SPECIAL REPAIR TO DILAPIDATED RCC CHAJJA OF JCOS OR MD ACCN BUILDINGS AT MALCOLM LINE AND CERTAIN MINOR WORKS UNDER GE MAINT INF SCHOOL MHOW

Amount

Special repair to dilapidated RCC structures of JCOs /OR Md Accn at Malcolm Line:

Demolition of dilapidated RCC structures (reinforcement cut as required to facilitate demolition) such as in staircases, landing, chajjas, walls, mumties, porchs, parapet wall and similar suspended work etc carefully without damaging the other structure of the building including cutting of reiforcement and plastering the concrete surface with cement mortar 1:3 to match with existing old wall surface complete all as specified and as directed by Engineer-in-Charge. Note : All demolished /dismantled debris items shall be removed from Defence land and deposited outside the MD land all as directed by Engineer-in-Charge

M&L Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified

M&L for rendering 15mm thick in CM (1:4) mixed with liquid WPC on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified. Note :- Water proofing compound shall be measured and paid separately under relevant item

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja etc. complete all as specified.

M&L preparation of new plastered surface of wall and applying two coats of exterior weather proof water base emulsion paint white /coloured over a coat of primer complete all as specified

M&L preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer white or tinted complete all as specified

M&L for applying three coats of white wash on new ceiling,chajja including preparation of surface complete all as specified

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved.

M&L for reparing of RCC roof projection, chajjas,roofs, facia, column etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforecemnt to remove loose rust particles and allow to dry it for 2 to 3 Hours , insert the new reinforcement to damaged portion by drillig hole at required distance , fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement, apply cement slurry on entire damaged area , and plaster the surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : Work shall be carried out to the building to a height of 8 metre and quoted rate shall be inclusive for necessary scafolding and safety devices as required at site . Nothing extra shall be admissible. on this account .

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410 -W (Gde-E- 250) quality-A

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and directed by Engineer-in-Charge

M&L for cutting holes in brick / block walls exceeding half brick but not exceeding one brick built in cement mortar of any description for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required completed all as specified.

M&L for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregates as in copings, Chajja, kerbs, roof padding /staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed .

S&F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

M&L for preparation of new steel and iron surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified

Provision of Interlocking Tiles near bldg No P-34 and CB 371:

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate,100 mm thick as in subbase complete all as specified

M&L for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping including necessary formwork if required complete all as specified and directed.

M&L for stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers not exceeding 25 mm thick

M&L for 60mm thick Machine pressed rubber moulded precast concrete interlocking paver block fixing with grey cement and pigments of " I " shape of any colour and size as approved by GE ,confirming to IS 15658-2006 of M-40 Grade , set , laid over 50 mm (average) thick dust sand cushioning, filling of joints with sand & compaction using surface vibrator after filling of joints laid in any pattern as approved by Engineer-In-Charge including packing of edges /sides with cement concrete finishing surface even and smooth complete all as specified and as directed. Note : Sand cushioning shall be measured and paid separately under relevant item.

Addn/altn to flooring, joinery, sanitary fittings and allied works of bldg No SM-133 (MALL- 78) :

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified

M&L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified..

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in CM (1:4) mixed with WPC on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.Note: WPC shall be measured and paid separately under relevant item.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer white or tinted complete all as specified .

M&L for preparation of old surfaces of wall by scrapping (any No of layers), washing,rubbing down, and stopping of distempered and applying two coats of oil bound distemper white or tinted all as specified.

M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots from plastered or unplastered surfaces including cornices, pilasters etc and applying two coats of white wash complete.

M&L for preparation of new plastered surface of wall and applying two coats of cement based paint over a coat of white wash complete all as specified

M&L for preparation of old plastered surface of wall and applying two coats of cement based paint complete all as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs /blankets, any thickness, including cover fillets complete all as specified

S&F false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns pinhole 8mm thick semi perforated square edge tile having NRC (Noise Reduction coefficient) of 0.50 (minimum) Light reflectance of 85% (minimum). Non combustible as per BS: 476 (PART-4), fire performance as per BS : 476(PART 6 & 7 ), humidity reistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, in true horizontal level suspeded on interlocking metal powder coated T-Grid of hot dipped galvanized iron section on Silhouetter profile, rotary stitched double webbed white with 1 mm reveal profile (White/black), comprising of main-T runner of size 15 x 32mm of length 3000m, cross - T of size 15 x 32 mm of lenght 1200mm and secondary intermediate cross-T of size 15 x 32 mm of lenght 600mm to form grid module of size 600 x 600 mm, from ceiling using galvanized mild steel item, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 19 x 19mm of length 3000 mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall S.S. screws. The work shall carried out as per specifications, drawing and as per directions of the Engineer-in-Charge .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified

M&L for Coloured non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 20mm thick screed in CM(1:6) complete all as specified

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface as in skirting/dado 450X300X7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) including plastic water closet seat, white colour, closed pattern with flat bottom cover and mild steel CP or aluminised hinging device complete all as specified.

S&F in repairs wash hand basin, white colour,vitreous china of size 550mmx400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified

S&F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified

S&F in repair 15 mm dia bore basin mixture brass chromium plated with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. Make :Jaquar/Marc/Plumber

S&F in repair chromium plated brass wall mixer 3-in-1 fancy type including provison for hand shower and over head shower complete with wall flange (without hand & over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed. Make :Jaquar/Marc/Plumber

S & F in repair over head shower with arm & flange of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union complete all as specified and directed Make :Jaquar/Marc/Plumber

S & F in repair 15 mm bore bib taps with wall flange chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. Make :Jaquar/Marc/Plumber

S&F in repairs 15mm dia Bib tap chromioum plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs CP fancy type stop valves ,cast copper alloy concealed type , screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S & F in repairs PVC flushing cistern, low or high level, 10 litres capacity with inlet, ball valve, syphonic action type, float and handle, PVC flush pipe , pull or push type including brackets complete all as specified.

S & F in repairs Angle Stop valve one way, brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm bore complete

S & F in repair brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete all as specified .

S&F in repair fancy type chromium plated two way bib cock of 15mm bore two way bib cock screwed for iron pipe or brass ferrule etc complete all as specified and as directed. Make : Jaquar/ Marc/Plumber

S & F in repair Bidet spray (Health faucet) with 1.20 meter tube and holder, complete all as specified and directed. Make : Plumber/Prayag

S & F in repair CP Toilet paper holder Make : Plumber/Jaquar/Prayag

S&F in repair soap dish (oval) type Stainless Steel chromium plated of size not less than 50mm dia complete. Make : Jaquar/Marc/Plumber

S & F in repair corner shelf of 300 mm size with ABS brackets complete all as specified. Make :Jaquar/Marc/Plumber

S & F in repair PVC bath cabinet box mirror type with shutter complete all as specified. Make :Jaquar/Marc/Plumber

S & F in repair CP Tumbler Holder complete all as specified and directed Make :Jaquar/Marc/Plumber

S&F in repairs shelf glass assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide with CP bracket guard and railing 600mm long.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm

S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified

S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats complete all as specified

S&F in repairs 25 mm dia stainless steel curtain rod including stainless steel decorative brackets at ends with and including necessary fixing arrangements complete all as specified

Taking down steel tubing 15mm bore and connections complete all as specified

S & F GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified

Refixing old steel tubing and connections in new or old position walls,ceiling,floors etc.15mm dia all as specified.Note:Serviceable GI pipe obtained from Ser item No 65 shall be refixed.

Taking down steel tubing 20mm bore and connection complete all as specified

S & F GI tubing 20 mm Bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified

Refixing old steel tubing and connections in new or old position walls,ceiling,floors etc.20mm dia all as specified.Note:Serviceable GI pipe obtained from Ser item No 68 shall be refixed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in Stone/ brick walls complete all as specified

S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) bends any radius 110mm dia

S&F PVC (SWR) bends any radius 75mm dia

S&F PVC junction single (single T) 110mm dia equal or unequal with access door.

S&F PVC junction single (single T) 75mm dia equal or unequal with access door.

S&F 100mm dia stack clamps made out of 50 mm x 5 mm MS flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

S&F 75mm dia stack clamps made out of 50 mm x 5 mm MS flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

M&L in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement

M&L in repair PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement

Dismantling of old sone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified

M&L for Granite (of any type) 18-20mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:6 complete all as sprcified

M&L for Rounding to edges of stone slabs such as granite and kota stone ,one edge such as steps cooking platform and other similar situations complete all as specified and as directed.

M & L 20 -25 mm thick kota stone, machin cut kota stone slab flooring mirror polished over and including 20mm cement screed base laid in CM 1:6 , and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

M & L for Kota stone slab 18 to 20mm thick in riser of steps, skirting, dado and pillar, window cill laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete (mirror polished) over and including 10mm thick backing coat in CM 1:4..

Taking down chowkats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from the frames)

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frames)

Taking down shutters of any description not exceeding 1.0 sqm each complete all as specified

Taking down shutters of any description exceeding 1.0 sqm but not exceeding 2.0 Sqm each complete all as specified

S&F Plain, solid, straight second class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam PVC `C' channel having a prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable prelam PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F second class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed.

S&F 30mm thick factory made, second class hard wood, glazed and skeleton window/ventilator shutters, open repeated and prepared to receive glass,gauze etc (with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

M&L for sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 sqm in each pan complete all as specified

M&L for figured glasspine head type 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 sqm in each pan complete all as specified .

S & F in repair galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified

S & F galvanoised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples,etc complete all as specified

S & F stainless steel butt hinges 100 mm long

S&F 150 mm long Aluminium anodizes barrel tower bolts of extruded section

S&F 150 mm size aluminium anodized handle

S & F in repairs aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified

S&F 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified

M&L for cutting holes in brick / block walls exceeding half brick but not exceeding one brick wall build in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 as required complete as specified.

S & F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, Hold fasts wall ties hooks for hanging fans, plain angle etc all as specified

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel over coat of pink primer.

M&Lfor preparation of old painted wooden surface of any description over 10cm in width or girth and applying one coat of synthetic enamel paint

Dismantling Asbestos corrugated and semi corrugated sheet in roof covering of Plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified

S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as specified and dircted.

S & F Pre-painted galvalum aluminium zinc coating steel based Plain steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering complete all as specified and dircted.

INTERNAL ELECTRIFICATION :

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc . removing materials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately ) and making good distrubed surfaces of walls, floors etc.

M & L for Point wiring using approved colour coding as as per IS in repairs with FRLS PVC insulated and unsheathed electric cable 1100 volts grade single core having multistranded copper conductor of 1.5 Sqmm nominal cross sectional area for phase & neutral, drawn in and including non metallic rigid PVC Conduit Pipe /casing caping not less than 25mm base size with all fitting and fixing accessories and with 1.5 Sqmm green FR LS PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor connected to earth dolly by providing suitable lugs including galvanised/wooden boxes of suitable size with white laminated bakelite sheet/Modular Boxes for mounting switches,sockets etc complete for the followings.

One light/ fan/ bell point controlled by one switch

One 5amps socket out let point controlled by one switch on same board with other switches.

One 5amps socket out let point on independent board controlled by one switch.

All as per item No 114 here in before but using FR LS insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FR LS PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

S&F in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro

S&F in repairs LED warm Bulb 15 Watt

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 m long bend to required shape with clamps, nut, bolts complete all as specified .Make: Cat No ENXT P 36L WH CR PC SD of Bajaj or equivalent make in Philips, Wipro/Havells

S&F in repairs Switch flush type 6 Amps single pole, one way Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F in repairs Switch flush type 6 Amps single pole, one way . Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F in repairs Bell push flush type,6 Amps Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F in repairs Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F in repairs Switch 16 Amps single pole, one way Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F in repairs fan regulator step type, 2 module type Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F hot /cold water Pressure pump set 0.60 HP capacity motor type WJ-202-EM-MOD/C 230 volt ,50 Hz ,40 Amp 1.5 KW motor -IP 44 class B, Maximum Head- -34 metre Make:-wilo

S&F in repairs integrated warm LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro

S&F in repairs LED Warm Bulb 15W including connection with copper cable complete Make: Havells Bajaj or equivalent in Crompton, Wipro

S&F Exhaust fan 300mm sweep, AC single phase 230 Volts, metallic type, complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed surfaces of wall to match with the existing surface of wall complete all as specified and directed Make : Havells Model: Ventil Air-DX white or equivalent in /Bajaj/Crompton.

Chitragupta Construction

M/S Sunshine Construction

SATHI ENTERPRISES

NIDHI CONSTRUCTION