ERECTION OF 01 NOS. NEW 33KV GANGA POLLUTION-JTETA BAY AT 132KV SUBSTATION KRISHNA NAGAR UNDER ETD-II KANPUR.

Amount

Erection work of following equipment/sub station structures at 132KV S/S Krishna Nagar Kanpur s/s for 33kV KCTSL bay which includes all other associated works including shifting of equipments to complete the job satisfactorily including minor fabrication if required any , as per instruction mannual or as per the directions by the supervising engineers.

Sub Station Structure (CCR/CGR/ABL/ALP etc)

Fabrication of Sub Station Auxiliary Structure (incomplete tower part provided by upptcl)

33KV CT Junction Box

33KV Line Isolator

33KV Bus Isolator

33KV Vacuum Circuit Breaker

30 kv Lightning Arrester

33kv Tripple feeder panel

Stringing of extended 33KV 3-Phase Main bus-3 & Jack bus for bus extension, the work involve stringing, fittings of associated accessories, insulator hoisting and other associated works to complete the job satisfactory.

Earthing of complete 33KV bay including equipment/gantry structure by MS Flat of different size as per site requirement. The job also includes cutting, straightening, bending laying 600mm below inside ground level of 50x6mm size MS flat earthing of various equipmemt/structure including welding with earthmat and object to earth excavation of trench its back filling, painting and all other associated work .

FRESH EARTHG,CONN W/EARTHMAT 50X6MM

FRESH EARTHG,CONN W/EARTHMAT 25X6MM

Laying of following size control cable in the trench from various equipment to J.B/Control Panel with proper dressing, saddling including fixing of cable tray as per cable schedule:-

Termination of control cable of C&R panel , ACDB, DCDB, in control room and breaker , CT , PT, isolator cubicles in switchyard including providing ferules and making of holes etc. as required .

Laying of 33 kv 400 sqmm Three phase underground power cable for connecting two adjoining Aux. bus / transfer bus by both end using cable box with clamps / lugs (clamps and lugs providing and fixing by contractor) and fixing on H type pole . (1 main and 1 sapare cable each approx 25mtr.)

Installation of LT distriution box after fabrication of stand using angles ( provided by upptcl ) at the height of 0.5mtr. The work includes, shifting ,earthing, grouting , cutting , welding, termination, making holes etc.

Laying of 3.5 core 50/95 sqmm power cable through trench from control room ACDB to newly installed LT distribution box in switchyard with proper fixing of suitable size Alluminium lugs at both end . Including cutting , drilling and cable termination .

Fixing of MCB type Junction box with the structure.

Installation of 120 w led light fitting and lightning junction box on the structure with making of clamp suitable for pipe bend .

laying and termination of 2Cx2.5 sqmm power cable (approx 300 mtr.) from LT distriution box through lighting JB to light point including making of earth trench (wherever required) and back filling of earth after completion of the work.

Supply & fixing of phase indication of 75mm circle (R,Y,B ) colour suitable for 33kv bay (for CT, CB, LI , BI etc.)

Jumpering of 33KV Bay & Extended Jack bus with Moose/Panther conductor with the help of clamps at both ends with proper cutting, measuring, straightening and associated works to comple the job satisfactorily.

supply & fixing of various name plate by min. 3mm thick sheet of size 400*250 mm with covering retroreflecting sheet suitable for 33kv bay equipments (for VCB, CT, CB, LI, BI etc.)

TRANS ENGINEEERING WORKS

Indra Enterprises