Special repair to water supply installation of pump house No. 2, 3, 8 and connected items and OH pressed steel tank to SMC tank works at Vairengte under GE Silchar

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed.

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.

Dismantlig timber scantling in any position unframed work 40sqcm and over in section complete all as specified & directed.

Dismantling of asbetos cement (corrugated,semi corrugated sheeting,etc) sheets in roof coverings.

Dismantling boarding of any description fixed in any position with nails all as directed.

Taking down cement plaster on brick/concrete surfaces incl raking out joints, hacking for key scrubbing down with water complete all as directed.

M&L for PCC 1:4:8 Type D2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified & directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded aggregate as in plinth proctions and finished the surface even & smooth all as specified and directed

M&L for 75mm thick PCC(1:3:6), type C-1, using 20 mm graded aggregate and finished the surface fair and even, on sub base to floors/ paths and pavements all as specified and directed.

M & L for brickwork with subclass 'B' or locally available best quality old size bricks, straight or curved on plan exc 6 m mean raduis, built in CM (1:6} all as specified & directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed.

M & L for brickwork with subclass 'B' or locally available best quality old size bricks, straight or curved on plan exc 6 m mean raduis, built in CM (1:4) as half brick thick wall all as specified and directed.

M&L rendering of brick pillar for supporting GI/DI pipe,surface of plinth with 1:4 Cement plaster of thickness 15mm complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 mixed with integral water proofing compound, as per manufacturer's instruction, on fair faces of brickwork or concrete surfaces all as specified. Note : WPC shall be measured and paid under separate item.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) on wall surface and finishing even and fair complete all as specified and directed

Supply only integrated water proofing compound

Material and labour for 15 mm thick Screed bed or bedding layer of Cement mortar (1:6) for laying floor finishes complete all as specified and directed

M&L for non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified

M & L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry (with white cement and pigment ) in floors complete all as specified and directed

Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-240 complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces complete all as specified & directed.

Material and Labour for applying two coats of oil bound distemper over one coat of primer on walls including preperation of new/old or previously untreated surfaces complete all as specified & directed.

M&L for two coats synthetic enamel paint over a coat of red oxide on new iron surfaces of any description not otherwise described over 10 cm including preparation of new or previously untreated surface all as specified & directed.

M & L for applying two coats of synthetic enamel paint over one coat of pink primer including preparation of new or previously untreated wood and wood based surfaces Surfaces of any description, not otherwise described, over 10cm width or girth

Supply and fix second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints all as specified and directed.

S & F 35 mm thick Second class Hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

Supply and fix 30mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats

Supply and fix 100mm size Butt hinges, medium weight, cold rolled mild steel.

Supply and fix 150mm size aluminium anodised, barrel tower bolts of extruded section.

Supply and fix 150mm size aluminium handles, cast type, anodised.

Supply and fix 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified

Supply and fix 75mm size Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed by Engr-in-Charge

Supply and fix 100mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge

Supply and fix 100mm size aluminium handles, cast type, anodised complete all as specified and directed by Engr-in-Charge

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge

Dismantling of old rusted pressed steel tank of capacity of 12KL complete all as specified and directed byEngr-in-Charge

Supply,hoisting,installing and connecting pre fabricated HOT press Moulded sheet,sheet moulding compound (SMC) panel tank in size of 4mx3mx2m having capacity 24KL on existing structure , capacity laid over sintex prefabricated HDG grillage (Hot deep galvanized) channels and SMC panel tank consisting with closed topical nipple for inlet,outlet ,overflow and washout connection confirming it IS-12701-96 including external FRP ladder for clambing for cleaning also fixing PTMT 100mm dia ball including all fittings also RCC plith/beam for around the stagging and drainout for overflow and darinout water all as per specification anddirected by Engr-in-Charge Make:Sintex Note:- The contractor shall be provide the load bearing report of existing iron frame structure from any recoginized/Govt approved antionalised institue before installation of New tank on it and the cost for the same will be born by the Contractor

Material,labour,erection and fabrication for rolled MS Joint,Channel,angle or tee section fixed indepenently without connecting plates etc (cut to ordianry length i.e within 20mm of length indicated) confirming to FE-410W (gde-E-250 quality-B) complete all as per site requirment specified and directed by Engr-in-Charge

Supply ,installing and testing cast iron sluice valve,class PN 1.6, ISI marked conforming to IS- 14846 complete suitable for 80 bore pipe with flanged ends duly drilled, brass spindle, CI gate with brass rings and iron wheel head , including taking out and disposing off old unsv sluice valves complete all as specified and as directed.

Supply & fix butterfly valve (water Type), PN- 1.6 with S.S-304 Disc,Body S.G. Iron,lever operated,Nitrile/EPDM Rubber lining. of size 50 mm suitable for inlet and outlet GI pipe of filtration plant including taking out old unserviceable butterfly valves complete all as specified and directed.Make: ZOLOTO/KIRLOSKER

S& F Gun metal globe or gate valves with iron wheel,head screwed both ends for iron pipe and fixed bore of pipe 50 mm dia including taking out and disposing off old unsv gate valves complete all as specified and as directed.

S& F Gun metal globe or gate valves with iron wheel,head screwed both ends for iron pipe and fixed bore of pipe 20 mm dia including taking out and disposing off old unsv gate valves complete all as specified and as directed.

Supply and Fix CI body Foot valve ISI mark conform to IS 4038 of Size 50mm dia including taking out old unsv foot valve.complete all as specified and as directed.

Material and labour for fixing MS cover for 750mm X 750mm valve pit fabricated and made out of not less than 3mm thick MS sheet fixed in location hinges welded, with locking arrangements including angle iron frame of 50x50x5mm, grouted with PCC (1:2:4) and with one coat of primer and two coats of synthetic enamel paint all as directed and specified by Engineer-in-Charge.

M & L for in replacement of Water level indicator fixed at various location with the following materials: - (a) Angle iron ISA 40x40, 3mm thick - 7.0RM (b) MS plate 3mm thick 10 cm wide - 3.0mtr (c) Nylon rope 5mm dia with MS pully - 15.0mtr (d) PVC float ball 150mm dia - 1 no (e) PCC 1:3:6 20mm grade aggregate-0.5cum (f) Painting two coats of black paint over a coat of red oxide and marking the water level as per the UG sump capacity all as directed by engr-in-charge (g) Arrow shaped weight marker for water level indicator fabricated from 100x10mm thick MS flat of length 100 mm duly painted with two coats of white colour sythetic emabmel paint over a top of rex oxide primer.

M&L constrcution of brick pillar by Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1.6 cement mortar for supporting hanging GI/DI pipe line complete all as specified and directed.

Supply and fix water pressure guage 7 Kgx100 mm dia in replacement for existing place complete allas directed at site. Make Ramco or equivalent in Zolota Kirlosker

Supply and fix flat submersible cable for pump motor of size 3 core 4 sq mm connected with suitable size of copper lugs complete all as specified and directed by Engineer-in-Charge.

S/F flexible PVC helical pipe 20mm dia complete all as specified and directed by Engr-in-charge.

S&F in replacement Monoblock pump set 7.5HP 3 phase 415V 50Hz Centrifugal Pump set 30mtr head outlet 50x50 with heavy duty as per specified as per directed by Engr-in charge (one standby) Note:-Taking down Pump motor deposit at AGE vairengte E/M store

Materials and labour for fabrication,supply and errection of bakelite flex display boards made out of MS square pipe frame of as per requirment of site size cover all 4 sides covered with powder coated CRCA sheet & back side covered by galvanised sheet of 24 guage,back side supporting by MS chanel in crossing . Front open box type with front side covered by flex board bakelite with digital printed letters and figures as requred The board shall be cubical type with screw fittings for opening and closing front side for maintenances. using MS channel for beading including inside electrical wiring comlete with LED T/L Fitting 20 Watt as directed with starter, electronic ballast switches and necessary fixing arrangement, Size of the board upto 13 feet X4 feet X 12 inches with 4 Nos LED light as per the site requirement on roof, wall etc all fixing on height upto 20 feet arragement by the contractor with suitable tool and plant as per required to fix on mention height as directed by Engr-in - Charge.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos, 8 mm dia 25 mm long hex head screw complete as specified as dirtected

Supply and fix LT Indoor End termination joint type of size 16 sqmm to 35 Sqmm 3.5 core suitable for PVC / XLPE power cables complete. Make : Dension/MS-Seal/Fontech.

M&L for Boring under road and foot path for inserting 50mm bore GI tubing for water line pass through under roard without any damage complete all as per specified and directed by Engr-in-Charge NOTE- GI Pipe to be paid separate in respective items .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, lamp holder and conduit etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by EIC. Note:- The damaged surfaces to be made good with plastering & applying colour wash in required coats to matching with existing surfaces as directed by Engineer-in-charge. Cost of the same deem to be included in quoted rates and nothing extra on this account admissible.

M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLS copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for One light point controlled by one switch.

M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLS copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for One fan/ exhaust fan point controlled by one switch.

M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLS copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for One switch socket out let point 5 Amps on independent board

M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLS copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for One switch socket out let point 5 Amps on same board

M&L for point wiring with two single core 4.0 Sq.mm size multistranded FRLS copper conductor PVC insulated cables and one single core 4.0 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for for one 3 pin 15 Amp switch socket outlet

Supply and fixing switch piano flush type 5 Amp single pole, one way Complete all as specified and as directed

Supply and fixing for ceiling rose surface bakelite 65 x 50 mm three terminal Complete all as specified and as directed

Supply and fixing socket outlet 5 pin 5 Amps, flush type Complete all as specified and as directed

Supply and fixing Socket outlet combination 2 in 1 3 pin 6 and 16 amp flush type universal Complete all as specified and as directed

Supply and fixing Socket outlet combination 2 in 1 3 pin 6 flush type universal Complete all as specified and as directed

Supply and fixing powder coated sheet metal enclosures DB, double door, single pole and neutral 8 way 240 Volt fitted with bus bar, DIN channel, neutral link and incoming contact Complete all as specified and as directed

Supply and fixing MCB SPN 6-32 Amps 240 volts Complete all as specified and as directed.

Supply and fixing MCB SP 6 Amps to 32 Amps 230 Volt Complete all as specified and as directed

S&F surface mounting batten tube light fitting, integrated polycarbonate LED channel with white acrylic cover complete suitable for and including lamp LED 1x20 Watt,(4 feet) fixed properly on wall surface and connecting complete from ceilling rose to fitting by three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit all as directed.

S&F building security light LED fitting 25/35 watt 230V AC outdoor type with high pressure die cast aluminum housing and heat resistant , epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 25/35 watt, fixed / connect properly at directed location on building with IP 65/66 protection complete

Supply and fixing bracket for street light fittings of any size made out of GI pipe medium grade 25/32 mm dia 1.25 mtr length bend to required size and shape including provision of clamps and fittings in position and two coat of aluminum paint over a coat of red oxide primer all as specified and directed including taking down old bracket.

Taking down old fan and S&F Ceiling fan 1200mm sweep single phase 230 volts AC, min air delivery 210 CFM with service valve 6.00 BEE 5 star rating with brushless direct current motor (BLDC) with blade ,down roads electronic regulator and complete accessories complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 2.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr all as reqd and as directed by Engr-in-Charge.Note:- Taking down Old Ceiling fan deposit to AGE Vairengte E/M Store (not in Schedule of Credit)

Taking down old fan and S&F for Plastic body Exhaust Fan 250 mm sweep, single phase 230 volts AC, 900 RPM four blade with louver shutters complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 1.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr all as reqd and as directed by Engr-in-Charge.

Supply laying and fixing Steel Tubes, 'Medium grade', 80 mm dia galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange incl welding etc.); laid in trenches all as specified and directed.

Supply laying and fixing Steel Tubes, 'Medium grade', 50 mm dia galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange incl welding etc.); laid in trenches all as specified and directed.

Supply laying and fixing tubes, 25mm medium grade, galvanised iron water tubes with screwed socket joint together with and including all GI fittings connection on waal or floor with clamps digging etc as per site requirement as per Engr-in-Charge

Supply laying and fixing Steel Tubes, 'Medium grade', 20 mm dia galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange incl welding etc.); laid in trenches all as specified and directed.

Cutting existing 100 mm bore steel tubing for alterations or additions (Each cut measured) complete all as specified.

Material and labour for GI/MS flange 6mm thick suitable for 50 mm dia GI pipe and welding in existing GI tube at sitecomplete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells,cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense, laying of HT/LT UG cables soil complete all as specified and as directed

Returning,filling in including spreading ,levelling ,watering and well ramming in layers not exc 25 cm all as specified and as directed

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge

Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly. complete all as specified and directed by Engr-in-Charge

M & L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed by Engr-in-Charge

Supply, laying connecting testing XLPE/PVC sheathed, armored LT electric power Cable (heavy duty) with stranded aluminium conductor of size 50 Sqmm, 3.5 core 1100Volt grade laid throught duct /pipe / trench etc incl cable gland and lugs complete all as specified and directed by Engr-in-charge.

Supply ,laying and testing in trenches or fixing on wall or passing through pipe 1100 volts grade heavy duty cable XLPE Insulated multi stranded aluminium conductor cross sectional area 10 sqmm 2 core served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and over PVC sheathed complete as per specification properly clamps on wall and connection at end point with all legs ,glands etc complete all as specified and directed by Engr-in-charge.

M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 25 mm X 4 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c with one handle for lifting made out of 8 mm dia bar or CI Cover, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed by the Engineer-in-charge.

M & L for building earthing complete with galvanised steel earth plate electrode 60 x 60x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron wire 4mm as earthing lead as shown in Electrical Plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in hard/dence soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI medium grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate No 3 of SSR Part I 2009 all as directed by Engr-in-Charge

Dismantling of unserviceable LT Panel of any type/size and removal from site. and Supply, Installing,testing and commissioning of LT Panel factory made Indoor type (CPRI) as per latest IS mark with following minimum thickness - Load bearing member/Doors - 3mm, Non-load bearing member/internal partitions - 3mm, Glandplate/Base channel-3MM , board floor mounted, dust and vermin proof, 3 phase 4 wire with rated operational voltage 415V, rated insulation voltage of 1000V and Impulse withstand of 12kV and minimum internal Arc with-stand of 65kA, 500mSec as per latest IS mark, weather proof, with separate hinge door for each compartment with Operating handle & locking arrangement with back door common openable(screwed/Lockable), grouted in PCC 1:2:4 Complete. Painting as per defined 7 Tank process with epoxy powder polymerized at high temperature and aluminium busbar (TPN) suitable for 250A with double compression aluminium cable glands with the following accessories with latest IP rating :- (a) Incoming - MCCB 125 Amp 4 pole 415 V 16 kA rating (b) Outgoing - (i) MCCB 63 Amp 3 Pole 415V 16 kA - 02 Nos (II) MCB 16 Amp double Pole 230V 10kA - 01 Nos . (III) 7.5 HP DOL starter - 02Nos (IV) Changeover 125Amps-01 Nos (V)Spare compartment for MCB - 01 nos . (VI) LED indicating lamps for main supply (R-Y-B) (vII) Amp meter (vIII) Volt meter (IX) Start/stop push button-02 Set