REPAIR OF FLOORING, JOINERY, ROOF SHEETS, FALSE CEILING INCL CONNECTED B and R INCL CONNECTED INTERNAL ELECTRIFICATION WORKS TO CERTAIN OTM and MARRIED ACCN AT MIL STN DAGSHAI UNDER GE KASAULI

Schedule 'A' Section - I

Supply and fixing 0.60mm thick Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in any position or slope upto 12 mtr of height including Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and as directed. complete all as specified and directed.

Supply and fixing 0.60mm thick Pre-painted galvalume aluminium zinc coating GI based plain steel sheet of approved colour having tensile strength of 550 Mpa as in ridges, valley gutters etc ,fixed with self tapping screws in any position or slope upto 12 mtr of height including dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and as directed. complete all as specified and directed.

Supply and fixing 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap as in roof covering/cladding to wall, fixed with coach screws and washers or with self tapping screws in any position or slope upto 12mtr height as in patches including dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar patter as in roof coverings complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B1 (using 20mm graded aggregate) as in copings to retaining walls, walls before fixing of roof sheets, roof kerbs or mud stops, rounded or chamfered on edges, cills, steps, fixing MS hold fast, filing gaps/spaces between wooden/ mild steel member embedded in stone / brick masonry wall etc including use and waste of form work in any position or slope upto 12mtr height complete all as specified and directed.

Supply and fixing 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap as in roof covering/ cladding to wall, fixed with coach screw and washers or with self tapping screws in any position or slope upto 12mtr height as in patches including dismantling plain or corrugated fibre sheeting, any gauge, thickness complete all as specified and directed.

Supply and fixing 2mm thick plain/textured flexible crystal clear/frosted polycarbonate plain sheets, including cutting to required shape and size as in openings of terraces, balconies, verandahs, windows and similar work fixed on timber frame or MS frames with self driving screws etc including dismantling of old plain or corrugated fibre, polycarbonate sheeting any gauge, thickness etc complete all as specified and directed

Taking down eaves gutters, rain water pipes (any size or pattern) including flashing (wooden or mild steel sheeting, all fitting heads shoes bends swan necks etc, measured overall as fixed along the centre line over fitting and accessories complete all as specifed and directed.

10 Square Metre

Supply and fixing 160mm dia PVC (SWR) Pipes for rain water gutters, single or double socketed, in any length with rubber ring joints fixed to stone/ brick walls with heavy duty MS clamps, nuts & bolts etc complete all as specified and as directed.

Supply and fixing 160mm dia PVC (SWR ) bends for rain water gutters (with or without door), elbow etc with rubber ring joints fixed to walls complete all as specified and as directed.

Material and labour for mild steel works for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, hook and pintle hinges, clamps, hold fasts, wall ties, wind ties, plain angle cleats for securing purlins to wood trusses or rafters knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 at any position or slope upto 12mtr height incuding painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal/ square nut or Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised of any size and length as per site requirment etc complete all as specified and directed.

Material and labour for 6 mm thick plywood, 5 No of ply, grade BWR, type BB fixed with screws over timber frame work including painting with two coats of synthetic enamel paint over a coat of primer on one side after fixing complete including dismantling of old false ceiling other than AC board any description any type fixed in any position with nails or screws etc including fillets complete all as specified and directed.

Material and labour for 2nd class hard wood plain fillets sectional area exc 13 & n.exc 25 sq.cm, square, rectangular or triangular in section, clean sawn, fixed straight or curved, secured with nails or brads etc including Dismantling timber scantling 40 sq.cm and under in section in any position in framed work as in fillets, rails, posts, rafters, purlins, etc. complete all as specified and as directed.complete all as specified and as directed.

Material and labour for 2nd class hard wood plain fillets sectional area exc 06 & n.exc 13 sq.cm, square, rectangular or triangular in section, clean sawn, fixed straight or curved, secured with nails or brads etc including Dismantling timber scantling 40 sq.cm and under in section in any position in framed work as in fillets, rails, posts, rafters, purlins, etc. complete all as specified and as directed. complete all as specified and as directed.

Supply and fixing for 2nd class hard wood over 40 sqcm as in roof trusses, members, scantling etc clean sawn timber framed and fixed in any position upto 10mtr height including dismantling timber scantling 40 sq.cm and over in section in any position in framed or unframed work etc complete all as specified and as directed.complete all as specified and as directed.

Per 10 Square Metre

Supply and fixing in repairs PVC sheets 1.50 mm thick laminated homogeneous, coloured, marbled mosaic or mottled finish, laid with approved rubber based /synthetic adhesive or as per manufacturer's instructions etc complete all as specified and as directed.

Supply and fixing in repairs 40mm thick 2nd class hardwood planks as in floors, planed one side, with butt joints and fixed with screws etc to existing floors in patches, including cutting out, piecing, heading joints etc complete all as specified and as directed.

Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion in concrete, brick work, masonary etc, and making good disturbed ground complete all as specified and directed

Dismantling wrought iron or mild steel work of any description any position not otherwise provided complete all as specified

Supply and fixing for mild steel section framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, window guard bars, plain, let in and fixed independently in wooden frames including MS screws, L or T section supports for shelves, sinks etc and similar work conforming to Fe.290.Gde-E-165 complete incuding painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed.

Supply and fixing Hard drawn steel wire fabric weight n.exc 4 kg/Sqm cut to lengths, bent to shape required and fixed/shouldered on wooden/MS frame work etc incuding painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed.

Material and labour for non skid ceramic joint less coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles laid over 15mm thick screed bed in cement mortar 1:6 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing debris/ rubbish etc out of MoD land complete all as specified and as directed.complete all as specified and as directed.

Material and labour for 8-9 mm thick Vitrified ceramic tiles light shade (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over 15 mm thick screed bed 1:6 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing debris/ rubbish etc out of MoD land complete all as specified and as directed. complete all as specified and as directed.

Material and labour for 8-9 mm thick Vitrified ceramic tiles light shade (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over 15 mm thick screed bed 1:6 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing debris/ rubbish etc out of MoD land complete all as specified and as directed. complete all as specified and as directed.

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) of any description n.exe 1.5 Sqm each including iron mongries complete all as specified and as directed.

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) of any description exe 1.5 Sqm but n exc 4 sqm each including iron mongries complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm and n exc 2 sqm each including iron mongries complete all as specified and directed

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed Note : Rates are included for M.S. hold fast/ lugs or SS dash fasteners.

Supply and fixing 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed.

Supply and fixing 35 mm thick factory made 2nd class hard wood partly or fully glazed and skelton shutter (Single or double leaf) open rebated and prepared to receive glass ,gauge etc divided into squares with plain, chamfered or rounded, mitred beads, rebated sash bars any numbers for securing glass, etc or partly with panels of 9mm BWP commercial ply etc with size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a) including painting two coats of synthetic enamel paint over a coat of primer after fixing to chowkats etc complete all as specified and as directed.

Supply and fixing mild steel Framed work as in doors or gates of angle, steel sheeting or other section with gusset plates, rails, braces, etc.by shouldering, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc conforming to Fe 410-W (Gde E -250) Quality A including painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed.

Supply and fixing Pressed steel frames for doors of size 125 x 60mm as per site requirement with one or more rebates including necessary fi

xing lugs, hinges, lock strike plate etc including painting two coats of synthetic enamel paint over a coat of priming complete as specified and directed.

Material and labour 2nd class hardwood as in plain, solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints including painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and as directed Note : Rates are included for M.S. hold fast/ lugs or SS dash fasteners.

Supply and fixing in Indoor type 2 RAY oval Warm white color up down led (3-5) Watt Wall Mounted IP 65 step light fixture having 2 light sources with high quality metal alloy and acrylic with no rust surface, frosted lacquer paint treatment not easy to oxidation with power saving , 220V (5x5x5)Cm high performance, suitable for mounting at wall including all acessories for fixing /in hanging position all as specified and directed by Engr-in-Charge.

Supply and fixing aluminium power coating of approved colour (Thickness or powder coating not less than 50 micron) frame for doors, windows, ventilators, partitions incl necessary joining cleats, rubber packing, snap beading, glazing clips for fixing glass etc with one or more rebates or double/ triple track channels for sliding shutter windows including joining cleat and steel screw for fixing frame to walls/jambs etc. complete all as specified and directed.

Supply and fixing aluminium power coating of approved colour (Thickness or powder coating not less than 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc. complete all as specified

Supply and fixing powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

Supply and fixing aluminium power coated (Thickness or powder coating not less than 50 micron of approved colour) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading screws etc. complete all as specified and directed.

Supply and fixing 9mm thick pre-laminated particle board exterior grade, both side laminations of approved colour and pattern fixed to wooden / aluminium frame work as in partitions, doors etc including necssary fittings etc complete all as specified and as directed.

Supply and fixing in repairs fancy type decorated stainless steel curtain hanging rails/rods of 25mm dia inlcuding adjustable SS brackets and SS decorative end caps or finials for each window and door etc complete all as specified and directed

Supply and fixing stainless steel 100 mm long butt hinges medium weight and fixed with stainless steel screws complete all as specified and directed.

Supply and fixing stainless steel 200mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing stainless steel 150mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing stainless steel 150mm long handles'D' type (Heavy duty) glossy finish and fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing stainless steel 200mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed

Supply and fixing stainless steel 300mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed

Supply and fixing in repairs stainless steel 200mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing in repairs stainless steel 150mm long handles'D' type (Heavy duty) glossy finish and fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing in repairs stainless steel 300mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed

Supply and fixing for floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring over all length of cover plate 150mm complete all as specified and directed.

Supply and fixing in repairs mild steel 375mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixing 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty or fixing in aluminium shutters/frames in any shape and size complete all as specified and as directed.

Supply and fixing 4.80 mm thick obscured or frosted glass, ordinary quality and glazing with oil putty or fixing in aluminium shutters/frames in any shape and size complete all as specified and as directed.

Supply and fixing 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty, fixing in aluminium shutters/frames or with 2nd class hardwood fillets/ Beads, straight (any size) for glazed joinery in any shape and size including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and as directed.

Supply and fixing 4.80 mm thick obscured or frosted glass, ordinary quality and glazing with oil putty, fixing in aluminium shutters/frames or with 2nd class hardwood fillets/ Beads, straight (any size) for glazed joinery in any shape and size including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and as directed.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or nails including 2nd class hardwood fillets/ Beads, straight (any size) for gauzed joinery complete all as specified and directed.

Supply and fixing in repairs for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or nails including 2nd class hardwood fillets/ Beads, straight (any size) for gauzed joinery, renewed, including mitres including fixing with nails etc and removing old beads complete all as specified and directed.

Demolition of cement concrete (unreinforced) as in roofs, floors (other than ground floors) at any position upto 15mtr height complete and removing debris/ rubbish etc out of MoD land complete all as specified and as directed.

Material and labour for 25mm thick cement concrete type B-0. 1:2:4 (12.5mm graded aggregate) as in sub base/levelling course on roof surfaces at any position upto 15mtr height complete all as specified and directed.

Material and labour for cleaning surfaces and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m etc on roof surfaces at any position upto 15mtr height complete all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application on roof surfaces at any position upto 15mtr height complete all as specified and directed

Material and labour for rendering 15mm thick in CM (1:6) on stone or brick-work surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for taking down cement plaster in patches o

n brick or concrete surfaces etc at any height upto 12 mtr including racking out joints, hacking for key scrubbing down with water etc to receive new plaster and rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces as in chajja, ceilings etc finished even and smooth complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper of colour to match with existing shade, over a coat of 2mm thick putty in two layers of 1mm each complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats applying two coats of Exterior emulsion paint (Weather coat) of colour approved by Engr - in- charge, over a coat of 2mm thick putty in two layers of 1mm each and including priming coat of exterior primer over new surfaces. etc complete all as specified and as directed.

Supply and fixing in indoor type Wall Mounted modern light for living rooms and bed rooms 220V, (2700-3500k), white color,Round shaped including LED bulb (5-7) watt (25x25x25)Cm with high performance, suitable for mounting at wall including all acessories for fixing /in hanging position all as specified and directed by Engr-in-Charge.

Material and labour for brick work with sub class ‘B’ old size bricks in cement mortar 1:6 as in walls, drains, steps, manholes, chambers, gaps between walls and roofsheets upto 12 mtr height including demolition of brick or stone masonary built in cement mortar including all quoins, arches, piller, precast concrete blocks etc upto 12 mtr height complete all as specified and as directed.

Material and labour for walling of random rubble, uncoursed well bonded, built in CM (1:4) as in retaining walls, road side parapet walls, drains, steps including demolition of brick or stone masonary built in cement mortar including all quoins, arches, piller, precast concrete blocks etc upto 12 mtr height complete all as specified and as directed.

Material and labour for precast PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bonder stones set in cement mortar 1:4 complete all as specified and directed.

Supply and fixing PVC (SWR) Pipes 75 mm dia as weep holes in retaining wall, complete all as specified.

Material and labour for raised pointing in CM 1:4 on stone masonry walls including taking down old pointing in cement mortar, racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc complete all as specified and directed.

Material and labour for taking down cement plaster in patches on brick, stone or concrete surfaces as in walls, retaining walls, road side parapets etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster and rendering 20mm thick in CM (1:6) on stone or brick-work surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of cement base paint of over alkali resistance primer etc complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description and applying two coats of synthetic enamel paint of approved tint etc complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description and applying two coats of synthetic enamel paint of approved tint etc complete all as specified and directed.

Per Point

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc and removing debris/rubbish etc out of MoD land complete all as specified and directed.

Supply and fixing in repairs, Zebra fastner of size 12x100 mm complete all as specified and directed.

Material and labour for Chequered cement concrete tiles 30cmx 30cm x 25 mm thick, with grey cement and pigment set jointed and pointed in neat cement slurry over and including 15 mm thick screed bed in CM 1:6 in floors, steps, risers with grey cement and pigments etc complete all as specified and as directed.

Material and labour for dismantling Machine pressed precast concrete interlocking paver block and refixing at same or different place of any thickness, shape and size complete all as specified and directed

Material and labour for cement concrete 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in sub base floor and in foundation with necessary form work including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials out of MoD land ) complete all as specified and directed.

One light /Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed.

One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed.

Material and labour for PCC Type B1 1: 2:4 (20 mm graded stone aggregate ) as in mud stops, rounded or chamfered on edges, coping to retaining walls or parapet walls ,kneelers , appex stone or packing sides of interlocking/ chequered tiles etc with necessary formwork including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials out of MoD land ) complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC Casing-n-caping of any size/dia, medium grade fixed on surface of wall complete incl all PVC accessories / fittings, brass screws, washers etc, incl providing 3mm thick plastic laminated sheet top cover for mounting switches/ sockets on boards with suitable size sunk boxes or with PVC gang boxes as per site requirements and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly including taking down old point wiring and making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the followings :-

One two way point controlled by two, 2 way switches 06 Amps complete all as specified and directed.

Each Set

One light / Exhaust fan point controlled by one, one way switch 06 Amps complete all as specified and directed.

All as per serial item No 87.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and directed.

One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed.

One 3 pin,06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed.

Material and labour for PCC Type B1 1: 2:4 (20 mm graded stone aggregate ) as in mud stops, rounded or chamfered on edges, coping to retaining walls or parapet walls ,kneelers , appex stone or packing sides of interlocking/ chequered tiles etc with necessary formwork including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials out of MoD land ) complete all as specified and directed.

All as per serial item No 87.03 here - in - before but with 4 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed.

One bell point controlled by one, one way switch 06 Amps complete all as specified and directed.

All as per serial item No 88.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and directed.

All as per serial item No 88.03 here - in - before but with 4 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed.

Supply and fixing in replacement, switch piano flush type, 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

Supply and fixing in replacement, switch piano flush type,16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

Supply and fixing in replacement, of socket outlet 2 in 1, 3 pin, 5 &15 Amps 240 volts complete all as specified & directed by Engr-in-Charge

Supply and fixing in replacement, of socket outlet 3 pin, 05 Amps 240 volts complete all as specified & directed by Engr-in-Charge

Supply and fixing in replacement, bell push flush type , 06 amps , 240 volts all as directed by Engr-in-Charge

Supply and fixing in replacement, door bell ding dong type , 240 volts AC all as directed by Engr-in-Charge

Supply and fixing plain mild steel sheeting 0.80mm thick as in rain water gutters, drip and straight flashings (length and girth as fixed ), ridges, hips, and similar work etc fixed as welded or soldered joints, reveting are provided etc in any position or slope upto 12mtr height incuding painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed. Note : Rates are included for providing nozzles, stop ends, drop ends made of mild steel sheeting 0.80mm thick with necessary fixing arrangement/ jointing with rubber/silicon sealant for PVC downwater pipes and supplying and fixing of 15mm thick 2nd class hard wood planks for support to MS flashings (length and width as per MS flashing) fixed with nails or self tapping screws to MS or wooden members.

Supply and fixing in replacement, switch piano flush type,

Supply and fixing GI Clip in Metal Ceiling plain Globel white colour tiles of size 600 x 600 mm, 0.5 mm thick with 25 mm height, made of GI sheet having galvanizing of 100 gsm/sqm (both side inclusive) , factory painted, 20 % perforation area with 1.8mm dia holes and having NRC of 0.5 module, which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centre to centre, suspending the main C carrier of size 10x38x10mm made of GI steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6mm, rawl plugs of size 38x12 mm and C carrier suspension clip and mair carrier bracket at 1000 mm c/c. Inverted triangle shaped spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centres with help of suspension brackets. Wherever the main C carrier and T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in into spring T , The grid is suspended from the roof with min 6mm GI rods for quick adjustment at max 5000mm length or as per manufacturer instructions etc including dismantling of old metal false ceiling of any description any thickness complete all as specifie and directed Note : Work shall be done by authorised applicator of the manufacturer.

06 Amps single pole, two way 240 volts complete all as specified & directed. by Engr-in-Charge

Supply and fixing in replacement, lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge.

Supply and fixing Surface mounted LED bulk head 10 watt luminaire with ABS body & polycarbonate diffuser IP 65 including connecting to ceiling rose with 0.5 sqmm two core copper flexible conductor cable of suitable size including all acessories for fixing on wall all as specified and directed by Engr-in-Charge.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:

Supply and fixing ceiling rose surface, bakelite, three terminal, 240 volts complete all as specified and directed.

Material and labour for sub main wiring with single core PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC concealed conduit of required size with all fittings and accessories alongwith one single core green colour PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces etc, all as specified and directed.

Material and labour for sub main wiring with single core PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC concealed conduit of required size with all fittings and accessories alongwith one single core green colour PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces etc, all as specified and directed.

3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Dismantiling of brick work or stone masonary, precast cement concrete waling built in cement mortar including all quoins, arches, pillars etc and Material & labour for walling of random rubble, uncoursed stone masonry, well bonded, bedded and solidly hearted, built in Cement mortar 1:4 complete except stone all as specified and as directed. NOTE:- The serviceable stones obtained under this item will be re-used after removing motar, cleaning with water, etc.

-Ditto- all as per item No 103.00, but of size 8 way SPN.

-Ditto- all as per item No 103.00, but of size 12 way SPN.

Supply and fixing MCB SP, 'B' series, 6 Amp to 32 Amp, including taking down unserviceable complete all as specified and as directed.

Supply and fixing MCCB 4 Pole, 100 Amps, 16 KA 415 Volt, including taking down unserviceable complete all as specified and as directed.

Supply and fixing MCCB 4 Pole, 63 Amps, 16 KA 415 Volt, including taking down unserviceable complete all as specified and as directed.

Supply and fixing single pole and neutral enclosure with a two pin and earth plus and socket board with IS 13032, IS 8623 complete with one single pole 20 amp MCB complete in replacement and taking down old unsv all as specified and directed.

Supply, laying, commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc in replacement of old unsv cable complete all as specified and directed.

-ditto- all as per item No 112.00, but of size 16 Sqmm, 4 core.

-ditto- all as per item No 112.00, but of size 10 Sqmm, 2 core.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in hard/dense soil and gating out in hard/dense soil complete all as specified and directed.

Material and labour for double walled corrugated HDPE duct pipe of 50 mm outer dia confirming to IS-14390(Part-II) of approved colour with fittings for cable protection complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.

Material and labour for taking down the unsv geyser of 25/ 50 ltr capacities from the site after disconnecting the water connection, electric connection, opening the geyser assembly and descalling the deposits in the inner container and outlet water pipe set complete all as directed by Engineer-in-Charge. (Note:- Replacement of unsv bolts, rubber real, ring nuts, washers to be included in the rate quoted by tenderer. Material & labour for GI fittings and other connected works shall be measured and paid for separately under respective items of schedule ‘A’ here in after) :-

Supply & fix in repair of geyser syphon assembly steel plate with nuts and bolts, washers, clamps and rubber ring any Make of geyser, for 25/50 ltr capacity of Geysers.

Supply and fixing in repairs, Thermostatic switch, ISI marked, suitable for geysers of any capacity of make and model as per eixsting one incl replacing and making electric connections complete all as specified and directed.

Supply and fixing in repairs, Heating element 1.5 KW capacity with rubber ring Round/triangular type complete with clamps, nuts and bolts washers, etc for geysers, ISI marked suitable as per existing make and model incl replacing and making connections complete all as specified and directed.

All as per ser item no 122.00, but of capacity 2.0KW complete.

Supply and fixing in replacement, LED post top light fitting (20-22)Watt IP65 Rated LED Post Top ideal to lit up parks, garden ways and heritage sites incl LED light and making connections complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs, Non return valve 15mm dia made of bronze ISI marked heavy duty complete all as directed by Engineer-in-Charge.

Supply and fixing in repairs, 15mm dia PVC connection 450 mm long , suitable for hot water supply ,complete with 2 Nos brass nuts complete all as specified and directed.

Supply and fixing in repairs, 15mm dia PVC connection 450 mm long , suitable for cold water supply ,complete with 2 Nos brass nuts complete all as specified and directed.

Supply and fixing in repairs, modular switch socket combination 16 A, 6 pin, 3 module which includes white cover plate with frame 3 module and PVC Surface mounted box 3 module complete all as specified & directed by Engr-in-Charge.

Material and labour for rubber moulded machine pressed precast concrete interlocking paver block with grey cement and pigment of approved shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade complete all as specified and as directed.

Supply and fixing in repairs, modular switch socket combination 03 pin 06 A,3 Module which includes white cover plate with frame 3 Module and PVC surface mounted box 3 Module type complete all as specified & directed by Engr-in-Charge

Material and labour for point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit concealed in walls by making cutting in brick/stone masonry wall of required size with all fittings and accessories, incl sunken boxes and hylem sheet alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly including taking down old point wiring and making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the following :- Note : (i) The Switch, sockets shall be mounted on newly provided MS sunken boxes with in and incl 3mm thick hylem sheet of suitable size. (ii) The rate for sunken boxes, hylem sheet and all accessories shall deemed to be included in the quotes rates of the item itself. No seperate payment shall be made in this regard.

Supply and fix exhaust fan, PLASTIC body heavy duty AC single Phase 230V of size 300mm sweep with, blades, and frame and louvers including taking down unserviceable complete all as specified and as directed.

Supply and fixing in walls Surface Mounted General Purpose 10 Watts, LED Batten in Extruded Aluminium fixed in repair incl making all necessary connection from ceiling rose to light fittings complete all as specified and directed.

Supply and fix exhaust fan, steel body heavy duty AC single Phase 230V of size 300mm sweep with, blades, and frame and louvers including taking down unserviceable complete all as specified and as directed.

Supply and fixing building security Lights of 35W with best in class design & Robust heat sink 6500k along with class leading IP 65 & Surge protection including provision of 1 nos GI medium grade 25mm dia bracket of total length 50 cm incl 2 Nos MS Clamp and fastners complete all as specified and directed.

Supply and fixing self ballasted LED Retrofit Bulb 5 Star Bulbs (9-12) Watt with PBT body shell and PC diffuser 210 degree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) complete all as specified and as directed.

Supply and fixing in repairs 1'x1' LED luminaire 15-20 watts, 4000k,1125lm, 240V white color Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling including all acessories for fixing in false ceiling/ceiling/in hanging position all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs, LED light fitting 12watts Round surface mounted LED panel. PDC aluminum housing and high translucent frosted plastic diffuser makes it a robust Luminaire. Efficacy 100lm/w incl making connections complete all as specified and directed by Engr-in-Charge.

Supply and fixing in wall Surface Mounted General Purpose 18 Watts, LED Batten in Extruded Aluminium having THD < 10% fixed in repair incl making all necessary connection from ceiling rose to light fittings complete all as specified and directed.

Supply and fixing in repairs 2'x2' LED luminaire 36watts, 4000k, Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling including all acessories for fixing in false ceiling/ceiling/in hanging position all as specified and directed by Engr-in-Charge.

Supply and fixing in repair/replacement of PVC gang box 2 WAY suitable for 6 Amp Socket and 6 Amp switch complete all as per specified and directed