Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹22.1 LAccepted-Finance BRANHANANDA KORAKORA BARANGAY CUTTACK SADAR | CUTTACK | CUTTACK | ODISHA | ₹22.1 L | 1 | Accepted-Finance BEING L1 |
| 2 | 2₹22.1 LRejected-Finance AT PARIA PATAPUR PO KAKARUDRAPUR PS BALIANTA DIST KHORDHA | ₹22.1 L | 2 | Rejected-Finance NOT BEING L1 |
| 3 | 3₹22.1 LRejected-Finance | ₹22.1 L | 3 | Rejected-Finance NOT BEING L1 |
| 4 | 4₹23.3 LRejected-Finance AT LIG 103 WARD NO 38 P O NAYAPALI DIST KHORDHA | ₹23.3 L | 4 | Rejected-Finance NOT BEING L1 |
| 5 | 5₹24.8 LRejected-Finance | ₹24.8 L | 5 | Rejected-Finance NOT BEING L1 |
Tender Value
₹29.1 L
EMD Value
₹29,150
Closing Date
27 Jan 2026, 5:00 pmClosed
GM(C), OMC Ltd.
Office of the GM(C), OMC Ltd., Bhubaneswar
Renovation and Painting to Security Barrack, vehicle parking shed ,Board room, 2nos of rooms adjacent to Board room and corridor of ground floor and 1st floor of OMC Campus -II (Former Idcol) office, Bhubaneswar in the district of Khordha.
2026_OMC_124614_1
NIT No.20/OMC/CIVIL/2025
Open Tender
Civil Works - Others
120 days
ASHOK NAGAR BHUBANESWAR
RC, EPF Regd., GSTN, PAN, Registration in CDMS portal, Affidavits, experience, etc. as per DTCN requirements.
2 documents required · 2 mandatory
₹7,080
₹29,150
Yes
13 May 2026
16 Jan 2026
28 Jan 2026
16 Jan 2026
27 Jan 2026
16 Jan 2026
Civil work
Dismantling G.C.I. or A.C. Sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50m. lead etc. complete as per the direction of EIC.
Dismantling False Ceiling carefully including removing the bolts and nuts ,disposal of unservice materials and removing the debris within 50m. lead etc. complete as per the direction of EIC.
Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m. lead etc. complete as per the direction of EIC.
Closed deep chipping and cleaning to Floor surface for receiving cement concrete including cost of all labour,T & P required for the work etc. complete as per direction of EIC.
Dismantling and removing doors, windows and ventilators including refixing with hinges, fastening after repairing the same and removing the debris within 50m lead complete as per direction of EIC.
Dismantling and removing old tile flooring including removing the debris within 50m lead. including cost of all labours,T & P required for the work etc. Complete as directed by EIC.
Dismantling and removing old tile cladding including removing the debris within 50m lead. including cost of all labours,T & P required for the work etc. Complete as directed by EIC.
Supplying, fitting and fixing of colour G.C.I sheet (0.35mm thick) in roof including shaft sealing screw etc. complete with cost, conveyance of all required fitting as directed by EIC. (GCI Sheet of Jindal./ TATA)
Providing and fixing in position wood plastic composite door frame with appropriate length of ETA Approved carbon steel galvanized (minimum 5 microns) double threaded 6.8 grade Polyamide PA 6 grade sleeve HRD C 10 anchor suitable for fastenings both on concrete & masonary/aerated blocks including cost of all materials, labours, T & P etc required for the work. complete in all respect as directed by the Engineer-in-charge.
Providing and fixing of 30mm thick WPC Door Shutter(Solid) with teak edge leaping to the periphery of the shutter with pilishing as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by Engineer-in-charge.
Providing and fixing of 35mm thick WPC Door Shutter(Solid) with teak edge leaping to the periphery of the shutter with pilishing as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by Engineer-in-charge.
Supplying, fitting, fixing up Fully glazed Aluminium framed openable window (openable type)using 15micron anodised aluminium section 2082 as out section,9139 as mullion section,4124 as shutter section frame with tapered clip of section 4125 aluminium angle,rubber beading ,friction stay and angle with 5mm thick black glass as panel fitted with rubber bending including locking arrangement all fitting including cost of all materials, cost of all labour, T&P required to etc. complete as per direction of Engineer-in-charge.
Supplying all materials, labour, T&P and fixing Anti skid ceramic floor tile of 300mmx300mm size of approved brand and shade on 25mm thick cement mortar (1:4) (1 cement:4 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tiles complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work..(Tiles should be of Kajari/ Somany / RAK / Johnson)
Supplying all materials, labour, T&P and fixing ceramic wall tile of 200mmx300mm and above size of approved brand and shade in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement, slurry mixed with pigment to match the shed of tiles complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work. (Tiles should be of Kajari/ Somany/ RAK / Johnson)
2.5cm thick AS Flooring using 12mm (1/2”) size hard crusher broken granite chips of approved quality from approved quarry including watering and curing etc. complete to required levels laid in layers not exceeding 150mm thick including cost, conveyance, royalties of all materials and cost of all labour, T&P required for the work etc. complete as per direction of EIC.
16mm (5/8") thick cement plaster with (1:6) for finished smooth to surface of brick walls/Stone walls in all floors racking out the joints including watering and curing etc. Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC.
Providing and painting internal surface two coats with plastic emulsion paint over a coat of water based primer of approved quality and approved shade in all floors at all height by making the surface of wall smooth including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
Weather coat two coats of approved brand and shade over a coat of primer over exterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/ Berger/ Asian is to be used)
Painting two coats with of synthetic enamel paint of quality over a coat of red-oxide primer to iron works including cost of all materials cost of all labour and T&P, scaffolding etc required for the work etc. comp. (paints of Burger, Nerolac, J&N & Asian ICI Brand is to be used.)
Removal of stacked building rubbish, green waste, garbage etc from site & safe disposal of same far from the site( at a distance of 20Kms or more from the site) including cost of all labour, machineries, T&P etc required for conveyance, loading & unloading, watering & cleaning of site etc complete as per direction of EIC.
Supplying all materials, labour, T&P and fixing Wash Down water closet(European type W.C. pan) with internal 'S' or 'P' trap to the floor with wooden plug and chromium plate screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification and direction of the Engineer in charges.(Parryware/Hindware/Cera)
Supplying all materials, labour, T&P and fitting and fixing of 23'' IWC pan (Orissa pan) of appd. make with a pair of raised foot rest with 4'' dia PVC P trap including supply of necessary jointing materials, cement concrete, sand etc. for fixing the pan, foot rest P trap including cutting the floor and making god to the damages etc. all copmlete as per PHspecification and direction of the Engineer in charge. (Parryware /Hindware / Cera)
Supplying all materials, labour, T&P and fixing wash hand basin of size (24''x16'') with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in wall and making good the damages etc. all complete as per specification and direction of the Engineer in charges(parryware/ Hindware/Cera)
Supplying all materials, labour, T&P and fitting and fixing 12.50 litres/10 liters capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fitting such as symphonic arrangements 15mm nominal size brass/pvc ball valve with polythine float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 40mm dia porcelain enameled flush bend, 12mm dia pvc inlet connection pipe including cutting holes and making good the same and connection the flush bend with cistern and closet and connection the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.(Parryware/Hindware/cera)
Supplying all materials, labour, T&P and fixing standard sized 24" CP towel rail complete with CP brass brackets to wooden plugs with CP screws as per specification and direction of the Engineer in charges
Supplying all materials, labour, T&P and fixing standard sized CP towel ring 5'' dia complete with CP brass brackets to wooden plugs with CP screws as per specification and direction of the Engineer in charges.
Supplying all materials, labour, T&P and fixing (a) CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charges
Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP head shower etc with supply of or jointing materialsT&P etc complete as per specification and direction of the Engineer in charge.
Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP bib cock with supply of or jointing materialsT&P etc complete as per specification and direction of the Engineer in charge.
Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP pillar cock with supply of or jointing materials complete as per specification and direction of the Engineer in charge.
Supplying all materials, labour, T&P and fixing B.E mirror of size 600X450mm of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charges.(Saint Gobin)
Supplying all materials, labour, T&P and fixing standard 24"X5" sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charges
Supplying all materials, labour, T&P and fitting & fixing 15mm dia 1.50 mtr Health faucet with supply of jointing materials complete as per specification and direction of the Engineer in charge.
Supplying all materials, labour, T&P for fitting & fixing 110mm dia PVC single junction with door of Oriplast make including supply of all jointing materials like gaskets, adhesive, solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC.
Supplying all materials, labour, T&P for fitting & fixing 110mm dia PVC HR bend of Oriplast make including supply of all jointing materials like gaskets, adhesive, solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC.
Supplying all materials, labour, T&P for fitting & fixing and laying 110mm dia PVC plain bend including supply of all jointing materials like gaskets, adhesive, solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC.(Make:- Oriplast /Supreme)
Supplying all materials, labour, T&P for fitting & fixing and laying 20mm dia uPVC pipe (sch-80) and fittings including supply of all jointing materials like gaskets, adhesive, solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including scaffolding, testing etc. as per direction of EIC. (Make:ORIPLAST/ Hariplast / Supreme)
Supplying all materials, labour, T&P for fitting and fixing and laying 25mm dia (Sh-80) UPVC pipes and fittings including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil & rock & refilling the trenches including testing etc as per PH specification and direction of the Engineer in charges. (Make:- Supreme / Oriplast / Hariplast)
Supplying ,Laying and Fixing of Vinyl Flooring (I.S.I.) PVC (MF) impress roll-1.50mm thick including cost, conveyance, royalties of all materials and cost of all labour, T&P required for the work etc. complete as per direction of EIC
Dismantling wooden boardings in lining of walls & partitions within 10-25mm thick including removal of debries & disposal of same far from work site including all cost of labour,T&P etc complete as per direction of EIC.
Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials, labours, T&P ctc complete as per direction of EIC.
Injecting chemical emulsion Chlorpyriphos/ Lindane 1% concentration (in oil or kerosene based solution) into the existing masonary wall, Plywood work etc @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same with appropriate sealent including cost, carriage, loading & unloading of all materials, cost of labour, T&P etc required to complete the work in all respect as per direction of EIC.
Providing and fixing false ceiling with 12mm thick Gypsum board at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and alvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS :277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapere flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including cost, carriage, loading & unloading of all materials,cost of labour, scaffolding , T&P etc required to complete the work as per drawing & as per the direction of Engineer-in-charge.
Scrapping old paint with scrapper and sand papering including cost of all labours,T & P required for the work etc. Complete as directed by EIC.
Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures etc to complete the work in all respect as per the direction of the engineer-in-charge.
Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete.
Supplying ,Fitting and Fixing of Wall paper of approved quality and make etc Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC..
Providing, fitting and fixing of 35mm thick partly glazed BWR flush door made up with 32mm thick BWR board with 1mm thick both side laminated as per the specification complete with all materials, inclusive of all hardware material, hinges, nails, screws, doorknobs, handles, topper etc. including the cost of all materials, labour and T&P and overheads etc. complete. The exposed wood work shall be finished with automotive paint. two coats with primer. The rates also includes the cost of 40 x 25mm wooden beading for the partition in front of the door and finished with automotive paints and as per direction of EIC. (Make:Century/Gattani/Mayur)
Providing, fitting and fixing of 32mm thick BWR flush door made up with 30mm thick BWR board with 1mm thick both side laminated as per the specification complete with all materials, inclusive of all hardware material, hinges, nails, screws, doorknobs, handles, topper etc. including the cost of all materials, labour and T&P and overheads etc. complete. The exposed wood work shall be finished with automotive paint. two coats with primer. The rates also includes the cost of 40 x 25mm wooden beading for the partition in front of the door and finished with automotive paints and as per direction of EIC. (Make:Century/Gattani/Mayur)
Providing Panelling to Door Frames using 6mm thick WPC Board ,9mm thick antitermite and water proofing Ply alongwith 1mm thick lamination Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC.
Supplying, fitting & fixing of black granite floor tile 20mm thick above 0.40sqm etc Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC.
Providing and painting internal surface two coats with plastic emulsion paint of approved quality and approved shade in all floors at all height by making the surface of wall smooth including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge
Touchwood polishing two or more coats to have required polishing of approved quality and approved shade in all floors at all height by making the surface of smooth including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
Dismantlling IWC,Cistern etc including removing the debris within 50m lead. including cost of all labours,T & P required for the work etc. Complete as directed by EIC.
12mm (1/2") thick cement plaster with CM (1:4)and water proofing compound for finished smooth to Ceiling surface including watering and curing etc. Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC.
SFF of UPVC ventilator.including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by theArchitect / Engineer-in-charge.
Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP flange including all cost of materials T&P etc complete as per specification and direction of the Engineer in charge.
Earth work in in ordinary soil including including dressing and leveling the bed up to the required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P shoring and shuttering and dewatering if required etc. complete as directed by EIC
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.54 MB
BOQ_575931.xls
BOQ • 0.35 MB
SBD_1.pdf
Tender Documents • 3.28 MB
Download all tender documents and submit your bid