Loading
Loading…
Loading…
Tender Value
₹2.2 Cr
EMD Value
₹4.4 L
Closing Date
29 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ENGG1
2 conditions · 2 needing a document upload
As per Tender Document.
As per Tender Document.
7 conditions · 2 needing a document upload
As per Tender Document.
As per Tender Document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Construction, Rectification, Replacement and Maintenance of ROB Components including Misc. Associated Works under the jurisdiction of GM/Co-ord./Jaipur.
JPEN-ROB-MAINT-2025-10-R2
JPEN-ROB-MAINT-2025-10-R2
Open
Works - General
6 Months
Jaipur, Rajasthan
₹11,800
₹4.4 L
29 Jul 2026
8 Jul 2026
15 Jul 2026
32 items across 4 schedules · ₹2,33,84,757.24 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 41080 - Supplying, Fabricating and fixing access ladders, inspection platforms, Trolley refuges etc., on bridges with structural steel conforming to IS:2062 including welding / bolting, priming painting with one coat of ready mixed paint of Zinc Chromate (IS:104) with DFT of 25-30 microns followed by one coat of Zinc Chrome Red Oxide (IS:2074) with DFT of 25 microns with all material, labour, T&P as a complete job. Note: Painting shall be paid separately under relevant item. | MT | 105.00 | 1,17,253.89 | 1,23,11,658.45 |
| 2 | 41020 - Supplying and fixing HSFG bolts of any dia and any length with suitable nuts including DTI washers conforming to IRS-B1-2001 for bridges and steel structures with contractors labour, tools and plants and lead and lift etc., complete. | Kg | 1000.00 | 180.45 | 1,80,450 |
| 3 | 41220/41221 - Surface preparation of steel work of bridge plate/composite girders by cleaning with scrappers and/or wire brushes to remove all rust and loose or perished paint to prepare perfectly clean & dry bare metal surface free from all dirt/foreign material & ready for initial coat of paint for new or existing steel girders. Rate includes cost of labour, consumables, brushes, tools & plants, ladders, scaffoldings, jhoola, hanging scaffolding staging etc. / Existing girders with old paints | Sqm | 16497.00 | 54.17 | 8,93,642.49 |
| 4 | 41260/41263 - Painting of cleaned plate/composite bridge girders including all scaffolding along with provision of Jhoola / hanging scaffolding ladders etc. where required. / With two coats of Aluminium paint in dual containers conforming to IS:2339 with DFT of 15 - 20 Microns for each coat | Sqm | 16497.00 | 94.03 | 15,51,212.91 |
| 5 | 41280 - Extra for working under traffic conditions over items 041220 to 041274 (A) Extra for working under traffic conditions over items no 041221 of 041220 | Sqm | 16497.00 | 5.42 | 89,413.74 |
| 6 | 41280 - Extra for working under traffic conditions over items 041220 to 041274 (C) Extra for working under traffic conditions over items no 041263 of 014260 | Sqm | 16497.00 | 9.4 | 1,55,071.8 |
| 7 | 52100 - Applying pre-packed cement- based polymer mortar of strength 45Mpa (28days) for replacement of spalled concrete with average thickness of 10mm as per manufacturer's specification and approved procedure. | Sqm | 500.00 | 590.82 | 2,95,410 |
| 8 | 41120/41121 - Design, supply, fitting and fixing in position true to line and level POT- PTFE bearing of 300MT Capacity, consisting of a metal piston supported by a disc or un reinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel / fabricated structural steel, metal and elastomer elements complete as per IS:2062, IS:1030, AISI:304, AISI:316, IS:6911, BS:3784, IS:3400, IS:226, BS-5400, Bridge Code and as per approved drawing and Technical Specifications. The design of the bearings shall be submitted by the manufacturers / contractor and got approved from Railway before fixing. Test report after inspection of the bearings shall be submitted and got approved before the materials are lifted from the manufacturer premises. / POT-cum -PTFE Bearing (Free end) Each | Each | 5.00 | 1,33,845.21 | 6,69,226.05 |
| 9 | 41122 - POT Bearing-Fixed Type Each | Each | 5.00 | 1,39,514.16 | 6,97,570.8 |
| 10 | 41123 - POT-cum -PTFE Guided (L) Bearing Each | Each | 5.00 | 1,56,249.43 | 7,81,247.15 |
| 11 | 41124 - POT-cum -PTFE Guided (T) Bearing Each | Each | 5.00 | 1,55,303.7 | 7,76,518.5 |
| 12 | Any other USSOR 2021 items | Lumpsum | 1.00 | 5,00,000 | 5,00,000 |
| Schedule total | ₹1,89,01,421.89 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document R2
ATTACHMENT
JPEN-ROB-MAINT-2025-10-R2.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .