REPAIR/MAINTENANCE OF PERIMETER LIGHTS, STREET LIGHT, POLES, CABLE AND OTHER CONNECTED ITEMS IN THE AREA OF 1 FOD, CHHIBER, 151 TA AND OTHER LOCATIONS UNDER GE (UTILITIES) UDHAMPUR.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtrs below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanised iron strips 32 x 6 mm by means of nuts both check nuts and washers made of galvanised iron or steel earth strip protected by galvanised iron pipe 40 mm bore medium grade upto ground level as directed and including concrete pit in PCC ( 1 : 3 : 6) type C1 pre cast RCC cover slab 30 cm x 30 cm x 10 cm thick including reinforcement with 8 mm dia steel deformed bars at the rate of 10 cm both ways with one lifting handle made of 8 mm dia MS bar funnel, wire mesh 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal on coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 5 of MES schedule Pt-I and testing on completion including earth pit chamber board of 3.15 mm thick mild steel sheet sheet of size min 45cmx30cm fixed with 12 mm thick MS rod two nos upto 90 cm height by nuts/bolts including spray painting with two coats of synthetic enamel black paint complete MS sheet both side including writing letter min 6 cm height i.e Earth pit No . Location Earthing test value and date and other letters complete all as directed by Engr-in-Charge.

Earthing complete with GI steel earth plate electrode 60cm x 60cmx6.3mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI iron or steel earth wire 4mm dia (8 SWG) by means of nuts, volts checks nuts and washers made of GI iron or steel earth wire protected by GI iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, pre-cast RCC over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 5 of MES schedule Part-I and testing after completion.

Taking down unserviceable street/Security light fittings of any capacity, type , make and position (such as CFL light fitting, HPSV/MH/LED and from any tye and any height of pole etc) for repairing the same after complete dismantling, checking replacement of unserviceable parts and components as required and make the light fittings operational to give rated illumination incl cleaning the acrylic cover and refixing the same with necessary electrical connection complete all as specified and directed. (The U/S street light fittings should be removed from site and to be stored at one place for repairing purpose. The Nos of U/S light fittings to be removed, the place of repairing and refixing schedule will be as per direction and specified by Engr-in-Charge.) Note :- (Spare parts/components shall be measured and paid separately) under respective item Sch 'A').

S&F in replacement of driver for LED light fitting of capacity 60W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. as per existing make and model complete all as specified and directed by Engr-in-Charge.

S&F in replacement of driver for LED light fitting of capacity 60W to 90W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge.as per existing make and model complete all as specified and directed by Engr-in-Charge.

S&F in replacement of driver for LED light fitting of capacity 120W to 150W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. as per existing make and model complete all as specified and directed by Engr-in-Charge.

S&F in replacement of driver for LED light fitting of capacity 210W to 300W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. as per existing make and model complete all as specified and directed by Engr-in-Charge.

S&F in replacement of driver for LED light fitting of capacity 40 to 45W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. as per existing make and model complete all as specified and directed by Engr-in-Charge.

S&F in replacement of panel for LED light fitting of capacity 60W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : as per existing make and model complete all as specified and directed.

S&F in replacement of panel for LED light fitting of capacity 60W to 90W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. as per existing make and model complete all as specified and directed by Engr-in-Charge.