PERIODICAL SERVICES AND ALLIED B/R WORKS FOR TECHNICAL AREA AT AF STN ARJAN SINGH UNDER GE AF PANAGARH

Amount

Schedule 'A' BOQ items M&L for complete removal of existing treatment of walls and applying two coats of interior emulsion paint (premium quality) over one coat of alkali resisitant primer paint over a layer of smooth wall care putty finish punning 2 mm thick strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for complete removal of existing treatment of ceiling and applying two coats of interior emulsion paint (premium quality) over one coat of alkali resisitant primer paint over a layer of smooth wall care putty finish punning 2 mm thick strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for complete removal of existing treatment of walls by washing down and smoothing old surface and applying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primer paint over a layer of smooth wall putty finish punning 2 mm thick strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for complete removal of existing treatment of ceiling by washing down and smoothing old surface and applying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primer paint over a layer of smooth wall putty finish punning 2 mm thick strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for preparation of old decorated plastered or un plastered surfaces on wall and applying one coat of interior emulsion paint (premium quality) as per manufacturer instruction with smooth roller finish complete all as specified and directed by Engineer-in-Charge. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for preparation of old decorated plastered or un plastered surfaces on ceilling and applying one coat of interior emulsion paint (premium quality) as per manufacturer instruction with smooth roller finish complete all as specified and directed by Engineer-in-Charge. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for preparation of old decorated plastered or un plastered surfaces on walls and applying one coat of oil bound distemper (premium quality) as per manufacturer instruction with smooth roller finish complete all as specified and directed by Engineer-in-Charge (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for preparation of old plastered or un-plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of oil bound distemper (premium quality) with roller finish complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted wooden and wood based surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint (premium quality) finish complete all as specified and directed by GE.

M&L for preparation of old painted wooden and wood based surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint (premium quality) finish complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted steel surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint (premium quality) complete all as specified and directed by GE.

M&L for preparation of old painted steel surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint (premium quality) complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work, finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces on walls and applying two coats of oil bound distemper (premium quality) over a coat of alkali resistant primer paint over a coat of wall care putty 2mm thick with roller finish complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 20 mm thick in cement mortar (1:4) in two layers (12mm +8mm) on external faces of brick wall or concrete surfaces, finished even and smooth without using extra cement with using approved LWPC on second layer (8mm) as per manufacturer instruction after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge.

Supply only Liquid water proofing compound.

M&L for preparation of new wall surfaces and applying two or more coats of 100% premium quality acrylic emulsion paint (Apex ultima) having VOC less than 50gm/ Ltr and UV resistence as per IS 15489:2005, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with slilicon additive @ 1.43 ltr/10 Sqm over and including a coat of exterior primer applied @ 0.902 ltr/ 10 Sqm with roller finish complete all as specified and directed by GE.

M&L for preparation of old decorated wall surfaces including mechanically brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two or more coat of 100% acrylic distemper (premium quality) paint having VOC less than 50gm/ Ltr and UV resistence as per IS 15489:2005, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with slilicon additive @ 1.43 ltr/10 Sqm over and including a coat of exterior primer applied @ 0.902 ltr/ 10 Sqm including necessary scraffolding, green cloth all around the work site for any position/height with all safety precaution complete all as specified and directed. (Note:-(a) Necessary scraffolding and ladder shall be provided by the contractor in his own arragement. No extra cost shall be paid. (b) No payment for additional height shall be paid to the contractor. (c) Without safety precaution this work not been commenced as decided by Engineer-in-Charge. (d) Green cloth around the work site shall be provided during painting work. No extra cost shall be paid.)

S&F of false ceiling of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with FINE EDGE TILES ARMSTRONG SILHOUTTE EXPOSED GRID SYSTEM after dismantling wall and ceiling boards (fiber,pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete.The tiles should have humidity Resistence (RH of 99%, NRC 0.55 Light Reflectance 85% thermal conductivity K=.052-0.057 w,m k. colour white, fire performance class O class 1 (BS476 Part 6&7) in module size of 600x600x12mm with Bio black coating on the face of the tile, suitable for Green building application, with the recycled content of 63%. The tile shall be laid on Armstrong Silhouette porfile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capcity of minimum 15.68Kg per squaremetre. Sihouette, main rummers & cross Tees to have mitred ends and "birdsmouth" notches to provide mitred crucitform juctions. The Tee Sections have a galvanizing of 120 grams per squaremetre & passed through 500 hrs of salt test. the quoted rate is deemed to be inclusive of cost of necessary scaffolding work required to carry out the job complete all as specified and directed.

S &F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 after dismantling of wrought iron or mild steel work of any description and size not otherwise provided complete all as specified and directed ed.

S&F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-290(Gde E-165) after dismantling of wrought iron or mild steel work of any description and size not otherwise provided complete all as specified and directed .

S&F for wind ties for roof including securing bolts including all necessary drilling, bolting or riverting, etc. and similar work conforming to Fe-290 Gde E-165 etc after dismantling of wrought iron or mild steel work of any description and size not otherwise provided complete all as specified and directed .

M&L for preparation of new or previously untreated steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified by Engineer-in-Charge.

S&F for pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions after dismantling of corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge

S&F for pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters, fixed with self tapping screws including side and end lap as per manufacturer’s instructions after dismantling of plain steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge.

Abida Enterprises (BID ID -3175508)

M/S TRIVENI BUILDERS (BID ID -3170950)

Intime Commotrade Pvt Ltd (BID ID -3170070)