Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹24.8 L+₹1.8 L (7.85%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹25.0 L+₹2.0 L (8.70%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹25.6 L+₹2.6 L (11.5%)Rejected-Finance 00 BEHIND CHARCH NAYAGOWAN LAKHERA BEHIND RAMA MANI DAIRY KATNI MADHYA PRADESH 483501 | KATNI | MADHYA PRADESH | 483501 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹26.0 L+₹3.0 L (13.1%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | 3Krishna Enterprises L4 | M/S R.K ENTERPRISES L2 | M/s KCL Engines and Machines L1 | MNR ASSOCIATES L5 | Balaji Associate L7 | DHARMA ENGINEERS AND CONTRACTOR L3 | RAJESH ENTERPRISES L6 | S S TRADERS L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for checking, servicing,opening, adjusting, tightening of tappet cover complete by torque wrench by applying proper pressure , cleaning of complete sump from sludge of dirt, oil etc. and refitting for DG set including drain out (used) engine oil and dismantling of Fuel filter assembly and Oil filter assembly for removing of unserviceable fuel filter and oil filterNOTE (1) Cost of Spare parts required will be paid and measured separately (2) Servicing/routine check up carried out through authorised service centre (3) Make of spare recommendation by auth service centre complete all as specified and directed by Engr-in-Charge | - | - | - | - | - | - | - | - | - | - |
| 1.01 | (a) 400 to 250 KVA DG Set | 3 | Each Job | 5,500 ₹16,500 | 5,000 ₹15,000 | 6,000 ₹18,000 | 5,400 ₹16,200 | 5,000 ₹15,000 | 3,000 ₹9,000 Lowest | 5,200 ₹15,600 | 20,000 ₹60,000 |
| 1.02 | (b) 200 to125 KVA DG Set | 7 | Each Job | 4,300 ₹30,100 | 3,000 ₹21,000 Lowest | 4,000 ₹28,000 | 4,800 ₹33,600 | 4,000 ₹28,000 | 3,000 ₹21,000 Lowest | 4,100 ₹28,700 | 15,000 ₹1,05,000 |
| 1.03 | (c) 63 to 50 KVA DG set | 2 | Each Job | 3,800 ₹7,600 | 3,000 ₹6,000 | 3,500 ₹7,000 | 3,200 ₹6,400 | 1,500 ₹3,000 Lowest | 4,000 ₹8,000 | 3,600 ₹7,200 | 12,000 ₹24,000 |
| 1.04 | (d) 40 to 20 KVA DG Set | 7 | Each Job | 3,200 ₹22,400 | 2,000 ₹14,000 | 3,000 ₹21,000 | 3,200 ₹22,400 | 1,500 ₹10,500 Lowest | 5,000 ₹35,000 | 3,000 ₹21,000 | 10,000 ₹70,000 |
| 2.00 | S&F replacement of Air cleaner fileter (iiner & Outer) suitable for following capacity complete all as specified and directed by Engr-in-Charge | - | - | - | - | - | - | - | - | - | - |
| 2.01 | (a) 400 to 250 KVA DG Set | 3 | Each Job | 8,500 ₹25,500 | 500 ₹1,500 Lowest | 10,000 ₹30,000 | 8,800 ₹26,400 | 10,000 ₹30,000 | 4,500 ₹13,500 | 8,100 ₹24,300 | 4,999 ₹14,997 |
| 2.02 | (b) 200 to125 KVA DG Set | 7 | Each Job | 7,500 ₹52,500 | 500 ₹3,500 Lowest | 8,000 ₹56,000 | 6,800 ₹47,600 | 8,000 ₹56,000 | 4,000 ₹28,000 | 7,000 ₹49,000 | 4,000 ₹28,000 |
| 2.03 | (c) 63 to 50 KVA DG set | 2 | Each Job | 6,500 ₹13,000 | 500 ₹1,000 Lowest | 2,500 ₹5,000 | 5,800 ₹11,600 | 3,500 ₹7,000 | 3,500 ₹7,000 | 6,000 ₹12,000 | 3,000 ₹6,000 |
| 2.04 | (d) 40 to 20 KVA DG Set | 7 | Each Job | 5,500 ₹38,500 | 500 ₹3,500 Lowest | 2,000 ₹14,000 | 2,800 ₹19,600 | 3,000 ₹21,000 | 3,000 ₹21,000 | 5,000 ₹35,000 | 2,000 ₹14,000 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
30 Jul 2025, 9:00 amClosed
Maj Dinoop Kumar
GE (W) Agra
REPAIR/REPLACEMENT OF DG SETS ALONGWITH ALLIED WORKS UNDER AGE E/M OF GE (W) AGRA
2025_MES_718311_1
8012/1104/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Agra
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (West) Agra
₹50,000
16 Oct 2025
3 Jul 2025
31 Jul 2025
3 Jul 2025
30 Jul 2025
17 Jul 2025
Amount
M&L for checking, servicing,opening, adjusting, tightening of tappet cover complete by torque wrench by applying proper pressure , cleaning of complete sump from sludge of dirt, oil etc. and refitting for DG set including drain out (used) engine oil and dismantling of Fuel filter assembly and Oil filter assembly for removing of unserviceable fuel filter and oil filterNOTE (1) Cost of Spare parts required will be paid and measured separately (2) Servicing/routine check up carried out through authorised service centre (3) Make of spare recommendation by auth service centre complete all as specified and directed by Engr-in-Charge
(a) 400 to 250 KVA DG Set
(b) 200 to125 KVA DG Set
(c) 63 to 50 KVA DG set
(d) 40 to 20 KVA DG Set
S&F replacement of Air cleaner fileter (iiner & Outer) suitable for following capacity complete all as specified and directed by Engr-in-Charge
(a) 400 to 250 KVA DG Set
(b) 200 to125 KVA DG Set
(c) 63 to 50 KVA DG set
(d) 40 to 20 KVA DG Set
S&F in replacement of Fuel filter for following capacity of DG Set complete all as specified and directed by Engr-in-Charge
(a) 400 to 250 KVA DG Set
(b) 200 to125 KVA DG Set
(c) 63 to 50 KVA DG set
(d) 40 to 20 KVA DG Set
S&F in replacement of Fuel water seprator filter for following capacity of DG Setcomplete all as specified and directed by Engr-in-Charge
(a) 400 to 380 KVA DG Set
(b) 250 to 200 KVA DG Set
(e) 63 to 125 KVA DG Set
S&F in replacement of Oil filter for following capacity of DG Set complete all as specified and directed by Engr-in-Charge
(a) 400 to 250 KVA DG Set
(b) 200 to125 KVA DG Set
(c) 63 to 50 KVA DG set
(d) 40 to 20 KVA DG Set
S&F replacement of auotmatic voltage regulator(AVR) 24 volt complete all as specified and directed by Engr-in-Charge.
(a) 400 to 250 KVA DG Set
(b) 200 to125 KVA DG Set
(c) 63 to 50 KVA DG set
(d) 40 to 20 KVA DG Set
Repairing of self starter 24 volts DC, dismantling and repairing with replacement of bendex pinion,rewinding of armature, bushes set, rewinding of field coil assembly, reassembling and refixing including testing of the complete self starter complete all as specified and directed by Engr-in-Charge
(a) 400 to 250 KVA DG Set
(b) 200 to125 KVA DG Set
(c) 63 to 50 KVA DG set
(d) 40 to 20 KVA DG Set
M & L for changing /toping up of best quality of engine oil 15W40 type for various type/capacity DG sets including removing of old burnt engine oil from DG Sets complete all as specified and directed
Supply and fixing coolent suitable for DG Set of any capacity all as directed by Engr-in-Charge
Supply and fill batteries distilled water for the DG sets of all Dg set complete all as specified and directed by Engr-in-Charge.
Supply and fix in repair Radiator suitable for 125 KVA DG Set of Kirloskar make all as directed by Engr-in-Charge
Taking down old repairable Radiator by opening nut/bolt from foundation and loading/unloading and transportation to local market and back after repair by own arrangment. Dismantling, checking, testing for any defects and repairing as below : - Cleaning, washing the copper tubes and Top to bottom Copper Jal Frame of the radiator by acid process. Checking the leakage if any and repairing the same by doing the Soldering and Testing radiator and refixing to its old/new position including replacement of nut/bolt/washers etc and hose pipe sets with clamps and testing complete of all as specified and directed by Engr-in-Charge.following size:-
(a) 400 to 250 KVA DG Set
(b) 200 to125 KVA DG Set
(c) 63 to 50 KVA DG set
(d) 40 to 20 KVA DG Set
M & L for dismantling of defective water pump assembly and disconnecting of hose pipe connections, fanbelt, radiator connection and supply and fixing of new water pump assembly suitable for 100 to 250KVA DG set
S&F in replacement Valve solenoid (Shut down valve) for 250 KVA to 400 KVA DG sets complete all as specified and directed.
S&F in replacement Tube Lub Oil transfer for 200 KVA to 400 KVA DG sets complete all as specified and directed.
S&F in replacement Tube fuel bypass for 200 KVA to 400 KVA DG sets complete all as specified and directed.
S&F in replacement Hose flexible suitable for DG sets complete all as specified and directed.
S&F in replacement Feed pump for 20 KVA to 50 KVA DG sets complete all as specified and directed.
S&F in replacement Feed pump for 63 to 125 KVA DG sets complete all as specified and directed.
S&F in replacement Feed pump for 200 KVA TO 250 KVA DG sets complete all as specified and directed.
S&F in replacement V Belt/Fan belt DG sets complete all as specified and directed.
M & L for dismantling and replacement of Fuel pipe / Diesel Pipe for all capacities of DG set complete all as specified and directed.
M&L for taking out of turbo charger from DG set engine of capacity for 380 KVA DG SET including dismentling in to parts for repair, overhauling, calibration at test bench, testing and refixing to its original position properly complete all as specified and directed.
Supply and fixing of Kit Turbo for repair of turbo charger for 380 to 400 KVA DG set engine .
Supply and fixing of Sleeve Turbo Charger for repair of turbo charger for 380 to 400 KVA DG SET
Supply and fixing of Support Turbo Charger Seal for repair of turbo charger for 380 to 400 KVA DG SET
Supply and fixing in repair battery lead, PVC copper wire multistandard 25 Sqmm - 2m long including soldering both end with lead terminal for live & earth complete all as specified and directed
Supply and labour for cleaning installation by cutting herbs and shrubs upto 4 meter surrounding area including cleaning of Generator set, LT Panels etc of any capacity by cotton waste all as directed by Engr-in-charge
M&L for taking out of turbo charger from DG set engine of capacity for 100 to 200 KVA DG SET including dismentling in to parts for repair, overhauling, calibration at test bench, testing and refixing to its original position properly complete all as specified and directed .
Supply and fixing of Kit Turbo for repair of turbo charger for 63 to 200 KVA DG set engine .
Supply and fixing of Sleeve Turbo Charger for repair of turbo charger for 100 to 200 KVA DG SET
Supply and fixing of Support Turbo Charger Seal for repair of turbo charger for 100 to 200 KVA DG SET
M & L for repairing of canopy doors complete with replacement of door lock-04 nos,door handle-04 nos, and hinges-08 nos including denting of doors.
Supply & fixing new in replacement of CONTROLLER BASE CARD OF Cumminsas per existing make suitable upto 200 KVA DG set complete all as specified and directed.
Supply & fixing new in replacement of Remote Mount HMI 211 Display CARD suitable upto 380KVA DG Set of DG set complete all as specified and directed.
Supply & fixing new in replacement of Cummins HMI 320 PCC 3.3 Power Command Display, Part Number- 0300-6315-02 of DG set complete all as specified and directed.
Supply & fixing new in replacement of POWER COMMAND CONTROLLER CARD OF CUMMINS PCC3300 PART NO. 0327-1601-01 OF DG set complete all as specified and directed.
Supply & fixing new in replacement of Cummins Box-Control Powercom of Part Number-0319-6104 OF KVA DG set complete all as specified and directed.
Supply & fixing new in replacement of Cummins Control Assembly Card PCC 1302 of Part Number: 0327-1617-01 OF 380 KVA DG set complete all as specified and directed.
M & L for dismantling of pump governor assembly from DG set engine for Capacity 380 KVA including repair, overhauling, calibration, testing complete and refxing to its original position properly complete all as specified and directed.
Supply and fixing of Shaft governor weight carrier of pump governer assembly for 250 to 400 KVA DG SET complete all as specified and directed
Supply and fixing of Shaft governor weight carrier of pump governer assembly for 100 to 200 KVA DG SET complete all as specified and directed
Supply and fixing of Shaft governor weight carrier of pump governer assembly for 20 to 63 KVA DG SET complete all as specified and directed
M&L for disconnecting, dismantling and overhauling of fuel injector pump of DG set capacity upto 250 KVA including repair, overhauling, calibration, testing complete and refixing to its original position properly complete all as specified and directed.
Supply & fixing in replacement of Nozzle of fuel injector pump of capacity upto 250 KVA DG complete all as specified and directed
Supply & fixing in replacement of FIP Elements of fuel injector pump of capacity upto 250 KVA DG complete all as specified and directed
Supply & fixing in replacement of Delivery valve of fuel injector pump of capacity upto 250KVA DG complete all as specified and directed
M & L for repairing of Pressure Time pump complete of 200 to 380 KVA DG set with replacement unserviceable parts including machinery work complete all as specified and directed.
Supply & fixing of Drive Accessory for repairing of Pressure Time pump for upto 380 KVA DG set.
Supply & fixing of Plunger Air fuel control for repairing of Pressure Time pump for upto 380 KVA. DG set.
Supply & fixing of Oil seal for repairing of Pressure Time pump upto 380 KVA. DG set.
Supply & fixing of Gasket set fuel pump for repairing of Pressure Time pump upto 380 KVA. DG set.
M & L for dismantling of defective water pump assembly for 380 KVA to 400 KVA DG SET by disconnecting of hose pipe connections, fanbelt, radiator connection and supply and fixing of new water pump assembly suitable for all capacities of DG set complete all as specified and directed. .
Supply and fixing Battery charger 12-24V/10 A with short circuit protection, current control switch suitable for charging 2 X Battery 12 Volt upto 180Ah all as directed by Engr-in-charge
Supply and fixing Battery charger 12V/10 A with short circuit protection, current control switch suitable for charging Battery of 12 Volt upto 180Ah all as directed by Engr-in-charge
M & L for dismantling of defective water pump assembly for 63 to 100 KVA DG SET by disconnecting of hose pipe connections, fanbelt, radiator connection and supply and fixing of new water pump assembly suitable for all capacities of DG set complete all as specified and directed. .
M & L for dismantling of defective water pump assembly for 25 KVA to 50 KVA DG SET by disconnecting of hose pipe connections, fanbelt, radiator connection and supply and fixing of new water pump assembly suitable for all capacities of DG set complete all as specified and directed. .
M & L top overhauling/repairing of complete engine as dismantled with replacement of defective spare parts with new spare parts including minor repairs reassembling and testing complete all as specified and directed for 200KVA DG set (Note :- New spare parts to be replaced shall be measured and paid separately under schedule 'A' as supply only
Supply only Piston set for DG sets capacity for 200 KVA
Supply only Kit liner for DG sets capacity for 200 KVA
Supply only Piston ring set for DG sets capacity for 200 KVA
Supply only inlet valve and exhaust valve for DG sets capacity for 200 KVA DG set.
Supply only Set of 'O' rings for DG sets capacity for 200 KVA DG set.
Supply only Stem guide valve for DG sets capacity for200 KVA DG set.
Supply only Insert valve for DG sets capacity for 200 KVA DG set .
Supply only Push rod for DG sets capacity for200 KVA DG set.
Supply only Bearing connecting rod for DG sets capacity for 200 KVA DG set.
Supply only Gasket/packaging kit for DG sets capacity for 200 KVA DG set .
M&L for dismantling of alternator from 100 to 200 KVA DG set and removing out burnt exciter unIt, supply and fixing of new exciter unit with copper wire of existing gauge and quantity including tapping, varnishing, heating insulation material and testing complete all as specified and directed.
M&L for dismantling of alternator from 250 to 380 KVA DG set and removing out burnt/unserviceable field coil assembly, supply and fixing of new field coil assembly with super enamalled copper winding wire of existing gauge and quantity including supply and fixing of new slip ring and carbon brush assembly complete all as specified and directed.
M & L for scrapping out old worn out paint from DG sets capacity for 100 to 250 KVA DG Set, cleaning the surface and applying two coats of epoxy heat resistant paint (tint as approved) by spray painting including panels, Diesel tank and foundation as per manufacture's instructions complete all as specified and directed by the Engr-in-Charge.
Supply & fixing of lead acid starting power unit of capacity 12 Volts , 80 AH including filling of electrolyte, initial charging of battery etc incl making connection with self starter complete all as specified directed.
Supply & fixing of lead acid starting power unit of capacity 12 Volts , 180 AH including filling of electrolyte, initial charging of battery etc incl making connection with self starter complete all as specified directed.
Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m.
Taking out old unsv changeover and S&F off load change over switch side handle operated 415 volts 50 Hz 4 pole of rating 250 Amps mounted on angle iron frame incl PCC works completed all as specified & directed by Engr-in-Charge.
Taking out old unsv changeover and S&F off load change over switch side handle operated 415 volts 50 Hz 4 pole of rating 100 Amps mounted on angle iron frame incl PCC works completed all as specified & directed by Engr-in-Charge.
S&F, in replacement, MCCB 4 Pole, 415 V, with Microprocessor release 160 Amps with breaking capacity 36 KA with Thermal - Magnetic Release, including spreader terminals, phase barriers, complete all as specified and directed by Engr-in-Charge.
S&F, in replacement, MCCB 4 Pole, 415 V, with Microprocessor release 200 Amps with breaking capacity 36 KA with Thermal - Magnetic Release, including spreader terminals, phase barriers, complete all as specified and directed by Engr-in-Charge.
S&F, in replacement, MCCB 4 Pole, 415 V, with Microprocessor release 250 Amps with breaking capacity 36 KA with Thermal - Magnetic Release, including spreader terminals, phase barriers, complete all as specified and directed by Engr-in-Charge.
Supply and fix manual type fuel indicator gauge of exising size alongwith accessories all as directed at site
Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. Mm 3.5 core in existing cable ducts all as directed by Engr-in-Charge
Repair of hard standing of DG Set by plastering of patches and painting with two coat of distemper.
Dismantling of electrical connection of existing DG Set of capacity 100 to 250 KVA DG Set and shifted to MES Store yard or workshop for measure overhauling. .
Supply and fix in repair relay of 1-100 Amp suitable for 250 A 4 Pole contactor all as directed By Engr-in-Charge
Supply and fix in repair contactor 250 A 4 pole 240 volt for AMF Panel of Make Kirloskar cat part No KCL54 150 all as directed by engr-in-charge
Supply & fixing of lead acid power unit suitable for E-Rikshaw of capacity 12 Volts , 150 AH including filling of electrolyte, initial charging of battery etc incl making connection with self starter complete all as specified directed.
Scrubing down old paint from E rikshaw by aloxide cloth roll (amry paper) and painting with 2 coat synthetic enamel paint of colour approved by Engr-in-Charge all as directed at site
Taking down old UNSV Seat cover and supply and fixing leather seat cover of E Rikshaw all as directed by Engr-in-charge
Supply and fixing in repair break shoe of Erikshaw all as directed by Engr-in-Charge
Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed by Engineer-in-Charge.
Supplying and laying un-rainforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable.
M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as directed at site by Engr- in-Charge.
Supply and fixing in replacement GI Pipe 40mm Light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and as directed at site,.
Supply and fix in repair pressure washer 1700w motor of pressure 130 bar 3 in 1 nozzle (Rotary fan-jet, pencil jet) Detergent system,6m hose of Bosch with folding,telescopic handle.
Excavation in trenches n.exc 1.5m wide and n. exc 1.5m in depth for foundation in any type of soil.
Excavating in post holes (or similar holes) each n. exc 0.5 cum, getting out,in any type of soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and making good surface
Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 cm.
M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in fdn filling and mass concrete.
M&L PCC 1:2:4 (20mm graded aggregate) type B-1 as in foundations, post hole, filling and coping incl necessary form work complete all as specified.
M&L for brick work using sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed
M&L for rendering 15 mm thick on concrete/ brick/stone surface wall in cement mortar 1:4 finished fair and even, complete all as specified and directed.
M&L for applying two coats of cement based paint over a coat of primer on new plaster surfaces including preparation complete all as specified.
S & F for joist chennel, MS Pipe, angle, flat, or tee section as in post and strut including all necessary welding, drilling riveting, bolts etc. similar work conforming to Fe 290 Gde E-165. complete all as specified and directed.
S&F rolled section as in main and cross beams hip and angle, jack rafters, purlins, water tank stage where connected to common rafters etc incl all necessary welding, drilling riveting, bolts etc. similar work conforming to Fe 290 Gde E-165. complete all as specified and directed.
M & L for two coat of synthetic enamel paint on new steel surfaces over one coat of red oxide primer including preparation of surfaces complete all as specified and directed.
S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, washer as specified and directed by Engr in Charge.
Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in any type of soil.
Removing excavated soils exc 250 M but n exc 500 M and depositing where directed.
M&L PCC 75 mm thick (1:4:8) type D-2 using 40 mm graded aggregate sub base of chequered tiles etc.
M&L for 100mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in under floor and finished even and smooth without using extra cement incl forming contruction joint (Dummy) 100x10mm wide, in 5x5 mtr grid with filled sealing compound Grade -A
M/S R.K ENTERPRISES (BID ID -3365497)
DHARMA ENGINEERS AND CONTRACTOR (BID ID -3368105)
3Krishna Enterprises (BID ID -3365263)
MNR ASSOCIATES (BID ID -3368433)
RAJESH ENTERPRISES (BID ID -3368659)
Balaji Associate (BID ID -3368682)
S S TRADERS (BID ID -3368036)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .