Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.0 CrAdmitted-Finance 16 JAIN NAGAR TALAB TILLO JAMMU JAMMU KASHMIR 180002 | JAMMU | JAMMU AND KASHMIR | 180002 | ₹1.0 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.1 Cr+₹8 L (7.63%)Admitted-Finance JABALPUR | ₹1.1 Cr+₹8 L (7.63%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical CONDITIONS OF TECHANICAL BIDS NOT FULFILLED |
| 4 | Rejected-Technical | - | - | Rejected-Technical conditions of techanical bids not fulfilled |
| Sl No | Description | Qty | Unit | AVG Contracts and Supplies pvt ltd L1 | UDAIRAJ INFRA POWER PRIVATE LIMITED L2 |
|---|---|---|---|---|---|
| 1.00PALMAR LIFT STAGE-1ST | |||||
| 1.10 | Providing, installation, testing and commissioning of 8000 GPH x 340 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block of size 6’x3’x4’ (or as per pump-motor base frame dimensions) by using reinforcement steel of 12 mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. Providing, fabrication and laying of 150 mm dia. MS suction pipe line to the pump set of length as per site conditions and upto maximum of approximately 6 meters each including 150 mm dia. MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 150 mm dia. Cast Iron sluice valve-1no. (PN rating 1.0), gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 100 mm dia. MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice valve 100 mm dia. and NRV 100 mm dia. alongwith by pass arrangement (class 300 accompanied with manufacturer’s in house test certificate) gaskets, nuts, bolts, washers. Job includes greasing work, P/F of graphited gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing / fitting and laying of copper cable 70 mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 95 mm2 copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length alongwith neutral wire conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 400 ampere MCCB of 50KA breaking strength. Proper chemical earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc. | 2 | Jobs | 10,50,847.45 ₹24,80,000 | 9,00,000 ₹18,00,000 Lowest |
| 1.20 | Making connection of Sump outlet pipe with suction lines through 200 mm dia. MS pipe manifold, Making connection of delivery lines with rising main through 150 mm dia. MS pipe manifold including painting work. Job includes providing / fitting of 100 mm dia. cast steel NRV (class 300) at distance of 500 meters from stage-1st. Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house. Job includes providing of welding set-1no., maintenance tool kit as per enclosed annexure and providing of chain pulley block (1no.) 5 ton alongwith tripod stand. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc. | 1 | Job | 1,14,406.78 ₹1,35,000 Lowest | 3,50,000 ₹3,50,000 |
| 1.30 | Providing and fitting of overhead MS girder/ pipe structure of required size so as to sustain the load of material / equipment / machinery while lifting / shifting of the material / equipments / machinery. | 1 | Job | 80,508.48 ₹95,000 Lowest | 2,20,000 ₹2,20,000 |
| 1.40 | Design, fabrication, installation, testing and commissioning of 185 ampere rating, 3 phase, LT control panel cum protection panel cum automatic star delta starter alongwith allied works by way of fabrication of panel with 3 pole Main and delta power contactors of 185A rating 01 no. each and star power contactor of 110A rating-1no., and MCCB 250 Ampere, complete with all protection, safety and control devices / mechanism compatible with the design / rating of the prime mover, of reputed make, conforming to ISI standards. The system should be provided with fault analyzer cum controller unit or equivalent of standard and reputed make. The complete system should be enclosed in MS steel enclosure box of suitable dimensions. The enclosure should be finished with powder coated painting from inside as well as from outer surface of approved colour. Providing / laying of copper conductors of proper rating alongwith insulation material as per site requirement. The enclosure should be front shutter mounted with key locking system having glass window. Digital electronic voltmeter & ampere meter should be provided along with the required current transformer and selector switches. The internal control wiring should be done with flexible PVC LT cable with proper thimbling at each end. The system should trip the motor on power failure and on appearance of an electrical fault mentioned below which may otherwise damage the motor field coils and should not restart automatically until unless the system is reset manually, thus providing automation to the system and protection to the motor .The system / star delta auto starter should not fall into delta if it does not fall into star mode first and should remain de-energised to avoid damage to the motor / machinery and also to the power source / transformer. The system / star delta auto starter should trip off if it does not fall into delta & remains in star mode for more than 10-20 seconds. The system shall provide protection against:-Low voltage below 350 V, High Voltage above 450 V, Single phasing, Reverse phasing, Un Balanced phasing, Dry running, Overloading. In addition the system should have the following audio & visual features for a quick and accurate diagnosis of the appeared fault / status for a speedy rectification of the system-- Separate LED fault / status indicators, LED phase indicators. Isolation by pass system, for fault analysis of system, with a blinking indicator. An audio warning system/Siren which activates only on starter failure to trip the motor on appearance of any electrical fault mentioned above, to warn the operator to switch off the motor manually.3 LED, contactor ‘COIL OK’, indicators, one for each of the contactors / coils. LED star & delta indicators to access the star to delta timing. A tamper proof starting system to avoid manipulations by the motor operator to keep the system in a permanently ON position Testing of panel after making all incoming / outgoing connections on no load and then on full load. Proper chemical earthing of equipment should be done. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc, | 2 | Jobs | 2,45,762.71 ₹5,80,000 Lowest | 5,00,000 ₹10,00,000 |
| 1.50 | Providing, carriage, installation, testing and commissioning of 3 phase, 150 KVA Voltage Stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 12 gauge container chamber alongwith allied works. Job includes providing of 150 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of single core armoured Al. cable of 185 mm2 from electric pole to 400 ampere main switch in four leads approximately 50 meters length of each lead and further Providing and fitting of 95 mm2 copper cable from 400 ampere main switch to voltage stabilizer approximately 20 meters in length complete with insulation and thimbling. The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper chemical earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc. | 1 | Job | 5,93,220.34 ₹7,00,000 Lowest | 7,00,000 ₹7,00,000 Lowest |
| 2.00PALMAR LIFT STAGE-2ND | |||||
| 2.10 | Providing, installation, testing and commissioning of 8000 GPH x 300 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block of size 6’x3’x4’ (or as per pump-motor base frame dimensions) by using reinforcement steel of 12 mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. Providing, fabrication and laying of 150 mm dia. MS suction pipe line to the pump set of length as per site conditions and upto maximum of approximately 6 meters each including 150 mm dia. MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 150 mm dia. Cast Iron sluice valve-1no. (PN rating 1.0), gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 100 mm dia. MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice valve 100 mm dia. and NRV 100 mm dia. alongwith by pass arrangement (class 300 accompanied with manufacturer’s in house test certificate) gaskets, nuts, bolts, washers. Job includes greasing work, P/F of graphited gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing / fitting and laying of copper cable 70 mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 95 mm2 copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length alongwith neutral wire conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 400 ampere MCCB of 50KA breaking strength. Proper chemical earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc. | 2 | Jobs | 9,74,576.27 ₹23,00,000 | 8,50,000 ₹17,00,000 Lowest |
| 2.20 | Making connection of Sump outlet pipe with suction lines through 200 mm dia. MS pipe manifold, Making connection of delivery lines with rising main through 150 mm dia. MS pipe manifold including painting work. Job includes providing / fitting of 100 mm dia. cast steel NRV (class 300) at distance of 500 meters from stage-2nd. Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house. Job further includes providing of maintenance tool kit as per enclosed annexure. and providing of chain pulley block (1no.) 5 ton alongwith tripod stand. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc. | 1 | Job | 1,14,406.78 ₹1,35,000 Lowest | 3,50,000 ₹3,50,000 |
| 2.30 | Providing and fitting of overhead MS girder/ pipe of required size so as to sustain the load of material / equipment / machinery while lifting / shifting of the material / equipments / machinery. | 1 | Jobs | 80,508.48 ₹95,000 Lowest | 2,20,000 ₹2,20,000 |
Tender Value
₹1.1 Cr
EMD Value
₹2.3 L
Closing Date
27 Jan 2024, 3:00 pmClosed
XEN JAL SHAKTI PHE MECHANICAL DIVISION UDHAMPUR
UDHAMPUR
Providing, installation, testing and commissioning of electro-mechanical machinery alongwith allied works at Palmar Lift
2024_PHE_242261_2
ENIT NO. 76-JJM OF 2023-24
Open Tender
Repair and Maintenance Works
Item Rate
120 days
XEN JAL SHAKTI PHE MECHANICAL DIVISION UDHAMPUR
Providing, installation, testing and commissioning of electro-mechanical machinery alongwith allied works at Palmar Lift
8 documents required · 8 mandatory
₹500
XEN JAL SHAKTI PHE MECHANICAL DIVISION UDHAMPUR
₹2.3 L
Yes
16 Mar 2024
6 Jan 2024
29 Jan 2024
6 Jan 2024
27 Jan 2024
6 Jan 2024
Amount
PALMAR LIFT STAGE-1ST
Providing, installation, testing and commissioning of 8000 GPH x 340 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block of size 6’x3’x4’ (or as per pump-motor base frame dimensions) by using reinforcement steel of 12 mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. Providing, fabrication and laying of 150 mm dia. MS suction pipe line to the pump set of length as per site conditions and upto maximum of approximately 6 meters each including 150 mm dia. MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 150 mm dia. Cast Iron sluice valve-1no. (PN rating 1.0), gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 100 mm dia. MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice valve 100 mm dia. and NRV 100 mm dia. alongwith by pass arrangement (class 300 accompanied with manufacturer’s in house test certificate) gaskets, nuts, bolts, washers. Job includes greasing work, P/F of graphited gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing / fitting and laying of copper cable 70 mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 95 mm2 copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length alongwith neutral wire conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 400 ampere MCCB of 50KA breaking strength. Proper chemical earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc.
Making connection of Sump outlet pipe with suction lines through 200 mm dia. MS pipe manifold, Making connection of delivery lines with rising main through 150 mm dia. MS pipe manifold including painting work. Job includes providing / fitting of 100 mm dia. cast steel NRV (class 300) at distance of 500 meters from stage-1st. Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house. Job includes providing of welding set-1no., maintenance tool kit as per enclosed annexure and providing of chain pulley block (1no.) 5 ton alongwith tripod stand. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc.
Providing and fitting of overhead MS girder/ pipe structure of required size so as to sustain the load of material / equipment / machinery while lifting / shifting of the material / equipments / machinery.
Providing, carriage, installation, testing and commissioning of 3 phase, 150 KVA Voltage Stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 12 gauge container chamber alongwith allied works. Job includes providing of 150 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of single core armoured Al. cable of 185 mm2 from electric pole to 400 ampere main switch in four leads approximately 50 meters length of each lead and further Providing and fitting of 95 mm2 copper cable from 400 ampere main switch to voltage stabilizer approximately 20 meters in length complete with insulation and thimbling. The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper chemical earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc.
PALMAR LIFT STAGE-2ND
Providing, installation, testing and commissioning of 8000 GPH x 300 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block of size 6’x3’x4’ (or as per pump-motor base frame dimensions) by using reinforcement steel of 12 mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. Providing, fabrication and laying of 150 mm dia. MS suction pipe line to the pump set of length as per site conditions and upto maximum of approximately 6 meters each including 150 mm dia. MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 150 mm dia. Cast Iron sluice valve-1no. (PN rating 1.0), gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 100 mm dia. MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice valve 100 mm dia. and NRV 100 mm dia. alongwith by pass arrangement (class 300 accompanied with manufacturer’s in house test certificate) gaskets, nuts, bolts, washers. Job includes greasing work, P/F of graphited gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing / fitting and laying of copper cable 70 mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 95 mm2 copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length alongwith neutral wire conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 400 ampere MCCB of 50KA breaking strength. Proper chemical earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc.
Making connection of Sump outlet pipe with suction lines through 200 mm dia. MS pipe manifold, Making connection of delivery lines with rising main through 150 mm dia. MS pipe manifold including painting work. Job includes providing / fitting of 100 mm dia. cast steel NRV (class 300) at distance of 500 meters from stage-2nd. Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house. Job further includes providing of maintenance tool kit as per enclosed annexure. and providing of chain pulley block (1no.) 5 ton alongwith tripod stand. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc.
Providing and fitting of overhead MS girder/ pipe of required size so as to sustain the load of material / equipment / machinery while lifting / shifting of the material / equipments / machinery.
Providing, carriage, installation, testing and commissioning of 3 phase, 150 KVA Voltage Stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 12 gauge container chamber alongwith allied works. Job includes providing of 150 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of single core armoured Al. cable of 185 mm2 from electric pole to 400 ampere main switch in four leads approximately 50 meters length of each lead and further Providing and fitting of 95 mm2 copper cable from 400 ampere main switch to voltage stabilizer approximately 20 meters in length complete with insulation and thimbling. The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper chemical earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc.
PALMAR LIFT STAGE-3RD
Providing, installation, testing and commissioning of 3000 GPH x 280 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block of size 6’x3’x4’ (or as per pump-motor base frame dimensions) by using reinforcement steel of 12 mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. Providing, fabrication and laying of 80 mm dia. MS suction pipe line to the pump set of length as per site conditions condition and upto maximum of approximately 6 meters each including 80 mm dia. MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 80 mm dia. Cast Iron sluice valve-1no. (PN rating 1.0), gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 65 mm dia. MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice valve 65 mm dia. and NRV 65 mm dia. alongwith by pass arrangement (class 300 accompanied with manufacturer’s in house test certificate) gaskets, nuts, bolts, washers. Job includes greasing work, P/F of graphited gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing / fitting and laying of copper cable 35 mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 50 mm2 copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length alongwith neutral wire conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 250 ampere MCCB of 50KA breaking strength. Proper chemical earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc.
Making connection of Sump outlet pipe with suction lines through 100 mm dia. MS pipe manifold, Making connection of delivery lines with rising main through 100 mm dia. MS pipe manifold including painting work. Job includes providing / fitting of 65 mm dia. cast steel NRV (class 300) at distance of 500 meters from stage-3rd. Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house. Job further includes providing of maintenance tool kit as per enclosed annexure. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc.
Providing, carriage, installation, testing and commissioning of 3 phase, 100 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 14 gauge container chamber alongwith allied works. Job includes providing of 100 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of single core armoured Al. cable of 120 mm2 from electric pole to 250 ampere main switch in four leads approximately 50 meters length of each lead and further Providing and fitting of 50 mm2 copper cable from 250 ampere main switch to voltage stabilizer approximately 20 meters in length complete with insulation and thimbling. The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper chemical earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc.
UDAIRAJ INFRA POWER PRIVATE LIMITED
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.99 MB
BOQ_710696.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .