Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC HOUSE NO 206 GALI NO 4 GAUPURI OPP GAUSHALA PHATAK GHAZIABAD UP 201009 | GHAZIABAD | UTTAR PRADESH | 201009 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹3.9 L+₹26,515.50 (7.31%)Rejected-AOC INDEX NO E 108 HQ CWE NO 2 DELHI CANTT J 636 SECTOR 23 SANJAY NAGAR GHAZIABAD UTTAR PRADESH 201002 | GHAZIABAD | UTTAR PRADESH | 201002 | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹4.3 L+₹63,862.40 (17.6%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹4.3 L+₹68,605.30 (18.9%)Rejected-AOC | L4 | Rejected-AOC Other than lowest bidder | |
| 5 | L5₹5.0 L+₹1.4 L (37.5%)Rejected-AOC | L5 | Rejected-AOC Other than lowest bidder |
Tender Value
₹8 L
EMD Value
₹16,000
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I CG
AGE I CG Noida
REPAIR TO PLINTH PROTECTION, BDY WALL AND PATH AT SECTOR-62 CG NOIDA UNDER AGE (I) NOIDA
2024_MES_663331_1
AGE I CGN 12 24 25
Open Tender
Civil Works
Item Rate
240 days
AGE I CG NOIDA
E a i
8 documents required · 8 mandatory
₹500
AGE I CG
₹16,000
12 Dec 2024
2 Jul 2024
6 Sept 2024
2 Jul 2024
4 Sept 2024
16 Jul 2024
Amount
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.
Demolition of brick or stone masonry built in cement mortar including all necessary arches quoins etc. complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.
Demolition of cement concrete (unreinforced in ground floors & pavings n.exc 15 cm thick (below or above ground level) complete all as specified and directed.
Taking down chowkat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed.
Taking down shutter of any description n/exe 1.00 sqm each complete all as specified and directed.
Dismantling structural steel work including doors,window and gates but excluding framed truss etc. complete all as specified and directed.
M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.
All as per Srl item No 09 but excepts bricks.
M&L rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 finishing on brick or concrete surfaces finished even & smooth without using extra cement in ceiling complete.
M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushesand water to expose the stone chippings complete all as specified Note: Forming grooves shall be measured and paid made separately
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
M&L for providing 75 mm thick cement concrete 1:3:6 type C-2 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.
M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded aggregate as in floor to receive floor finishes etc. complete all as specified and directed.
S&F Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 all as specified and directed.
M&L for vitrified /Granite /Marble /wood tiles textures ceramic 10 mm tiles in vertical surfaces or floors n exc 0.36 Sqm, over 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match .
M&L for kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match thick shade of the slab including rubbing and polishing laid over 15mm thick screed bed in CM (1:4) complete all as specified and directed.
All as per item No 19 here-in-before but on vertical surfaces of walls /skirting/dado etc over 10 mm thick backing coat in CM 1:4.
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 15 mm thick screed bed in CM 1:4 all as spd & directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15656 -2006 of 60 mm thick M -35 complete all as specified and directed.
M&L for sand filling 50 mm under floors or foundation, and receiving to interlocking tiles, complete all as specified and directed.
S&F Pressed steel frames (105 x 60mm )for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified.
S&F 2nd class hard wood 35 mm thick panelled shutter (any number of panels) with panels of veneered particle board medium density, wood particle board with commercial face veneers .
S&F 35mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitered beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) (kail) complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.
S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed.
S&F aluminium handle extruded fabricate type anodised of size 150 mm complete all as specified and directed.
S&F for SS butt hinges 100mm medium weight cold rolled mild steel complete all as specified and directed.
S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.
Dismantling water storage tanks of any description exc 1000 liters capacity and removing from site complete all as specified.
S&F for Rotational moulded polythylene 1000 liters capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.
M&L for applying 3 mm thick wall care putty and two coats of oil bound distemper on NEWLY plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
M&L for applying 3 mm thick wall care putty on OLD SURFACES of wall and including two coats of oil bound distemper on plastered/ unplastered surfaces of wall including complete removal of existing treatment.
M&L for preparing plastered or un-plastered New surface of ceiling and applying three coats of white wash.
M&L for applying two coats of white wash on OLD SURFACES of ceiling including complete removal of existing treatment.
M&L for two coats of synthetic enamel paint on NEW WOODEN surfaces over a coat of pink primer to new surfaces including preparation of surfaces, over 10cm width or girth.
S&F stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete all as specified and directed.
S&F in repairs urinal , size of 380 x 405 x 590mm white , with grating and union for discharge pipe including flushing system, flush pipe & wate pipe ) all as specified & directed.
Providing and fixing factory made uPVC white colour casement/sliding window/door/ventilator, made of extrudedprofiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) Note:-Each member of window to be measured separately wrth clear length Casement window (outward /inward opening) with hinge system A(1) Frame (60mm x 58mm)
Providing and fixing stainless steel (SS-304 grade) A 200 x 19 x1.9 mm friction hinges to the side/top hung uPVC windows/Ventilator,of approved quality, with necessary stainless steel screws etc. complete all as specified and directed.
Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete all as specified and directed.
Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete all as specified and directed.
S&F figured glass, pin head type 4mm thick, ordinary quaility, not exceeding 0.5 Sqm in each pane and glazed with oil putty in square all as specified and directed.
M&L for two Component Polymer modified flexible cementitious waterproof (breathable) coating of equivalent flexible and elastic polymer modified, 2 component cementitious coating system having UV resistance applied in 2 coats in the form of slurry at right angles by way of brush at a total consumption of 2 Kg. per Sqmt. over the Vertical Brick Wall, Curing Testing etc Completed- Including Gola Vata & Joints Treatment etc.complete as specified and as diected by Engr-in-charge.
M&L for Providing Protective levelling plaster for Horizontal & Vertical Surfaces of average 15-20mm thick in cement mortar (1:4) including mixed with liquid integral waterproofing admixture @ 200 ml. per bag of cement, finished smooth, curing etc. complete as specified and as diected by Engr-in-charge.
KRISHANA ELECTRIC WORKS (BID ID -3071082)
DP COMPLEX (BID ID -3071443)
Sanjay Associates (BID ID -3072159)
V.V CONSTRUCTIONS (BID ID -3082102)
M/S R.S. Builders (BID ID -3072441)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .