PROVN OF WASHROOM COMPRISING OF 08 WC, 04 URINAL and 04 WHB EACH FOR DEPT COY, CHQ COY and DUTY COY AND 03 SENTRY POST AND 06 URINAL PTS AND 100 COOLER STANDS AND 120 (FAFA) UTENSIL RACKS AT JCOS/OR MD ACCN AT 39 GTC VARANASI.

Amount

Surface excavation in any type of soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavating in trenches,in any type of soil n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

M&L plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete including sub base of under floors complete all as specified and directed.

M&L reinforced cement concrete design M-25 mix (using 20 mm graded crushed stone aggregate) as in foundation beams, plinth beams, bases for columns complete all as specified and directed.

M&L reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregate) as in columns, pillars,piers, posts and sturuts complete all as specified and directed.

M&L reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers,bressummers, lintels over 1.5m spanin complete all as specified and directed.

M&L reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia & over cut to length bent to shape required including cranking bending, spirally for hooking for columns hooking and binding with including mild steel annealed wire not less than 0.9 mm dia securing with clips complete all as specified and directed.

M&L mild steel TMT bars 8 mm dia cut to length bent to shape required including cranking bending, spirally for hooking for columns hooking and binding with including mild steel annealed wire not less than 0.9 mm dia securing with clips complete all as specified and directed.

M&L mild steel TMT bars 8 mm dia cut to length bent to shape required including cranking bending, spirally for hooking as in stirrups and binding with including mild steel annealed wire not less than 0.9 mm dia securing with clips complete all as specified and directed.

Use and waste form work in flat surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work complete all as specified and directed.

Use and waste form work in flat surfaces to sides of pillars,posts, struts, piers, columns and stanchions complete all as specified and directed.

Use and waste form work in flat surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams,complete all as specified and directed.

Use and waste form work in flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed.

M&L for 25mm thick Type B0 1:2:4 damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work withsub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

M & L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar (1:6), on brick or concrete surfaces finished eveen and smooth with out using extra cement complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar (1:6), on brick or concrete surfaces finished eveen and smooth with out using extra cement including three coat white wash complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:4), on brick or concrete surfaces finished eveen and smooth with out using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:4), on brick or concrete surfaces finished eveen and smooth with out using extra cement including 2 coat of cement base paint complete all as specified and as directed.

M & L 5mm thick plastering on ceiling in CM (1:3) surface finished, even and fair without using extra cement including three coat of white wash complete all as specified and directed.

S & F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails. mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size aluminium anodised handles, cast type complete all as specified and directed.

S&F 100 mm size butt hinges,medium weight extruded stainless steel hinge pin, bright complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.5 Sqm in each pane complete and all as specified and directed.

M&L for plain cement concrete type C-2, 1:3:6 using 40mm graded aggregate 75mm thick in plinth protection/path/hard standing fresh, fair and smooth without using extra cement complete all as specified and directed.

M & L for hard core broken stone of gauge not exceeding 63 mm, deposited spread and levelled in layers not exceeding 15 cm thick, levelling and rammed to a true surface complete all as specified & directed.

M&L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete including sub base of under floors complete all as specified and directed.

M&L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15 mm thick 1:6 screed bed complete all as specified and directed.

M&L For coloured Glazed ceramic tiles in vertical surface 300x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick renderig in cement mortar (1:4) as backing coat complete all as specified and directed.

M & L for 25-28 mm thick machine pressed designer [chequered] cement concrete paving tiles [of size 300x300 mm] having wear resistance coating or wear proof topping, tile fixed with @ 3 Kg cement slurry laid over and including 15 mm thick screed bed or bedding layer in cement sand mortar in 1:6 complete all as specified & directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall necessary clamp etc complete all as specified and directed.

S&F 110mm PVC (SWR) bends with access door complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door.

S&F 110mm PVC (SWR) vent cowlcomplete all as specified and directed.

S&F mild steel Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe complete all as specified and directed.

M & L for concrete bed to drain pipes 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested in plain cement concrete 1:3:6, type C-2( using 40 mm graded crushed stone aggregate ) complete all as specified and directed.

M & L for Reinforced concrete pipes, class NP2, bore of pipe 150mm laid and jointed with collars complete all as specified and directed.

M&L for cutting into existing manholes for 150mm pipe connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for providing precast cement concrete type B1,1:2: 4 (using 20 mm graded stone Agg) as in man hole cover set in CM 1:6 complete all as specified and directed.

S & F 15 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

S & F 20 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

S & F 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including necessary connections to inlet / outlet & wash out pipes, complete as specified in SSR Part-I complete all as specified & directed.

S & F in position 20 mm bore gun metal gate valve with iron wheel head screwed both ends complete all as specified & directed.

S&F brass chromium plated soap dish complete all as specified and directed.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) complete all as specified & directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white flushing cistern and flush pipe) complete including connection to trap, outgoing flushing pipe, anti sypohonage pipe 'P' or 'S' of pipe etc complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete complete all as specified and directed.

S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) white (minimum) including providing PTMT spreader and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long screws, pointing around urinal back in cement connecting water pipe and waste pipe complete all as specified and directed.

S&F urinal partition Toughened glass 10mm thick complete all as specified and directed.

S & F vitreous China wash hand basin table top with marble top Vitreous China wash basin, oval type, size 580x450 (for Hospital use) excluding taps, waste, chain and plug and porcelain stopper but including 32mm dia brass waste coupling and 32 mm dia PVC waste pipe (rigid quality) including fixing of tap etc. complete all as specified and directed.

Supply Only 15mm bore fancy type pillar tap cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered 'hot' or 'Cold' with long screwed shanks and fly nuts fixed to pipe complete all as specified and directed.

S&F 15 mm dia cast fancy type chromium plated fancy type angle valve with long shank and cup, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete and all as specified and directed

S&F 15 m dia two way bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed

S&F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete complete all as specified and directed.

S&F Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges including brackets fixed complete all as specified and directed.

S & F Jet for pedestal pan, chromium plated of standard size (fixed in repair) complete all as specified and as directed .

M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and as directed.

M&L for applying two coats of white wash including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L for applying two coats of white wash including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying two coats of cement base paint including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Supply only water proofing compound (powder) complete all as specified and directed.

S&F Stainless steel plate rack (utensil rack) of size (600mm x 750mm) and depth 300mm made with 0.63mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed.

M&L for providing cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed .

M&L for moorum/red bajri filling in floors or pavings laid in lays nexc 15 cm thick spread levelled and rammed including watering and ramming complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate), finishing cement concrete surface even and smooth in floors complete all as specified and directed.

S&F Pre- painted galvanised aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins,crane grantries, pillars, rails and fastenings and heavy bracket framing (beam,tee,angle,channel,Hollow or flat sections) including distance pieces,cleatsetc.Fe 410-W (Gde - E-250) quality - A complete all as specified and directed.

S&F Mild steel screw bolts diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

S &F for 40 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hardstanding complete all as specified and directed.

M&L Sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. NOTE : Punned thickness only shall be measured.

Supply and laying dry well burnt locally available brick sub class 'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

M&L for drilling through bore hole by trenchless technology without disturbing the existing road or hard surface complete all as specified and directed.

M & L for laying in trenches GI Pipe 25mm dia medium grade including all fittings such as socket tee etc complete all as specified and directed.

M & L for fixing on wall GI Pipe 20 mm dia medium grade including all fittings and fixtures such as socket tee etc complete all as specified and directed.

S&F 20mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for Cutting holes into or through brick walls built in cement mortor superficial area n exc 150 sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

M&L for Point wiring complete with PVC insulated unsheathed 1100 volts grade cable 1.5 Sqmm(nominial area) FRLS having stranded copper conductor single core drawn in and including 20mm dia rigid PVC conduit medium grade ISI marked with all conduit accessories concealed pressed steel terminal box of required size not less than 1.6mm thick factory made duly painted inside and outside with two coats of black bituiminious paint over a coat of red oxide primer, 3mm thick top cover of plastic laminated sheet/required colour for mounting switch socket/fan regulator etc and 1.5 Sqmm PVC insulated unsheathed cable FRLS (having copper conductor) as earth wire connected earth dolly as required complete for the following:-

One light or fan point controlled by one way switch

3 pin 5 Amp socket outlet on independent board complete

S&F switch piano flush button single pole one way 6 Amps, 240 volts complete all as specified and directed.

S&F Socket flush type 5 pin 5 Amps shutter complete all as specified and directed.

S&F Ceiling rose surface bakellite 65x25mm three terminals 240 volts complete all as specified and directed.

M&L for sheet metal enclosure factory made, Double door,4ways, single pole Neutral with 200 Amps rated bus bar for housing MCBs/isolators complete including provn of blanking plate for unused ways complete all as specified and directed.

S & F MCB SP, 6 to 32 Amps single pole 230 volts,10 KA complete all as specified and directed.

S&F MCB SPN 40 Amps, 230 volts complete all as specified and directed.

Supply and fix ultra slim aluminium square profile LED tube light fitting 20/22 watt capacity with all fixing accessaries complete all as specified and directed.

S & F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body, heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper cable 1.5 long fixed on GI bracket complete all as specified and directed.

S&F Heavy duty high speed copper winding exhuast fan, 300mm sweep , single phase 240 Volts complete with louver shutters and all assessories complete all as specified and directed.

M/S JAI DURGA CONSTRUCTION (BID ID -3114549)

Dua Construction (BID ID -3114607)

M/S DEEKSHA CONSTRUCTION (BID ID -3125970)

SHIV SHANKAR MISHRA (BID ID -3116208)