LED Lamps- bulb

LED Lamps- bulb

Light Emitting Diode LED Fixture- LED tube light

Lamp Ballast for HPSV Lamps

Lamp Ballast for HPSV Lamps LED Lamps- Bulb ( 25 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 5Watt/500 lumens 3Watt/300 lumens

5Watt/500 lumens

7Watt/700 lumens

9Watt/900 lumens

12Watt/1200 Lumens

15Watt/1500 Lumens

18Watt 1800 Lumens Colour Temperature (K) 4000 2700

4000

5700

6500 Type of Lamp CAP B22d B22d

E27 Warranty for free replacement (Years) 3 Years 2 Years

3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy >/=130 * 1/20 (Lm/W) Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * Power Factor >/=0.9 * Total Harmonics (%) </=15 * Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) SMD LED CHIP * LED Make HAVELLS * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. 736720 * LED life Certificate Test Report Date 29/06/2017 * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number 89362 * LED Lamp Life Certificate date 29/08/2017 * Name of Lab where test conducted ACCREDIUM CERTIFICATIONS * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * 2/20 Test certificate No. 89362 * Test Report Date 29/08/2017 * Name of lab where test conducted ACCREDIUM CERTIFICATIONS * Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dilbag Singh 441001

Military Engineer Services Garrison Engineer Kamptee-441001 25 15 LED Lamps- Bulb ( 25 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 7Watt/700 lumens 3Watt/300 lumens

18Watt 1800 Lumens Colour Temperature (K) 6500 2700

E27 Warranty for free replacement (Years) 2 Years 2 Years

3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * 3/20 Power Factor >/=0.9 * Total Harmonics (%) </=15 * Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) SMD LED Chip * LED Make panasonic * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. R-83002445 * LED life Certificate Test Report Date 01.04.2016 * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number R-83002445 * LED Lamp Life Certificate date 01.04.2016 * Name of Lab where test conducted ALPHA TEST HOUSE DELHI * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. R-83002445 * Test Report Date 01.04.2016 * Name of lab where test ALPHA TEST HOUSE * 4/20 conducted DELHI Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dilbag Singh 441001

Military Engineer Services Garrison Engineer Kamptee-441001 25 15 LED Lamps- Bulb ( 35 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 12Watt/1200 Lumens 3Watt/300 lumens

18Watt 1800 Lumens Colour Temperature (K) 5700 2700

6500 Type of Lamp CAP E27 B22d

3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * Power Factor >/=0.9 * Total Harmonics (%) </=15 * Driver Efficiency (%) >/=85 * 5/20 LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) <100 Volt and >300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) 6600 * LED Make Panasonic * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. 524743 * LED life Certificate Test Report Date 04/02/2014 * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number 638546 * LED Lamp Life Certificate date 05/02/2014 * Name of Lab where test conducted Bharat test house * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. 638546 * Test Report Date 05/02/2014 * Name of lab where test conducted Bharat test house * Complusory Registration(CRS) of BIS for safety as per IS Yes * 6/20 16102-I * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dilbag Singh 441001

Military Engineer Services Garrison Engineer Kamptee-441001 35 15 LED Lamps- Bulb ( 35 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 15Watt/1500 Lumens 3Watt/300 lumens

3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * Power Factor >/=0.9 * Total Harmonics (%) </=15 * Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * 7/20 Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) SAMSUNG * LED Make SYSKA * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. RSZ150126508-10 * LED life Certificate Test Report Date 27.10.2015 * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number CRS 2015-3147/R-41029106 * LED Lamp Life Certificate date 29.11.2016 * Name of Lab where test conducted BIS * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. L02201745010 * Test Report Date 11.11.2017 * Name of lab where test conducted Conformity Testing Labs Pvt Ltd

Unit - 2 * Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes * * Bold specifications are the golden parameters. Consignees and Quantity 8/20 S.No. Consignee Address Quantity Delivery Days 1 Dilbag Singh 441001

Military Engineer Services Garrison Engineer Kamptee-441001 35 15 Light Emitting Diode LED Fixture- LED Tube Light ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen

20 Watt/2000 lumen

22 Watt/2200 lumen Colour Temperature (K) 4000 2700

6500 Warranty for free replacement (Years) 3 years 2 years

3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Glass Polycarbonate

Glass LED Fixture With Al back

front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig Without * Light Source COB LED Chip * LED Make philips * Length of tube light (Nominal) (in mm) 1220 * FUNCTIONAL LED lamp efficacy (Lm/W) 100 * Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) </= 15% * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes * Temperature Cycling test and supply voltage Yes * 9/20 switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0

25 * Power Factor >/= 0.9 * CERTIFICATIONS BIS Registration certificate under (CRS) number and date IS 16101 : 2012 * Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report LP-47741/17-18 * Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes * EMC Test Yes * * Bold specifications are the golden parameters. Consignees and Quantity 10/20 S.No. Consignee Address Quantity Delivery Days 1 Dilbag Singh 441001

Military Engineer Services Garrison Engineer Kamptee-441001 20 15 Light Emitting Diode LED Fixture- LED Tube Light ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen

6500 Warranty for free replacement (Years) 2 years 2 years

front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With * Light Source SMD LED Chip * LED Make INDIA * Length of tube light (Nominal) (in mm) 1220 * FUNCTIONAL LED lamp efficacy (Lm/W) 100 * Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) </= 15% * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes * 11/20 Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes * Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0

25 * Power Factor >/= 0.9 * CERTIFICATIONS BIS Registration certificate under (CRS) number and date NA * Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report NA * Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes * EMC Test Yes * 12/20 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dilbag Singh 441001

Military Engineer Services Garrison Engineer Kamptee-441001 10 15 Light Emitting Diode LED Fixture- LED Tube Light ( 30 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 20 Watt/2000 lumen 18 Watt/1800 lumen

22 Watt/2200 lumen Colour Temperature (K) 2700 2700

3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Polycarbonate Polycarbonate

front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With * Light Source SMD LED Chip * LED Make BAJAJ * Length of tube light (Nominal) (in mm) 1220 * FUNCTIONAL LED lamp efficacy (Lm/W) 100 * Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) </= 15% * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for Yes * 13/20 6000 hours as per LM80 Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes * Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0

25 * Power Factor >/= 0.9 * CERTIFICATIONS BIS Registration certificate under (CRS) number and date NA * Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report NA * Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes * 14/20 EMC Test Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dilbag Singh 441001

Military Engineer Services Garrison Engineer Kamptee-441001 30 15 Lamp Ballast For HPSV Lamps ( 40 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes * ISI Marked No Yes

No ISI marked if yes declare CM/L Number If 'No' write NA - * Ballast Wattage (in Watts) 70 W 70 W

150 W

250 W

400 W Operating Voltage 220 Volt -240 Volt * Supply frequency (in Hz) 50 Hz +/-5% * CONSTRUCTIONAL Ballast constructional requirements as per IS:15885 (Part 1) shall apply Yes * Winding material Copper wound * Supply current: At rated voltage

the supply current shall not differ by more than 10 Yes * 15/20 percent from the value marked on the ballast when the latter is operated with a reference lamp Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes * Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of IS:15882:2009 latest Yes * Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes * Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes * Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes * Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm * Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes * Rated Maximum operating temperature of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 1:2011 latest) 105 deg C * Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes * 16/20 Ballast shall pass High voltage test 5 KV for 5 Seconds Yes * Watt Loss 15 Watts maximum for 70 W Ballast * Cold resistance at 20 deg. C (Tolerance: t+5%

10%) - must declare 6 * Circuit power factor >/=0.85 * WARRANTY Guaranteed period of replacement 1 Year * CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast

Watt Loss

Tw details Yes * Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable Yes * Test Report Number - * Test Report Date - * Name of Test Lab - * Address of Test Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dilbag Singh 441001

Military Engineer Services Garrison Engineer Kamptee-441001 40 15 Lamp Ballast For HPSV Lamps ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values 17/20 GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes * ISI Marked Yes Yes

the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes * Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes * Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of IS:15882:2009 latest Yes * Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of Yes * 18/20 the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes * Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes * Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm * Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes * Rated Maximum operating temperature of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 1:2011 latest) 105 deg C * Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes * Ballast shall pass High voltage test 5 KV for 5 Seconds Yes * Watt Loss 15 Watts maximum for 70 W Ballast * Cold resistance at 20 deg. C (Tolerance: t+5%

10%) - must declare nil * Circuit power factor >/=0.85 * WARRANTY Guaranteed period of replacement 1 Year * CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast

Tw details Yes * Availability of Type Yes * 19/20 Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable Test Report Number - * Test Report Date - * Name of Test Lab - * Address of Test Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dilbag Singh 441001

Military Engineer Services Garrison Engineer Kamptee-441001 50 15