table 3'x3', table 3'x2' with drawer , table clk office steel, table senior officer steel, table office officer steel, tepoy map, tepoy varandah. Top should be made of 18 mm thickprelaminated particle board on one side decorated type exterier grade and other side bolancing white including half round teak wood beading around the tabletop with fixed to table frame by steel screw complete all as specified and directed.

(FD-1002, FD-1003 FD-1004, FD-84(M) M&L for preparing old painted steel surfaces with one coat of synthetic enamel paint (OG) on surfaces complete all as specified and directed.

( FD-1007, FD-1008, FD-1009) M&L for preparing old painted steel surfaces with one coat of synthetic enamel paint (OG) on surfaces complete all as specified and directed.

FD/E6/MAP/17, FD-255) M&L for preparing old painted steel surfaces of with one coat of synthetic enamel paint (white/OG) on surfaces complete all as specified and directed.

Book self open large steel FD-69(M)):-Removing of old UNSV shelves of book shelf open large steel and S&F new shelves on the same place with proper nut bolt /welding. Shelves should be made of 01 mm thick plain sheet duly painted by two coats of synthatic enamal paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing old painted steel surfaces of book self open large steel FD-69(M) and spray painted with one coat of synthetic enamel paint (OG) to all internal and external surface complete, Rest complete all as specified and directed.

Book self open small steel:- Taking out existing old shelves of book case open small steel , and S&F new in the same place . shelves should be made of 18 gauge plain sheet (1.2 mm) duly painted by two coats of synthetic enamel paint over a coat of red oxide primer, rest all as per drawing and complete all as specified and directed.

M&L for preparing old painted steel surface of book Self open small steel and brush/ spray painted with one coats of syntshetic enamel paint(OG) to all internal and external surfaces complete. Rest complete all as specified and directed.

Book case steel FD-1028:- Taking out old UNSV glass of book case steel FD-1028 and S&F new transparent glass of 6 mm thick as specified ISI marked best quality of size as per drg wiith necessory fitting arrangement Rest all as per shown in drawing and complete all as specified and directed.

M&L for preparing old painted steel surface of book case steel FD-1028 and brush /spray painted with one coats of syntshetic enamel paint(OG) to all internal and external surfaces complete. Rest all as per complete all as specified and directed.

Taking out existing old lock of book case steel FD-1028 and S&F new lock with double key (ISI marked, make :- Godrej/Link) suitable for book case steel. Lock with double key will fixed with shutter of book case steel. rest all as per Drg and complete all as specified and directed.

Bed hard steel FD/E6/MAP/18R :-Taking out old unserviceable ply top from each bed hard steel FD/E6/MAP/18R and S&F new plywood BWR 6.5' x 3 'x12 mm thick ISI marked on top with nacessary fitting arengement. rest all as per shown in drg complete all as specified and directed.

M&L for preparing old painted steel surface of bed hard steel and brush /spray painted with one coats of syntshetic enamel paint (black) to all external surfaces complete. Rest complete all as specified and directed.

Charpoy IP with hard top FD/MAP-II/01, FD/MAP-04;-Taking out old unserviceable ply top from each Charpoy IP with hard top; and S&F new plywood BWR 6.5' x 3 'x12 mm thick ISI marked on top with nacessary fitting arengement. rest all as per shown in drg complete all as specified and directed.

M&L for preparing old painted steel surface of Charpoy IP with hard top and brush /spray painted with one coats of syntshetic enamel paint (black) to all external surfaces complete. Rest complete all as specified and directed.

taking out old UNSV PVC shoe of FD/MAP/-II/01,FD/MAP/04, FD/E6/MAP/18R and S&F new Hard PVC shoe of shall be provide at bottom of legs, PVC Shoe made best quality . Rest all as per shown in drg complete all as specified and directed.

Charpoy Folding IP with hard top(FD-388R) :- Taking out old unserviceable ply top from each charpoy folding IP with hard top and S&F new plywood BWR 6.5' x 3' x12 mm thick ISI marked on top with necessary fitting arengement. rest all as per shown in drg complete all as specified and directed.

M&L for preparing old painted steel surface of charpoy folding IP with hard top and brush /spray painted with one coats of syntshetic enamel paint (silver) to all external surfaces complete. Rest complete all as specified and directed.

Table dinning ORs FD-165(M) :- Taking out old unserviceable top from table dinning ORs and S&F new 19 mm thick black board grade1 quality (Exterior Grade ),commercial type covered with 22 Gauge aluminium anodized sheet with necessary fitting arengement. rest all as per shown in drg & complete all as specified and directed.

M&L for preparing old painted steel surface of table dinning ORs and brush /spray painted with one coats of syntshetic enamel paint (Grey colour) to all external surfaces complete. Rest complete all as specified and directed.

Stool steel 305 X 305mm x 510mm FD-81(M) :- Removing of old UNSV leg of stool steel and S&F new legs on the same place with proper welding. Legs should be made of 01 mm thick plain sheet duly painted by two coats of synthatic enamal paint after a coat of red oxide primer .Rest all as per drg and complete all as specified and directed.

M&L for preparing old painted steel surfaces of stool steel and brush /spray painted with one coat of synthetic enamel paint (OG) to all internal and external surface complete. Rest complete all as specified and directed.

Desk FD-1020 :- Taking out of old unserviceable top planks of desk FD-1020 and S & F new top planks of desk FD-1020. Plunks should be made of 1 st grade hard wood well seasoned (teak wood) free from all knots & creck including all necessary fitting and two coat french polish on all wooden surface of desk FD-1020 . Rest all as per shown in drawing and complete all as specified and directed.

M&L for preparing old painted steel surface of desk FD-1020 and brush /spray painted with one coats of syntshetic enamel paint (OG) to all external surfaces complete. Rest complete all as specified and directed.

Rack Side 3/4 spaces steel :- M&L for preparing old painted steel surfaces of Rack Side 3/4 Spaces steel and brush /spray painted with one coat of synthetic enamel paint (OG) to all internal and external surface complete.Rest complete all as specified and directed.

Receiptical small FD-1045:-Removing of old UNSV bucket of receiptical small steel and S&F new bucket on the same place. Bucket should be made of 1 mm thick plain GI sheet. Rest complete all as specified and directed.

M&L for preparing old painted steel surfaces of Receriptical small steel and brush /spray painted with one coat of synthetic enamel paint (Silver/ Grey) to all internal and external surface complete. Rest complete all as specified and directed.

Receiptical large steel FD-1044:-Removing of old UNSV Bucket of receiptical large steel and S&F new bucket on the same place. Bucket should be made of 1 mm thick plain GI sheet. Rest complete all as specified and directed.

M&L for preparing old painted steel surfaces of Receriptical Large steel and brush /spray painted with one coat of synthetic enamel paint (Silver/ Grey) to all internal and external surface complete. Rest complete all as specified and directed.

Shoe rack steel FD/E6/MAP/02R :- M&L for preparing old painted steel surfaces of shoe rack steel and brush /spray painted with one coat of synthetic enamel paint (black) to all internal and external surface complete. Rest complete all as specified and directed.

Chair writing (FD-280, FD-202) :- Taking out of old unserviceable wooden front legs of chair writing and S & F new legs of chair writing including all wood work surface shall be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (Teak Wood) free from all knots & crack rest all as per shown in drawing and complete all as specified and directed.

All as per items ser No 74 above but rear legs of chair writing.

All as per items ser No 74 above but front rail of chair writing.

All as per items ser No 74 above but rear rail of chair writing.

All as per items ser No 74 above but side rail of chair writing.

All as per items ser No 74 above but stiffener of chair writing.

All as per items ser No 74 above but Arms of chair writing.

Taking out of old unserviceable pvc hard rubber ring from various types legs of wooden chairs,tables, bed plywood etc and S & F new pvc hard rubber ring on the legs of wooden chairs, tables & bed plywood etc . PVC hard rubber ring should be best quality & not less than 25mm , rest all as per shown in drawing and complete all as specified and directed.

Prepration of surface of chair writing with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of chair writing with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Chair easy (FD-229 ) :- Taking out of old unserviceable wooden front legs of chair easy and S & F new front legs of chair easy including all wood work surface shell be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

All as per items ser No 83 but rear legs of chair easy.

All as per items ser No 83 but back frame of chair easy.

All as per items ser No 83 but side frame of chair easy.

All as per items ser No 83 but front frame of chair easy

All as per items ser No 83 but rear rail of chair easy.

All as per items ser No 83 but side rail of chair easy.

All as per items ser No 83 but arms of chair easy.

Prepration of surface of chair Easy with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of chair easy with best work man ship, rest all as per shown in drawing andcomplete all as specified and directed.

Chair dinning (FD-279, FD-228) :- Taking out of old unserviceable wooden front legs of chair Dinning and S & F new legs of chair Dinning including all wood work surface shell be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

All as per items ser No 92 but rear legs of chair dinning.

All as per items ser No 92 but front rail of chair dinning.

All as per items ser No 92 but rear rail of chair dinning..

All as per items ser No 92 but side rail of chair dinning.

All as per items ser No 92 but stiffner of chair dinning.

Prepration of surface of chair dinning with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of chair dinning with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Teapoy wooden (FD-278, FD-382) : Taking out of old unserviceable top of teapoy wooden and S & F new top of teapoy wooden including 3 mm thick teak wood beading around of top. Top should be made of 18/19 mm thick prelaminated particle board bonded with phenol fromaldehyde confirming IS- 3087-1985 one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable legs of teapoy wooden and S & F new legs of teapoy wooden including all wood work surface shell be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st grade hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

All as per items ser No 100 but Top rail of teapoy wooden.

All as per items ser No 100 but lower side rail of teapoy wooden

All as per items ser No 100 but Stiffner of teapoy wooden

Prepration of surface of teapoy wooden with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of teapoy wooden with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Table with drawer (900 x 600 x 760mm) (FD-283) : Taking out of old unserviceable top of table with drawer (900 x 600 x 760) mm and S & F new top of table with drawer (900 x 600 x 760)mm including 4 mm thick teak wood beading around of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable legs of table with drawer (900 x 600 x 760mm) and S & F new legs of table with drawer (900 x 600 x 760mm) including all wood work surface shell be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st grade hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

All as per items ser No 106 but top (long) rail of table with drawer (900 x 600 x 760mm).

All as per items ser No 106 but top (short) rail of table with drawer (900 x 600 x 760mm).

All as per items ser No 106 but lower side rail of table with drawer (900 x 600 x 760mm).

All as per items ser No 106 but stiffner of table with drawer (900 x 600 x 760mm).

Prepration of surface of table with drawer with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table with drawer with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable drawers of table with drawer (900 x 600 x 760mm) and S & F new drawers of table with drawer (900 x 600 x 760mm) including best quality fancy type PVC knob 32 mm dia, rest all as per shown in drawing and complete all as specified and directed.

Table without drawer (900 x 600 x 760mm) (FD-223, FD-284) : Taking out of old unserviceable top of table without drawer (900 x 600 x 760) mm and S & F new top of table without drawer (900 x 600 x 760 mm) Including 4 mm thick teak wood beading around of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable legs of table without drawer (900 x 600 x 760 mm) and S & F new legs of table without drawer (900 x 600 x 760mm) including all wood work surface shell be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

All as per items ser No 114 but top (long) rail of Table without Drawer (900 x 600 x 760mm).

All as per items ser No 114 but top (short) rail of Table without Drawer (900 x 600 x 760mm).

All as per items ser No 114 but lower side rail of Table without Drawer (900 x 600 x 760mm).

All as per items ser No 114 but Stiffner of table with out drawer (900 x 600 x 760mm).

Prepration of surface of table without drawer with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table without drawer with best work man ship,rest all as per shown in drawing and complete all as specified and directed.

Table (900 x 900 x 760mm) (FD-291) : Taking out of old unserviceable top of table (900 x 900 x 760 mm) and S & F new top of table (900 x 900 x 760 mm) encluding 4 mm thick teak wood beading around of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable legs of Table (900 x 900 x 760 mm) and S & F new legs of table (900 x 900 x 760 mm) including all wood work surface shell be one coat of wood primer axcept where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

All as per items ser No 121 but top rail of table (900 x 900 x 760 mm).

Preparation of surface of table (900 x 900 x 760 mm) with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table (900 x 900 x 760 mm) with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Table dinning 6 pers (FD-376, FD-373) : Taking out of old unserviceable top of table dinning 6 pers and S & F new top of table dinning 6 pers including 4 mm thick teak wood beading around of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable legs of table dinning 6 pers and S & F new legs of table dinning 6 pers including all wood work surface shell be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st grade hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

All as per items ser No 125 but long rail of table dinning 6 pers.

All as per items ser No 125 but short rail of table dinning 6 pers.v.

All as per items ser No 125 but bracket of table dinning 6 pers.

Prepration of surface of table dinning 6 pers.with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table dinning 6 pers. with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Chair wooden bottom w/o arms (FD-285, FD-225) : Taking out of old unserviceable wooden front legs of Chair Wooden Bottom w/o arms and S & F new legs of chair wooden bottom w/o arms including all wood work surface shell be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

All as per item ser No 130 but rear legs of chair wooden bottom w/o arms

All as per item ser No 130 but fron rail of chair wooden bottom w/o arms

All as per item ser No 130 but rear rail of chair wooden bottom w/o arms

All as per item ser No 130 but side rail of chair wooden bottom w/o arms

All as per item ser No 130 but stiffner of chair wooden bottom w/o arms

All as per item ser No 130 but but Back of chair wooden bottom w/o arms

Taking out of old unserviceable ply from chair wooden bottom w/o arms and S & F new plywood on the seat of chair wooden bottom w/o arms . Top should be made of 06 mm thick ISI marked commercial plywood BWR quality , rest all as per shown in drawing and complete all as specified and directed.

Prepration of surface of chair wooden bottom w/o arms with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of chair wooden bottom w/o arms with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Bed Ply wood top (FD-246/247):- Taking out of old unserviceable ply wood top from bed ply wood top and S & F new ply wood top 12mm thick, ISI marked commarcial BWR quality on bed ply wood top . Ply top wood should be made of 12 mm thick ISI marked commarcial BWR with phenol fromaldehyde, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable head rest of bed ply wood top and S & F new head rest with short rail of plywood top. Head rest made of commercial ply wood 4 mm thick (both side i.e. Inside & outside) with teak wood beading 35mm wide and 6mm thick around of the head rest, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable foot rest of bed ply wood top and S & F new foot rest with short rail of plywood top. foot rest made of commarcial ply wood 4 mm thick (both side i.e. Inside & outside) with teak wood beading 35mm wide and 6mm thick around of thefoot rest, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable long rail of bed ply wood top and S & F new long rail of plywood top including all wood work surface shell be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable wooden stiffner of bed ply wood top and S & F new stiffner of bed ply wood top including all wood work surface shell be one coat of wood primer. Stiffner should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable wooden legs of bed ply wood top and S & F new legs of bed ply wood top including all wood work surface shell be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (Teak Wood) free from all knots & crack rest all as per shown in drawing and complete all as specified and directed.

Prepration of surface of bed ply wood top with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of bed ply wood top with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Table Centre (FD-246/247) :- Taking out of old unserviceable top of table centre and S & F new top of table centre (900X450X400mm) including 4 mm thick half round teak wood beading around of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable legs of table centre and S & F new legs of table centre including all wood work surface shall be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

All as per items ser No 147 but long rail of table centre.

All as per items ser No 147 but short rail of table centre.

All as per items ser No 147 but bottom side rail of table centre.

Prepration of surface of table centre with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table centre with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Table dressing ladies (FD-378) :- Taking out of old unserviceable mirror of table dressing ladies and S & F new mirror of table dressing ladies as per Drg. Mirror should be of 5.5 mm thick electro copper plated of polished sheet glass as specified ISI marked best quality, Rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable drawers of table dressing ladies and S & F new drawers of table dressing ladies including best quality fancy type pvc knob 32 mm dia, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable top portion of table dressing ladies and S & F new top portion of table dressing ladies , rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable bottom portion of table dressing ladies and S & F new bottom portion of table dressing ladies , rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable back portion of table dressing ladies and S & F new back portion of table dressing ladies , rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable side portion of table dressing ladies and S & F new Side portion of Table dressing ladies , rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable sliding glass of table dressing ladies and S & F new sliding glass with fancy type pvc knob 32mm dia of table dressing ladies , rest all as per shown in drawing and complete all as specified and directed.

M&L two coat french polish on all wooden surface of table dressing ladies as per shown in FD, rest all as per shown in drawing and complete all as specified and directed.

Table dressing gents FD- 379:- Taking out of old unserviceable mirror of table dressing gents and S & F new mirror of table dressing gents as per Drg. Mirror should be of 5.5 mm thick electro copper plated of polished sheet glass as specified ISI marked best quality, Rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable top portion of table dressing gents and S & F new top portion of table dressing gents , rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable bottom portion of table dressing gents and S & F new bottom Portion of table dressing gents , rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable side portion of table dressing gents and S & F new side portion of table dressing gents , rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable drawers of table dressing gents and S & F new drawers of table dressing gents including best quality fancy type pvc knob 32 mm dia, rest all as per shown in drawing and complete all as specified and directed.

M&L two coat french polish on all wooden surface of table dressing Gentss as per shown in FD , rest all as per shown in drawing and complete all as specified and directed.

Peg Table : Taking out of old unserviceable top of peg table and S & F new top of peg table including 4mm thick half round teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable legs/ top rail of peg table and S & F new legs/top rail of peg table including all wood work surface shell be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

Stool Dressing FD-282/252:-Taking out of old unserviceable legs of stool dressing and S & F new legs of stool dressing including all wood work surface shall be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

All as per item ser No 168 but long top rail of Stool Dressing.

All as per item ser No 168 but Short top rail of Stool Dressing.

Taking down of old canning from chairs,stool dressing CB (FD-280 , FD-202, FD-229, FD-279, FD-228,FD-282/252) M&L for recanning of both type of chairs with best quality white plastic cane 2 to 2.5mm wide and border with 4mm wide plastic cane. Weaving of chairs shall be godrej pattern. Rest all shown in Drg and complete all as specified and directed.

Table office clerk wooden (FD-381) : Taking out of old unserviceable top of Table office clerk wooden and S & F new top of Table office clerk wooden including 6mm thick half round teak wood beading alround of top. Top should be made of 18 mm thick prelaminated particle board bonded with phenol fromaldehyde confirming IS both side decorative type. Rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable Drawer box of table office clerk wooden and S & F new drawer box of table office clerk wooden including all wood work surface shell be one coat of wood primer except where painting is indicated in Drg.box should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck. Rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable drawers of table office clerk wooden and S & F new drawers of table office clerk wooden including best quality fancy type pvc knob 32 mm dia. Rest all as per shown in drawing and complete all as specified and directed.

Prepration of surface of table office clerk wooden with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table office clerk wooden with best work man ship. Rest all as per shown in drawing and complete all as specified and directed.

Table writing (1145x 600 x 760mm) (FD-275, FD-276) :Taking out of old unserviceable top of table writing (1145 x 600 x 760 mm) and S & F new top of table writing including 4 mm thick teak wood beading around of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white. Rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable legs of table writing (1145 x 600 x 760 mm) and S & F new legs of table writing (1145 x 600 x 760 mm) including all wood work surface shall be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck. Rest all as per shown in drawing and complete all as specified and directed.

All as per items ser No 177 but top (long) rail of table writing (1145 x 600 x 760 mm).

All as per items ser No 177 but top (short) rail of table writing (1145 x 600 x 760 mm).

All as per items ser No 177 but lower side rail of table writing (1145 x 600 x 760 mm).

All as per items ser No 177 but Stifner of table writing (1145 x 600 x 760 mm).

Prepration of surface of table writing (1145 x 600 x 760 mm) with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table writing (1145 x 600 x 760 mm) with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable drawers of table writing (1145 x 600 x 760mm) and S & F new drawers of table writing (1145 x 600 x 760mm) including best quality fancy type PVC knob 32 mm dia, rest all as per shown in drawing and complete all as specified and directed.

Sofa set 5/4 Seater (FD-281/373) :- Taking out of old unserviceable cushioned seat of sofa set 5/4 seater . S & F new 100 mm thick cool foam 40 D cushion of size 560 mm x 560 mm for seat of sofa set 5/4 seater . Cushion shall be covered with best quality tapestry cloth duly stitch. Colour /quality of cloth shall be approved by Engineer-in-charge. Rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable cushioned back of sofa set 5/4 seater . S & F new 100 mm thick cool foam 40 D cushion of size 560 mm x 560 mm for seat of sofa set 5/4 seater. Cushion shall be covered with best quality tapestry cloth duly stitch. Cololur /quality of cloth shall be approved by Engineer-in-charge. Rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable arms of sofa set 5/4 seater . S & F new arms of sofa set 5/4 seater. Arms should be made of 1 st grade hard wood well seasoned (teak wood) free from all knots & creck. Rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable front rail of sofa set 5/4 seater . S & F new front rail of sofa set 5/4 seater. Front rail should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck. Rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable back frame long rail of sofa set 5/4 seater . S & F new back frame long rail of sofa set 5/4 seater. Back frame long rail should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & cracks. Rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable legs of sofa set 5/4 seater . S & F new legs of sofa set 5/4 seater. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & cracks. Rest all as per shown in drawing and complete all as specified and directed.

Taking out of old unserviceable seat scantling of sofa set 5/4 seater . S & F new seat scantling of sofa set 5/4 seater. seat scantling should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & cracks. Rest all as per shown in drawing and complete all as specified and directed.

Prepration of surface of sofa set 5/4 seater with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of sofa set 5/4 seater with best work man ship. Rest all as per shown in drawing and complete all as specified and directed.

Side board small FD-371:- Taking out old unserviceable drawer handle of side board small and S&F new U type stenless steel drawer handle 100 mm x 40 mm of side board small with necessory fitting arengement. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV magnate locking device of side board small and S&F new magnate locking device of side board small wiith necessory fitting arrangement Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV hinges shutter of Side board small and S&F new stenless steel hinges of shutter of Size 3" of side board small with necessory fitting arrangement . Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV shutter of side board small and S&F new shutter of size as per drg including 4 mm thick half round teak wood beading alround of shutter .Shutter should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV side portion of side board small and S&F new Side portion of side board small of size as per drawing . Side portion of side board small should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV top portion of side board small and S&F new top portion of side board small of size as per drawing . top portion of side board small should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV bottom portion of side board small and S&F new bottom portion of side board small of size as per drawing . bottom portion of side board small should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV Leg portion of side board small and S&F new Leg portion of side board small of size as per drawing .leg portion of side board small should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV back portion of side board small and S&F new back portion of side board small of size as per drawing . Back portion of side board small should be made 12mm thick ISI marked commercial plywood. rest all as per shown in drawing and complete all as specified and directed.

Prepration of surface of side board small with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of side board small with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Side Board Large FD-372:- Taking out old unserviceable drawer handle of side board large and S&F new U type stenless steel drawer handle 100 mm x 40mm of side board large with necessory fitting arengement .rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV magnate locking device of side board large and S&F new magnate locking device of side board large wiith necessory fitting arengement .rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV hinges of shutter of side board large and S&F new stenless steel hinges of shutter of size 3" of side board large wiith necessory fitting arengement . Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV shutter of side board large and S&F new shutter of size as per drg including 4mm thick half round teak wood beading alround of shutter of side board large .Shutter should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV side portion of side board large and S&F new side portion of side board large of size as per drawing . side portion of side board large should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV top portion of side board large and S&F new top portion of side board large of size as per drawing . Top portion of side board large should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV bottom portion of side board large and S&F new bottom portion of side board large of size as per drawing . bottom portion of side board large should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV leg portion of side board large and S&F new leg portion of side board large of size as per drawing .leg portion of side board large should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV back portion of side board large and S&F new back portion of side board large of size as per drawing . Back portion of side board large should be made 12mm thick ISI marked commercial plywood. rest all as per shown in drawing and complete all as specified and directed.

Prepration of surface of side board large with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of side board large with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Bin solid linen FD-244:-Tacking out old UNSV leg of bin solid Linen FD-244. S&F new leg bin solid Linen including all wood work surface shell be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified and directed.

All as per items ser No 212 but long rail of bin solid linen FD-244.

All as per items ser No 212 but short rail of bin solid linen FD-244 .

Taking out old UNSV top of bin soliid linen and S&F new top, top should be made of 06 mm thick ISI marked commercial plywood BWR quality with fixing of top sunmika size 36" x 18" incl four side bedding of top of bin solid linen FD-244. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV hinges of top shutter of bin solid Linen and S&F new stenless steel hinges of top shutter of size 3" of bin solid Linen with necessory fitting arengement .Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV botom of bin solid linen anf S&F new botom, botom should be made of 12 mm thick ISI marked commercial plywood BWR quality with fixing of botom size 36" x 18" of bin solid linen FD-244. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV back portion of bin solid linced and S&F New back portion, it should be made of 06 mm thick ISI marked commercial plywood with fixing of top sunmika of Size 32" x 10" of Bin solid linen FD-244. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV front portion of bin solid Linen and S&F new front portion, front portion should be made of 06 mm thick ISI marked commercial plywood with fixing of top sunmika of size 32" x 10", bin solid Linen FD-244. Rest all as per shown in drawing and complete all as specified and directed.

Tacking out old UNSV side wire mesh of bin solid linen and S&F new side wire mesh of size 14" x 10" including four side beding of wire mess of bin solid linen. Rest all as per shown in drawing and complete all as specified and directed.

Prepration of surface of bin solid linen with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all wooden exposed surface of bin solid linen with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

Table bed side :- Taking out old unserviceable drawer handle of table bed side and S&F new U type stainless steel drawer handle 100 mm x 40 mm with necessory fitting arengement. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV adjestable chhanel of drawer of table bed side S&F new drawer chhanel size 400 mm x 40 mm with drawer of table bed side wiith necessory fitting arengement .Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV magnate locking device of table bed side and S&F new magnate locking device of table bed side wiith necessory fitting arengement . Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV contineous piano hinges of shutter of table bed side and S&F new stainless steel contineous piano hinges of shutter of size 300 mm of table bed side wiith necessory fitting arengement Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV shutter of table bed side and S&F new shutter of size 300 x 300 mm including 4mm thick half round teak wood beading around of shutter .Shutter should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV side , top , bottom portion of table bed side and S&F new side , top and bottom portion of table bed side of size as per drawing . Side , top , and bottom portion of table bed side should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV back portion of table bed side and S&F new back portion of table bed side of size as per drawing . Back portion of table bed side should be made 06 mm thick ISI marked commercial plywood. Rest all as per shown in drawing and complete all as specified and directed.

Prepration of surface of table bed side with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table bed side with best work man ship, rest all as per shown in drawing and complete all as specified and directed.

TV trolley FD-E6/MAP/04:- Taking out old unserviceable drawer handle of TV trolley and S&F new U type stainless steel drawer handle of size 100 mm x 40 mm with necessory fitting arengement of TV trolley. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV adjustable chhanel of drawer of TV trolley S&F new drawer chhanel size 400 mm x 40 mm with drawer of TV trolley wiith necessory fitting arengement. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV magnate locking device of TV trolley and S&F new magnate locking device of TV trolley wiith necessory fitting arengement. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV trolley wheel of TV trolley and S&F new black castor wheel with TV trolley wiith necessory fitting arengement. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV top of TV trolley and S&F new top of size 760mm x 610mm including 4 mm thick half round teak wood beading around of top .Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old UNSV glass of TV trolley made of 6 mm thick glass as specified ISI marked best quality of size 610 mm x 330 mm wiith necessory fitting arengement. Rest all as per shown in drawing and complete all as specified and directed.

Prepration of surface of TV trolley with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of TV trolley with best work man ship. Rest all as per shown in drawing and complete all as specified and directed.

Chair writing (FD/E6/MAP/12) :- Taking out of old unserviceable seat and back of chair writting FD/E6/MAP/12 and S & F new seat and back of chair writing including all necessary work. Seat and back shall be covered with best quality tapestry cloth duly stitch. Colour /quality of cloth shall be approved and complete all as specified and directed.

Taking out of old unserviceable handle of chair writting FD/E6/MAP/12 and S & F new handle of chair writing including all necessary fitting. Handle shall be made with best quality black colour with rubber foam and necessory fitting arengement . Rest all as per shown in drawing and complete all as specified and directed.

M&L for preparing old painted steel surfaces of chair writing (FD/E6/MAP/12) and spray painted with one coat of synthetic enamel paint (black) to all external surface complete all as specified and directed.

Hat stand with mirror large FD-233/361/362 :- Taking out old unserviceable peg set of hat stand with mirror and S&F new aluminiem peg set of size 100 mm x 6 mm S type with necessory fitting arrangement of hat stand with mirror. Rest all as per shown in drawing and complete all as specified and directed.

Taking out old unserviceable mirror of hat stend with mirror and S&F new mirror of hat stend with mirror as per Drg. Mirror should be made of 5.5 mm thick electro copper plated of polished sheet glass as specified ISI marked best quality, Rest all as per shown in drawing and complete all as specified and directed.

Prepration of surface of hat stend with mirror with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all wooden exposed surface of hat stend with mirror with best work man ship. Rest all as per shown in drawing and complete all as specified and directed.

Peg set of six (FD-253):-Taking out old unserviceable peg of peg set of six and S & F new aluminiem peg of size 100 mm x 6 mm S type with necessory fitting arengement of peg set of six .Rest all as per shown in drawing and complete all as specified and directed.

M&L two coat french polish on all wooden exposed surface of peg set of six with best work man ship. Rest all as per shown in drawing and complete all as specified and directed.

GLOBAL ENGINEERS AND INNOVATORS

krishna Associate

M/S CHANDER SHEKHAR