GE S U 40 2022 23 SPECIAL REPAIR TO BASKET BALL COURT OF 10 EW BN AND

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard /dense soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard /dense soil, complete all as specified and as directed.

PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) in foundations, filling and mass concrete, complete all as specified and as directed.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Returning, filling including spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil complete all as specified and as directed.

Removing excavated material (soils) exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

PCC 1:2:4 Type B-1(using 20 mm graded crushed stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs etc complete all as specified and as directed.

Material and labour for providing Reinforced Cement Concrete design mix M-25 (using 20 mm graded crushed stone aggregates) as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc complete all as specified and as directed.

Material and labour for providing Reinforced Cement Concrete design mix M-25 (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Material and labour for providing Reinforced Cement Concrete design mix M-25 (using 20 mm graded crushed stone aggregates) as in beams, cantilever, lintels over 1.5 m complete all as specified and as directed.

Material and labour for providing Reinforced Cement Concrete design mix M-25 (using 20 mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floor, roof, landing, balconies, conopies, decks, slab and in shelves and like complete all as specified and as directed.

Use and waste formwork to sides of concrete foundation footings base of coloumns sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and as directed.

Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete complete all as specified and as directed.

Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, complete all as specified and as directed.

Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per srl item No. 18 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc complete all as specified and as directed.

Rendering 10 mm thick on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15 mm thick in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing compound complete all as specified and as directed. (WPC shall be measured separtely).

Supply only Liquid water proofing compound complete all as specified and as directed.

Rendering 05 mm thick in CM 1:4 on fair surfaces of ceiling and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces for backing coat for tiles complete all as specified and as directed.

Glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm or 300mm x 600mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and as directed.

75 mm thick cement concrete (1:4:8) type D-2 as sub base to floor complete all as specified and as directed.

25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floor and finished even and fair complete all as specified and as directed.

15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Non-skid coloured ceramic tiles (square/ rectangular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

Dura stone tiles of size 305mm x 305mm x 10 mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tiles complete all as specified and as directed. ( Note :Shade/colour as approved by GE)

Hardcore of broken stone or boulders of gauge not exc 63mm and deposited spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

50 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in plinth protection laid in alternate bays (n exc 2 sqm each) area with 6mm wide joints and 10mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and as directed.

Preparation of new plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Preparation of new plastered surfaces on walls and applying two coats of cement based paint complete all as specified and as directed.

Preparation of newly plastered surfaces of walls applying two coats of oil bound distamper over one coat of chalk whitening of desired finish as approved by GE.

Applying one coat birla white wall care putty on newly plastered wall surfaces including preparation of surface by brooming down or steel wire brushing, scrapping down vegetation growth, efflorscent salts and trading oil and greasy spot complete all as specified and as directed.

Mild steel window (Box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dove tailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Mild steel Ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe-290.Gde-E-165 quality A including one shop coat of zinc chrome primer paint including preparation of surfaces at contractor's workshop before fabrication complete all as specified and as directed.

4 mm thick sheet glass of ordinary quality n.exc 0.5 Sqm in each pane complete all as specified and as directed.

Preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. square tube and fixed in opening complete all as specified and as directed.

Factory made solid panel PVC Moulded door shutter 28 to 30mm thick stiles with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm thick plain coloure PVC sheet on back face complete all as specified and as directed.

Aluminum handles cast type, anodised, 150 mm size complete all as specified and as directed.

Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

Pressed steel frames size 105mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc comlete as specified supplied and fixed complete all as specified and as directed.

35mm thick plain framed II nd class hard wood panelled factory made shutters (two panel) with lock rail and panel of 9mm thick BWP commercial ply with size of rail and stiles as per IS 1003 (part-1) kin seasoned and chemically pressure treated complete all as specified and as directed.

Aluminum alloy powder coated sliding door bolt 300 mm long and not less than 12mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Steel water tubing of nominal bore dia 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

Steel water tubing of nominal bore dia 20 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

20mm dia, Ball brass, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.

20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

500 Litre capacity Rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

15 mm dia Bib tap fancy type chomium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

Vitreous China wash basin (Pedestal), white, flat back, size 550 mm x 400 mm excluding tap, chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets complete all as specified and as directed.

Pillar taps 15mm bore fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' and cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

Brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed.

Chromium plated soap dish and fixed with CP brass screws in wooden /plastic cleat complete all as specified and as directed.

100mm dia cast iron sanitary connection pipe upto 300mm length complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to wall complete all as specified and as directed.

Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door complete all as specified and as directed.

Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door complete all as specified and as directed.

75mm bore Cast iron cowls complete all as specified and as directed.

Cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and as directed.

Stack clamps made out of 75mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and as directed.

Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

Vitreous china urinal partition white of size 310mm x 700 mm about 40 cm above floor line complete all as specified and as directed.

Stainless steel wall mounted cloth hanger with 6 peg set complete all as specified and as directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including cast iron P trap, bore of pipe 100 mm. and provision of concrete bedding complete all as specified and as directed.

Cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in surface channels and drains including necessary formwork etc complete all as specified and as directed.

150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed.

Cement concrete 1:4:8 type D-2 (using 40mm graded aggregates) as in bed to 150 mm dia pipes including packing under, and haunching against the sides of pipes after they are laid and tested for complete all as specified and as directed.

Providing Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in manholes cover slab etc complete all as specified and as directed.

Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire ( annealed ) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Demolition cement concrete in ground floors and paving (unreinforced ) nexc. 15 cm thickness ( below or above ground floor) complete all as specified and as directed.

100mm thick cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in floor and finished even and fair complete all as specified and as directed.

Synthetic sports flooring ( 8 layers) with following specifications :- (a) Priming coat on overall surface with roller trowel and brush. (b) Laying Geo fabric net & preboned SPR = latex polymer mat fixing materials (c ) Resurfacer Chemical with silica sand will be spread in two coats, giving seamless uniform surfaces. (d) SBR cushion layer with silica sand will be spread in two coats providing cushion comfort to avoid injury and player comfort. (e) Synthetic acrylic colour coat with silica, chemical and colour. (f) Top acrelic colour coat with hardner. (g) Game line marking.

Moveable basket ball MS pole 150mm dia and standerd height including painting along with 30mm thick high quality fibre glass boards of standerd size, dunking rings, nylon mesh nets and accessories complete all as specified and as directed.

LED wireless Score board (digital) of size 3 feet x 4 feet complete all as specified and as directed.

Electrical work :-

(a) Placing of PVC pipes for flood lights

(b) PVC bends & PVC junctions points

(c ) Forming control/switch board

(d) Installing flood lights (100W)

(e) Installation of TPN & MCB

PCC(1:2:4) type B-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling in post holes complete all as specified and as directed.

Steel work in tubler trusses including special shaped washers etc. complete using EWR or induction butt welded tubes confirming to IS- 1161-1979 grade ST-240 Fe 410-W Grade-E-250 quality-A complete all as specified and as directed.

Roof trusses (framed) trussed, purlins, crane gantries rails and fastenings and heavy brackets, post, eves board including frame work and similar work framing (beam, tee, channel or flat sections) Fe-290 Grade E-250 including distance pieces cleats including welding riveting etc complete all as specified and as directed.

Pre painted galvalume aluminium zinc coating GI based corrogated steel sheet 0.50mm thick crimpted/tapered at the external end slope of any colour having tansile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

MS flat iron wind ties etc confirming to Fe 410-0 or Fe 310-0 including clamps complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Excavation over area n.exc 1.5mtr deep and getting out in any type of soil complete all as specified and as directed.

Mild steel plates (Plain or chequered) channels square cut or notched ordinary or counter sunk) forming holes with riveted, bolted or welded attachment complete all as specified and as directed.

Mild steel bolt 11 to 15mm dia of neck (Machine made ) with hexagonal or square head at one end screwed the other and screwed both ends each screwed end to end fitted with washer and one hexagonal or square nuts, the length of screws exc. 10cm but n, exc 15cm complete all as specified and as directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 W (Gde-E-250 ) qty A. complete all as specified and as directed.

MS Steel screw bolts (machine made) with hexagonal or square heads at one and screwed at other or screwed both ends each screwed and to be fitted with washer and one hexagonal or square nut, exc 16 to 20mm dia of neck and n exc 15cm long complete all as specified and as directed.

MS Steel screw bolts (machine made) with hexagonal or square heads at one and screwed at other or screwed both ends each scrwed and to be fitted with washer and one hexagonal or square nut, exc 12mm to 20mm dia and exc 15cm n exc 30cm long complete all as specified and as directed.

Brick work with sub class 'B' brick straight or curved on plan exc 6m radious in CM 1:4 as in brick work/brick pillars etc complete all as specified and as directed.

2mm thick fibre glass reinforced translucent sheet in any design, colour and size including fixed with screws, fabrication, filling joints with silicon and all accessories, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free, complete all as specified and as directed.

Plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in columns pillars and posts complete all as specified and as directed.

Providing cement concrete 1:2:4 type B-1 (using 12.50mm graded crushed stone aggregates) as in coping including necessary form work complete all as specified and as directed.

Taking down cement plaster on brick/stone wall etc including raking out joints, hacking for key, scrubbing down with water etc. cement complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 Ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit (thickness not less than 1.5mm and 20mm dia), medium grade with Modular metal sunken boxes & PVC back plate for mounting modular type in adequate module of switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sqmm as earth wire stranded and conected to earth dolly complete all as specified and as directed. Make: Havells/ Finolex/ Polycab/ L&T

All as per srl item No 111 but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 Sqmm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 111 but for 3 Pin 16 Amps socket outlet independent with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 Sqmm earth wire standard and connected to earth dolly complete all as specified and as directed.

Modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira

Modular switch 16 Amps single pole one way 230 V, 50 Hz, AC with inner/outer plate complete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira

Modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira

Modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira

Ceiling rose, surface bakelite 65mm x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed. Make: Havells/ Anchor/Indoasian

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately) Make:- Havells/ legrand/ Indo Asian.

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed. Make:- Havells/ legrand/ Indo Asian.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed. Make:- Havells/ legrand/ Indo Asian.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead including taking down old sub main wire complete all as specified and as directed. Make:Havells/polycab/Finolex

Supply and fixing LED lights fitting 1x 20W, 230V, AC decorative box type warm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make - Havells/ Wipro/Syska

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type warm white colour with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make - Havells/ Wipro/Syska

Supply and fixing Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection complete all as specified and as directed. Make:Havells/Bajaj/CG

Supply and fixing LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make - Havells/ Wipro/Syska

TARUN BUILDERS

vmd traders

BHAGWATI TRADERS

VISHWANATH AND SONS

K S BUILDERS

MADAN LAL SHARMA AND SONS

VIRINDER SINGH

RAJ MOHD