NIT 09 (23-24) Item 5

Wiring for lightpoint/fanpoint/exhaust fan point/callbell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( As per DJB SOR (E&M 2022), 31.10.2) Group B

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire ( As per DJB SOR (E&M 2022), 31.14.1)

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire ( As per DJB SOR (E&M 2022), 31.14.2)

2 X 4 sq. mm + 1 X 4 sq. mm earth wire ( As per DJB SOR (E&M 2022), 31.14.3)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch ( As per DJB SOR (E&M 2022), 31.24.1)

15/16 A switch ( As per DJB SOR (E&M 2022), 31.24.3)

3 pin 5/6 A socket outlet ( As per DJB SOR (E&M 2022), 31.24.4)

6 pin 15/16 A socket outlet ( As per DJB SOR (E&M 2022), 31.24.5)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. ( As per DJB SOR (E&M 2022), 31.25)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. ( As per DJB SOR (E&M 2022), 31.26)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) ( As per DJB SOR (E&M 2022), 31.28.2)

6 Module (200mmX75mm) ( As per DJB SOR (E&M 2022), 31.28.4)

8 Module (125mmX125mm) ( As per DJB SOR (E&M 2022), 31.28.5)

12 Module (200mmX150mm) ( As per DJB SOR (E&M 2022),31.28.6)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door ( As per DJB SOR (E&M 2022), 32.4.2)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 5A to 32A Single pole and neutral ( As per DJB SOR (E&M 2022), 32.10.1)

Double pole ( As per DJB SOR (E&M 2022), 32.10.3)

63 Amp TPN DJB SOR 32.12.2

S/o 20 Watt Higher Wattage Decorative ultra slim Polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack. ( As per DJB SOR (E&M 2022), 19.2.1)

S/o 70/72 Watt New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. ( As per DJB SOR (E&M-2022), 19.10.6) Armoured Cable

Supply of 16x4.0 Sq mm cable Make Grndlay, Gloster, Any DJB approved

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm( As per DJB SOR( E&M 2022), 37.1.1)

SITC of 1200 mm AC ceiling fan including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. (Model No.Havells SS 390 make or equivalent in Crompton/ Bajaj/Philips ) ( As per DJB SOR (E&M 2022), 20.1.2)

Devraj Enterprises