PERIODICAL SERVICES, REPAIR TO FLOORING/PLASTERING, TILLING, LEAKAGE, SEEPAGE, OVERHEAD TANKS ,ROOFING, FALSE CEILING AND OTHER MISC ITEMS AT AF STN CHANDINAGAR UNDER AOR OF GE (AF) FARIDABAD

Amount

NOTE FOR ALL PAINITNG AND WATER PROOFING ITEMS :- The following precautionary measures shall be ensured by the contractor before and during execution of the work :- (i) All the painting works shall be got executed through original material manufacturing company or their authorised applicators as approved by GE and contractor should submit MOU with the manufacturing company and their authorised applicator alongwith performance guarentee otherwise recovery @ Rs 2000 per week will be made from contractor's dues from the date of commencement of work. Entire work shall be executed with the approved firm. All the material of smart periodical is to be precured only from approved firm and as mentioned against each item otherwise as per direction of Engineer in charge and application of materials to wall / ceiling surfaces to be done through smart automatic machines only and as mentioned against in respective BOQ items (ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-in-Charge/ Office in charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers.

Complete removal of old existing treatment of wall (External / internal) and ceiling finishes using mechanical dry wall sander machine (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 320 Grit or above to completely remove old existing treatment for wall and ceiling surface and ready to take new surface finishes complete as specified and as directed

Taking down cement plaster/grit wash from facia of any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed.

M&L for rendering 15 mm thick ready mix plaster on brick / concrete surface of external/internal surfaces of walls finished fair and even, complete all as specified and directed. Note :- Contractor is required to deposit readymix bags for 100% CA quantity to Engr -in-Charge within 15 days of issue of WO-1.

Material & labour for applying waterproof cement based putty @ 0.5 Kg(undiluted) per sq mtr. of average thickness of 1.5mm in two coats on prepared wall (External / internal ) and ceiling surfaces in following steps:- Step-1) Filling cracks in wall using crack seal compound asian smart care crack seal or equivalent as approved by GE. Step 2) Mix the putty powder @ 0.5 kg/sqm by adding 35 to 40% water by volume or as per approved manufacturer's instructions and mix it with electric putty mixer with the mixing capacity of min 2.5 kg putty per minute upto 5 to 10minutes . Step 3) Apply the first coat of the prepared mix with the help of fully automatic airless sprayer machine TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with bottom to top configuration. Step 4) Allow 6-8 hrs to dry putty surface. Step-5) Apply the second coat of the prepared mix with the help of fully automatic airless sprayer machine TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with horizontal configuration. Step-6) Allow 6-8 hrs to dry putty surface then prepare the surface by electronic wall sander machine to apply subsequent coats of primer complete all as specified and as directed. Note:- (i) Primer shall be measured and paid saperately under relevant item.

Material & labour for applying one coat of acrylic water based interior grade primer @ 0.7 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) or as per approved manufacturer's instructions to be applied with fully automatic airless sprayer machine TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall and ceiling (internal ) surfaces Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed complete all as specified and as directed.

Material & labour for applying with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for paint application with a flow speed of min 2.04 ltr per minute having a pressure of 3300 PSI of paint application with a flow speed of 2 ltr per minute having pressure of 3300 PSI two coats of high-sheen, anti- fungle , anti bacterial, low-VOC & highly washable luxury emulsion paint with @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) or as per manufacturer's instruction taflon surface protector of shade as approved complete all as specified and as directed .

Material & labour for applying one coat of acrylic water based Exterior grade primer @ 0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) as per approved manufacturer's instructions to be applied with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall (External ) surfaces Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Material & labour for applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint @ 0.2 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) of approved tint as per approved manufacturer's instruction over prepared and primed surface of external wall with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI .Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.

Material & labour for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material & labour for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed.

Supply & fixing in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair 3mm thick, plain sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.

S&F in repair 3mm thick sheet glass, frosted on one side , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.

M&L for preparing old surface of eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for writing letters, figures & digits (Block, Roman, Italic or Indian) building Nos 25 cm height with black background and white letters as approved by Engineer-In- Charge, complete all as specified and directed.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc. complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size n .exc 1.5 Sqm and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and as directed.

S&F solid ,PVC door frame, of size 50mm x 47mm, made out of 5mm one side prelaminated of any colour PVC sheet, reinforced with MS square tube complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. MS frame shall be covered with heat moulded prelaminated decorative any colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelaminated decorative colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site, complete all as specified and directed.

S&F Aluminum anodized frame for doors, windows, ventilators powder coating (Min thickness of powder coating 50 micron) with one or more rebated including jointing cleats for fixing etc complete all as specified.

S&F Aluminum anodized window and ventilator shutters side hung type without sash , aluminum sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing anodized aluminum snap beading screws anodized aluminum fittings such as peg stays 150mm long (one no) hinges type B-21 100mm long (2 no) suitable handle (01 no) for each leaf ,powder coating of any colour (Thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F 3mm thick, figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm each pane, complete all as specified and directed.

S&F for 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed.

S&F mild steel butt hinges, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to angle iron frame where required complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F for 125 mm aluminum handles cast type anodized complete all as specified and directed.

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth (without using extra cement), complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete surfaces of walls finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of oil emulsion distemper including priming plastered surface and surface with chalk whitening preparatory to distempering on surfaces of walls using mechanical spray machine/method by the authorised applicator of the manufacturer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer using mechanical spray machine/method by the authorised applicator of the manufacturer complete all as specified and directed.

S&F in repair 15mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, including taking down old U/S existing pipe, complete all as specified and directed.

S&F in repair 20mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, including taking down old U/S existing pipe, complete all as specified and directed.

S&F in repair 15 mm, Brass, CP ,central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm, Brass, CP, wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore, concealed type, chromium plated, Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors or fixed to wall complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors or fixed to wall complete all as specified and as directed.

S&F in repair 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15mm bore bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm bore, chromium plated, Stop angle valves, cast copper alloy screwed pressure, with crutch of butterfly handle,long shank and cup, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

S&F in repair shower roses, brass, chromium plated with or without swivel joints 125mm size incl fixing to steel pipe complete all as specified and directed.

S&F in polythene connection of low density polyethylene (LDPE) pipes of pressure rating 2.5 Kgf/Sqcm, 45cm long with and including two brass union couplings, heavy duty, suitable for 15mm bore pipe, one on each end for connecting polyethylene pipe to GI pipe and fixed complete all as specified and directed.

S&F in repair tubular towel rail, brass, chromium plated, 20mm dia, D type 60 cm long between flanges complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F for vitreous china squatting pan, Orissa pattern, size 580x440 mm, white with integral foot rest (exclusive flusing cistern& flush pipe) including cast iron 'P' or 'S' trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2 and necessary lean concrete, fixed as in repairs, including making good the surface to match with existing floor finish fixed as in repair, complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm , including cutting for and pinning in ends of brackets , including 32 mm dia CP waste waste fitting and PVC waste pipe of required length complete all as spcified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar and removing rubbish off the premises complete all as specified and directed.

M&L for granite tiles, 20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, including 20 mm thick bedding layer in cement mortar (1:6), complete all as specified and directed.

M&L for granite stone tiles, 20mm thick, machine cut as in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of mirror finish type including 15 mm thick screed in cement mortar (1:4) on brick or concrete surface complete all as specified and directed.

M&L for machine cut Kota stone slabs flooring, 18 to 20 mm thick, over 20 mm thick cement screed bed in cement (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 18 to 20 mm thick machine cut Kota stone slabs as in riser of steps, skirting, dado and pillar laid over 10 mm thick cement screed bed in cement mortar (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F in repair sink with drainage board, made of stainless steel sheet, 1mm thick, kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic, coloured tiles, in vertical surfaces 350x250mm x7mm / 450X350X 7mm / 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces of wall to receive vertical tiles complete all as specified and directed.

M&L for non-skid coloured ceramic, dark tiles, 7-8 mm thick, area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 20 mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L for 75mm thick, PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base, complete all as specified and directed.

M&L for Ist quality, Fully vitrified Ceramic tiles, 10mm thick, Dark shade (Square/ rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for Ist quality, Fully vitrified Ceramic tile of size 600x1200 mm, 10-12 mm thick, Dark shade, high glossy, polished as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cement mortar (1:6), complete all as specified and directed.

All as per item No 66 above but in vertical surface such as skirting, dado and risers including 10 mm thick rendering in cement 1:4 on brick or concrete surfaces of wall to receive vertical tiles.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified and directed.

Taking down of old existing roof treatment of any description including scrub and remove loose concrete, brick tiles, mud phuska, plaster, bitumen, oil grease and any other materials that might affect adhesion by wire brushing the surface and cleaning of the surface throughly with water and disposed off old materials from site complete all as specified and directed.

M&L for 50 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in padding/ base on roof, complete all as specified and directed.

M&L for rendering 20 mm thick plastering in cement mortar (1:4) on RCC roof slab, finish even and smooth for receive water proofing APP membrane inclding WPC @ 3% by weight of cement. Note : WPC will be measured and paid separately.

Supply only integral water proofing compound conforming to IS-2645-1975, complete all as specified and directed.

M&L for preparation of the plastered roof surfaces and S&F the APP water proofing membrane of minimum 3 mm thickness & weighing not less than 3.6 kg / sqm, black finished reinforced with non-woven ployster 160 gsm matt with a thermofusible finish laid over primer conforming to IS:3384-1965 @ 0.5 kg/sqm and thereafter apply hot blown bitumen 85/25 @ 1.20 kg/sqm torching overlaps with a propane or a butane gas torch with a overlap of 75 mm at the sides and 100 mm at the end sealing complete all as specified and directed.

M&L for Providing and applying three coats of Brushbond RFX of FOSROC or equivalent for 1mm DFT thickness @ 0.5 lit/sqm/coat, the waterproofing coating shall be Brushbond Roof Guard is a single component acrylic polymer modified, fibre reinforced high build & easy roller applied, brushable coating available in different colours for application in multiple layers, minimum 3 layer over a coat of primer application is recommended for best performance. Product shall have 70% minimum soild content, min 100% elongation, permeability as per BSEN 12390 part 8. The product is designed to be easily mixed on site using a slow speed drill fitted with a mixing paddle and then applied to the substrate using a brush or roller for best results complete incl cleaning the surface by wire brushing followed water jet to remove any laitance are loose flaky particles and incl racking out joints, hacking for key, scrubbing down with water etc complete all as per manufacturer’s specification and direction.

Disconnecting existing PVC tanks of capacity exc 250 & n exc 500 litres, setting aside (or lowering if required) for repairs, Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing the same in position and restore water supply to accommodation, complete all as specified and directed.

Disconnecting existing PVC tanks of capacity exc 500 & n.exc 1000 litres, setting aside (or lowering if required) for repairs, Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing the same in position and restore water supply to accommodation complete all as specified and directed.

S&F in repair 25mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, including taking down old U/S existing pipe, complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, including taking down old U/S existing tank, complete all as specified and directed.

S&F in repair 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, including taking down old U/S existing tank, complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness, including cover fillets and grid frame work, complete all as specified and directed.

M&L for aluminium anodised ,snap grid ,frame work of size 605 x605mm for false ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and directed.

M&L for 8 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 605 mm x 605mm grid, complete all as specified and directed.

M&L solid PVC Wall Lining/panelling consisting of 5mm thick prelaminated/Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

36SHRI RADHEY ASSOCIATES (BID ID -3472376)

High Tech Metal India (BID ID -3472403)

UNIVERSAL ENTERPRISES (BID ID -3472728)

GIAN BUILDERS (BID ID -3472773)

NAVEEN KUMAR TYAGI (BID ID -3472316)

SK INFRA INDIA (BID ID -3472357)