C/O Assistant District Attorney office building at Nadaun Distt. Hamirpur

Amount

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts, disposed materials to be neatly levelled.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Filling in plinth with coarse sand under floors including watering, ramming consolidating and dressing complete in all floor levels and in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish including centring, shuttering, strutting, propping and centring with wooden battens and ballies fo all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Foundation Footings, basis of column etc mass concrete

Flat surfaces such as soffits of suspended floors, roofs, landings shelves and the like etcetera In all thickness in any floor level.

Columns, pillars, posts and struts, square rectangular/polygonal in plan.

Beams, cantilivers, girders and lintels such as soffits of beams, beam haunching, cantilevers girder, bressumers and lintels of all height/thickness.

Vertical surfaces such as walls any thickness partitions and the like including attached pillasters, buttresses, plinth and string courses and the like etcetera.

Edges of slabs and breaks in floors and walls under 20cm (Twenty centimetres) wide.

Stair Case with sloping of stepped soffits excluding landing but including preparing of the surface and finishing of nosing upto floor to all level.

Providing and laying cement concrete mechanically mixed and vibrated 1:6:12 ( One cement : six coarse sand : twelve graded/crushed stone aggregate 40mm (Forty millimetre) nominal size and curing complete excluding cost of form work in foundation and plinth including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete mechanically mixed and vibrated1:5:10 (One cement : five sand : ten graded/crushed stone aggregate) 40mm (forty millimetres) nominal size and curing complete including cost of form work in foundation and plinth in breast and retining walls etcetera including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete mechanically mixed and vibrated 1:3:6 (One cement : three coarse sand : six graded/crushed stone aggregate) 20mm (twenty millimetres) nominal size and curing complete in foundation and plinth including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying damp proof course with 38mm ( thirty eight millimetre) thick cement concrete 1:2:4 ( one cement:two sand: four graded stone aggregate 12.5 mm ( twelve point five millimetre) nominal size and curing complete and curing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying a coat of hot bitumen ( mexphalt 80/100 ( eighty oblique hundred ) or equivalent ) using 1.70kg ( one point seventy kilogramm ) per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. .The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying design mix cement concrete of grade M20 ( M- Twenty) to obtain the minimum crushing strength of 20 N/mm2( Twenty Newton per meter square) with minimum cement content of 350.00 kg( three hundred fifty kilogramme) per cubic metre mechanically mixed and vibrated including curing complete for reinforced cement concrete and curing complete including the cost of form work upto all floor levels in all heights in string courses, coping, bed plates, anchor blocks, plain/ornamental window sills and the like including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. .The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying design mix cement concrete M25 ( M- Twenty five) with characteristics strength of 25N/mm2( Twenty Newton per meter square) with minimum cement content of 400.00 kg( four hundred kilogramme), mechanically mixed and vibrated and curing complete excluding the cost of form work and reinforcement for reinforced concrete work upto all floor levels in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Foundation footings bases of columns and the like and mass concrete

Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilever upto all floor level

Stair case except spiral stair cases excluding landing but including preparing of topsurface and finishing of nosing upto all floor height in all thickness.

Wall any thickness but not less than 0.10 mtr. (Zero point ten metres) thick attached pilasters buttersses plinth and string courses etcetera.

Providing and laying design mix cement concrete M25 ( M- Twenty five) with characteristics strength of 25N/mm2( Twenty Newton per meter square) with minimum cement content of 400.00 kg( four hundred kilogramme), mechanically mixed and vibrated and curing complete excluding the cost of form work and reinforcement for reinforced concrete work upto all floor levels in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Columns, pillars, posts and struts upto all floor level

Applying cement slurry on reinforced cement concrete slab or cement concrete work using 2.75kg (Two point seven five kilogramme) of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the cement surface complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 ( One cement : Three coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing throating or plaster drip and moulding to Reinforced cement concrete chajja and slab upto all floor level/heights including entire carriage of materials within all leads and lifts drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing tor steel reinforcement (TATA/SAIL) for reinforcement cement concrete work including bending, binding, straightening and placing in position including the cost of binding wire complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in cement mortar 1:6 ( One cement : six coarse sand) in foundation and plinth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in cement mortar 1:6 ( One cement : six coarse sand) in super structure upto all floor levels in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Half brick masonry using second class common burnt clay building bricks in cement mortar 1:4 (One cement : four coarse sand) in super structure upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetre) thick waterproof HDMR (Action Tesa/Kitply/Century ply make ) commercial board in shutters for Cup boards including & fixing with nickel plated piano hinges with screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetre) thick water proof commercial board (Action Tesa/Kitply/Century ply make ) in shelves/box for cup board with butt joints and fixing with nails and screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetre) thick HDMR water proof and anti termite resistant sheet of ( Action Tessa/Novapan, Kitply, National Archid Ply/Green ply make) approved shade and colour in back side of Cup boards panelling and wall lining including mitring at junction butt jointing and nail complete upto all floor level/heights including entire carriage of materials within all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 1.00 mm (One millimetre) thick coloured or plain lamination sheet (Sunmica) on board/plywood sheets of approved shade in matt finish of approved make as approved by Engineer -in- charge for all exposed portion i.e. shutters of cup barod with approved adhesive and nails including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing square edges cover fillets (beading) 19mmx6mm (ninteen millimetre into six millimetres) section including mitring at junctions with wood screws and nails complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing angle iron door window clearstory window frame in built up section manufactured from (TATA/SAIL Make ) steel angle iron section of 35x35x4mm and 50mmx4mm (thirty five into thirty five into four milimetre and fifty into four millimetres) thickness and mild steel. flat in combination welded together to make one frame including hinges jamb lock jamb bed and if required angles thrashold of mild steel angle 50x25mm ( fifty into twenty five milimetre ) welded or rigiddly fixed by the mechanically in arm legs with split and tails jamb including steel built hinges 2.50mm ( two point five milimetre ) with provision of locking arrangement and shock abservers a specified and applying a coat of approved steel primer after pretreatment of the surface including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing powder coated anodized aluminium work for doors, windows, ventilators and partitions with Jindal/Hindalco make aluminium extruted built up standard tubular and other sections of approved make confirming to IS-733 and IS-1285 anodized transparent or dyed to required shade according to IS- 1868 minimum anodized coating of grade AC(S) fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions and top and bottom, sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight mitred and jointed mechanically where ever required including cleat angle, aluminium snap leading for glazing/ paneling, C.P. brass stainless steel screw, all complete as per architectural drawing and the directions of Engineer-in-Charge including all incidentals including entire carriage of materials in all leads and lifts.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Doors, Windows and Ventilators and glazed partitions frames upto all floor level.

For Shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provisions for fixing of fitting wherever required including the cost of PVC/Neoprene gaskets required (fitting and glazing/panelling shall be paid for seprately).

Providing and fixing glazing (Modi Guard or its equivalent) in aluminium/door, window, ventilators, shutters and partitions etc. with PVC/neoprene gasket etc complete as per Architectural drawings including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge (Cost of Aluminium snap, beading, shall be paid in basic item) glazing with glass panes of 5.00mm (Five point zero millimetres) thickness (weight not less than 13.75 kg/sqm) (Thirteen point seventy five kilogramme per square metre) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing fly proof galvanized M.S. wire gauge (Horse fly make or its equivalent) designation 140G (One hundred forty G) with wire of dia 0.71mm (Zero point seven one millimetres) to windows and clerestory windows including 60x20mm beading rubber (Sixty into twenty millimetres) or screws upto all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing angle iron cup board frames manufactured from M.S. angle iron section 25x25x5mm ( twenty five into twenty five into five millimetre) thickness including hinges jamb, lock jamb , beed and if required angle thrashold of mild steel angle 25x25mm ( twenty five into twenty five millimetre) welded or rigidly fixed by mechanical means , lugs with split end tails to each jamb including steel butt hinges 2.5mm ( two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 35mm (Thirty five millimetre) thick including black enameled mild steel butt hinges flush door shutters core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with vertical grains of cross band and face veneers on one face and commercial ply veneering with vertical grains of cross band on other face of shutters (Action TESSA/Kitply/Century ply make) complete in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing mild steel grills (Tata /Sail, Jindal and its equivalent and primary manufacture and as approved by the Engineer-in-Charge) of required pattern in wooden /steel/ alluminium frames of windows with screw upto all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing powder coated aluminium sheet 1mm (One millimetres) thick (Jindal make) in expansion joint vertically fixed with screws and nails complete in all floor level & in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing plain asbestos cement sheet ceiling of approved quality lining with butt jointing and wood screws(frame work and cover filets to be measured and paid for separately) 6mm (six millimetres) thick including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing anodized aluminium (Zindal make) sliding door bolts anodized / powder coated colour or shade with bolts and nuts screws etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

300x16mm (Three hundred into sixteen millimetre) nominal size.

250x16mm (Two hundred fifty into sixteen millimetre) nominal size.

Providing and fixing aluminium (Zindal make) tower bolts (barrel type) anodized/ powder coated transparent or dyed to required shade and colour with screws including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

200x10mm (Two hundred into ten millimetre) nominal size.

150x10mm (One hundred fifty into ten millimetre) nominal size

100x10mm (One hundred into ten millimetre) nominal size

Providing and fixing aluminium (Zindal make) handles anodized/ powder coated transparent including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

125mm (One hundred twenty five millimetre)

100mm (One hundred millimetre)

75mm (Seventy five millimetre)

Providing and fixing 50mm ( Fifty milimetre ) bright finished brass cup board or ward robe knob (Zindal make) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 65x35mm ( sixty five into thirty five millimetre) special quality bright finished CB locks ( Harison or its equivalent) with six levers including screws etcetera com[plete ( Indian make) ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One Hundred millimetre) bright finished brass floor door stopper ( jindal or its equivalent) with rubber cushion screw etcetera to suit shutter thickness upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing bright finished hard drawn hooks and eyes 150mm (One hundred fifty millimetres) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetres) thick and 100mm (One hundred millimetre) wide pelmet with 25mm (Twenty five millimetre) dia wooden curtain rod and brackets including fixing with 25x3mm (Twenty five into three millimetre) M.S. Flat 10cm (Ten centimeters) long and plugs etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 10mm (Ten millimetre) dia bright finished brass ball catcher ( Jindal make) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetres) dia bright finished hasps and stapples (safety type) with necessary screws etcetera upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC rigid foam sheet 1mm (One millimetre) thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mmx60mm (Seventy five millimetres into sixty millimetres) with M.S. flat 40x6mm (Forty into six millimetres) welded to the baluster moulded hand rails to straight length complete of 2nd class Indian Teak Wood including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Kota Stone mirror polished in uniform colour 55x55cm ( fifty five into fifty five centimetre) minimum size flooring 7.5cm (Sevent point five centimetre) wide granite stone border along the wall as approved pattern finish, 20mm ( twenty millimetre) average track base of cement mortar 1:4 ( one cement : four sand) laid over and joints with gray cement slurry round with pigment to match the shade of slab including rubbing and polishing complete 25mm ( twenty five millimetre) thick as approved pattren finish upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Kota stone mirror polished in uniform colour, 210x30cm (Two hundred ten into thirty centimeter), minimum size flooring 20mm (Twenty millimetre) average track base of cement mortar 1:4 (One cement : four sand) laid over and joints with grey cement slurry round with pigment to match the shade of slab including rubbing and polishing complete 25mm (Twenty five millimetre) thick as approved pattern finish upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Kota stone having size 55x10cm ( fifty five into ten centimetre) mirror polished in uniform colour slab 25mm ( twenty five millimetre) thick in risers of steps, skirting dado and pillars laid in 12mm ( twelve millimetre) thick in cement mortar 1:3 (one cement : three sand) and jointed with grey cement and pigment to match including rubbing and polishing complete as approved pattern finish upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying kota stone having size 210x17cm (Two hundred ten into seventeen centimeter) mirror polished in uniform colour slab 25mm (Twenty five millimetre) thick in risers of steps, skirting dado and pillars laid in 12mm (Twelve millimetre) thick in cement mortar 1:3 (One cement : three sand) and jointed with grey cement and pigment to match including rubbing and polishing complete as approved pattern finish upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 20mm (Twenty millimetre) thick Baroda green granite work in single piece (Table rubbed and Polished) in flooring, treads, steps, landing, skirting and risers 20mm(Twenty millimetre) thick base in cement mortar 1:3 ( One Cement : Three sand) including jointing with cement mortar 1:2 ( One white cement : Two marble dust) with an admixture of pigment to match the shade of the granite Barda green makrana marble within all leads and lifts as directed by the Engineer-in-Charge including entire carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octroi, royalty, malkana, toll tax, sale tax or other taxes imposed by the Government.

Making moulding nosing in Kota stone/marble/granite including returned moulded end and angle to moulding complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 10mm ( ten millimetre) thick double charged polished antiskid water proof stain and impact resistant heavy duty vitrified tiles of (Somany/ Kazaria/ Nitco/ Rak make) or equivalent 600x600x10mm ( six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring kerb laid over 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete . in pattren finish of approved ,colour and shade upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying vetrified tiles double charge/ultra charge of (Somany/ Kazaria/ Nitco/ Rak make) or equivalent 600x600x10mm ( six hundred into six hundred into ten millimetre) thick in grey/coloured or required shade in skirting risers of steps and dado on 12mm thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. in pattren finish of approved ,colour and shade upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing rectified ceramic tiles 30x30cm ( thirty into thirty centimetre) of (Somany/ Khazaria/ Nitco/ Rak make) or equivalent tiles 8mm ( eight millimetre) thick in flooring treads of steps laid on a bed of 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement. in pattren finish of approved ,colour and shade upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .

Providing and fixing rectified HD series/digital cermic tiles of size 600x300x8mm (Six hundred into three hundred into eight millimetre) or 450x450x8mm (Four hundred fifty into four hundred fifty into eight millimetre) thick in skirting risers of steps and dado 12mm ( twelve millimetre) thick in cm 1:3 ( one cement : three sand and jointed with cement slurry (Somany/ Khazaria/ Nitco/ Rak make) in pattren finish of approved ,colour and shade upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .

40mm (Forty millimetres) thick cement concrete flooring 1:2:4 ( One cement : two sand : four graded stone aggregate 20mm (Twenty millimetres) nominal size laid in one layer finished with floating coat of neat cement upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm ( fifteen millimetre) cement plaster skirting upto 30 cm (thirty centimetre) height with cement mortar 1:3 (one cement : three course sand) finished with a floating coat of neat cement including rounding of junctions with in all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 40mm wide and 4mm thick ( forty millimetres wide and four millimetres thick ) glass strips in joints of terrazzo flooring with in all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying automatic vibro hydraulically compressed and polished medium shade precast terrazzo tiles 30cmx30cmx25mm (Thirty centimetres into thirty centimetres into twenty five millimetres) I.S.I. marked I.S. No. 1237 in 70% white 30% grey cement. The ratio of chips shall be 55% white & 15% of each maroon, yellow and dark green shade. The size of chips shall be O, B, 2B of NTC or its equivalent. The sample of the tile shall be got approved from the Engineer-in-Charge before its execution at site of laid in floors treads of steps and landing on a bed of 25mm average thickness of cement mortar 1:6 (One cement : six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles wherever required including rubbing and polishing complete with the shade of tiles in any floor layer complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing precast terrazzo tiles hydraulic compressed and polished 20mm (Twnety millimetre) thick (With marble chips of specified sizes ) in skirting, riser of steps not exceeding 30cm (Thirty centimetres) heights and landings on a bed of 10mm (Ten millimetres) average thickness of cement mortar 1:3 (One cement : three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required ) The ratio of chips shall be 55% white & 15% of each maroon, yellow and dark green shade. The size of chips shall be O, B, 2B of NTC or its equivalent. The sample of the tile shall be got approved from the Engineer-in-Charge before its execution at site including rubbing and polishing complete with tiles of medium shade I.S.I. marked IS No. 1237 as per specification complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 60mm ( sixty millimetre) thick Pre - Polished NTC or its equvalent heavy duty precasts cement concrete interlocking paver blocks vibro compacted upto M-40 ( M- forty) grade I.S.I marked including border or kerb block grey or coloured over sub base of concrete with 25mm ( twenty five millimetre) thick average thickness of cement mortar 1:4 ( one cement:four coarse sand)laid over and jointed with neat cement slurry mixed with pigment to match the shade of block including curing rubbing polishing complete .in pattren finish of approved ,colour and shade sub base concrete floor to be paid for separately) and pattren including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .

Providing and fixing in position collapsible steel shutters San Harric steel man Industries, PD Industries metal windows, Chandni Industries, Ganpati Udhyog (Rajpura) with vertical channels 20mmx10mm x 2mm ( twenty millimetre into ten millimetre into two millimetre) and braced with flat iron diagonal 20mmx 5mm ( twenty millimetre into five millimetre) size with top and bottom, rail of T-Iron 40mmx40mmx6mm (Forty into forty into six millimetre) with 38mm (Thirty eight millimetre) dia steel pully complete with bolts and nuts locking arrangements, stoppers, handles, including applying a priming coat of red lead paint including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .

Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet roofing over steel trusses TATA/Sail Make. Prepainted single skin trapezoidal profile sheeting 0.60mm (Zero point sixty millimetre height) having 1060mm (One thousand sixty millimetres) cover width (overall width 1126mm (One thousand one hundred twenty six millimetres) 28mm (Twenty eight millimetres) crest depth at 353+2 centre to centre crest distance. There will be two ribs at the center for stiffening having depth of 2.5mm (Two point five millimetres). The main crest width at top of 25mm (Twenty five millimetres) and at the lower 81mm (Eighty one millimetres) base metal of cold rolled steel coil with zinc coating. Top coat with regular modified polyester coating of approved shade and balancing reverse coat with polyster paint. Fixing of sheet shall be with self drilling and self tapping screws of size 5.5mm (Five point five millimetres) dia 5.5mm (Five point five millimetres) length with EDPMC seal. The material supply will be accompanied by test certificate and 20 years warranty from company against corrosion fading of colour and manufacturing defects. The shade and sample of prepainted sheet shall be got approved from the Engineer-in-Charge with all accessories as required and the direction of Engineer-in-Charge in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (Sixty centimeters) overall with 0.60mm) Zero point six zero millimetres) thick prepainted steel sheets TATA/Sail Make in roofing with but dipped metallic zinc coated sheets with top coat of regular modified polyesters organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I.limpet and bitumen washer complete with all accessories as required upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing valleys 60cm (Sixty centimeters) (overall 0.60mm (Zero point six zero millimetres) thick prepainted steel sheet TATA/Sail Make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of back coat of polyesters of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts & nuts 6mm (Six millimetres) dia with prepainted G.I. limpet & bitumen washers complete with all accessories as required in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing flushing 38cms (Thirty eight centimeters) overall with 0.60mm (Zero point six zero millimetres) thick prepainted sheet TATA/Sail Make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of 20 (Twenty) microns over 5 (Five) micron primer coating plus back coat polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm dia and prepainted GI limpet bitumen washer complete with all accessories as required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60 mm (Zero point Sixty millimetrer) thick prepainted sheet TATA/Sail Make 30cm (Thirty Centimeter) wide 90 cm (Ninety Centimeter) over all semicircular plain galvanized iron/ Prepainted Sheet gutter with iron brackets 40x3mm (Forty into Three millimetre) size bolts and nuts and washers etcetera including making necessary connection with rain water pipe complete as per design as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing MS BP Sheet 1.66mm to 2.00mm (One point sixty six to two millimetres) thick of TATA/Sail make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per instruction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC stay and clamps for rain water pipe 110mm ( one hundred ten millimetre) dia (Phenolex/Vectus or its equivalent) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face110mm (One hundred ten millimetre) dia PVC (Finolex/Vectus make) rain water pipes of working heaving pressure not less than 4.5kg/Cm² ( four point five kilogram per centimetre square ) including filling the joints with approved adhesive complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC plain bend 110mm (One hundred ten millimetre) dia on wall face PVC (Finolex/Vectus make) accessories for rain water pipes working pressure not less than 4.5kg/Cm² ( four point five kilogram per centimetre square ) including filling the joints with approved adhesive complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC concrete type bend 110mm (One hundred ten millimetre) dia on wall face PVC (Finolex/Vectus make) accessories for rain water pipes working pressure not less than 4.5kg/Cm² ( four point five kilogram per centimetre square ) including filling the joints with approved adhesive complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC plain shoe 110mm (One hundred ten millimetre) dia on wall face PVC (Finolex/Vectus make) accessories for rain water pipes working pressure not less than 4.5kg/Cm² ( four point five kilogram per centimetre square) including filling the joints with approved adhesive complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections (TATA/SAIL Make ), trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights In trusses, rafters and purlins in building and the like works including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections (TATA/SAIL Make ), trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights In grating,frames, framed guard bars, ladders, railing brackets and similar works including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections (TATA/SAIL Make ), trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights In beams, joists channels, angles tees, flats and the like works including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. round holding down or anchor bolts with nuts and washers (TATA/SAIL Make ),plates complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing moulded hand rail of MS (TATA /SAIL Make ) hollow pipe 50mm ( fifty millimetre) dia welded in straight length over MS flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat and blausters of railing shall be measured and paid for separately) upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter coarse sand papering and knotting ready mixed paint brushing wood primer pink ( ASAIN/NEROLAC/ICI-DULUX ) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with readymixed paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter, coarse sand papering and stopping with readymixed paint white ( ASAIN/NEROLAC/ICI-DULUX ) complete including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with white readymixed paint (ASAIN/NEROLAC/ICI-DULUX ) complete as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Polishing two coats with French polish (ASAIN/NEROLAC/ICI-DULUX ) of required/approved shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and coarse sand papered smooth and incluidng a coat of wood filler upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying level plaster with Birla white wall care putty with two or more coats to achieve avrage thickness of 2mm ( two milimetre ) over plastered surfaces after thoroughly brushing the surface free from mortar dropping, dust, loose materials and other foreign matter coarse sand papered smooth to give fine finish to the surface complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm (Fifteen millimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior/exterior plastering upto any floor level including arrises, internal rounded angles, chamfers, grooves and/or rounded angles not exceeding 80mm (Eight millimetres) in girth and finished even and smooth in cement mortar 1:6 ( One cement : six coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm (Fifteen millimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto any floor level including arrises, internal rounded angles, chamfers, grooves and/or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

20mm (twenty millimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto any floor level including arrises, internal rounded angles, chamfers, grooves and/or rounded angles not exceeding 80mm (Eight millimetres) in girth and finished even and smooth in cement mortar 1:6 ( One cement : six coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Forming groove of uniform size 12mm wide and 12mm deep (Twelve millimetre wide and twelve millimetre deep groove) in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying Birla white wall care putty with two coats ( JK wall putty/ Birla white putty ) to achieve avrage thickness of 1mm ( one milimetre ) over plastered surfaces after thoroughly brushing the surface free from mortar dropping, dust, loose materials and other foreign matter coarse sand papered smooth to give fine finish to the surface complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and ncluding preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Readymixed primer (ASAIN/NEROLAC/ICI-DULUX ) complete within all leads and lifts as directed by the Engineer-in-Charge including entire carriage of materials in all leads and lifts and including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Wall painting (two coats) with acrylic emulsion paint (ASAIN/NEROLAC/ICI-DULUX ) of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including entire carriage of materials in all leads and lifts as per the direction of Engineer -in Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with Paint other than white (ASAIN/NEROLAC/ICI-DULUX ) complete within all leads and lifts as directed by the Engineer-in-Charge including entire carriage of materials in all leads and lifts and including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering two coats with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture ( ASAIN/NEROLAC/ICI-DULUX ) after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and coarse sand papered smooth priming coat with distemper primer upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apex Ultima Asian Paints) or its equivalents on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including coarse sand papered smooth complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing plinth protection 50mm (Fifty millimetres) thick in cement concrete 1:3:6 (One cement : three coarse sand : six graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing under layer for plinth protection of 75 mm (Seventy five millimetres) thick (unconsolidated) bed dry brick/stone aggregate 40mm (Forty millimetres) nominal size with rammed and consolidated and grouted with fine coarse sand including preparation of ground including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing course rubble hammer dressed ‘U’shape open surface drain with side wall 15x22 cms (Fifteen into twenty two centimetres) in cement mortar 1:6 ( One cement : six course sand) and inside plastering with cement plaster 1:3 ( One cement : three course sand) including earth work and laying 10cm (Ten centimetres) cement concrete in 1:5:10 ( one cement : five course sand : ten graded crushed stone aggregate 40mm (Forty millimetres) nominal size) and 7.5 cm (Seven point five centimetres) cement concrete 1:2:4 ( One cement : Two course sand : four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size and finished with a floating coat of neat cement complete as per standard design including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

WATER SUPPLY AND SANITARY INSTALLATION

Providing and fixing viterous china water closet squatting pen (Indian Type W.C. pan size 580 mm ( five hundred eighty millimetre) (Earth Work, bed concrete foot rest and trap to be measured and paid for separately (Orrissa Pattern) hindware ,cera Universal Pan No. 2071 ( two thousand seventy one) (58x40) ( ffity into forty) Snow White Shade including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing viterous china Wash down water closet (European Type W.C. Pan) with integral P or S strap including jointing and trap with soil pipe in cement mortar 1:1 (one cement : one sand) seat and cover to be measured and paid for separately Angle Indian Universal closet of approved shade of hindware or cera EWC No 20049 ( twenty thousand forty nine) Snow White Shade including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing sand cast iron 100mm ( one hundred millimetre) size P or S strep for water closet (squatting pan) including jointing the trap with the pan and sail pipe in cement mortar 1:1 ( 1 cement : 1 sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT coloured/white high density polythylene/poly propylene 10 litre (Ten litres) capacity (full flush) Europeon standard make of Prayag, Viking control low level flushing cistern with fittings with a pair of brackets with fitting such as lead valve siphon 15mm (fifteen millimetre) nominal size PVC ball valve with polythene float with flush button couplings for connection with inlet and outlet and over flow pipes 40mm ( forty millimetre) dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow) pipe to be measured and paid for separately including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing soft closing plastic seat (solid/Hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers solid type white plastic seat and cover of (Continental Series No. CNS-WHT) cera /Hindware/Parryware make made including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 550mmx400mm (Five hundred fifty into four hundred millimetres) vitreous china wash basin of (CNS-WHT-801) Jaquar / Hindware/ Parryware make with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings of case or its equivalent flat back including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china pedestal of (Continental Series No. CNS-WHT-301 full pedestal for CNS-WHT-801) for wash basin complete recessed at the back for the reception of pipes and fittings (Cera/parryware/Hindware) within all leads and lifts as directed by the Engineer-in-Charge including entire carriage of material with in all leadsand lifts and including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink 610mmx510mm (Six hundred ten into five hundred ten milimetre) with boul depth 200 mm (Two hundred millimetre) size of approved quality (Diamond/ Prayag/Cera) ISI marked with drainage board and CP waste; and with CI or MS bracket painted white including cutting holes and making good the same but excluding of fitting including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .

Providing and fixing 32mm (Thirty two millimetres) dia of approved make CP brass waste for wash basin or sink coupling full thread with 80mm (Eighty millimetre) height No. ALD-705 Cera/parryware/Hindware make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) dia of approved make PVC waste pipe for wash basin or sink including brass check nut Cera/parryware/Hindware make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600mmx450mm (Six hundred into four hundred fifty millimetre) bevelled edge mirror ( Saint Gobind/Erotica make ) of superior glass mounted on 6mm (Six millimetre) thick Asbestos cement sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass towel rail 600mmx20mm ( six hundred into twenty millimetre) long of Jaqaur Hindware/ Parryware complete with CP brass brackets fixed to wooden plugs with CP brass screws (ACN-111SM-7711) including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600mm x120mm (Six hundred into one hundred twenty millimetre) glass shelf (Continental Series No. ACN-1171N) Jaquar/ Hindware/Parryware make approved by Engineer-in-Charge with CP brass bracket and guard rail complete fixed to wooden plugs with CP brass screws etcetra complete including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish (AQN-7731N) with CP brass brackets fixed to wooden cleats with CP brass screws etc. of Jaquar/ Hindware/Parryware make ( OPAL Series) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing nad fixing Division plate for urinals 600mmx300mm ( six hundred into three hundred millimetre) viterious china Cera/Jaquar/ Hindware/Parryware make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass bib tap (long body ) with quarter turn head 15mm (Fifteen millimetre) dia with full turn of (Continental Series -107KN) Jal,Jaquar,Hindware Make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP Brass pillar tap with quarter turn head 15mm (Fifteen millimetre) dia with full turn of (Continental Series No. CON-021KN) Jal, Jaquar,Hindware Make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass angle cock 15mm (Fifteen millimetres) dia with full turn (Continental Series No. CON-053KN) of Jaquar /Hindware/Parryware make complete including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal range of two urinal basins with 5 litres ( five litre) C.I. Automatic flushing cistern basin of 430 x 260 x 350 mm ( four hundred thirty into two hundred sixty into three hundred fifty milimetre ) and 340x430x265mm ( three hundred forty into four hundred thirty into two hundred sixty five milimetre) sizes Jaguar/Hindiware/Parryware PRS-070 make respectively with authomatic flusing cistern with fittings R.S or C.I. Brackets standard size galvansied steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I. clamps complete, inciuding painting of cistern and fittings, cutting and making good the walls floors where required in all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing toilet paper holder CP brass of Jaquar or ESSCO make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC connections pipe with brass unions 45cm (Forty five centimetres) length 15 mm (Fifteen millimetre) nominal bore heavy duty Cera/ Jaguar or hindware/parryware make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal dia brass full way valve with wheel (heavy duty) of approved Jindal/ Tata make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) nominal dia brass full way valve with wheel (heavy duty) of approved Jindal/ Tata make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore brass ball valve ( heavy duty ) Jindal/ Tata make horizontal plunger type high pressure with polythene floats including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore furrule heavy duty Jindal/ Tata make including boring and taping the main including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20 mm to 40mm (Twenty milimeter to Forty milimeter) nominal bore by providing and fixing tee including cutting and threading the pipes complete including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two coarse sand : four graded/crushed stone aggregate ) 20mm (Twenty millimetres) nominal size foundation concrete 1:4:8 ( One cement : four coarse sand : eight graded/crushed stone aggregate 40mm (Forty millimetres) nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One cement : three coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two coarse sand : four graded/crushed stone aggregate 20mm (Twenty millimetres nominal size) finished smooth complete in all respect including curing and testing Inside size 800mmx800mmx500mm (Eight hundred into eight hundred into five hundred millimetre)) deep including cast iron cover with frame (Light duty single seal : Pattern) 455mmx 610mm (Four hundred fifty five into six hundred ten millimetres) internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) with 200mm (Two hundred millimetres) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( One cement : three coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two coarse sand : four graded/crushed stone aggregate ) 20mm (Twenty millimetres) nominal size foundation concrete 1:4:8 ( One cement : four coarse sand : eight graded/crushed stone aggregate 40mm (Forty millimetres) nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One cement : three coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two coarse sand : four graded/crushed stone aggregate 20mm (Twenty millimetres nominal size) finished smooth complete in all respect including curing and testing Inside size 800mmx800mm and 1.00mtr (Eight hundred into eight hundred and one metre) deep including C.I. cover with frame (Light duty single seal : Pattern) 455mmx 610mm (Four hundred fifty five into six hundred ten millimetres) internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) with 200mm (Two hundred millimetres) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( One cement : three coarse sand) including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade ‘A’ complete with CI grating brick masonry chamber in cement mortar 1:5 (One cement : five coarse sand) and water tight C.I. cover with frame of 300 x 300mm (Three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.53kg (Four point five three kilogramme) and frame to be not less than 2.72 kg (Two point seven two kilogramme) square mouth trap 100x100mm (One hundred into one hundred millimetre) size P-Type including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore to wall, ceiling and floor galvanized mild steel tubes (Medium Grade) of Jindal/Tata Make tube fitting and clamps including making good the wall ceiling and floor upto all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) nominal bore to wall, ceiling and floor galvanized mild steel tubes (Medium Grade) of Jindal/Tata Make tube fitting and clamps including making good the wall ceiling and floor upto all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm ( one hundred millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-1536 spigot and socket soil, waste and ventilating pipes of high pressure and testing Complete including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five) nominal size S&S centrifugal cast (Spun) iron pipes(ClassLA) conferming to IS-1536 spigot and socket soil, waste and ventilating pipes of high pressure and testing Complete including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC water storage tank of Sintex make (I.S.I. marked tripple layer) 2000 (Two thousand) litre capacity with 40mm (Forty millimetre) nominal size bore galvanized mild steel scour tube with fittings 25mm (Twenty five millimetre nominal bore) galvanized mild steel overflow pipe with fittings and mosquito proof coupling of approved design 15mm (Fifteen millimetre nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all heights above ground level including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying upto 600mm ( Six hundred millimetre) dia S&S C.I. standard specials such as tees, bends,collars, tapers, caps etcetera (Heavy class) including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm(One hundred ten millimetres) dia PVC clamp Finolex/ Supreme make of approved design with steel screws and rawl plugs comlete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm ( one hundred ten milimetre ) dia Chromium Plated grating of superior quality for floor, gully or nahani trap including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Mixer for kitchen sink with casted swinging spout at top of (ESS ESS OPEL series)of approved make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing two hole basin mixing faucet of Jaquar/CZAR/Cera make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wall mixing Faucet for shower and bath hand shower with Angular and rest holder of continental Series No. CON-053KN of Jal/Jaquar /Hindware make or its equivalent with 8mm (eight millimetre) Dia 1.2 (one point two) Meter Long Flexible CP Tube and Wall Hook including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing jet spray with 1.50 mtr. ( one point five metre ) long flexible tube 8mm (eight milimetre ) dia chrom finish with wall hook complete hard shower ( Health faucet ) ALD-597 of Jaguar/Hindware/Cera and approved by Engineer-in-Charge including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .

Excavation in drain and channel etcetera in all classification of soil such as pick work, jumper work, blasting work/breaking with breaker soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Cement concrete 1:5:10 ( one cement : five sand : ten graded stone aggregate 40mm ( forty millimetre) nominal) beading for 100mm (One hundred millimetre) dia PVC pipe including form work and curing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Cement concrete 1:5:10 ( one cement : five sand : ten graded stone aggregate 40mm ( forty millimetre) nominal) beading for 150mm (One hundred fifty millimetre) dia PVC pipe including form work and curing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing solar passive heating system ISI make including all necessary fittings complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing cast iron cover with other frame for manhole cast iron cover and frame 455x610mm(Four hundred fifty five into six hundred ten millimetres) (Light duty single seal pattern-I) internal dimensions total weight of cover and frame to be not less than 23kgs(Twenty three kilogramme) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face110mm (One hundred ten millimetre) dia PVC (Finolex/Vectus) rain water pipes of working heaving pressure not less than 4.00kg/Cm² ( four point zero kilogram per centimetre square ) including filling the joints with approved adhesive complete and floors upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two coarse sand : four graded/crushed stone aggregate ) 20mm (Twenty millimetres) nominal size foundation concrete 1:4:8 ( One cement : four coarse sand : eight graded/crushed stone aggregate 40mm (Forty millimetres) nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One cement : three coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two coarse sand : four graded/crushed stone aggregate 20mm (Twenty millimetres nominal size) finished smooth complete in all respect including curing and testing Inside size 800mmx800mmx500mm (Eight hundred into eight hundred into five hundred millimetre)) deep including cast iron cover with frame (Light duty single seal : Pattern) 455mmx 610mm (Four hundred fifty five into six hundred ten millimetres) internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) with 200mm (Two hundred millimetres) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( One cement : three coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two coarse sand : four graded/crushed stone aggregate ) 20mm (Twenty millimetres) nominal size foundation concrete 1:4:8 ( One cement : four coarse sand : eight graded/crushed stone aggregate 40mm (Forty millimetres) nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One cement : three coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two coarse sand : four graded/crushed stone aggregate 20mm (Twenty millimetres nominal size) finished smooth complete in all respect including curing and testing Inside size 800mmx800mm and 1.00mtr (Eight hundred into eight hundred and one metre) deep including C.I. cover with frame (Light duty single seal : Pattern) 455mmx 610mm (Four hundred fifty five into six hundred ten millimetres) internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) with 200mm (Two hundred millimetres) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( One cement : three coarse sand) including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC plain bend 110mm (One hundred ten millimetre) dia on wall face PVC (Finolex/ supreme) accessories for rain water pipes working pressure not less than 4.00kg/Cm² ( four kilogram per centimetre square ) including filling the joints with approved adhesive complete upto all floor level/heights including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC plain shoe 110mm (One hundred ten millimetre) dia on wall face PVC (Finolex/ supreme) accessories for rain water pipes working pressure not less than 4.00kg/Cm² ( four kilogram per centimetre square ) including filling the joints with approved adhesive complete upto all floor level in all heights including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 1216 (16 mm O.D. pipe) Polyethelene-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 1216 (20 mm O.D. pipe) Polyethelene-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal dia brass full way valve with wheel (heavy duty) of approved Jindal/ Tata make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) nominal dia brass full way valve with wheel (heavy duty) of approved Jindal/ Tata make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC water storage tank of Sintex or equivalent make (I.S.I. marked five layer) 1000 (One thousand) litre capacity with 40mm (Forty millimetres) nominal size bore galvanized mild steel scour tube with fittings 25mm (Twenty five millimetres nominal bore) galvanized mild steel overflow pipe with fittings and mosquito proof coupling of approved design 15mm (Fifteen millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all heights above ground level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore brass ball valve ( heavy duty ) Jindal/ Tata make horizontal plunger type high pressure with polythene floats including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 3.00 HP (Three Horse power) H.P. Tullu Pump ( Crompton make ) with accessories complete including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete grade M-20 (M-Twenty) Design mix 20mm (twenty millimetre) graded/crushed stone aggregate for plain/reinforced concrete in levelling course in flooring complete as per drawing and technical specification clause-802, 803, 1202 and 1203 including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

20mm (twenty millimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto any floor level including arrises, internal rounded angles, chamfers, grooves and/or rounded angles not exceeding 80mm (Eight millimetres) in girth and finished even and smooth in cement mortar 1:4 ( One cement : four coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying PVC Pipe 90mm ( Ninety millimetre) dia for inlet and outlet connection pipe of Finolex /Vectus including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 90mm ( Ninety millimetre) dia PVC cowel. of Finolex /Vectus as per including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 200mm ( two hundred millimetre) cast iron Rungs with chequered or ribbed non slip surface in manhole with 200mmx200mmx100mm ( two hundred millimetre into two hundred millimetre into one hundred millimetre) cement concreete 1:3:6 ( one cement: three sand: six graded crushed stone agrregate ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm(One hundred fifty millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 4.5 kg/ square centimetre (four point five kilogram per square centemtre) comlete including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimetre) nominal size PVC single equal branch of required degree ( any radius) with oval access door, insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete PVC Finolex /Supreme/Vectus pipe working pressure not less than 4.5 kg/ square centimetre (four point five kilogram per square centemtre) confirming to IS 13592 ISI marked including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Squared Rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement :six sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with white readymixed paint (ASAIN/NEROLAC/ICI-DULUX ) complete as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

umesh sharma