Repair to plastering of walls plinth protection repair to veramdah flooring plastering and other associated B/R work at Sewar fort under GE Bharatpur

Amount

M&L for rendering 15 mm thick in CM (1:6) on stone masonry surfaces or other fair surface of brick-work or on one side of lathing upto 10 m height ,finished fair & even Including taking down cement plaster of any description etc including racking out joints,hacking for key, scrubbing down with water complete all as specified

All as above item no 1 but in CM (1:4) finished even and smooth on fair faces without using extra cement complete all as specified

M&L for Rendering 15 mm thick in CM (1:6) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified

Ditto as above item no 3 but in CM (1:4) finished even and smooth without using extra cement on fair faces of brick work complete all as specified

M & L Preparation of new plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of wall primer akali resistant priming paint with hand roller complete all as specified

M&L for three coats of white wash on new plastered or unplastered surfaces of walls including prepration of surfaces complete all as specified

M&L for preparation of New plastered surfaces and applying two coats of exterior emulsion paint (weather proof anti algae) 100% acrylic emulsion paint over a coat of EXTERIOR WALL PRIMER complete all as specified

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified

Taking down shutter of any description area exc 1 sqm and n. exc 2 sqm complete all as specified

Rescuring without taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) Complete all as specified

S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheeet reinforced with m.s. squre tube complete all as specified

Supplying & fixing in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and shown in SSR 2020 (Part-II)

S&F 35 mm thick 2nd class hardwood factory made plain framed, panelled shutters (any No. of panels) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces rail & stiles as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified

M&L for rolled mild steel framed work such as grill grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors , laddres, door gate frame, framed baliusters, walk ways, railing , frame work of water tank and similar work conforming to Fe-290, Gde-E-165 complete all as specified

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position.

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified

S&F 150 mm long mild steel barrel tower bolts stove enameled black with bright bolt (ISI marked) complete all as specified

Mild steel pressed steel bow handle oval type stove enameled black of size 150 mm (ISI marked) complete all as specified

S&F MS sliding door bolt, plate type, 300mm long, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, 4 on bolt plate and 2 on staple plate and fixed complete all as specified

S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked complete all as specified

S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed complete all as specified.

S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified

M&L dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified

M&L Glazed ceramic Tiles,in verticle surface 350X250X7mm/ 450X300X7mm set & jointed in neat cement slurry and pointed in white or colour cement to match the existing surface over and including 15mm thick rendering in CM 1:4 complete all as specified

M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick in floor (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in coloured cement over & including 15mm thick screed bed in CM 1:4 complete all as specified

M & L for Endura Designer Collection Series of Jhonson Tiles ,Kajaria or somani tile of size 400x400x10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified

M & L for Endura Designer Collection Series of Jhonson Tiles ,Kajaria or somani tile of size 300X300X10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified

Demolition of cement concrete (unreinforced) in ground floor and paving,plinth protection n.exc 15 CM thickness (below or above GL) complete all as specified

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (12.5 mm graded aggregate) as in sub-base of florring complete all as specified.

M&L Non - skid Ceramic colored tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over and including cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Machine cut kota stone slab 12-15 mm thick in riser of steps, skirting, dedo and pillar laid over over and including cement screed 15 mm thick in cement mortar 1:4, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for PCC 1:3:6 type C-1 ( 20 mm graded aggregate) as in plinth protection , 50 mm thick complete all as specified

taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore

20 mm bore

S&F in repair for Corner Glass Shelf (with Bracket Complete all as specified .

S&F in repair Glass Shelf 550mm long complete all as specified

S&F in repair 25mm dia S.S Pipe curtain Rod with nickel plated brackets & Decorative end cap complete all as specified

S&F in repair stainless steel kitchen plate rack made of 1mm thick SS Steel of size 24"X26"X10" fixed with nails/screw on wall complete all as specified

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin jambs pillars etc complete all as specified

M&L Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified

S&F in repair for PVC wall panelling with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angel fixed with solvent cement complete all as specified

Dismantling stone slabs in roofs, suspended floors, chajjas, landings,lintel band etc., any thickness, jointed in any mortar complete all as specified

M&L for sand stone slabs 7.5 cm thick in sun shades, lintel stone , shelves, cills, landings, cover stones, templates, etc. n. exc. 3 m in length, punched dressed on face and along exposed edges, self faced on other side and set in lime mortar 1:2 or cement mortar 1:4 complete all as specified

Demolition and breaking up drain pipes (SGSW, AC or reinforced cement) set in cement mortor internal dia of pipe upto 110mm dia complete all as specified

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified

Dismantling corrugated or semi corrugated Asbestos cement sheets in roof coverings complete all as specified

M & L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified

S&F in repair vitreous china wash hand basin with pedestal, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets & pedestal , cutting for and pinning in ends of brackets or erecting stand complete all as specified

S&F pillar tap, cast copper alloy with capstan heads,chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified

Dismantling of old U/S grating of any description or size and S&F MS chromium plated grating 100mm dia of weight not less than 50gm for floor trap / Nahani trap complete all as specified

Supply and fixing in repair anodized snap grid frame work of size 605mm x 605 mm for false ceiling including necessary notching. The snap grid shall consist of anodized aluminium main & cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/RM and 23.5 x 26.4 x 1.40 mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminum angle bracket of size 15mm x 15mm x 1.5 mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminum angle of size 40 x 25 x 2 mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 12 mm thick mineral fibre board of make Armstrong in fixed in grid support with 6.0 mm dia plain mild steel wire galvanised class 3 fixed in detached works etc to support snap grid, made of aluminum as per specification complete all as specified

GANGA CONSTRUCTION (BID ID -3163117)

PD GUPTA AND COMPANY (BID ID -3156446)

M/S MAMTA CONSTRUCTIONS (BID ID -3157541)

Captainkomalchaharconstructions (BID ID -3163716)

M/s Ranaji Construction Co (BID ID -3163486)

M/s S. K. Construction Co. (BID ID -3163116)

GOVIND CONSTRUCTION (BID ID -3158087)

M/s K Prashad and Sons (BID ID -3163655)