Tender for Interior and Fitout works for Lokpal Of India at A-400 and A-500, World Trade Centre, Nauroji Nagar, New Delhi

BILL OF QUANTITIES (BOQ)

Name of Work: Interior and Fitout work for Lokpal Of India at A-400&A-500, World Trade Centre,Nauroji Nagar, New Delhi

S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)

1 CIVIL & INTERIOR WORKS 1,91,35,236.90 6,53,46,812.04

3 PLUMBING & FIREFIGHTING WORKS 51,74,738.25 22,95,352.36

4 FURNITURE 4,14,43,049.52

TOTAL i/c GST 20,65,15,212.06

Digitally signed by AVDHESH

Name of Work: Interior and Fitout work for Lokpal Of India at A-400&A-500, World Trade Centre,Nauroji Nagar, New Delhi

Summary of Civil and Interior Works

S.No. Description of Works Amount

Amount (SR, in Rs.)

1 Masonry & Plaster

2 Paving & Wet Works

3 Partitions & Wall Cladding

6 Finishes & Miscellaneous

GRAND TOTAL (Carried Forward) 8,44,82,048.94

GRAND TOTAL (Carried Forward) 8,44,82,048.94

Digitally signed by AVDHESH

Name of Work: Interior and Fitout work for Lokpal Of India at A-400&A-500, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

CIVIL & INTERIOR WORKS

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)

2.1 11.3 finished with a floating coat of neat cement, including cement slurry, but excluding the cost of

nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 3,750.00 614.20 23,03,250.00

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 645.00 1,123.80 7,24,851.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of

half brick masonry.

2.4 13.2 CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of mix.

2.5 13.4 12 mm cement plaster of mix

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°

landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair

2.6 5.3 cases up to floor five level excluding the cost of centering, shuttering, finishing and CUM 0.60 11,505.50 6,903.30

reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

2.7 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

2.8 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 12.00 736.40 8,836.80

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 90.00 107.85 9,706.50

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP

2.10 MR Punning over cement plaster in line & plumb finished smooth to receive paint. (Internal surfaces SQM 480.00 300.00 1,44,000.00

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying :

a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound

@ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of

cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This

layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate

includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes

and masonry with polymer mixed slurry.

AAC BLOCK FILLING: Providing and Laying of AAC Block Filling in the Slab Sunk or Raised Areas

as a Back fill or platform. Laying should be done in layers with pounding done at every level to

ensure a proper cavity free installation without disturbing any existing services in the area. Cost

to also include haunching for plumbing pipes.

SUB TOTAL OF MASONRY AND PLASTER 37,25,121.60 2,08,788.00

3 PAVING AND WET WORKS

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in

skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3

coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete.

Digitally signed by AVDHESH

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

3.2 11.41A cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

11.41A.2 Glazed vitrified floor tiles polished finish of size

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming

to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red

Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching

pigments etc., complete.

Grouting the joints of flooring tiles having joints of upto 5 mm width, using epoxy grout mix of

3.4 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per

kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Providing and fixing removable raised/false access flooring with system and its components of

approved make for different plenum height with possible height adjustment upto 50

3.5 11.54 mm,comprising of modular load bearing floor panels supported on G.I. rectangular stinger

framework and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified

and asdirected by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube

of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of

size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size

75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI

Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the

pedestal head in position at the required level. The pedestals shall be fixed to the subfloor

(base) through base plate using epoxy based adhesive of approved make or the machine

screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size

570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal

head using fully threaded screws ensuring maximum lateral stability in all directions, the grid

formed by the pedestal and stringer assembly shall receive the floor panel, this system shall

provide adequate solid, rigid support for access floor panel, the system shall provide a

minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits

and wiring etc. all complete as per the architectural drawings, as specified and as directed by

the Engineer-in-charge

Digitally signed by AVDHESH

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti

static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel

welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical

cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot

welded together (minimum 64 welds in each dome and 20 welds along each flange). The

panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the

top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed

with lightweight foaming compound. The access floor shall be factory finished with Anti-static

High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion

and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs

applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on

four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250

kg/sqm and an impact load of 50kg all complete as per the approved manufacturers

specification and as per the direction of Engineer-in-charge. All specification must be printed on

the side of the panel to ensure the quality of the product.

11.54.1 300 mm Finished Floor Height (FFH) SQM 50.00 5,623.95 2,81,197.50

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and toilets with Granite

stone top (with straight edge polished nosing) complete with base cabinet made of 20mm

BWP board, outside surface (shutters) finished in 1mm thick Laminate of approved shade. All

3.6 MR internal surfaces to have balancing laminate. The rate inclusive of necessary hardware, handle RMT 2.00 12,364.00 24,728.00

lock sets, self closing hinges, spring loaded shutter, latch inside, all cabinet hardware complete

as per Architects approval. (BR of stone to be taken as Rs 1600/Sqmt). Width of work top

counter 600mm/ detailed drawings.

Supply of modular carpet of approved model and shade and made with 100% nylon 6/6.6

tufted textured tiles of minimum 500mm x 500mm in size, stain resistant, anti microbial, and

having colour fastness to water, fastness to light, rubbing fastness and castor chair suitability as

per relevant standard for heavy commercial usage, with 100% PVC free Backing with having

3.7 MR average density 6000 oz/cu. yd. or more,Nominal total thickness of 5.9mm, and Pile weight – 16- SQM 120.00 2,113.00 2,53,560.00

18 oz/ sq yard. Material shall be CRI GREEN LABEL PLUS certified, and shall have recycled

content complying to GRIHA requirement, including fixing with GRIHA compliant adhesive of

approved make, minimum 15 years manufacturer's warrantee, all complete as per drawings,

manufacturer's specifications and direction of Engineer in Charge

Providing and Fixing of 15mm thick Engineered Woooden Flooring with plank width of

135/185mm and length of 1800/2100mm and top layer up to 3mm in approved finish. Surface

of Top layer shall be pre finished with several layer of UV hardened Acrylic lacquer. The product

shall be Free from Formaldehyde and solvents. Flooring plank shall be interlocked using Plank

locking system in a glue less floating manner. Engineered wood planks shall be a composition

of 3 layer of Pine wood with direction of each layer oriented at right angle to the adjacent layer

of natural strain in Lacquer and Beveled in length and width as specified by the manufacturer-in-

charge. Product shall be MAKE IN INDIA. The cost to include providing and fixing of all

acessories i.e Skirting, beading, profile etc. and Underlay 2mm PE foam and polythene combo

with 40 Micron complete as required.

TOTAL FOR PAVING & WET WORKS 58,65,146.70 78,38,228.00

4 PARTITIONS AND WALL CLADDING

Digitally signed by AVDHESH

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling height consisting of G.I.

frame and required board, including providing and fixing of frame work made of special

section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side

inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm

and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with

dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws

4.1 9.105 with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36

mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at

a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs

along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with

nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame

work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300

mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid through cracks,

M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be

provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head

screws, including jointing and finishing to a flush finish with recommended jointing compound,

jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats

of primer suitable for board as per manufacture's specification and direction of engineer in

charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced

Gypsum (GRG) plaster board conforming to IS: 2095:

Gypsum Panelling:-Providing and fixing, in position concealed G.I. section for wall paneling

using board of required thickness fixed on the ‘W’ profile (0.55 mm thick ) having a knurled

web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm

C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with

thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the

ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws.

Board is fixed to the ‘W’ profile with 25 mm countersunk ribbed head screws @ 200 mm C/C.,

all complete as per the drawing & directions of engineer-incharge, the joints of the boards are

finished with specially formulated jointing compound and 48 mm wide jointing tape to provide

seamless finish.

9.133.3 Gypsum board conforming to IS: 2095 Part - I

GLASS PARTITIONING:- Providing & Fixing Full Height Glass partition using 12mm Thk. Glass with

anodised Aluminium frame fixing glass with snap on option consisting of top, bottom and side

frame measuring 40-46mm x 18mm-26mm complete with glazing rubber as per manufacturer's

specifications and instructions of Engineer- in-charge. Rate include supply & Installation of 12

mm thk toughened glass with double sided adhesive tapes for glass to glass butt joints. Partition

system from FFL to False Ceiling level, inclusive of cost of support required for fixing in the

ceiling. The frame to be powder coated in desired shade as per the instructions of the

PARTITIONING - Partition using 12mm thick HDHMR fixed on both sides on aluminium Studs Frame

50mm x 50mm x 1.5mm & 50mm x 60mm x 1.5mm as per approved sample and architectural

4.4 MR drawings placing the same 600mm c/c. Aluminuim frame to be fixed to floor and RCC Ceiling SQM 1,810.00 4,842.00 87,64,020.00

using fastners. The cost to include finishing visible edges with 12mm thick mdf strip as per detail

PANELLING- Panelling using 12mm thick HDHMR fixed on one side on Aluminium Frame 50mm x

4.5 MR 25mm x 1.5mm as per approved sample and architectural drawings. Aluminium frame to be SQM 1,870.00 2,491.00 46,58,170.00

fixed to walls, floor and RCC Ceiling using fastners.

4.6 MR Cladding using 12mm thick fire rated plywood on existing frame/ surface. SQM 80.00 1,514.00 1,21,120.00

VEENER CLADDING- Providing and Fixing 4.0 mm thick decorative/ Natural Veneer of approved

design and shade, cladded on to existing partitioning. (base rate Rs. 1450/- sqm)

Digitally signed by AVDHESH

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Polishing in high gloss/matt finish melamine clear polish on wood work in required

color/wooden shade texture with following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper

of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying

time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to

remove excess sealer layer and make the surface further smooth after this wet rubbing, then

surface is applied with special grade melamine fillers to fill all the small and big holes/grooves

etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this

surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish

and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this

dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final

melamine polish is applied with compressor pressure spray gun using melamine clear polish and

melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge.

(Final coat to be done in 1 or 2 layers without gap of time.)

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing

Plywood surface.

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to

IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to

wall wirh screw, rawel plug & washers and held and in position by criss cossing GI wire etc.

complete as per directions of Engineer-in-Charge.

Providing and Fixing Channeled Woodworks perforated panels of width 192mm, thickness of

15mm and length 2400 mm or as specified by the Architect/ approving engineer, made of a

high density fibre board with minimum 725 Kg/M3 density substrate with a laminated facing as

per the approved shade & finish and a melamine balancing layer on the reverse side. The

boards shall have a special perforation pattern where the visible surface has a “Helmholtz”

fluted perforation of 3mm width and 5mm/13mm/21mm of visible panel each. The edges of the

panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the

perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.52-

0.63. The panels shall be mounted on special aluminium splines using clips. The works to be

done complete as per drawings and satisfaction of engineer-in-charge.

Providing and supplying Acoustical Wall Paneling with square edges made of fibre glass

substrate 9 mm thick and wrapped on the front side with an acoustically transparent and

classified for Fire reaction Class A as per ASTM E-84, fabric as per the selection of the Architect of

approved size providing a minimum sound absorption level of 0.85 NRC to be affixed to wall

using Wall panel impalers and construction adhesives as per the instructions laid down by the

particle board 9.18

marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to

12823 marked, exterior

9.129grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, includingSQM IInd class

teak wood lipping

of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano

4.14 Providing and fixing of teak wood moulding/ cornice of following sizes

LAMINATED STORAGE CABINET FOR GENERAL STORAGE- Out of 19mm Commecial Ply Board

finished using 1mm thick laminate. The storage shall be complete with all hinges, drawer glides

and hardware from approved make. All internal surfaces to be completed using balancing

laminate. Including brass D-type handles for shutters and recessed type handles for drawers.

Storage to be of all heights as per design. Storage shutters to be made in solid laminate/ glass

as per design and drawings.

Digitally signed by AVDHESH

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

VENEER STORAGE CABINET FOR GENERAL STORAGE- Out of 19mm Commecial Ply Board finished

using 4mm thick veneer and polished in melamine to match the veneer cladding item. The

venner to be same as the venner cladding under separate sub- head above complete with all

4.15 M.R. hinges, drawer glides and hardware from Hettich or equivalent. All internal surfaces to be SQM 18.00 15,847.00 2,85,246.00

completed using balancing laminate. Including brass D-type handles for shutters and recessed

type handles for drawers. Storage to be of all heights as per design. Storage shutters to be

made in solid veneer/ glass as per design and drawings.

STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS- Cabinet Shutters out of

19mm Commercial Plybaord finished in 1mm Laminate. Shutters to be fixed to a frame. Rigidly

fixed on both sides and top finshed in laminate. No internal carcass required. All Hinges of

hettich or equivalent. Internal Surface of the shutter in balancing white laminate. All shutters to

be provided with Stainless steel louvers at the top and bottom of the shutter as per the site

requirements and instrcution of the Engineer In charge.

SUB TOTAL OF PARTITIONS AND WALL CLADDING 70,50,884.75 2,72,91,715.00

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle

cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre

to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm

dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length

5.1 12.45 with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each

having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular

to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.

wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having

flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as

per manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding

the cost of painting with :

a) 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 1,275.00 1,355.80 17,28,645.00

Providing and fixing suspended Stratopanel, Size 1200X2500X12.5mm round random

perforation G8/15/20 with 9.9% perforation, NRC upto 0.55 : Round rectangular perforation of

glass-fibre reinforced gypsum material, which includes providing and fixing GI perimeter

channels of size 0.55 mm. Thk. having one flange of 20 mm and another flange of 30 mm and

web of 27 mm along the perimeter of the ceiling, screw fixed to brick wall/ partition with help of

nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of size

45 mm,0.9mm thk with two flanges of 15 mm each from the soffit at 900 mm centers with ceiling

angle of width 25mm x 10mm x 0.55mm thk fixed to soffit with GI cleat and steel expansion

fasteners. Ceiling section of 0.55 mm thk having web of 51.5mm & two flanges of 26mm each

with lips of 10.5mm are fixed to the intermediate channels with help of connecting clips and in

direction perpendicular to the intermediate channel with centers of 333 mm perforated

gypboard is then screw fixed to ceiling section with 25 mm dry wall screws at 300 mm centers

to G.I. framing in perfect level. Screw fixing is done mechanically either with screw driver or

drilling machine with suitable attachment. Finally the boards are to be joined and finished so as

to have a flush look with uniflot. The false ceiling surfaces shall be prepared to the satisfaction

Digitally signed by AVDHESH

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Providing and fixing suspended Demountable acoustic ceiling in recessed grid system -600 x

600 x12.5mm with round 4mm holes, c/c 10 mm with upto 0.8 NRC. The item to include all

required accessories complete and shall have the following minimum specifications.

Material: Perforated plasterboard

Board type: Ceiling tile

Length x width x thickness: 600X600X12.5mm

Edge: E+, recessed grid system ( 8mm recess)

Perforation: Round 4mm

Surface: Water-based acrylic paint

Colour: White NCS 0701 Y24R, RAL 9003; gloss 5

Attachment: 15 or Silhoutte T-grid system

Edge section: 20x24 mm angled profile, 15+15 x 8+25 mm cornice moulding

Suspension: Recessed grid system

• Distance between hangers ≤ 1200mm

• Distance from wall to first hanger in direction of load - bearing section ≤ 400mm

• Distance between load bearing sections ≤ 1200 mm.

• Distance from wall to first load - bearing section ≤ 600 mm

• Sub-division executed with cross - sections length 1200 and 600 mm

• Screw spacing for attachment of edge sections length 1200 and 600 mm

• Light sockets of upto 3.0 kg can be integrated directly into the ceiling tiles. In the case of

heavier fittings, load must be taken up directly by the concrete deck or via the grid systemand

Fire rating: A2-s1,d0

5.4 300MM X 1200MM MINERAL FIBRE GRID - Providing and fixing of mineral fiber ceiling tiles, with

hot dipped galvanized steel grid work (Silhotte) , surface chemically cleaned capping pre-

finished in baked polyester paint, Main Tees of size 38 (H) x 15 mm every 1.2M centre to centre,

centre to centre to form a grid of size 1200 X 300 mm and suspending the grid from RCC roof

using 3 mm GI rod, 6 mm nylon rawl plug and 6mm J bolt at every 1200 mm intervals. And

laying mineral fiber Acoustic ceiling tiles MV B-Pin of size 1200 x 300 x 20 OCR mm over the

formed grid having fire rating of 60 minutes as per BS 47G / 23 of 1987. Light Reflection of >

85%. Noise Reduction Coefficient (NRC) of 0.70, Sound Attenuation of 32 db, K = 0.52-0.57

W/mk. Humidity Resistance up to 99% at 50’C. The grid to be used is Silhoutte type as per

approval of the architect

TRAP DOOR :- Providing and fixing trap door in false ceiling made of "pre-laminated board

5.5 MR with hardwood framing, dead locks, lapping all around including all hardware, hinges etc. SQM 22.00 3,005.00 66,110.00

complete as per design and drawing.

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made

hardwood framings hung from ceiling @1000mm centre to centre with 2 nos of 6mm thk.

Commercial ply on vertical & 12mm thk. Commercial ply on horizontal surface (straight &

curved). Inclusive of finishing in Paint.

WOODEN VENEER CEILING :- Providing and fixing wooden veneer ceiling by Fixing Natural Teak

Veneer on 12mm Underlay commercial Ply fixed to a subframe made using 50mm X 50mm Kiln

seasoned and chmeically treated hollock wood fixed to RCC ceiilng using Fastners complete as

per the instructions of the Engineer In Charge. (base rate of veneer Rs. 1450/- sqm)

Providing the gypsum double sided cove of 150mm x 150mm having a facia of 75mm to

macth the specifications same as gypsum ceiling.

Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm to macth

the specifications same as gypsum ceiling.

Providing the wooden cove of 150mm x 150mm having a facia of 75mm to match the

5.10 MR specifications same as above. The cove shall be cladded including the cost of cladding 4 mm RMT 220.00 3,153.00 6,93,660.00

decorated veneer (BR = Rs. 1450/- per sqm) and melamine polish.

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral fibre/

gypsum ceiling. In order to make the Mineral Fiber/ gypsum ceiling higher than the Gypsum

Ceiling by upto 100mm as per drawings. (visible surface of gypsum band to not exceed

100mm) including plastic emulsion paint. Digitally signed by AVDHESH

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Providing and fixing of Triangular Box ceiling of approved manufactured from light weight G.I

and folded into u shape profiles. Each panel has a nominal cell wall thickness of 15 mm to give

a precise engineeredceiling appearance. It has a width of 15mm and height 60mm. Maximum

length available is 2 mtr and its thickness 0.45 in G.I. It has equilateral triangles having each side

length 175mm. It allows fire detection and controlsystem, air conditioning and other services to

be located within the ceiling void. all complete as approved & directed by Engineerin-Charge.

Providing of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm

Height) U Shape panels in wooden finish. Panels shall be made of 0.5 mm thick galvanized steel

after Powder-coated and length up to 4000 mm. Panel shall be high corrosion resistance and

good color stability. Centre to Centre panel gap will be 100 mm. Panels are fixed on to roll

formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with

5.13 MR cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are SQM 400.00 9,126.00 36,50,400.00

suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special

height adjustment suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’

hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to maximum 4.0

m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges

Supply and installation of Linear Ceiling Baffle System. The system comprises non-perforated

baffles fixed randomly in 30,40, 60, 80mm wide & 40, 60, 80, 100mm Deep, installed at 40mm

clear gap between the baffles. The baffles are Non Perforated. The carrier rails run

perpendicular to the baffles. Individual baffle lengths between 300 and 2800 mm can be

selected. Baffle panels are supplied with the end cap matching the similar finish of baffle.

Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2015 approved

by SIS. Substructure for Vertical baffle system consisting of customised clamps, ‘L’ cleats and

5.14 substructure installed/clamped perpendicularly to baffles at the suitable centres using special sqm 140.00 13,205.00 18,48,700.00

counter sunk screws/fasteners. The entire module shall be fixed on the dry/ Ply wall by officially

approved fasteners as per the requirements of DIN EN 13964 and the statics of the system.

Ensure vertical and flush alignment during installation. Baffle Sizes: 100x30, 60x40, 80x60,

40x80mm Baffle width: 30,40, 60, 80mm Baffle height: 40, 60, 80, 100mm Individual baffle

lengths: Min.300/ Max. 2400mm Module: Randomly arranged in 40mm Clear gap between the

baffles Material: Folded GMS 0.5mm Thickness Perforation: Non-Perforated Sound Absorption:

Providing and laying Ceiling type 75mm wide to 225 mm wide panels abutting each other with

a narrow groove made out of 0.50mm thk. GI sheet. Installation: Panel Carriers of 32mm wide,

39mm deep made out of 0.5mm galvanised steel, with prongs to hold panel in a module of

multile of 25mm. Suspension: By means of G.I. rod hangers and suspension clips. Panel Span:

1.3m max. with insulation, 1.5m max. without insulation. Carrier Span: 1.3m max. spacing of

suspension rods. Coil Coated: Panels will be finish-on 'exposed side with 20 microns polyster

coil. Powder Coated: Panels will be finished on the exposed side with 50 microns epoxy

polyester powder paint as per Architect approval.

PET BAFFLES: Providing and fixing baffles in suggested cross section in upto 200 mm depth or as

approved by Engineer in charge fabricated with upto 150 mm wide in box/U Section 9mm thk

PET in design and CNC cut profile as per the instructions of the Engineer in charge .Cost to

include upto 100 mm spacing hung from Existing Ceiling and Slab in Colour and Profile as

5.17 MR designed by Engineer in charge, cost to include Clutch wire / M6 threaded rod or approved SQM 80.00 5,209.00 4,16,720.00

hangers with suspension height void minimum 150 mm. Installation to be done as per the

manufacturers proprietary Specs according the Ceiling Design of the Engineer in charge. Shop

Drawing of formation pattern to be furnished by contractor for approval of the Engineer in

SUB TOTAL OF CEILING 17,28,645.00 1,76,79,185.00

6 DOORS/ WINDOWS

Digitally signed by AVDHESH

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

35MM THICK LAMINATED FLUSH DOOR WITH FLOOR SPRING- 35mm thick flush Doors finished

using 4mm Thick veneer on both sides panel of size upto 2400mm x 1050mm complete with

MR Hardware including floor spring, Door Closer, dead Lock with inbuilt key, 800mm D-Handle etc. Nos 27.00 35,054.00 9,46,458.00

including cost of teak lipping all around. All surfaces to be finished in melamine polish as per

approval. The item to include installation of all kinds of latches as per the requirement.

6.2 STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door Frame

formed out of 45* 40mm / 50*50mm of 6063-T6 Virgin grade duly Anodized Aluminium,

including 10 mm Toughened Glass. The cost to include hardware like Door Closure, 4nos

Hinges, Lever Handle with mortice lock, Door Seal & Gaskets etc. in approved shade and

design as per architectural drawings and instructions of the architect. The size of door shall be

upto 1050mm X 2400mm.

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory windows and

6.3 9.1 other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of

required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood CUM 2.20 1,42,949.70 3,14,489.34

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter

6.4 9.53 bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 EACH 96.00 228.85 21,969.60

mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

LAMINATED FLUSH DOOR- Flush Doors finished using 1mm Thick Laminate on both sides panel of

size upto 2400mm x 1000mm complete with Hardware including hinges, Door Closer, Mortice

Lock with Handle, latches etc. including cost of Door frame with melamine/ duco finish. The cost

to include providing and fixing of vision panel as per design.

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper with

necessary screws, etc. complete.

FIRE DOOR- Providing and fixing single leaf 120min Rated Fire Door of size 1050x2400. with

vision panel using wired glass complete with Fire proof door frame. One side to be finished in

6.7 MR fire retardant paint and one side to be finished in Laminate of approved shade. All Frame to be EACH 5.00 30,181.83 1,50,909.16

finished in fire retardant paint. All hinges and hardware to be thermatically sealed and 120 mins

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand

and manufacture, including providing and fixing top & bottom pivot & spring type fixing

arrangement and making necessary holes etc. for fixing required door fittings, all complete as

per direction of Engineer-in-charge.

SUB TOTAL OF DOORS 3,60,797.85 44,27,325.00

7 FINISHES & MISCELLANEOUS

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per

manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special

primer applied @ 0.75 ltr /10 sqm

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 15.00 172.60 2,589.00

Painting with synthetic enamel paint of approved brand and manufacture to give an even

13.61.1 Two or more coats on new work SQM 30.00 155.90 4,677.00

Providing & fixing decorative Poly décor fabric Wall Paper (on walls and ceiling) of weight

7.4 MR 475 g /sqm as per approved shade & design including prepration of surface with 2 coats of SQM 80.00 4,518.28 3,61,462.07

Nubin Glue based epoxy quote.

Digitally signed by AVDHESH

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

ZEBRA BLINDS - Providing and fixing of Blinds in band width 7.5 cm - 12 cm and made up of

100% polyster, in width of 250 - 280 cm, weight - 160g/sqm - 190g/sqm, thickness - 0.50 mm -

0.70mm ( opaue part ), Colorfastness to light - above 4 grade. Blind tube made of aluminium

with a diameter of 36mm, botom rail made of aluminum with powder coated having weight

390 gm/meter fitted with end caps in colour matching to the fabric and mechanism of plastic

with chain and metal bracket. The blind shall have aluminum cover with the matching fabric

designed on it. Aluminium profile should have temper WP consisting of alloy 63400 along with

anodizing of 10 micron and powder coating of 60 micron. The tensile strength of profile should

be 9.10 Kg/mm square and elongation 18.The control clutch drive unit engineered heavy duty

chain drive pulley operating system consisting of gear clutch housing and locking plug

7.5 M.R. containing minimum 6 ribs and inserted at minimum of 38mm into roller tube. Self-lubricating SQM 752.00 3,508.72 26,38,560.16

exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick

manual removal. It shall be driven by a ball chain pulley with ball chain and can be positioned

at Right hand or Left hand side of the shade. Clutch gear ratio of 1.75:1 for reduced operating

force on larger blinds. Mounting hardware brackets universal brackets including end plug

bracket with lock down retainer device. Brackets finish of powder coated metal installation

brackets made of stamped and hardened steel. Roller tube circular-shaped aluminium tube

extruded from alloy 63400 and temper WP. Bottom rail flat-shaped extruded aluminium from

alloy 63400 and temper WP. Ball chain shall be 2mm diameter cord with plastic balls moulded

to form an endless ball chain used for raising or lowering action of the shades. All plastic

components must be UV-stable - white in colour.

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with 15 yrs

7.6 M.R. MCS warranty as approval of the Architect. (Only film surface area shall be measured and SQM 241.00 2,012.04 4,84,902.78

Supply, installation, testing and commissioning of switchable self adhesive smart film with 90%

transparency. Film should be controlled by remote control technology having maximum width

1800mm. Colour of the film to be milky white for maximum transparency with UV blockage no

less than 98%.Measurement from edge to edge of partition/door section.

Providing and fixing of custom made running sofa as per detail drawings. All visible surface to

be cladded with 4mm thick decorative veneer. The sofa to have 75mm-100mm thick cushion

on seat and back. Intermidiate arm rest to be provided. The cost to include melamine polish,

making cut out of electrical boxes, etc. complete as per satisfaction of engineer-in-charge.

Providing and fixing of custom made running sofa as per detail drawings. All visible surface to

be cladded with 1mm thick decorative laminate as per approval. The sofa to have 75mm-

7.8 M.R. 100mm thick cushion on seat and back. Intermidiate arm rest to be provided. The cost to rmt 45.00 10,000.00 4,50,000.00

include making cut out of electrical boxes, etc. complete as per satisfaction of engineer-in-

Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered glass manufactured

industrially by curtain coating process with PU lacquer (50 micron thick), opaque (if viewed

against a support wall) conforming to EN 16477 standards for back painted glass , of

approved color by Architect/ Client fixed with compatible Silicone having Shear Bond Strength

(Dry, 24 hours), greater than 450 kpa and tack free time of 10 to 30 mins compatible for

installation of mirror and lacquered glass / Foam based double sided adhesive tape for

instantaneous adhesion, compatible with mirror and lacquered glass having Shear bond

7.9 M.R. strength (Dry, 15 mins) of 250 to 350 kpa) on a perfectly leveled 12mm thick water proof Nos. 30.00 3,953.49 1,18,604.74

marine plywood / MDF / Mineral fibre board which is mounted on the RCC wall/any other

structure. The contractor should submit test reports for backpainted glass from manufacturer -

High humidity Resistance (conforms to BS EN 1036 1999); Color fastness ISO 105B02 standard &

Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 ( Cross Hatch Test ) standard

The manufactured backpainted glass should be environmentally friendly (no lead, no arsenic,

no copper, noformaldehyde); appropriate recycled content (12% post industrial / 6% post

consumer); compressive strenght (1000 MPa) & tensile strenght (40 MPa),same as float glass

Digitally signed by AVDHESH

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved make and colour using

approved Adhesive to 12 mm thk. Waterproof Plywood of approved brand as per shape,

7.10 M.R. pattern & details given in the drawing. The rate includes providing & fixing beading, cutting, SQM 8.00 15,955.16 1,27,641.29

scaffolding, nails, all materials, labour, lead, lifts, HOM etc., complete.-for Lift Cladding. (The

make, Shade, pattern etc., to be approved by EIC).

SUB TOTAL OF FINISHES 4,04,641.00 79,01,571.05

Digitally signed by AVDHESH

Name of Work: Interior and Fitout work for Lokpal Of India at A-400&A-500, World Trade Centre,Nauroji Nagar, New Delhi

BOQ FOR FURNITURE

S.No. Specification Qty. unit Amount

1 Reception Table

Dimension(L) 2000mm X (D) 750mmX (H) 750mm (all over ht 1050mm) 1.00 nos 2,03,126.63 2,03,126.63

Dimension(L) 3000mm X (D) 750mmX (H) 750mm (all over ht 1050mm) 1.00 nos 3,04,689.40 3,04,689.40

Supplying, and placing in position of reception Table as per Image/drawing in engineered wood.Table top

made of 25mm thick HDHMR board with both sides laminated, side panel's made of 18mm thick Laminated

HDHMR board . Combination construction of reception desk above table top 18 mm thick. Counter top to table

top height @ 300mm, overall reception desk height is @ 1050mm with counter top, table top made of 25 mm

thick Laminated HDHMR board work surface with the exposed edges finished with 2mm thick pvc edge binding

tape of matching colour and shade fixed with hot melt glue. Along with 18mm thk HDHMR additional modesty

panel of size 1350 mm (l) x 700 mm (h).1 mobile pedestal (2 drawers + 1 filing cabinet) of size 450 mm (l) x 450

mm (d) x 725 mm (h) provided with central lock's for security and handles provided for easy opening &

pedestal's move on nylon castors. The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification. The product should be as per above given

specification subject to approval of Engineer in charge.

2 Medium back Chair for Reception & waiting area 2.00 nos 17,630.00 35,260.00

Supplying and placing Medium Back chair as per image (for reference only) with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

Pneumaticallu adjustable Seat height. Standard range of adjustability - 120mm, from 420mm H – 540mm H. Seat depth

adjustability 55mm (429mm to 487mm) . Lumbar height adjustable upto 60mm. Should have dual wheels that roll smoothly on

carpets with 65mm for increased mobility.

SCSIAQ Gold Certified. BIFMA certified

3 Sofa for Reception & Waiting area

3 seater Dimension (L)1905mm X (D)890mm X (H)870mm 4.00 nos 71,380.00 2,85,520.00

2 seater Dimension (L)1410mm X (D)890mm X (H)870mm 4.00 nos 56,330.00 2,25,320.00

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves. . The

Sofa stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa. Each

curve defines a seating space which provides for people to be seated comfortably. Finished in a Brown

Leatherette or available colours as may be approved. The Cushioning is molded such that it flows along the

partition for a clean unified look. First Grade Teak Wood solid wood for framing construction of sofa. The seat

cushion is made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of

elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of

28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft.

The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/

AIOTA Certification.The productshould be as per above given specification subject to approval of EIC

4 Center table for Reception & waiting area

Dimension (L)1130mm X (W)630mm X (H)410mm 4.00 nos 33,110.00 1,32,440.00

Supplying and placing in position of centre table as per photograph (only for reference). The centre table made

of solid wood (First Grade Teak Wood) in PU matte polish. Toughened Glass Top 8mm thk. The turned wooden

legs are sleek and sturdy providing the table with its support. The wood work below the Toughened Glass

provides a focal point and some support. Material & subtype: Solid Wood -Beech Wood( spc:steam beach),

Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular Legs/Base:Solid Wood,

Finish:Glossy,Style:Contemporary. The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The productshould be as per above given

specification subject to approval of EIC

5 Side table for Reception & waiting area

Dimension(L)680mm X (W)530mm X (H)450mm 8.00 nos 25,800.00 2,06,400.00

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying, and placing in position of side table as per Image.The side table made of solid wood (First Grade

Teak Wood) in PU matte polish.The Toughened Toughened Glass placed on the top of the table is 8mm thk. The

Toughened Glass table top is made with strong Toughened Glass and is inlaid onto the solid wood frame. The

designer wooden legs are turned for a sleeker look. The framed edges slope inwards to the table top with

defined edges. Material & Subtype:Solid Wood - Beech Wood ( spc:steam beach), Colour & Colour

Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy, Style:Contemporary. The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The

productshould be as per above given specification subject to approval of EIC

6 Main Table for Type-4 (Prosecution wing/ Finance wing/ I.T Division)

Main Table Dimesnion: (L)2300mm X (D)900mm X (H)750mm 5.00 nos 1,61,035.00 8,05,175.00

All over Side Runner Dimension: (L)1940mm X (D)450mm X (H)650mm

Supplying, and placing in position of a straight line table with wire manager as perphotograph (only for

reference)/drawing. The main desk of size 2100mm (L) X 900mm (D) X 750mm (H) shall be made out of 42mm

thick Laminated HDHMR board with laminates of approved shade. Table top supported with side panels and

modesty panel. The side panels made out of 42mm thick Laminated HDHMR board & modesty panel made

out of 36mm thk Laminated HDHMR board with laminate of approved shade. All working or non working edges

shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue. Provision of Pop-up

- cable manager box in the table .The Fixed Side Runner attached to the table of all over size 1940mm (L) x

450mm (D) x 650mm (H) has a provision for three drawer with locking facility , two openable shutters with

locking arrangement , open storage with shelf & one open storage for cpu.The another side panel of table top

having a provision of two attached drawer as perphotograph (only for reference). The table top rest on SS studs

for design purpose same as per image.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The productshould be as per above given

specification subject to approval of EIC

7 Back Storage for Type-4 (Prosecution wing/ Finance wing/ I.T Division)

Supplying, and placing in position of Low height storage @ 750mm height as perphotograph (only for

reference)/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top

shall be made from 18 mm thick Laminated HDHMR board with laminate of approved shade and rest of the

sides as well as shelves and shutter to be made up of 18 mm thick Laminated HDHMR board with laminate of

approved shade while back to be made of 8 mm thick Laminated HDHMR board with laminate of approved

shade. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD

shape handles & locking arrangement.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The productshould be as per above given

specification subject to approval of EIC

8 Main Chair for Type-4 (Prosecution wing/ Finance wing/ I.T Division) 5.00 nos 39,560.00 1,97,800.00

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supply and Placing chairs with headrest as per image (for reference only).

•Chairs shall meet or exceed all ANSI/BIFMA Certification•Overall depth shall be 533mm (21”) to 603mm (23-

•Overall width shall be 597mm (23-1/2”) to 685.8mm ( 27“). Height Chairs: 927mm (36-1/2”) to 1047.8mm (41-

1/4”). •Backrest height from seat shall be a minimum of 546mm (21-1/2”).

•Backrest width shall be a minimum of 438mm (17-1/4”) at narrowest point. • Back tension and recline control

knob required. Adjustable lumbar height adjustment range of 57mm (2-1/4”) from 165mm (6-1/2”) to 222.3mm

•A pneumatic mechanism to accomplish minimum (5”) seat height adjustment range between 16-1/2”-21-1/2”

•Seat shall include a 57mm (2-1/4”) seat depth adjustment

•Seat pan angle shall be 2º to keep the user's torso-thigh angle greater than 90º .Two independently adjustable

arm options shall be available Height-, Width-, Pivot-, Depth-Adjustable (HWPD)•Base shall be a five-star

base with a minimum dimension of 667mm (26-1/4”).

9 Visitor Chair for Type-4 (Prosecution wing/ Finance wing/ I.T Division) 15.00 nos 38,270.00 5,74,050.00

Supply and Placing chair as per image (for reference only).

•Chairs shall meet or exceed all ANSI/BIFMA Certification• Overall depth shall be 533mm (21”) to 603mm (23-3/4”)

•Overall width shall be 597mm (23-1/2”) to 685.8mm ( 27“). Height Chairs: 927mm (36-1/2”) to 1047.8mm (41-1/4”). •Backrest

height from seat shall be a minimum of 546mm (21-1/2”).

•Backrest width shall be a minimum of 438mm (17-1/4”) at narrowest point. • Back tension and recline control knob required.

Adjustable lumbar shall offer a height adjustment range of 57mm (2-1/4”) from 165mm (6-1/2”) to 222.3mm (8-3/4”).

•A pneumatic mechanism to accomplish a 127mm (5”) seat height adjustment range between 16-1/2”-21-1/2” •Seat shall

include a 57mm (2-1/4”) seat depth adjustment within a range of 15-1/2” to 17-3/4”

•Seat pan angle shall be 2º to keep the user's torso-thigh angle greater than 90º •Seat shall not have hard edges which can

create pressure points that lead to discomfort.•Base shall be a five-star base with a minimum dimension of 667mm (26-1/4”).

10 Sofa for Type-4 (Prosecution wing/ Finance wing/ I.T Division)

3 seater Dimension:1940mm (L) x880mm (D) x 950mm (H) 5.00 nos 85,570.00 4,27,850.00

1 seater Dimension: 965mm (L) x880mm (D) x 950mm (H) 5.00 nos 47,730.00 2,38,650.00

Supplying and placing in position of exclusive premium leatherette modernist classic design lounge seating sofa

with kiln-dried wood framing, warp and scratch resistant, comfortable seat depth & height designed keeping

modern indian lifestyle in mind, wrapped in premium leatherette, with panelled back and cushioned armrests

designed with modernity & elegance. Moisture content shall be less than (10-12) %. Thickness of plywood used

(mm) shall be 12 mm grade IS303 Indian standard for commercial (common) and moisture proof plywood

.under structure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing . The

complete structure shall be covered by PU foam fixed with adhesive glue, the frame shall be padded with high

resilience polyurethane foam having 40 +/- 5 density in seat it shall be stack foam of 50mm thik, 50mm thick

back foam having 40 +/- 5 density foam used, there shall be cushion arm 50mm thick provided padded with

high resilience polyurethane foam having density 40 +/- 5. the complete stack foam structure shall be covered

with premium leatherette in brown-eerie black, beige-pebble beige, brown-burnt umber colour or as approved

by EIC, legs made of round shape in pvc material.( seat : 510 mm(d) x 460mm(h) , back height @ 550mm ).The

product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA

Certification.The product should be as per above given specification subject to approval of EIC

11 Center Table for Type-4 (Prosecution wing/ Finance wing/ I.T Division)

Dimension (L)1130mm X (W)630mm X (H)410mm 5.00 nos 33,110.00 1,65,550.00

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying and placing in position of centre table as perphotograph (only for reference). The centre table made

of solid wood (First Grade Teak Wood) in PU matte polish.The Toughened Toughened Glass placed the top of

the table in 8mm thk. The turned wooden legs are sleek and sturdy providing the table with its support. The

wood work below the Toughened Glass provides the Toughened Glass with a focal point and some support. .

Material & subtype: Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark

Oak,Shape:Rectangular Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

12 Side Table for Type-4 (Prosecution wing/ Finance wing/ I.T Division)

Dimension(L)680mm X (W)530mm X (H)450mm 5.00 nos 25,800.00 1,29,000.00

Supplying, and placing in position of side table as per Image.The side table made of solid wood (First Grade

Teak Wood) in PU matte polish.The Toughened Glass placed the top of the table is 8mm thk. The Toughened

Glass table top is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN

PRO Certification/ AIOTA Certification.The product should be as per above given specification subject to

approval of EIC

13 Main Table for Secretary Cabin

Main Table Dimension:(L)2400mm X (D)1130mm X (H)770mm 1.00 nos 3,10,890.00 3,10,890.00

Side Runner Dimension: :(L)1200mm X (D)600mm X (H)770mm 0.00 0.00

Supplying, and placing in position of table as per photograph (only for reference). Made of engineered wood-

medium density fibre board & veneer glossy finish on the same. The modesty frame of the table shall be with

panel upholstered wth PVC material for a leatheratte look. Main Table top thkness 80mm , side panel/gable end

in 70mm thk mdf with venner glossy finish. Main table and side runner having a skirting @120mm thk with gives a

rich look. The office desk comes with the side runner having enough storage space.The side runner top with a

thickness of 80mm thk that gives the great look . Side table, side panel, shelves,drawers made up of 18mm thk

mdf with venner finish. Table having a provision of Pedestal of size: 400(L) X 500(D) X 660(H) having three drawers

to store essential & undestructure made out of 18mm thk mdf with veneer finish .Drawers have the stylish handle

which enhance the look. Material & Subtype:Engineered Wood - Medium Density Fibre Board, Colour & Colour

Family:Red - Cherry.side storage unit having a side panel, one drawer , one shutter & one shelf of 18mm thk mdf

with venner finish. The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN

PRO Certification/ AIOTA Certification.The product should be as per above given specification subject to

approval of EIC

14 Back Storage for Secretary Cabin

Supplying, and placing in position of back storage as perphotograph (only for reference)/drawing. A well-built

bookcase with the looks this is the complete package. A compartmentalized shelving system with adequate

space ensures any book will fit in the shelf. This Bookshelf are made out of 18mm thk HDHMR board with 2mm thk

pvc edge banding . The lower cabinets provisioned with openable shutters with shelf , D shape handles, locking

arrangements and also provisioned with open storage with shelf in it. The upper area to have open shelves for

display. The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot

melt glue at hot temperature.The product should be from manufacturer(OEM) which have BIFMA Certification

/GREEN PRO Certification/ AIOTA Certification.The product should be as per above given specification subject

to approval of EIC

15 Main Chair for Secretary Cabin 1.00 nos 47,622.50 47,622.50

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supply and placing Chair with Headrest as per image. Overall Dimensions, depth shall be 559mm D to 616mm D, width shall be

724mm W, Height shall be 947mm H to 1067mm H. Backrest height from seat shall be a minimum of 578mm. Backrest width shall

be a minimum of 485mm (at narrowest point). Chair shall be standard with an adjustable lumbar with a height adjustment range

of 108mm from 153mm to 261mm. Chair’s back tension and recline control knob are required. •Back support shall be provided

via a system of exposed integrated flexors vs. frame and suspension material. A pneumatic mechanism to accomplish a 127mm

seat height adjustment range between 407mm -547mm . Product shall have a five-star/five pronged base with a minimum

dimension of 661mm. Casters shall be at least 65mm diameter for ease of mobility. Seat foam shall be min. 64kg/cu m density of

polyurethane foam .

•Product shall be at least BIFMA Certified.

16 Visitor Chair for Secretary Cabin 4.00 nos 42,247.50 1,68,990.00

Supply and placing Chair as per image (for reference only). Overall Dimensions, depth shall be 559mm D to 616mm D, width

shall be 724mm W, Height shall be 947mm H to 1067mm H. Backrest height from seat shall be a minimum of 578mm. Backrest

width shall be a minimum of 485mm (at narrowest point). Chair shall be standard with an adjustable lumbar with a height

adjustment range of 108mm from 153mm to 261mm. Chair’s back tension and recline control for easy user adjustment•Back

support shall be provided via a system of exposed integrated flexors vs. frame and suspension material. Product shall have a five-

star base with a minimum dimension of 661mm. Casters shall be at least 65mm diameter for ease of mobility. Seat foam shall be

of min. 64kg/cu m density of polyurethane foam

•Product shall be at least BIFMA certified.

17 Sofa for Secretary Cabin

3 Seater Dimesnion:(L)1960mm X (D)880mm X (H)760mm) 1.00 nos 1,64,475.00 1,64,475.00

1 Seater Dimesnion:(L)840mm X (D)880mm X (H)760mm) 1.00 nos 90,945.00 90,945.00

Supplying and placing in position of sofa as per Image. Its stylish contemporary design boasts a kiln-dried solid

wood frame and rich leather. The magnificent frame slopes from the back to the seat giving a stately feeling to

your seat. High-density foam is upholstered in highly durable leather providing an exquisitely divine place to

unwind. Sleek stilt legs. Warp and scratch resistant solid wood frame with Easy to maintain leather upholstery.

Fade and stain resistant leather upholstery.Unique panel detail on the side with sleek stilt legs. Seating Height:

450mm, Legs Stainless Steel.The product should be from manufacturer(OEM) which have BIFMA Certification

/GREEN PRO Certification/ AIOTA Certification.The product should be as per above given specification subject

to approval of EIC

18 Center Table for Secretary Cabin

Dimension (W)1400mm X (D)700mm X (H)295mm 1.00 nos 70,950.00 70,950.00

Supplying and placing in position of center table as per image (only for reference). Crafted with luxurious

natural stone, the coffee table features geometric design elements for a stunning silhouette. First-tier tabletop

crafted of Nebula polished natural stone.

Second-tier tabletop and plinth base made of premium engineered wood wrapped in Wenge veneer.

36mm thick natural stone slab . Material & Subtype Natural Stone - Granite,Veneer - Wenge Veneer,Engineered

Table Top Material Natural Stone - Granite, Colour & Colour Family Black - Black Forest,Brown - Wenge. The

product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA

Certification.The product should be as per above given specification subject to approval of EIC

Dimension (W)600mm X (D)600mm X (H)475mm 1.00 nos 43,430.00 43,430.00

Supplying and placing in position of side table as per image (only for reference). Crafted with luxurious natural

stone, the side table features geometric design elements for a stunning silhouette. Dynamic veining and striking

Nebula polish . First-tier tabletop crafted of Nebula polished natural stone.

Second-tier tabletop and plinth base made of premium engineered wood wrapped in Wenge veneer.

36mm thick natural stone slab .

Material & Subtype Natural Stone - Granite,Veneer - Wenge Veneer,Engineered Wood - MDF

Table Top Material Natural Stone - Granite, Colour & Colour Family Black - Black Forest,Brown - Wenge. The

product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA

Certification.The product should be as per above given specification subject to approval of EIC

20 Coffee table set for Secretary Cabin

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Chair Dimension: 640mm(L) x 530mm(D) x 560mm(H) 1.00 set 53,535.00 53,535.00

Table Dimension (Dia) 600mm X (H) 610mm

Supplying & placing in position coffee table set comprising of a cafe style coffee table of size : - (Dia)600mm X

(H)610mm with two matching chairs. A warm walnut finish with solid wood construction. The table shall have

three legs with a central pillar base. The chairs come with the same finish and have soft fabric upholstered

cushions along with slender side bolsters and a curved back . Finish: Matte. The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

21 Recliner sofa for ante room of Secretary Cabin)

Dimension (W)870mm X (D)970mm X (H)1000mm 1.00 nos 89,440.00 89,440.00

Supplying, and placing in position of recliner sofa as perphotograph (only for reference) with manual recline

mechanism i.e. completely from a sitting position to a sleeping position. The single seater reclining sofa can be

added as a corner seat. Dimension (L)940mm X (D)940mm X (H)1020mm,Mechanism: Manual, Seating Capacity

1 Seater, Seating Height 480mm (18.89 inch),Finish: Matte. The seat cushion shall be made of multi layered foam

of density 40kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing.Backrest with foam of

28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free &

soft.The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/

AIOTA Certification.The product should be as per above given specification subject to approval of EIC

22 Wardrobe for Secretary ante room

Dimesnion: 900mm(L) x 600mm(D) x 1800mm(h) 1.00 nos 54,811.03 54,811.03

Supplying and placing in position of wardrobe as perphotograph (only for reference)/drawing. . The Top, side

panel, shutter, bottom , drawer facia & shelves made out of 18mm thk Laminated HDHMR board with pvc

edge banding . All the exposed edges are edge banded with 2mm thk pvc edging. Wardrobe back & drawer

bottom are made of 8mm thk prelam mdf board with 2mm thk pvc edge banding. Having openable shutters

with D shape handles and locking arrangement . Also having a drawer, shelves & hanging rod . The product

should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA

Certification.The product should be as per above given specification subject to approval of EIC

23 Coat Stand for Secretary ante room 1.00 nos 20,640.00 20,640.00

Supplying and placing in position Of coat stand of size: 500mm(L) x 500mm(D) x 1650mm(H) as per image or as

approved by EIC. The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN

PRO Certification/ AIOTA Certification.The product should be as per above given specification subject to

approval of EIC

24 Main Table for PA TO Secetary / PA to Addl. Secretary Cabin

Main Table Dimesnion: 1500mm(L) x 600mm(D) x 750mm(H) 4.00 nos 81,055.00 3,24,220.00

Overall Side runner Dimension: 1200mm(L) x 450mm(D) x 706mm(h) 0.00 0.00

Supplying & placing in position l-shape desk as per image. Primary work surface overall size is 1500mm (l)x

1200mm(d)x 750mm(h) 45mm thick table top made of laminated HDHMR board work surface with classic walnut

finish 2mm thick pvc edge banding made of same matte finish. side panel made of 45mm thick HDHMR board .

Side unit of size 1200mm(l)x 400mm(d)x 706mm(h) ,(combination construction- table top made 45mm thick

table top based on ss stud grade 304 right side below from table top ss stud 1 fixed pedestal top 25mm thick size

is 400mm(l)x 500mm(d)x 646mm(h),3 drawers. Fixed pedestal of size 500mm(l)x 464mm(d)x 740mm(h) , having 2

drawers + 1 filling drawer with castors provided with central lock for security and handles for easy opening.The

product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA

Certification.The product should be as per above given specification subject to approval of EIC

25 Back storage for PA TO Secetary / PA to Addl. Secretary Cabin

Dimesnion: 1500mm(L) x 450mm(D) x 750mm(H) 3.00 nos 29,562.50 88,687.50

Dimesnion: 1200mm(L) x 450mm(D) x 750mm(H) 1.00 nos 23,650.00 23,650.00

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying, and placing in position of medium height storage @ 750mm height as perphotograph (only for

reference)/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top

shall be made from 18 mm thick Laminated HDHMR board with laminate of approved shade and rest of the

sides as well as shelves and shutter to be made up of 18 mm thick Laminated HDHMR board with laminate of

approved shade while back to be made of 8 mm thick Laminated HDHMR board with laminate of approved

shade. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD

shape handles & locking arrangement.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

26 Main Chair for PA TO Secetary / PA to Addl. Secretary Cabin 4.00 nos 19,457.50 77,830.00

Supplying and placing chair with headrest as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep your weight off the

chair. Standard range of adjustability 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by

pulling handle up. Slide seat forward or back to accommodate various leg lengths. Lumbar height adjustable 60mm

Should have dual wheels that roll smoothly on carpets with 65mm for increased mobility.

. SCSIAQ Gold Certified. BIFMA certified

27 Visitor Chair for PA TO Secetary /PA to Addl. Secretary Cabin 8.00 nos 17,630.00 1,41,040.00

Supplying and placing Medium Back chair as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up . Standard range of

adjustability 120mm, from 420mm H – 540mm H. Seat depth adjustable by 55mm (429mm to 487mm) . Lumbar height

adjustable 60mm Should have dual wheels that roll smoothly on carpets with 65mm for increased mobility. SCSIAQ Gold

Certified. BIFMA certified

28 Sofa for PA TO Secetary Cabin

2 seater Dimension (L)1390mm X (D) 750mm X (H) 710mm 1.00 nos 54,180.00 54,180.00

Supplying, and placing in position of sofa as per Image (for reference only) or as approved by EIC. Premium

Leatherette upholstry, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern,

Texture:Two Tone. Steam beech Wood/ solid wood for framing construction of sofa .The seat cushion is made

of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing.

The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with

polyster polyfill outer layer of 200 gsm.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

29 Workstation for PA TO Secetary

Dimesnion: 1500mm(L) x 600mm(D) x 1200mm(H) 1.00 nos 89,761.43 89,761.43

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying and placing in position of sliding tile base modular Linear Workstation as perphotograph (only for reference)/drawing.

Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild

steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with

50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick

laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of

approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2

levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the

approved drawing. Tabletop for workstation made up of 25mm thick Laminated HDHMR board of approved shade. The worktop

shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from

18mm thick Laminated HDHMR board of approved shade. All working or non working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue . Provision of one PVC keyboard tray and Metal CPU trolley with

lockable castors for each seating. Also a provision of Mobile Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a

combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick laminated HDHMR board

with handles & central Locking arrangement. Provision of 8mm thk Toughened Glass between two seating .The product should

be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product should

be as per above given specification subject to approval of EIC

30 Chair for PA TO Secetary 1.00 nos 17,630.00 17,630.00

Supplying and placing Medium Back chair as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

. Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep your weight off

the chair. Standard range of adjustability is 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by

pulling handle up. Slide seat forward or back to accommodate various leg lengths. Release handle to jock, to release. Lumbar

height adjusts 60mm by grabbing exposed tabs and sliding the lumbar support up or down.

Comfort dial has three settings: (1) full-recline; (2) boosted setting that has more resistance than your body is providing; (3) an

upright back lock setting Rectilinear height,

width, pivot and depthadjustable arms.Should have hard, dual wheels that roll smoothly on carpets with 65mm for increased

mobility. Soft, dual-wheel casters as an option for use on hard floors or chair mats.

. SCSIAQ Gold Certified. BIFMA certified

31 Cantilever chair for PA to Addl. Secretary Cabin 4.00 nos 14,727.50 58,910.00

Supplying and placing Medium Back chair as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

. Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep

your weight off the chair. Standard range of adjustability is 120mm, from 420mm H – 540mm H. Seat depth

adjusts 55mm (429mm to 487mm) by pulling handle up. Slide seat forward or back to accommodate various leg

lengths. Release handle to jock, to release. Lumbar height adjusts 60mm by grabbing exposed tabs and sliding

the lumbar support up or down.

Comfort dial has three settings: (1) full-recline; (2) boosted setting that has more resistance than your body is

providing; (3) an upright back lock setting Rectilinear height,

width, pivot and depthadjustable arms.Should have hard, dual wheels that roll smoothly on carpets with 65mm

for increased mobility. Soft, dual-wheel casters as an option for use on hard floors or chair mats.

. SCSIAQ Gold Certified. BIFMA certified

32 Main Table for Addl. Seceretary Cabin/Type-5

Main Table Dimension (L)2200mm X (D)1000mm X (H) 750mm 5.00 nos 2,07,690.00 10,38,450.00

Overall Side Runer Dimension (L)1800mm X (D) 500mm X (H) 705mm

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying and placing in position of primary work surface overall size is 2200mm(l)x 900mm(d)x 750mm(h) 45mm

thick table top made of laminated HDHMR board with warm finish in black oak . Side panel made of 45mm thick

MDF. Side unit of overall size 1800mm(l)x 500mm(d)x 705mm(h) ,(combination construction below table top side

unit have 1 open fixed shelve with 3 drawers + 2 openable doors .mobile pedestal of size 450mm(l)x 400mm(d)x

630mm(h) , having 2 drawers + 1 filling drawer with castors provided with central lock for security and handles

provided for easy opening. The product should be from manufacturer(OEM) which have BIFMA Certification

/GREEN PRO Certification/ AIOTA Certification.The product should be as per above given specification subject

to approval of EIC

33 Back Storage for Addl. Seceretary Cabin/Type-5

Supplying, and placing in position of back storage as perphotograph (only for reference)/drawing. A

Compartmentalized shelving system with adequate space made out of 18mm thk Laminated HDHMR board

with 2mm thk pvc edge banding . The lower cabinets provided with openable shutters with shelf , D shape

handles, locking arrangements and also provided with open storage with shelf in it. The upper area to have

open shelves for display. The working edges shall be provided with machine pressed 2mm thick PVC edging

using special hot melt glue. The product should be from manufacturer(OEM) which have BIFMA Certification

/GREEN PRO Certification/ AIOTA Certification.The product should be as per above given specification subject

to approval of EIC

34 Main Chair for Addl. Seceretary Cabin/Type-5 5.00 nos 39,775.00 1,98,875.00

Supplying and placing chair with headrest as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up . Standard range of

adjustability is 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by pulling handle up. Lumbar

height adjusts 60mm by grabbing exposed tabs and sliding the lumbar support up or down.

Comfort dial has three settings: (1) full-recline; (2) boosted setting that has more resistance than your body is providing; (3) an

upright back lock setting Rectilinear height,

width, pivot and depthadjustable arms.Should have hard, dual wheels that roll smoothly on carpets with 65mm for increased

mobility. SCSIAQ Gold Certified. BIFMA certified

35 Visitor Chair for Addl. Seceretary Cabin/Type-5 20.00 nos 38,915.00 7,78,300.00

Supplying and placing chair with headrest as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

k. Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep your weight off

the chair. Standard range of adjustability is 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by

pulling handle up. Lumbar height adjusts 60mm

Comfort dial has three settings: (1) full-recline; (2) boosted setting that has more resistance than your body is providing; (3) an

upright back lock setting Rectilinear height,

width, pivot and depthadjustable arms.Should have hard, dual wheels that roll smoothly on carpets with 65mm for increased

. SCSIAQ Gold Certified. BIFMA certified

36 Sofa for Addl. Seceretary Cabin/Type-5

3 seater Dimension: 1800mm(l) x710mm(d)x 770mm(h) 5.00 nos 92,665.00 4,63,325.00

1 seater Dimension: 800mm(l) x710mm(d)x 770mm(h) 10.00 nos 49,020.00 4,90,200.00

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying and placing in position of exclusive premium leatherette modernist classic design lounge seating sofa

with kiln-dried wood framing , with comfortable seat depth & height . Thickness of plywood used (mm) shall be

12 mm grade IS- 303 Indian standard for commercial (common) and moisture proof plywood. under structure

frame shall be constructed from 18 mm thick kiln-dried beech wood framing. The complete structure shall be

covered by p.u. foam fixed with adhesive glue, the frame shall be padded with high resilience polyurethane

foam having 28 +/- 5 density in seat it shall be stack foam of 50mm thik,40mm thick back foam having 20 +/- 5

density foam used, there shall be cushion arm 10mm thick provided padded with high resilience polyurethane

foam having density 32 +/- 5. the complete stack foam structure shall be covered with premium leatherette in

premium leatherette with solid wood colour, (seat height @ 525mm, back height @ 400mm).The product should

be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The

product should be as per above given specification subject to approval of EIC

37 Center Table for Addl. Seceretary Cabin/Type-5

Dimension (W)1080mm X (D)550mm X (H)450mm 5.00 nos 41,280.00 2,06,400.00

Supplying and placing in position of centre table as perphotograph (only for reference). The centre table shall

be made from 10mm thick tempered Toughened Glass with Beech wood legs. The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

38 Side Table for Addl. Seceretary Cabin/Type-5

Supplying & placing in position of side table as per image.Made from 10mm thick tempered Toughened Glass,

with Beech wood legs. The product should be from manufacturer(OEM) which have BIFMA Certification

/GREEN PRO Certification/ AIOTA Certification.The product should be as per above given specification subject

to approval of EIC

39 Coat Stand for Addl. Seceretary Cabin/Type-5 5.00 nos 20,640.00 1,03,200.00

Supplying and placing in position Of coat stand of size: 500mm(L) x 500mm(D) x 1650mm(H) as per image or as

approved by EIC. The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO

Certification/ AIOTA Certification.The product should be as per above given specification subject to approval

40 Main Table for Type-2,3 Cabin

Main Table Dimension : 1500mm(L) X 750mm(D) X 750mm(H) 10.00 nos 78,475.00 7,84,750.00

Overall Side Unit Dimension : 1500mm(L) X 450mm(D) x 750mm(H)

Supplying, and placing in position of main Table as per drawing/image. Tables of size 1500mm(L) x 750mm(D) x

750mm(H). Table top made out of 25mm thk laminated HDHMR board with 2mm thk pvc edge banding & side

panel & modesty panel made up of 18mm thick Laminated HDHMR board with laminate of approved shade

.The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue .

The table shall have a Side Storage of size 900mm L x 450mm D x 750mm Ht., Storage Top made out of 25mm

thick Laminated HDHMR board and rest all storage to be made out of 18 mm thick laminated HDHMR board.

All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA

glue. Side Storage having a provision of 3 drawer unit of size: 400mm(L) x 450mm(D) x 675mm(H) attached to

the side storage top with the help of shiny metal rods. Pedestal Unit have a combination of 2 drawer & one

filing drawer. The pedestal storage unit shall be made of 18 mm thick laminated HDHMR board with provision of

central Locking arrangement.The product should be from manufacturer(OEM) which have BIFMA Certification

/GREEN PRO Certification/ AIOTA Certification.The product should be as per above given specification subject

to approval of EIC

41 Back Storage for Type-2 Cabin

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying, and placing in position of medium height storage @ 750mm height as perphotograph (only for

reference)/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top

shall be made from 18 mm thick Laminated HDHMR board with laminate of approved shade and rest of the

sides as well as shelves and shutter to be made up of 18 mm thick Laminated HDHMR board with laminate of

approved shade while back to be made of 8 mm thick Laminated HDHMR board with laminate of approved

shade. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD

shape handles & locking arrangement.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

42 Main chair for Type-2 Cabin 10.00 nos 19,457.50 1,94,575.00

Supplying and placing chair with headrest as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up . Standard range of

adjustability is 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by pulling handle up. Slide seat

forward or back to accommodate various leg lengths. Lumbar height adjusts 60mm by grabbing exposed tabs and sliding the

lumbar support up or down.

Should have hard, dual wheels that roll smoothly on carpets with 65mm for increased mobility.

. SCSIAQ Gold Certified. BIFMA certified

43 Visitor chair for Type-2 Cabin 40.00 nos 17,630.00 7,05,200.00

Supplying and placing chair with headrest as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep your weight off the

chair. Standard range of adjustability is 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by

pulling handle up. Slide seat forward or back to accommodate various leg lengths. Should have hard, dual wheels that roll

smoothly on carpets with 65mm for increased mobility.

SCSIAQ Gold Certified. BIFMA certified

44 Sofa for Type-3 Cabin

2 seater Dimension (L)1390mm X (D) 750mm X (H) 710mm 6.00 nos 54,180.00 3,25,080.00

Supplying, and placing in position of sofa as per Image or as approved by EIC.:Premium Leatherette, Seating

Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. Solid wood for

framing construction of sofa .The seat cushion made of multi layered foam of density 32-35 kg/m3. The seating

cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch

strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The product should be

from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The

product should be as per above given specification subject to approval of EIC

45 Linear Workstation for Type-1/ MTS Area/ Dispatch room

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying and placing in position of sliding tile base modular Linear Workstation as perphotograph (only for reference)/drawing.

Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild

steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with

50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick

laminated MDF tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of

approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2

levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the

approved drawing. Tabletop for workstation made up of 25mm thick Laminated HDHMR board of approved shade. The worktop

shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from

18mm thick Laminated HDHMR board of approved shade. All working or non working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue at hot temperature. . Provision of one PVC keyboard tray and Metal

CPU trolley with lockable castors for each seating. Also a provision of Mobile Pedestal Unit (size:- L-400mm x D-450mm x H-600mm)

with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick laminated HDHMR

board with provision of handles & central Locking arrangement.Provision of 8mm thk Toughened Glass between two seating . The

product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The

product should be as per above given specification subject to approval of EIC

46 L-shape Workstation for Type-1/ PA & DEO area

Supplying and placing in position of sliding tile base modular L-shape Workstation as perphotograph (only for

reference)/drawing. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-

1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be

powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be

fitted with 9mm thick laminated MDF tiles of approved shade. Partition shall have provision for pin up board with fabric/ white

marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data

cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be

carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick Laminated HDHMR board of

approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s

panels should be made from 18mm thick Laminated HDHMR board of approved shade. All working or non working edges shall

be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature Provision of one PVC

keyboard tray and Metal CPU trolley with lockable castors for each seating. Also a provision of Mobile Pedestal Unit (size:- L-

400mm x D-450mm x H-600mm) with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of

18 mm thick laminated HDHMR board with provision of handles & central Locking arrangement. Provision of 8mm thk toughted

Toughened Glass between two seating . The product should be from manufacturer(OEM) which have BIFMA Certification

/GREEN PRO Certification/ AIOTA Certification.The product should be as per above given specification subject to approval of EIC

47 Workstation Chair Type-1/ PA & DEO area/ MTS Area/ Dispatch room 52.00 nos 17,630.00 9,16,760.00

Supplying and placing chair with headrest as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep your weight off the

chair. Standard range of adjustability is 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by

pulling handle up. Slide seat forward or back to accommodate various leg lengths. Release handle to jock, to release. Lumbar

height adjusts 60mm by grabbing exposed tabs and sliding the lumbar support up or down.

Comfort dial has three settings: (1) full-recline; (2) boosted setting that has more resistance than your body is providing; (3) an

upright back lock setting Rectilinear height,

width, pivot and depthadjustable arms.Should have hard, dual wheels that roll smoothly on carpets with 65mm for increased

. SCSIAQ Gold Certified. BIFMA certified

48 Medium Height Storage

Dimesnion: 3000mm(L) x 450mm(D) x 1200mm 1.00 nos 94,600.00 94,600.00

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying, and placing in position of medium height storage @ 1200mm height as perphotograph (only for

reference)/drawing . The storage unit having Openable shutters with shelf in it. The storage unit top shall be

made from 18 mm thick Laminated HDHMR board with laminate of approved shade and rest of the sides as well

as shelves and shutter to be made up of 18 mm thick Laminated HDHMR board with laminate of approved

shade while back to be made of 8 mm thick Laminated HDHMR board with laminate of approved shade. All

edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape

handles & locking arrangement.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

49 Full Height Storage

Supplying, and placing in position of full height storage @ 1800mm height as perphotograph (only for

reference)/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top

shall be made from 18 mm thick Laminated HDHMR board with laminate of approved shade and rest of the

sides as well as shelves and shutter to be made up of 18 mm thick Laminated HDHMR board with laminate of

approved shade while back to be made of 8 mm thick Laminated HDHMR board with laminate of approved

shade. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters with D

shape handles & locking arrangement..The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

50 Table for court room for Judge

Supplying, and placing in position of Table as per Image/drawing . The table top made up of 36mm thick

Laminated HDHMR board with laminate of approved shade and understructure shall be made of 25mm thick

aminated HDHMR board with 2mm thk pvc edge banding . Modesty & side panel shall be 25mm thk laminated

HDHMR board with 2mm thk pvc edge banding . Table top height will be 750mm from the floor level & one

additional top at the height of 300 mm above the table top. The working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue. Provision of 18mm thk Laminated HDHMR board

shelf below the table top . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping

glued with hot melt glue. The product should be from manufacturer(OEM) which have BIFMA Certification

/GREEN PRO Certification/ AIOTA Certification.The product should be as per above given specification subject

to approval of EIC

51 Chair for court room table for judge 6.00 nos 23,005.00 1,38,030.00

Supplying and placing in position fix leatherette chair in brown colour with matte finish. Fixed multi purpose

chair, with an all over size is : 610mm(l)x 490mm(d)x 990mm(h) as per image. The chair is made of full

leatherette in brown colour . Details :- arms : ms covered with pu top, Use of ply: 12 mm thick hot pressed bwr

plywood (is grade - 303 for seat and back) . Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per

cu meter for best quality cushioning in seat , Back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg

per cu meter for best quality cushioning in back , Backrest support foam design based on symmetrical lumbar

support , Base : four wooden legs.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

52 Steno Table for Court room

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying, and placing in position of table as per image/drawing. Table top made out of 25mm thk laminated

HDHMR board with 2mm thk pvc edge banding with ms powder coated "C" shape legs of size 50 x 50mm.

Comprising of metal powder coated cross connectors of size 40mm X 40mm. . The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt glue . The product should be

from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The

product should be as per above given specification subject to approval of EIC

53 Steno Chair for Court room 4.00 nos 22,037.50 88,150.00

Supplying, and placing in position of chair as per Image.Simple elegant construction with a separate backrest

and seat cushion, Deep Black premium leatherette upholstery Dimension:(W)570mm X (D)500mm X (H)940mm,

Back Type:Medium Back, Base:Cantilever Frame,Base Type:Cantilever, Maximum Seating Height:18.70". The Seat

& back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair

seat has foam of density 30-32 kg/m3 The backrest has a foam of 28kg/m3. The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

54 Table for Court room

Table Dimension: 3300mm(L) x 600mm(D) x 750mm(H) 2.00 nos 1,29,927.73 2,59,855.45

Supplying and placing in position of table as per image/drawing. Modular Table top are made up of 25mm

thick Laminated HDHMR board with laminate of approved shade and understructure shall be made of 18mm

thick laminated HDHMR board gable ends and modesty panels. The working edges shall be provided with

machine pressed 2mm thick PVC edging using special hot melt glue .The table shall be provisioned with one

shelf below the top are made of 18mm thick laminated HDHMR board with PVC edges.The product should be

from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The

product should be as per above given specification subject to approval of EIC

55 Chair along with table for Court room 6.00 nos 17,415.00 1,04,490.00

Supplying and placing Medium Back chair as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

. Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep

your weight off the chair. Standard range of adjustability is 120mm, from 420mm H – 540mm H. Seat depth

adjusts 55mm (429mm to 487mm) by pulling handle up. Slide seat forward or back to accommodate various leg

lengths. Release handle to jock, to release. Lumbar height adjusts 60mm by grabbing exposed tabs and sliding

the lumbar support up or down.

Comfort dial has three settings: (1) full-recline; (2) boosted setting that has more resistance than your body is

providing; (3) an upright back lock setting Rectilinear height,

width, pivot and depthadjustable arms.Should have hard, dual wheels that roll smoothly on carpets with 65mm

for increased mobility. Soft, dual-wheel casters as an option for use on hard floors or chair mats.

. SCSIAQ Gold Certified. BIFMA certified

56 Visitor Chair for Court room 25.00 nos 11,395.00 2,84,875.00

Supplying, and placing in position of visitor chair as per Image . Fixed and padded Armrests .Deep cushioned

back and seat conform to body contours for proper alignment. Material: Fabric, Dimension (W)520mm X

(D)470mm X (H)930mm, Maximum Seating Height: 475mm,Base: Cantilever Frame.The Seat & back are made

up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of

density 30-35 kg/m2 foam. The backrest has a foam of 28kg/m3. The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

57 Sofa for Judge Waiting lounge area

3 seater : Dimension (L)2010mm X (D)850mm X (H)725mm 3.00 nos 1,05,780.00 3,17,340.00

2 seater Dimension(L)1490mm X (D)800mm X (H)725mm 3.00 nos 81,270.00 2,43,810.00

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying, and placing in position of sofa as perphotograph (only for reference). Plush premium leatherette

upholstery with a tufted back and armrest.Seating Height:18.50", Legs:Wooden, Finish:Glossy, The seat cushion is

made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic

webbing. The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The product should

be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The

product should be as per above given specification subject to approval of EIC

58 Center Table for Judge Waiting lounge area

Dimension (L)1130mm X (W)630mm X (H)410mm 3.00 nos 33,110.00 99,330.00

Supplying and placing in position of centre table as perphotograph (only for reference). The centre table made

of solid wood (First Grade Teak Wood) in PU matte polish with 8mm thk Toughened Glass placed on top with

turned wooden legs . The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN

PRO Certification/ AIOTA Certification.The product should be as per above given specification subject to

approval of EIC

59 Side table for Judge Waiting lounge area

Dimension(L)680mm X (W)530mm X (H)450mm 5.00 nos 25,800.00 1,29,000.00

Supplying, and placing in position of side table as per Image.The side table made of solid wood (First Grade

Teak Wood) in PU matte polish.The Toughened Toughened Glass placed the top of the table in 8mm thk. The

product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA

Certification.The product should be as per above given specification subject to approval of EIC

60 Conference Table

Supplying, and placing in position of conferrence table as perphotograph (only for reference)/drawing . The

worksurface top should be of thickness 42mm top laminated HDHMR board . The side panel made up of 36mm

thk laminated HDHMR board with 2mm thk pvc edge banding & modesty panel made out of 25mm thk

laminated HDHMR board with 2mm thk pvc edge banding. The legs of the table should be Made from 36mm

laminated HDHMR board with edge banding . The wire carrier should Made from 0.6mm thick CRCA & powder

coated 40-50 microns . Also provision of flip top box & metal raceway for wire flow.The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

61 Main Chair for Conference room 1.00 nos 33,325.00 33,325.00

Supply and Place chair with headrest as per image.

•Chairs shall meet or exceed all ANSI/BIFMA Certification

•Overall width shall be 597mm (23-1/2”) to 685.8mm ( 27“). Height Chairs: 927mm (36-1/2”) to 1047.8mm (41-1/4”). •Backrest height from seat

shall be a minimum of 546mm (21-1/2”).

•Backrest width shall be a minimum of 438mm (17-1/4”) at narrowest point. • Back tension and recline control knob required. Three positions

shall be engaged at each audible click when the knob is turned. Adjustable lumbar shall offer a height adjustment range of 57mm (2-1/4”)

•A pneumatic cylinder shall be used to accomplish a 127mm (5”) seat height adjustment range between 16-1/2”-21-1/2” •Seat shall include

a 57mm (2-1/4”) seat depth adjustment within a range of 15-1/2” to 17-3/4” •Seat pan angle shall be 2º to keep the user's torso-thigh angle

greater than 90ºBase shall be a five-star base with a minimum dimension of 667mm (26-1/4”).

62 Visitor Chair for Conference room 24.00 nos 31,175.00 7,48,200.00

Supply and Place chair as per image.

•Chairs shall meet or exceed all ANSI/BIFMA Certification.•Overall depth shall be 533mm (21”) to 603mm (23-3/4”)

•Overall width shall be 597mm (23-1/2”) to 685.8mm ( 27“). Height Chairs: 927mm (36-1/2”) to 1047.8mm (41-1/4”). •Backrest

height from seat shall be a minimum of 546mm (21-1/2”).

•Backrest width shall be a minimum of 438mm (17-1/4”) at narrowest point. • Back tension and recline control knob required.

Adjustable lumbar shall offer a height adjustment range of 57mm (2-1/4”) from 165mm (6-1/2”) to 222.3mm (8-3/4”).

•A pneumatic cylinder shall be used to accomplish a 127mm (5”) seat height adjustment range between 16-1/2”-21-1/2” •Seat

shall include a 57mm (2-1/4”) seat depth adjustment within a range of 15-1/2” to 17-3/4”

•Base shall be a five-star base with a minimum dimension of 667mm (26-1/4”).

63 Visitor Chair for Conference room (along the wall) 24.00 nos 26,337.50 6,32,100.00

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X

(H)990mmas per Image. Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever, Base:Cantilever

Frame, Base Type:Cantilever, Maximum Seating Height:485mm.The Seat & back are made up of 12mm thk hot

pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3.

The backrest has a foam of 28kg/m3.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

64 Main table for Chairpersons Cabin

Main Table Dimension:(L)2800mm X (D)1130mm X (H)770mm 1.00 nos 3,51,525.00 3,51,525.00

Side Runner Dimension: :(L)1200mm X (D)600mm X (H)770mm 0.00 0.00

Supplying, and placing in position of table as perphotograph (only for reference). Made of engineered wood-

HDHMR board & veneer glossy finish on the same. Main Table top thkness 80mm , side panel/gable end in

70mm thk HDHMR with veneer glossy finish. Main table and side runner having a skirting @120mm thk with gives

a rich look. The office desk comes with the side runner having enough storage space.The side runner top with a

thickness of 80mm thk that gives the great look . Side table, side panel, shelves,drawers made up of 18mm thk

HDHMR with veneer finish. Table having a provision of Pedestal of size: 400(L) X 500(D) X 660(H) having three

drawers to store essential & undestructure made out of 18mm thk HDHMR with veneer finish .Drawers have the

stylish handle which enhance the look. Side storage unit having a side panel, one drawer , one shutter & one

shelf of 18mm thk HDHMR with veneer finish. The product should be from manufacturer(OEM) which have

BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

65 Storage for Chairpersons Cabin

Supplying, and placing in position of back storage as perphotograph (only for reference)/drawing. A

compartmentalized shelving system with adequate space ensures any book will fit in the shelf. This Bookshelf are

made out of 18mm thk laminated HDHMR board with 2mm thk pvc edge banding . The lower cabinets

provisioned with openable shutters with shelf , D shape handles, locking arrangements and also provisioned with

open storage with shelf in it. The upper area to have open shelves for display. The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt glue .The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

66 Main/Dicussion High back Chair for Chairpersons Cabin 2.00 nos 47,622.50 95,245.00

Supply and placeing Chair with Headrest as per image. Overall Dimensions, depth shall be 559mm D to 616mm D, width shall be

724mm W, Height shall be 947mm H to 1067mm H. Backrest height from seat shall be a minimum of 578mm. Backrest width shall

be a minimum of 485mm (at narrowest point). Chair shall be standard with an adjustable lumbar with a height adjustment range

of 108mm from 153mm to 261mm. Chair’s back tension and recline control knob shall be located on the right side of the chair for

easy user. adjustment. Four positions shall be engaged at each audible click when the knob is turned: Mesh Back and Fabric

Upholstery on seat. •Back support shall be provided via a system of exposed integrated flexors vs. frame and suspension

material. A pneumatic cylinder shall be used to accomplish a 127mm seat height adjustment range between 407mm -547mm

(per HFES 100). Passive seat edge angle shall allow the front edge of the seat to flex 39mm relieving pressure behind the thighs,

allowing proper blood circulation to the user’s legs and feet. The angle between the seat and backrest shall fall between 98° and

116°. Chair shall have a weight activated mechanism with an intuitive boost option to accommodate the 5th to 95th percentile

population. Arms should be Height-, Width-, Pivot-, Depth-Adjustable (HWPD). Product shall have a five-star base with a minimum

dimension of 661mm. Casters shall be at least 65mm diameter for ease of mobility. Seat foam shall be constructed of 64kg/cu m

density of polyurethane foam which provides the proper amount of support and prevents the user from bottoming out on the

•BIFMA Certified

67 Visitor / Dicussion medium back Chair for Chairpersons Cabin 10.00 nos 42,247.50 4,22,475.00

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supply and Place chair as oer image (for reference only).•Overall work chair height shall be 38-1/2” to 43-1/2”.

Backrest width shall be at least 18”W (within ANSI/HFES 100-2007 recommendations)

Shall meet or exceed ANSI/BIFMA requirements.•Backrest cushion shall be a composite of different density polyurethane foam sheets to

provide optimal comfort. Total cushion thickness shall be at least 11/16". Densities shall range between 1.65 and 2.8 lb/cu ft. •Adjustable

lumbar shall have a height range of 5” between 5-1/4” and 10-1/4” . Shall have separate adjustments for upper back force and lower back

firmness to ensure proper spinal support and to meet user preference. •Variable back stop must allow user to set the backrest at five positions

within the reclining range; including an upright lock. •A pneumatic cylinder shall be used to accomplish seat height adjustment range

between 15-1/2”H and 20-1/2”H (per HFES 100) accomplished with an optional 17”H to 24”H” range for taller users. Stool seat must have

adjustments in an 8” range between 22”H and 30”H. •Seat cushion shall be molded polyurethane foam at least 2” thick in the center for

optimal comfort. Foam density shall be 3.8 lb/cu ft. •Seat depth shall be 19”. Seat depth adjustment shall be in a 3” range between 15-3/4”D

to 18-3/4”D . •Passive seat edge angle must allow the front edge of the seat to flex 1-1/2” relieving pressure behind the thighs, allowing proper

blood circulation to the user’s legs and feet. •Backrest shall have recline range of 20 degrees with five back stop locking positions. •Chairs shall

feature hard 65mm (2-1/2”) diameter dual-wheel casters with a soft wheels option for hard floors.

68 Dicussion table for Chairpersons Cabin

Supplying and placing in position of modern design 8 seater conference table as perphotograph (only for

reference). the main desk overall size is 2400mm(l)x 1200mm(d)x 760mm(h), the table top and legs shall be

made out of 70- 80mm thick mdf board including with 0.5mm laminate with glossy finish and, leatherette

attached on table top for extra comfort or looks, laminate mdf with glossy finish. The desk table top carries a

leatherette folio with an inbuilt wire management system for easy access. the under structure shall be made out

of 9-18mm thick 0.5mm laminate with glossy finish mdf board. Table top made 50 mm thick, table top offers you

a generous workspace, desk primary work surface use premium quality materials. The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

69 Sofa for Chairpersons Cabin

3 seater Dimension(W) 2240mm X (D) 970mm X (H) 940mm 1.00 nos 1,65,765.00 1,65,765.00

2 seater Dimension(W) 1620mm X (D) 970mm X (H) 940mm 1.00 nos 1,31,365.00 1,31,365.00

1 seater Dimension(W) 945mm X (D) 970mm X (H) 940mm 1.00 nos 91,375.00 91,375.00

Supplying & placing in position of sofa as per image. The seat cushion shall be multi layered foam of density 32-

35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The backrest has a foam of 28kg/m3

with polyster polyfill outer layer of 200 gsm. The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

70 Center Table for Chairpersons Cabin

Dimension (W)1400mm X (D)700mm X (H)340mm 1.00 nos 82,560.00 82,560.00

Supplying & placing in position of center table as per image.. A wooden base with 36mm Bianco polished

natural stone top with bevelled edges The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

71 SideTable for Chairpersons Cabin

Dimension (W)600mm X (D)600mm X (H)460mm 1.00 nos 32,895.00 32,895.00

Supplying & placing in position of side table as per image.. A wooden plinth base with 36mm thk Bianco

polished natural stone top with bevelled edges .The product should be from manufacturer(OEM) which have

BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

72 Recliner sofa for ante room ( Chairpersons)

Dimension (W)870mm X (D)970mm X (H)1000mm 1.00 nos 89,440.00 89,440.00

Supplying, and placing in position of recliner sofa as perphotograph (only for reference). with manual recline

mechanism, completely from a sitting position to a sleeping position. The seat cushion to be made of multi

layered foam of density 40kg/m3. The seating cushion to have 2.75 & 1.75 inches of elastic webbing. The

backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

73 Side Table for ante room ( Chairpersons)

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Dimension (W)485mm X (D)485mm X (H)490mm 1.00 nos 28,810.00 28,810.00

Supplying, and placing in position of side table as perphotograph (only for reference).With a solid wood tray top

perching on a Brushed Brass finished base. Tabletop made of kiln-dried solid wood with Base made of high-

quality metal.38mm thick, tray-like tabletop .The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

74 Wardrobe for ante room( Chairpersons)

Dimesnion: 900mm(L) x 600mm(D) x 1800mm(h) 1.00 nos 54,811.03 54,811.03

Supplying and placing in position of wardrobe as perphotograph (only for reference)/drawing. . The Top, side

panel, shutter, bottom , drawer facia & shelves made out of 18mm thk laminated mdf board with pvc edge

banding . All the exposed edges are edge banded with 2mm thk pvc edging. Wardrobe back & drawer bottom

are made of 8mm thk laminated mdf board with 2mm thk pvc edge banding. Having a Provision of openable

shutter with D shape handles and locking arrangement . Also having a provision of drawer, shelves & hanging

rod . The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO

Certification/ AIOTA Certification.The product should be as per above given specification subject to approval

75 Coat Stand for ante room( Chairpersons) 1.00 nos 20,640.00 20,640.00

Supplying and placing in position Of coat stand of size: 500mm(L) x 500mm(D) x 1650mm(H) as per image or as

approved by EIC. The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO

Certification/ AIOTA Certification.The product should be as per above given specification subject to approval

76 Main Table for P.S to Chairmanperson Chamber

Main Table Dimension : 1500mm(L) X 750mm(D) X 750mm(H) 1.00 nos 78,475.00 78,475.00

Overall Side Unit Dimension : 1500mm(L) X 450mm(D) x 750mm(H)

Supplying, and placing in position of main Table as per drawing/image. Table of size 1500mm(L) x 750mm(D) x

750mm(H). The Table top made out of 25mm thk laminated HDHMR board with 2mm thk pvc edge banding &

side panel & modesty panel made up of 18mm thick Laminated HDHMR board with laminate of approved

shade .The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot

melt glue . The table have a provision of Side Storage of size 900mm L x 450mm D x 750mm Ht., Storage Top are

made out of 25mm thick Laminated HDHMR board and rest all storage to be made out of 18 mm thick

laminated HDHMR board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping

glued with hot melt glue. Side Storage having a provision of 3 drawer unit of size: 400mm(L) x 450mm(D) x

675mm(H) attached to the side storage top with the help of shiny metal rods. Pedestal Unit have a combination

of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick laminated HDHMR

board with provision of central Locking arrangement.The product should be from manufacturer(OEM) which

have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above

given specification subject to approval of EIC

77 Back Storage for P.S to Chairmanperson Chamber

Dimension: 1500mm(L) X 450mm(D) x 750mm(H) 1.00 nos 29,562.50 29,562.50

Supplying, and placing in position of medium height storage @ 750mm height as perphotograph (only for

reference)/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top

shall be made from 18 mm thick Laminated HDHMR board with laminate of approved shade and rest of the

sides as well as shelves and shutter to be made up of 18 mm thick Laminated HDHMR board with laminate of

approved shade while back to be made of 8 mm thick Laminated HDHMR board with laminate of approved

shade. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD

shape handles & locking arrangement.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

78 Main Chair for P.S to Chairmanperson Chamber 1.00 nos 19,457.50 19,457.50

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying and placing chair with headrest as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

. Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep your weight off

the chair. Standard range of adjustability is 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by

pulling handle up. Slide seat forward or back to accommodate various leg lengths. Release handle to jock, to release. Lumbar

height adjusts 60mm by grabbing exposed tabs and sliding the lumbar support up or down.

Comfort dial has three settings: (1) full-recline; (2) boosted setting that has more resistance than your body is providing; (3) an

upright back lock setting Rectilinear height,

width, pivot and depthadjustable arms.Should have hard, dual wheels that roll smoothly on carpets with 65mm for increased

mobility. Soft, dual-wheel casters as an option for use on hard floors or chair mats.

. SCSIAQ Gold Certified. BIFMA certified

79 Visitor Chair for P.S to Chairmanperson Chamber 2.00 nos 17,630.00 35,260.00

Supplying and placing Medium Back chair as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

. Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep your weight off

the chair. Standard range of adjustability is 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by

pulling handle up. Slide seat forward or back to accommodate various leg lengths. Release handle to jock, to release. Lumbar

height adjusts 60mm by grabbing exposed tabs and sliding the lumbar support up or down.

Comfort dial has three settings: (1) full-recline; (2) boosted setting that has more resistance than your body is providing; (3) an

upright back lock setting Rectilinear height,

width, pivot and depthadjustable arms.Should have hard, dual wheels that roll smoothly on carpets with 65mm for increased

mobility. Soft, dual-wheel casters as an option for use on hard floors or chair mats.

. SCSIAQ Gold Certified. BIFMA certified

80 Sofa for VIP Waiting area

3 seater Dimension: 1800mm(l) x710mm(d)x 770mm(h) 3.00 nos 92,665.00 2,77,995.00

2 seater Dimension: 1530mm(l) x710mm(d)x 770mm(h) 5.00 nos 74,390.00 3,71,950.00

Supplying and placing in position of exclusive premium leatherette modernist classic design lounge seating sofa

with kiln-dried wood framing (Image for reference only). The product should be from manufacturer(OEM) which

have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above

given specification subject to approval of EIC

81 Center Table for VIP Waiting area

Dimension(W)800mm X (D)800mm X (H)385mm 5.00 nos 36,765.00 1,83,825.00

Supplying and placing in position of center Table as perphotograph (only for reference).The product should be

from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The

product should be as per above given specification subject to approval of EIC

82 Side Table for VIP Waiting area

Dimension(W)485mm X (D)485mm X (H)490mm 9.00 nos 28,810.00 2,59,290.00

Supplying and placing in position of side Table as perphotograph (only for reference).The product should be

from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The

product should be as per above given specification subject to approval of EIC

83 Main table for Member's Chamber-01 to 08

Main Table Dimension:(L)2400mm X (D)1130mm X (H)770mm 8.00 nos 3,10,890.00 24,87,120.00

Side Runner Dimension: :(L)1200mm X (D)600mm X (H)770mm

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying, and placing in position of table as perphotograph (only for reference). Table top thkness 80mm , side

panel/gable end in 70mm thk mdf with veneer glossy finish. Main table and side runner having a skirting

@120mm thk with gives a rich look. The office desk comes with the side runner having enough storage

space.The side runner top with a thickness of 80mm thk that gives the great look . Side table, side panel,

shelves,drawers made up of 18mm thk mdf with venner finish. Table having a provision of Pedestal of size: 400(L)

X 500(D) X 660(H) having three drawers to store essential & undestructure made out of 18mm thk mdf with

venner finish .Drawers have the stylish handle which enhance the look. Material & Subtype:Engineered Wood -

Medium Density Fibre Board, Colour & Colour Family:Red - Cherry.side storage unit having a side panel, one

drawer , one shutter & one shelf of 18mm thk mdf with venner finish. The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

84 Back Storage for Member's Chamber-01 to 08

Supplying, and placing in position of back storage as perphotograph (only for reference)/drawing. Bookshelf

made out of 18mm thk laminated HDHMR board with 2mm thk pvc edge banding . The lower cabinets

provisioned with openable shutters with shelf , D shape handles, locking arrangements and also provisioned with

open storage with shelf in it. The upper area to have open shelves for display. The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt glue.The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

85 Main Chair for Member's Chamber-01 to 08 8.00 nos 47,622.50 3,80,980.00

Supply and placeing Chair with Headrest as per image (for reference only). Overall Dimensions, depth shall be 559mm D to

616mm D, width shall be 724mm W, Height shall be 947mm H to 1067mm H. Backrest height from seat shall be a minimum of

578mm. Backrest width shall be a minimum of 485mm (at narrowest point). Chair shall be standard with an adjustable lumbar

with a height adjustment range of 108mm from 153mm to 261mm. Product shall have a five-star base with a minimum dimension

of 661mm. Casters shall be at least 65mm diameter for ease of mobility. Seat foam shall be of min. 64kg/cu m density of

polyurethane foam which provides the proper amount of support and prevents the user from bottoming out on the seat.

•Product shall be at least BIFMA certified.

86 Visitor Chair for Member's Chamber-01 to 08 32.00 nos 42,247.50 13,51,920.00

Supply and placeing Chair as per image (for reference only). Overall Dimensions, depth shall be 559mm D to 616mm D, width

shall be 724mm W, Height shall be 947mm H to 1067mm H. Backrest height from seat shall be a minimum of 578mm. Backrest

width shall be a minimum of 485mm (at narrowest point). Chair shall be standard with an adjustable lumbar with a height

adjustment range of 108mm from 153mm to 261mm. Product shall have a five-star base with a minimum dimension of 661mm.

Casters shall be at least 65mm diameter for ease of mobility. Seat foam shall be of 64kg/cu m density of polyurethane foam

which provides the proper amount of support and prevents the user from bottoming out on the seat.

•Product shall be at least BIFMA certified

87 Sofa for Member's Chamber-01 to 08

3 seater Dimension (W)1810mm X (D)830mm X (H)805mm 8.00 nos 1,30,290.00 10,42,320.00

1 seater Dimension (W)755mm X (D)830mm X (H)805mm 8.00 nos 72,240.00 5,77,920.00

Supplying & placing in position of sofa as per image.a sofa tailored by master upholsterers to be a clean-

lined,modern and supremely comfortable retreat. Its timeless silhouette wrapped in sumptuous top-grain

genuine leather features curved arms and a generously plush backrest.Material & Subtype Leather

Frame Material Engineered Wood,Solid Wood, Upholstery Material Leather, Seat Material Leather, Leg Material

Solid Wood, Finish Matte, Colour & Colour Family White - Cream,Seating Height 465mm. The seat cushion is

made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic

webbing. Thethread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of

28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free &

soft.The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/

AIOTA Certification.The product should be as per above given specification subject to approval of EIC

88 Center Table for Member's Chamber-01 to 08

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Dimension (W)1080mm X (D)550mm X (H)450mm 8.00 nos 41,280.00 3,30,240.00

Supplying and placing in position of centre table as perphotograph (only for reference). 10mm thick tempered

Glass tabletop. The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO

Certification/ AIOTA Certification.The product should be as per above given specification subject to approval

89 Side Table for Member's Chamber-01 to 08

Supplying & placing in position of side table as per image.Made from 10mm thick tempered Glass with Beech

wood legs.The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO

Certification/ AIOTA Certification.The product should be as per above given specification subject to approval

90 Coffee Table Set for Member's Chamber-01 to 08

Chair Dimension: 640mm(L) x 530mm(D) x 560mm(H) 8.00 set 53,535.00 4,28,280.00

Table Dimension (Dia) 600mm X (H) 610mm

Supplying & placing in position coffee table of size : - (Dia)600mm X (H)610mm with two matching chairs. The

product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA

Certification.The product should be as per above given specification subject to approval of EIC

91 Coat Stand for Member's Chamber-01 to 08 8.00 nos 20,640.00 1,65,120.00

Supplying and placing in position Of coat stand of size: 500mm(L) x 500mm(D) x 1650mm(H) as per image or as

approved by EIC. The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO

Certification/ AIOTA Certification.The product should be as per above given specification subject to approval

92 Meeting Table

Supplying, and placing in position of meeting table as perphotograph (only for reference)/drawing. The table

top are made out of 36mm thk laminated HDHMR board table top with 2mm thk pvc edge banding. Table top

supported with 32mm Side panel & 25 mm thk Modesty panel with 2mm thk PVC edge banding.Providing metal

wire raceway & junction connectivity of wires & cables also having a provision of 6 Module Flip top cover.The

product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA

Certification.The product should be as per above given specification subject to approval of EIC

93 Main Chair for Meeting room 1.00 nos 33,325.00 33,325.00

Supply and Place chair with headrest as per image.

•Chairs shall meet or exceed all ANSI/BIFMA certification

•Overall width shall be 597mm (23-1/2”) to 685.8mm ( 27“). Height Chairs: 927mm (36-1/2”) to 1047.8mm (41-1/4”). •Backrest

height from seat shall be a minimum of 546mm (21-1/2”).

•Backrest width shall be a minimum of 438mm (17-1/4”) at narrowest point. • Adjustable lumbar shall offer a height adjustment

range of 57mm (2-1/4”) from 165mm (6-1/2”) to 222.3mm (8-3/4”).

•A pneumatic cylinder shall be used to accomplish a 127mm (5”) seat height adjustment range between 16-1/2”-21-1/2” .

•Seat shall include a 57mm (2-1/4”) seat depth adjustment within a range of 15-1/2” to 17-3/4”

•Seat pan angle shall be 2º to keep the user's torso-thigh angle greater than 90º Base shall be a five-star base with a

minimum dimension of 667mm (26-1/4”).

94 Visitor Chair for Meeting room 10.00 nos 31,175.00 3,11,750.00

Supply and Place chair as per image. (for reference only)

•Chairs shall meet or exceed all ANSI/BIFMA •Overall depth shall be 533mm (21”) to 603mm (23-3/4”)

•Overall width shall be 597mm (23-1/2”) to 685.8mm ( 27“). Height Chairs: 927mm (36-1/2”) to 1047.8mm (41-1/4”). •Backrest height from seat

shall be a minimum of 546mm (21-1/2”).

•Backrest width shall be a minimum of 438mm (17-1/4”) at narrowest point. • Back tension and recline control knob for easy user adjustment.

Three positions shall be engaged at each audible click when the knob is turned. Adjustable lumbar shall offer a height adjustment range of

•A pneumatic cylinder shall be used to accomplish a 127mm (5”) seat height adjustment range between 16-1/2”-21-1/2” . •Seat shall include

a 57mm (2-1/4”) seat depth adjustment within a range of 15-1/2” to 17-3/4” .

•Base shall be a five-star base with a minimum dimension of 667mm (26-1/4”).

95 Visitor Chair for Meeting room(along the wall) 6.00 nos 26,337.50 1,58,025.00

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X

(H)990mmas per Image. Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever, Base:Cantilever

Frame, Base Type:Cantilever, Maximum Seating Height:485mm.The Seat & back are made up of 12mm thk hot

pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3.

The backrest has a foam of 28kg/m3.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

96 Main Table for Sr. PPS Cabin

Main Table Dimension (L) 2100mm X (D) 900mm X (H)750mm 1.00 nos 1,37,170.00 1,37,170.00

Side Runer Dimension (L)1200mm X (D) 450mm X (H) 750mm

Supplying, and placing in position of main Table as per Image/ drawing.The Table top and side panel are made

out of 50mm thk laminated HDHMR board with 2mm thk pvc edge banding & modesty panel is made up of

18mm thick Laminated HDHMR board with laminate of approved shade .The working edges shall be provided

with machine pressed 2mm thick PVC edging using special hot melt glue. Provision of 3 drawer mobile pedestal

(size:- L-400mm x D-450mm x H-600mm) attached to the table top. Pedestal Unit have a combination of 2

drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick laminated HDHMR board

with provision of handles & central Locking arrangement. The table have a provision of free standing Side

Storage of size 1200mm L x 450mm D x 750mm Ht., Storage Top made out of 18mm thick Laminated HDHMR

board and rest all storage to be made out of 18 mm thick laminated HDHMR board . All exposed edges shall

be provided with machine pressed 2 mm thick PVC lipping glued with hot melt glue. Storage having a provision

of 3 drawer unit, one openable shutter with D shape handle & central locking arrangement, one open storage

with shelf in it.The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO

Certification/ AIOTA Certification.The product should be as per above given specification subject to approval

97 Back Storage for Sr. PPS Cabin

Dimension: 2100mm(L) X 450mm(D) x 750mm(H) 1.00 nos 41,387.50 41,387.50

Supplying, and placing in position of medium height storage @ 750mm height as perphotograph (only for

reference)/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top

shall be made from 18 mm thick Laminated HDHMR board with laminate of approved shade and rest of the

sides as well as shelves and shutter to be made up of 18 mm thick Laminated HDHMR board with laminate of

approved shade while back to be made of 8 mm thick Laminated HDHMR board with laminate of approved

shade. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD

shape handles & locking arrangement.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

98 Main Chair for Sr. PPS Cabin 1.00 nos 38,700.00 38,700.00

Supply and placeing Chair with Headrest as per image. Overall Dimensions, depth shall be 559mm D to 616mm D, width shall be

724mm W, Height shall be 947mm H to 1067mm H. Backrest height from seat shall be a minimum of 578mm. Backrest width shall

be a minimum of 485mm (at narrowest point). Chair shall be standard with an adjustable lumbar with a height adjustment range

of 108mm from 153mm to 261mm. Chair’s back tension and recline control knob for easy user. adjustment. Four positions shall be

engaged at each audible click when the knob is turned: •Back support shall be provided via a system of exposed integrated

flexors vs. frame and suspension material. A pneumatic cylinder shall be used to accomplish a 127mm seat height adjustment

range between 407mm -547mm (per HFES 100). Passive seat edge angle shall allow the front edge of the seat to flex 39mm

relieving pressure behind the thighs, allowing proper blood circulation to the user’s legs and feet. The angle between the seat

and backrest shall fall between 98° and 116°. Product shall have a five-star base with a minimum dimension of 661mm. Casters

shall be at least 65mm diameter for ease of mobility. Seat foam shall be constructed of 64kg/cu m density of polyurethane foam

which provides the proper amount of support and prevents the user from bottoming out on the seat.

•Product shall be at least BIFMA certified

99 Visitor Chair for Sr. PPS Cabin 3.00 nos 35,475.00 1,06,425.00

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supply and placeing Chair as per image. Overall Dimensions, depth shall be 559mm D to 616mm D, width shall be 724mm W,

Height shall be 947mm H to 1067mm H. Backrest height from seat shall be a minimum of 578mm. Backrest width shall be a

minimum of 485mm (at narrowest point). Chair shall be standard with an adjustable lumbar with a height adjustment range of

108mm from 153mm to 261mm. Chair’s back tension and recline control knob for easy user adjustment. Four positions shall be

engaged at each audible click when the knob is turned: •A pneumatic cylinder shall be used to accomplish a 127mm seat

height adjustment range between 407mm -547mm . Product shall have a five-star base with a minimum dimension of 661mm.

Casters shall be at least 65mm diameter for ease of mobility. Seat foam shall be of 64kg/cu m density of polyurethane foam

•Product shall be at least BIFMA certified.

100 Sofa for Sr. PPS Cabin

3 seater Dimension:1940mm (L) x880mm (D) x 950mm (H) 1.00 nos 85,570.00 85,570.00

Supplying and placing in position of exclusive premium leatherette modernist classic design lounge seating sofa

with kiln-dried wood framing. Under structure frame shall be constructed from 18 mm thick kiln-dried german

beech wood framing is highly durable. the complete structure shall be covered by p.u.foam fixed with adhesive

glue, the frame shall be padded with high resilience polyurethane foam having 40 +/- 5 density in seat it shall be

stack foam of 50mm thk, 50mm thick back foam having 40 +/- 5 density foam used, there shall be cushion arm

50mm thick provided padded with high resilience polyurethane foam having density 40 +/- 5. the complete

stack foam structure shall be covered with premium leatherette in brown-eerie black, beige-pebble beige,

brown-burnt umber colour,( seat : 510 mm(d) x 460mm(h) , back height @ 550mm ). The product should be from

manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product

should be as per above given specification subject to approval of EIC

101 Center Table for Sr. PPS Cabin

Dimension (L)1130mm X (W)630mm X (H)410mm 1.00 nos 33,110.00 33,110.00

Supplying and placing in position of centre table as perphotograph (only for reference). The centre table made

of solid wood (First Grade Teak Wood) in PU matte polish.The Toughened Glass placed the top of the table is

8mm thk. The product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO

Certification/ AIOTA Certification.The product should be as per above given specification subject to approval

102 Side Table for Sr. PPS Cabin

Dimension(L)680mm X (W)530mm X (H)450mm 1.00 nos 25,800.00 25,800.00

Supplying, and placing in position of side table as per Image.The side table made of solid wood (First Grade

Teak Wood) in PU matte polish.The Toughened Toughened Glass placed the top of the table in 8mm thk. The

product should be from manufacturer(OEM) which have BIFMA Certification /GREEN PRO Certification/ AIOTA

Certification.The product should be as per above given specification subject to approval of EIC

103 Main Table for PPS to Member /Court Master/Asst. Registar cabin/ P.S Cabin

Main Table Dimension : 1500mm(L) X 750mm(D) X 750mm(H) 11.00 nos 78,475.00 8,63,225.00

Overall Side Unit Dimension : 1500mm(L) X 450mm(D) x 750mm(H)

Supplying, and placing in position of main Table as per drawing/image. Modular tables of size 1500mm(L) x

750mm(D) x 750mm(H). The Table top are made out of 25mm thk laminated HDHMR board with 2mm thk pvc

edge banding & side panel & modesty panel are made up of 18mm thick Laminated HDHMR board with

laminate of approved shade .The working edges shall be provided with machine pressed 2mm thick PVC

edging using special hot melt glue . The table have a provision of Side Storage of size 900mm L x 450mm D x

750mm Ht., Storage Top are made out of 25mm thick Laminated HDHMR board and rest all storage to be made

out of 18 mm thick laminated HDHMR board . All exposed edges shall be provided with machine pressed 2 mm

thick PVC lipping glued with hot melt glue. Side Storage having a provision of 3 drawer unit of size: 400mm(L) x

450mm(D) x 675mm(H) attached to the side storage top with the help of shiny metal rods. Pedestal Unit have a

combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick laminated

HDHMR board with provision of central Locking arrangement.The product should be from manufacturer(OEM)

which have BIFMA Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per

above given specification subject to approval of EIC

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

104 Back Storage for PPS to Member/Court Master/Asst. Registar cabin/ P.S Cabin

Supplying, and placing in position of medium height storage @ 750mm height as perphotograph (only for

reference)/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top

shall be made from 18 mm thick Laminated HDHMR board with laminate of approved shade and rest of the

sides as well as shelves and shutter to be made up of 18 mm thick Laminated HDHMR board with laminate of

approved shade while back to be made of 8 mm thick Laminated HDHMR board with laminate of approved

shade. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD

shape handles & locking arrangement.The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

105 Main Chair for PPS to Member/Court Master/Asst. Registar cabin/ P.S Cabin 11.00 nos 19,457.50 2,14,032.50

Supplying and placing chair with headrest as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

. Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep your weight off

the chair. Standard range of adjustability is 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by

pulling handle up. Slide seat forward or back to accommodate various leg lengths. Release handle to jock, to release. Lumbar

height adjusts 60mm by grabbing exposed tabs and sliding the lumbar support up or down.

Comfort dial has three settings: (1) full-recline; (2) boosted setting that has more resistance than your body is providing; (3) an

upright back lock setting Rectilinear height,

width, pivot and depthadjustable arms.Should have hard, dual wheels that roll smoothly on carpets with 65mm for increased

mobility. Soft, dual-wheel casters as an option for use on hard floors or chair mats.

. SCSIAQ Gold Certified. BIFMA certified

106 Vistor Chair for PPS to Member/Court Master/Asst. Registar cabin/ P.S Cabin 10.00 nos 17,630.00 1,76,300.00

Supplying and placing Medium Back chair as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

. Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep your weight off

the chair. Standard range of adjustability is 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by

pulling handle up. Slide seat forward or back to accommodate various leg lengths. Release handle to jock, to release. Lumbar

height adjusts 60mm by grabbing exposed tabs and sliding the lumbar support up or down.

Comfort dial has three settings: (1) full-recline; (2) boosted setting that has more resistance than your body is providing; (3) an

upright back lock setting Rectilinear height,

width, pivot and depthadjustable arms.Should have hard, dual wheels that roll smoothly on carpets with 65mm for increased

mobility. Soft, dual-wheel casters as an option for use on hard floors or chair mats.

. SCSIAQ Gold Certified. BIFMA certified

107 Chair for Staff area (passage area) 45.00 nos 13,975.00 6,28,875.00

Supplying and placing Medium Back chair as per image with Overall Depth 507mm to

557mm, Width 660mm, Height 950mm, Seat Depth 487mm, Back Width 349 and Height from seat 349mm.

. Seat height adjusts pneumatically. To lower, hold handle up while seated. To raise, hold handle up and keep your weight off

the chair. Standard range of adjustability is 120mm, from 420mm H – 540mm H. Seat depth adjusts 55mm (429mm to 487mm) by

pulling handle up. Slide seat forward or back to accommodate various leg lengths. Release handle to jock, to release. Lumbar

height adjusts 60mm by grabbing exposed tabs and sliding the lumbar support up or down.

Comfort dial has three settings: (1) full-recline; (2) boosted setting that has more resistance than your body is providing; (3) an

upright back lock setting Rectilinear height,

width, pivot and depthadjustable arms.Should have hard, dual wheels that roll smoothly on carpets with 65mm for increased

mobility. Soft, dual-wheel casters as an option for use on hard floors or chair mats.

. SCSIAQ Gold Certified. BIFMA certified

108 Pigeon Hole Storage for Dispatch room

Digitally signed by AVDHESH

S.No. Specification Qty. unit Amount

Supplying, and placing in position of pigeon hole storage as perphotograph (only for reference)/drawing . The

storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm

thick Laminated HDHMR board with laminate of approved shade and rest of the sides as well as shelves and

vertical partitions to be made up of 18 mm thick Laminated HDHMR board with laminate of approved shade

while back to be made of 8 mm thick Laminated HDHMR board with laminate of approved shade. All edges to

be provided with 2 mm thick PVC lipping. The product should be from manufacturer(OEM) which have BIFMA

Certification /GREEN PRO Certification/ AIOTA Certification.The product should be as per above given

specification subject to approval of EIC

109 Table with High Stool

Rectangular LPL table top with 2mm thick ABS edge banding

Metal powder coated Intuity A legs

Metal soft closing fliptop with cable tray and metal vertical cable riser

BIFMA Certified

PP shell and back with powder coated base

Compactor-Overall Dimesnion: 900mm(l) X 450mm (D) x 2080mm(H)

Supplying, and placing in position of compactor as perphotograph (only for reference)/drawing . Designed for

long life and easy part replacement. Uses one common aisle spacethat optimizes available space. PU drive

wheel for firm grip and hassle-free mobility. Channel stoppers prevent derailment. Label holders with neat

transparent acrylic sheets facilitate easy identification. Locking stiffeners for centralised locking ensures safety of

documents. Rotating locks with easy to identify lock/unlock positions ensures safety. Shims providedbelow the

rails for right laveling All the shelf & body shall be made out of 0.8mm thk ms powder coated (50 microns

thickness) od approved shade.The product should be as per above given specification subject to approval of

Total Amount Inclusive GST@18% In Rs= 4,14,43,049.52

Total Amount Inclusive GST@18% In Rs= 4,14,43,049.52

Digitally signed by AVDHESH

Name of Work: Interior and Fitout work for Lokpal Of India at A-400&A-500, World Trade Centre,Nauroji Nagar,

BOQ FOR PLUMBING & FIRE FIGHTING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 0.00 18,30,223.10

B WATER SUPPLY 8,16,721.00 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 10,34,442.25 23,000.00

D SPRINKLER PIPING & ACCESSORIES 33,23,575.00 4,42,129.25

Total Cost ( Carried Forward) in Rs. 74,70,090.61

Digitally signed by AVDHESH

Name of Work: Interior and Fitout work for Lokpal Of India at A-400&A-500, World Trade Centre,Nauroji Nagar, New Delhi

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Supply, installation, testing and commissioning of glazed vitreous

china single trap syphonic pattern having back inlet, supporting

chair, wall hung water closet complete with all internal fittings/

accessories and CP brass flush bend (European type) water

1 MR closet with seat and lid, with C.P. brass hinges and rubber

buffers, adapter, rubber joints fixed to W.C., C.P. brass screwed

washers including cutting and making good the walls and floors

wherever required and HDPE WC pan connector including

jointing with white cement complete in all respects.

Wall hung W.C. pan (White colour)with white plastic seat & lid

"Thermoset moulded ( bakelite ) IS 2548 Part I Each 10 27,825.34 2,78,253.40

Supply, installation, testing and commissioning of concealed

cistern including flush plate and all internal fittings/ accessories

including cutting and making good the walls and floors

wherever required complete in all respects. Each 10 12,365.33 1,23,653.33

Supply, installation, testing and commissioning of glazed vitreous

china wash basin with R.S. or C.I. brackets painted white, 32mm

C.P. brass waste of standard pattern , C.P brass wall flange 32

mm dia. C.P. brass bottle trap and union 32 mm dia C.P. pipes

to wall flange. complete including cutting and making good the

walls wherever required.

3.1 Undercounter wash basin Each 2 8,363.70 16,727.40

3.2 Table top wash basin Each 8 15,063.73 1,20,509.83

Supply, installation, testing and commissioning of 15mm C.P.

4 MR brass single hole wash basin mixer without popup waste system

with 450mm long copper pipes and brass nut Each 10 6,064.37 60,643.73

Providing & fixing toilet paper holding including cutting and

making good the walls. Each 10 1,579.64 15,796.37

Providing & fixing Horizontal liquid soap dispenser with stainless

6 MR steel lid and brackets fixed to wooden cleats with C.P. brass

Providing & fixing C.P. brass coat hooks fixed on toilet door with

C.P. brass screws Each 10 618.70 6,187.00

Providing & fixing beveled edge mirror 5.5mm thick of superior

quality plate glass complete with 6mm thick marine ply sheet

8 MR ground fixed to wooden cleats with CP brass screws and

washerswith 40 mm wide teak wood frame as per design

including polishing Sqm 15 2,815.06 42,225.94

Providing & fixing Hand Shower (Health Faucet) with 8mm dia,

1M long PVC tube and wall hook CP brass wall flange Each 10 1,798.11 17,981.14

Digitally signed by AVDHESH

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing & fixing, testing and commissioning of storage type

electric water heater with automatic thermostatic control electric

element, pressure release valve, brackets fixed to expansion

fasteners with M.S. nuts and bolts all complete including cutting

and making good the walls wherever required.

05 litres capacity (Horizontal /Vertical type1.5 kw electrical load). Each 10 12,085.22 1,20,852.20

Providing & fixing wall mounted 25 mm dia Stainless steel coated

11 MR grab bar including cutting & making good the walls(size 450mm

Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall

flange of approved quality. Each 10 1,605.43 16,054.33

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of

Automatic Fragrance Dispenser machine complete with refill can

and 'C' size battery (2 Nos) for operation fixed to wooden cleats

with CP brass screws Each 10 4,623.87 46,238.66

Providing and fixing of stainless steel finish Paper Towel Dispenser

14 MR having capacity of 300-350 paper towels fixed to wooden cleats

with C.P. brass screws Each 10 5,556.35 55,563.48

Providing and fixing of wall mounted fully automatic hand dryer

15 MR in SS/ black finish as per approval complete will all accessories.

Providing, installing, testing and commissioning of package

sump unit with built-in submersible drainage pump, nonreturn

valves, cutter, electrical panel/starter cabeling,common header,

15 MR all as per standard design and including making connections

with grease separator/sink waste pipes drain pipe upto sewer

shaft connections to be provided and make it operational

complete in all respect. Nos 10 80,294.79 8,02,947.87

Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary fixtures shall be

selected by Architect/Interior designer/Project manager and the

same shall be binding for execution.

No additional fixing cost shall be paid for change in type of

sanitary fixtures.

Contractor to receive all the above mentioned items & store at

place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 18,30,223.10

Digitally signed by AVDHESH

SUB HEAD B: WATER SUPPLY

SL. DSR Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.)

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

(CPVC) plain & brass threaded fittings including fixing the pipe with

clamps at 1.00 m spacing. This including jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete as

per direction of engineer in charge. .

Internal Work - Exposed on Wall

18.7.3 25 mm nominal outer dia pipes. Metre 160.00 401.55 64,248.00

18.7.4 32 mm nominal outer dia pipes. Metre 270.00 518.75 1,40,062.50

18.7.5 40 mm nominal outer dia pipes. Metre 40.00 702.95 28,118.00

18.7.6 50 mm nominal outer dia pipes. Metre 120.00 934.15 1,12,098.00

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00

2 18.8 m spacing. This including jointing of pipes & fittings with one step

CPVC solvent cement and the cost of cutting chases and making

good the the same including testing of joints complete as per

direction of engineer in charge.

Concealed work oncluding cutting chases and making good the walls

18.8.2 20 mm nominal outer dia pipes. Metre 320.00 537.60 1,72,032.00

18.8.3 25 mm nominal dia Pipes Metre 150.00 627.25 94,087.50

18.8.4 32 mm nominal dia Pipes Metre 200.00 736.30 1,47,260.00

3 18.16 Providing and fixing brass stop cock of approved quality complete.

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end):

Digitally signed by AVDHESH

SL. DSR Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.)

Providing and fixing C.P. bass angle valve for basin mixer and geyser

5 18.53 points of approved quality conforming to I.S:8931 a) 15 mm nominal

Providing and fixing unplasticised P.V.C connection pipe with PTMT

Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 50.00 121.90 6,095.00

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 8,16,721.00

Digitally signed by AVDHESH

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

Providing and fixing cast iron trap of self cleansing design with cast iron

1 screwed down or hinged grating with or without vent arm complete,

including cost of cutting and making good the walls and floors.

100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S as per

2 17.35 Providing and fixing soil, waste and vent pipes.

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.1.2 100mm dia cast (spun) iron S&S pipe Metre 300.00 1,077.40 3,23,220.00

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.2.2 75mm dia cast (spun) iron S&S pipe Metre 250.00 1,042.20 2,60,550.00

Providing and fixing single equal plain junction of reqd. degree with

access door, insertion rubber washer 3mm thick, bolts and nuts complete.

17.43.1.2 Sand cast (spun) iron pipe IS-3989 Each 20.00 731.40 14,628.00

17.43.2.2 Sand cast (spun) iron pipe IS-3989 Each 10.00 573.80 5,738.00

4 17.44 Providing and fixing single equal plain junction of reqd. degree.

17.44.1.2 Sand cast (spun) iron pipe IS-3989 Each 20.00 707.30 14,146.00

17.44.2.2 Sand cast (spun) iron pipe IS-3989 Each 10.00 498.90 4,989.00

Providing and fixing bend of required degree with access door, insertion

rubber washer 3mm thick, bolts and nuts complete.

Digitally signed by AVDHESH

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

17.38.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 20.00 597.60 11,952.00

17.38.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 10.00 453.40 4,534.00

6 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 20.00 439.75 8,795.00

17.39.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 10.00 298.20 2,982.00

7 17.57 Providing and fixing collar.

17.57.1.2 Sand cast (spun) iron pipe S&S IS-3989 Each 20.00 439.75 8,795.00

17.57.2.2 Sand cast (spun) iron pipe S&S IS-3989 Each 10.00 271.45 2,714.50

Providing and fixing MS holder bat clamps of approved design to cast

iron (spun) pipe embedded in and Including cement concrete blocks 10

8 17.37 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) including cost of cutting holes and making

good the walls etc.

Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps.

including cutting and making good the walls etc.

18.10.5 40 mm nominal bore Metre 20.00 725.15 14,503.00

18.10.6 50 mm nominal bore Metre 80.00 893.20 71,456.00

Painting G.I. Pipes and fittings with two coats of anticorrosive bitumastic

paint of approved quality

18.40.4 32 mm nominal bore Metre 120.00 18.40 2,208.00

Digitally signed by AVDHESH

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

18.40.5 40 mm nominal bore Metre 20.00 20.95 419.00

18.40.6 50 mm nominal bore Metre 80.00 25.25 2,020.00

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and

12 17.65 vent pipes and fittings with paint of any colour such as chocolate, grey or

buff etc. over a coat of primer (of approval quality) for new work

17.65.1 100mm dia cast (spun) iron S&S pipe Metre 300.00 69.55 20,865.00

17.65.2 75mm dia cast (spun) iron S&S pipe Metre 250.00 52.90 13,225.00

Providing and fixing G.I. Inlet fitting of suitable size with 2 & 3 Nos. G.I.

13 NS Socket 32 & 40 welded G.I. pipe and dipped in hot bitumen complete in

100 mm diameter pipe (Hopper ) Each 20.00 1,150.00 0.00 23,000.00

Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron

pipes & fittings of diameter :.

Providing & filling the joints with spun yarn,cement slurry & cement mortar

1:2(1 cement: 2 fine sand) in SCI/CI pipes.

16 17.48 Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast (spun) iron pipe IS-3989 Each 20.00 798.80 15,976.00

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 10,34,442.25 23,000.00

Digitally signed by AVDHESH

SUB-HEAD - D - SPRINKLER PIPING & ACCESSORIES

DSR Rate NS Rate DSR Amount

SL. NO. DSR/ NS DESCRIPTION OF ITEMS UNIT Qty NS Amount (Rs)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

1 7.0 tapers, nuts bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint

of required shade complete as required :

Supplying, fixing, testing and commissioning of butterfly

valve of PN 1.6 rating with bronze/ gunmetal seat duly ISI

marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

Providing and fixing ISI Marked of approved make Fire

4 NS Extinguishers complete with all accessories as per

manufacturer's specifications.

4.1 CO 2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 8.00 13,940.64 1,11,525.11

Mechanical Foam gas cartridge type. 9 Kg capacity

Digitally signed by AVDHESH

DSR Rate NS Rate DSR Amount

SL. NO. DSR/ NS DESCRIPTION OF ITEMS UNIT Qty NS Amount (Rs)

ABC dry powder stored pressure type 6 kg capacity

Providing, fixing, testing & commissioning of 15mm dia

5 NS quartzoid bulb type sprinklers of rating 68 degree

centigrade with required accessories :

5.4 21.4 Concealed Sprinkler NOS. 650.00 1,397.00 9,08,050.00

Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

(Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

Providing and fixing signages printed on

photoluminescent U1000 aluminium sheet of 1.0 mm (+ -

10%) containing lumigen II as base chemical, covered

7 NS under UV stablized coating and of appropriate size SQ INCH 7,200.00 17.76 1,27,873.85

including fixing on wall, door, ceiling etc. with proper

clamps, hangers, cleats anchor fasteners etc. complete in

all respacts as diercted by Engineer-in-charge

Providing, jointing and testing of automaticaly operated

Halotron fire extinguishers(cap-5kg,temperature rating-

68degc,test pressure-30bar) complete with all

accessories/fittings.

TOTAL CARRIED TO SUMMARY 33,23,575.00 4,42,129.25

Digitally signed by AVDHESH

Name of Work: Interior and Fitout work for Lokpal Of India at A-400&A-500, World Trade Centre,Nauroji Nagar, New Delhi

Summary for E & M Component

Sub Head Descriptions DSR Amounts NDSR Amounts

SH-l EI- Point Wiring, DB, Earthing, Lighting, Cable, Cable Tray, LT Panel 59,74,111 1,10,16,147

SH-ll HVAC- Chilled pipe, Duct, Inulation, Grill,VRF, Split ac 1,22,09,015 31,72,100

SH-Vll LAN/ WIFI 16,70,800 54,51,516

SH-Vlll EPABX 5,99,700 21,97,740

SH-IX DISPLAYS 62,68,513

SH-X AV & VC for Conference Room (only Wiring) - 91,91,444

SH-Xl AV & VC for Court Rooms (only Wiring) - 1,50,000

SH-XlI ITC of Data Center Equipments - 12,30,000

Digitally signed by AVDHESH

Name of Work: Interior and Fitout work for Lokpal Of India at A-400&A-500, World Trade Centre,Nauroji Nagar, New Delhi

Bill of Quantity for E & M Component

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

(SH-I: EI WORKS)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed medium class PVC conduit, with modular

switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without

independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in

surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated

copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

3.3 1.14.3 2X4sq.mm+1X4sq. mm earth wire P/Mtr 2700 334 9,01,800

3.4 1.14.4 2X 6sq.mm+ 1 X6sq. mm earth wire P/Mtr 50 439 21,950

3.5 1.14.5 2X 10sq.mm + 1X 6 sq. mm earth wire P/Mtr 50 570 28,500

3.6 1.14.6 2X 16 sq. mm +1 X 6 sq. mm earth wire P/Mtr 50 772 38,600

3.8 1.14.8 4X 4sq.mm+ 2X 4sq. mm earth wire P/Mtr 50 537 26,850

3.9 1.14.9 4X6sq. mm + 2X6 sq. mm earth wire P/Mtr 25 754 18,850

3.10 1.14.10 4X10sq.mm+2X6 sq. mm earth wire P/Mtr 25 1,005 25,125

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

4.3 1.24.4 3 pin 5/6 A socket outlet Each 990 122 1,20,780

4.4 1.24.5 6 pin 15/16 A socket outlet Each 350 197 68,950

4.5 1.24.7 TV antenna socket outlet Each 30 148 4,440

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate

switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

9 1.31 including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, Each 20 477 9,540

connections etc. as required.

upplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess,

10 1.32 including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, Each 25 586 14,650

connections etc. as required.

Digitally signed by AVDHESH

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

upplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal

enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess,

with chained metal cover for the socket out let and complete with connections, testing and

commissioning etc. as required.

Fabricating, supplying & installation on surface/ recess 2.0 mm thick factory fabricated GI Sheet

raceways height 40 mm and of totally enclosed with 2 mm thick covered. Two lengths of raceways

12 MR. and junction box shall be joined together to make it dust proof. Chipping and removing screed to

install the raceways in floor, including removal and disposing of debris / fixing in ceiling along with

suspender and accessories as per instruction of Engineer in charge.

12.5 e 100 mm (wide) x 40 mm (height) P/Mtr 320 997 3,19,040

12.6 f 50 mm (wide) x 40 mm (height) P/Mtr 519 658 3,41,502

Fabricating, supplying & installation on surface/ recess 2.0 mm thick factory fabricated GI Sheet

raceways height 40 mm and of totally enclosed with 2 mm thick covered. Two lengths of raceways

13 MR. and junction box shall be joined together to make it dust proof. Chipping and removing screed to

install the junction box in floor, including removal and disposing of debris / fixing in ceiling along with

suspender and accessories as per instruction of Engineer in charge.

13.1 a 500 mm (wide) x 500 mm (length) X 40 mm (height) Each 60 2,760 1,65,600

13.2 b 350 mm (wide) x 350 mm (length) X 40 mm (height) Each 50 2,290 1,14,500

13.3 c 250 mm (wide) x 300 mm (length) X 40 mm (height) Each 35 1,870 65,450

13.4 d 200 mm (wide) x 200 mm (length) X 40 mm (height) Each 50 1,660 83,000

13.5 e 150 mm (wide) x 150 mm (length) X 40 mm (height) Each 80 1,270 1,01,600

13.6 f 100 mm (wide) x 100 mm (length) X 40 mm (height) Each 180 1,080 1,94,400

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess

14 1.2 including painting in case of surface conduit, or cutting the wall and making good the same in case

of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

15 1.21 surface/recess including cutting the wall and making good the same in case of recessed conduit as

Providing and fixing in position the following pvc flexible conduits including all fixing accessories as

16.1 a 20 mm dia flexible conduit with end couplers P/Mtr 250 35 8,750

16.2 b 25 mm dia flexible conduit with end couplers P/Mtr 290 45 13,050

16.3 c 32 mm dia flexible conduit with end couplers P/Mtr 120 65 7,800

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in

the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V,

18 2.3 on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

18.1 2.3.3 12 way , Double door Each 2 2,315 4,630

18.2 2.3.4 16 way , Double door Each 2 3,141 6,282

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution

board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Digitally signed by AVDHESH

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

19.4 MR 12 way (4 + 36), Double door Each 6 12,570 75,420

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB

distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned

20 2.5 copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and

incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB

distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned

MR copper bus bar, common neutral link, earth bar, din bar for mounting 160A, 35ka,MCCBs (but without

MCCBs and incomer ) as required . (Note : Vertical type MCCB TPDB is normally used where 3 phase

outlets are required.)

a 8 way (4 + 24), Double door Each 2 16,165 32,330

b 12 way (4 + 36), Double door Each 4 22,833 91,332

Providing and fixing following rating and breaking capacity and pole MCCB with thermo

21 2.2 magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in

cubicle panel, making connections, etc. as required.

Supplying and fixing 63 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable

22 for inductive load of following poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

22.1 Triple pole Each 64 1,980 1,26,720

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable

23 2.10 for inductive load of following poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supply, installation, testing and commissioning of the following sizes of PVC trunking system with end

caps, bends, elbows complete as required.

Providing and fixing of Gel-Chemical Earthing Electrode of G.I. made as pipe in pipe

technology(IS:3043 : 1987)duly CPRI Approved as per following specification:

Length - (3000 mm)

DIA (outer) - (80 mm)

DIA (Inner) - (40 mm)

25 MR DIA-Terminal Strip Hole - (25 mm) Each 4 46,890 1,87,560

Space Inside Electrodes - (Filled with Conductive Mixture)

Hot Dip Galvanizing - (70 - 100 Microns)

And earth enhancing compound should be used to treat the soil for lowering the effective ground

impedance 50Kg for each earth pit to make it maintenance free and to minimize the ground voltage

potential rise and pit covered with PVC Cover.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including

connection with brass nut bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including

connection with G.I. nut, bolt, spring, washer excavation and re- filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

30 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. P/Mtr 100 70 7,000

Supplying & Laying of following sizes copper conductor PVC insulated PVC

unsheathed unarmoured flexible cables confirming to IS: 7098 (Part-I)

1988 of 1.1 KV in existing open masonry duct/surface/raceways/pipe etc complete as

Digitally signed by AVDHESH

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supply, installation, testing and commissioning of copper Earth busbar of size 50 X 5 X 400

32 mm in suitable size MS sheet enclosure made out of 1.6mm thick MS Sheet duly painted with Each 4 3,502 14,008

locking arrangement etc. complete as reqd.

Supplying, Installation, Testing & Commissioning of recessed type LED downlighter having the following

specifications etc. complete as reqd: -

a) Total Lumens : Not less than 1600 Lumens

b) System lumens efficacy : Not less than 105 lumen P/Watt

c) Driver efficiency : Not less than 85%

d) THD : Not more than 10%

e) CRI : Not less than 80

f) LED Life : Not less than 50000 hours @ LM 70%

g) Colour temperature : 4000-5500 K

h) Operating voltage range : 140 Volt to 270 Volt

i) Installation type : Recessed suitable for armstrong/grid/POP/Gypsum Ceiling

j) Material of construction for housing : Pressure diecast aluminium

k) Material of construction for cover : High quality polycarbonate opal concave diffuser.

l) Reflector - High reflective polycarbonate conical shaped

m) Electronic Driver : Integral type (Constant current supply)

n) Internal surge protection : Not less than 2.5 kV

o) Ingress protection (IP) : Not less than IP 20.

p) Size of Luminare - Dia 158mm x Height 90mm (Plus Minus 5%)

Supplying, Installation, Testing & Commissioning of recessed/pendent type LED Linear having the

following specifications etc. complete as reqd: -a) Total Lumens : Not less than 2625

Lumensb) System lumens efficacy : Not less than 105 lumen P/Watt c) Driver efficiency : Not less

than 85%d) THD : Not more than 10%e) CRI : Not less than 80f) LED Life : Not less than 50000 hours

@ LM 70%g) Colour tempreature : 4000-5500 Kh) Operating voltage range : 140 Volt to

34 270 Volti) Installation type : Recessed suitable for armstrong/grid/POP/Gypsum Ceilingj) Material Each 20 7,166 1,43,320

of construction for housing : Extruded Aluminiumk) Material of construction for cover/Optics :

PMMA OPal Diffuserm) Electronic Driver : Integral type (Constant current supply)n) Internal surge

protection : Not less than 2.5 kVo) Ingress protection (IP) : Not less than IP 20.p) Size of Luminare -

Length 1200mm x Width 67mm i/c

flange (Plus Minus 5%)

Supplying, Installation, Testing & Commissioning of recessed type LED Linear having the following

specifications etc. complete as reqd: -

a) Total Lumens : Not less than 3780 Lumens

b) System lumens efficacy : Not less than 105 lumen P/Watt

c) Driver efficiency : Not less than 85%

d) THD : Not more than 10%

e) CRI : Not less than 80

f) LED Life : Not less than 50000 hours @ LM 70%

35 g) Colour temperature : 4000-5500 K Each 20 9,233 1,84,660

h) Operating voltage range : 140 Volt to 270 Volt

i) Installation type : Recessed suitable for armstrong/grid/POP/Gypsum Ceiling

j) Material of construction for housing : Extruded Aluminium

k) Material of construction for cover/Optics : PMMA OPal Diffuser

m) Electronic Driver : Integral type (Constant current supply)

n) Internal surge protection : Not less than 2.5 kV

o) Ingress protection (IP) : Not less than IP 20.

p) Size of Luminare - Length 1800mm x Width 67mm i/c flange (Plus Minus 5%)

Digitally signed by AVDHESH

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supplying, Installation, Testing & Commissioning of suspended type LED Linear Direct and indirect

having the following specifications etc. complete as reqd: -

a) Total Lumens : Not less than 3300 Lumens

b) System lumens efficacy : Not less than 110 lumen P/Watt

c) Driver efficiency : Not less than 85%

d) THD : Not more than 10%

e) CRI : Not less than 80

f) LED Life : Not less than 50000 hours @ LM 70%

g) Colour temperature : 4000-5500 K

h) Operating voltage range : 140 Volt to 270 Volt

i) Installation type : Suspended type

j) Material of construction for housing : Extruded Aluminium

k) Material of construction for cover/Optics :

Special Micro reflector optics

l) UGR - Not more than 13

m) Distribution - Upward and downward light ratio - 54:45

n) Electronic Driver : Integral type (Constant current supply)

o) Internal surge protection : Not less than 2.5 kV

p) Ingress protection (IP) : Not less than IP 20.

q) Size of Luminare - Length 1200mm x Width 38mm (Plus Minus 5%)

SITC of 1'X4' recessed mounted Luminaire with Maximum 36 Watt with Lumen output of 3600 lumen.

The product should be SMD based and have non integral isolated driver with 2KV inbuilt surge

37 protection. THD<10%, PF >0.9,Product should have life class of 50K burning hour at L70 B50 Each 60 3,500 2,10,000

parameter, Luminiare operating temp 0 D to 45D. Internal wiring should have teflon coted multi strand

wires and external wire should have PVC coated multistrand wires.

Supply, Installation, Testing and Commisioning of Suspended /surface/Recessed type linear Luminaire

of size 72mm (N.S.), Linear ultra modular fixture made up of extruded aluminium housing with luminare

efficasy more than 100 LPW, CRI >80, CCT of 5700K. suitable for 220 V, 50 Hz, The luminare rated life

38 (L70) >50000 Hours with High efficiency driver with inbuild surge protection, over voltage protection, rmt 180 3,450 6,21,000

short circuit protection and operating at >0.95 .making suitable arrangement for fixing including

connection with 3 x 1.5 sq.mm. The price shall include all accessories including jointing kit for uniform

continuous lines of light across ceiling etc complete in all respect

Providing & Fixing Coverings (Ceiling & Wall) Made out of Polyester Kintted fabric Coated with

polyurethane (PU). The Fibric width 2m,3m,4.1m,&5.1m with Weight of 200gm/m^2. thickness of

0.3mm. The appearance of fabric is Matl. smooth and uniform with blance color and ligth transmission

of 50%. The tear strength of fabric should be accordance to CH. 4.5daN; TR: 6.5 daN. The fire Railing

should be accordance to B-S1, do. The febric should be humidity ressistant and free of cercinogenic

subtance (CMR) or volatile organic compounds (VOC's). At lableing in accordance with the French

decree no, 2011- 321, Oeko -Tex standar100 certified. The fabric should be paintabe/printable with

approved manufacturer guidelines with 10-year manufacture guarantee. the Installation of fabric

should be dry installation 7done at room tamperature using CLIPSO PVC, ASB tension profiles P.CC/P-

C10QS/P-C11QS/P-CCB022/P-B1/P-CC1P. There are several lighting options available including

various LED options and fluorescent lighting. When Positioned properly. LED Lighting modules provide

an even light flow, casting no shadowns or hot spots. coverings are used for a variety of aluminated

applications, including but not limited to walls, ceiling, lightboxs or wall frames. coverings can

enhance your door with a variety of spacial effects fiber optics or changinglights, or create a

statement piece incorporating custom printing. The cost of electrical cove light fixtures is included in the

Suppling, installation, testing and commissioning of electrically operated on 220 V, 50 Hz, AC Supply

illuminated exit signage conforming to IS- 10322 for the bank premises ceiling having the following

specifications etc. complete as reqd. (Make:- Prolite Auto Glow, Model No.FASCIA-E)

a. Housing extruded aluminum alloy.

40 b. Diffuser cum message panel-CAD design prnting on 8 mm crystal acrylic sheet. Each 20 7,602 1,52,040

c. Battery-lithium ion rechargeable battery.

d. Backup time 180 minutes.

e. Charging type - constant current charger.

f. Recharging cycle - 16 to 24 Hours.

Supply, installation, testing and commissioning of LED flexistrip having minimum rating 9.6W/mtr,

41 CCT 3000K/4000K, 5 mtr roll with LED Driver lumens Each 50 2,067 1,03,350

nots less than 3800, luminous efficacy not less than 80 Lumens per watt etc. complete as reqd.

Digitally signed by AVDHESH

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supply & Laying of following sizes Aluminum conductor armoured PVC insulated PVC

42 MR sheathed XLPE cable of grade 1.1 KV in the existing open masonry duct/ surface/ cable tray/ pipe etc -

complete as reqd.

Supplying and making end termination with brass compression gland and aluminium lugs for

43 9.1 following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade

Supply & Laying of following sizes Copper conductor armoured PVC insulated PVC sheathed XLPE

44 MR cable of grade 1.1 KV in the existing open masonary duct/ surface/ cable tray/ pipe etc complete as

Supplying and making end termination with brass compression gland and Copper lugs for

45 MR following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV -

grade as required.

Hot Dipped Galvanized Iron Cable Tray -

Supplying and installing following size of perforated Hot dipped galvanized iron cable tray

(Galvanized thickness not less than 50 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including bolts & nuts, painting suspenders etc as required.

46.1 450 mm width X 50 mm depth X 2.0 mm thickness P/Mtr. 50 1,325 66,250

46.2 300 mm width X 50 mm depth X 1.6 mm thickness P/Mtr. 220 963 2,11,860

46.3 150 mm width X 50 mm depth X 1.6 mm thickness P/Mtr. 100 716 71,600

Main Floor Panel

Fabrication, supplying, installation, Testing & Commissioning of electrical panel of

cubical construction, of suitable size with 630 Amp TPN Aluminum Bus Bar insulated with heat

shrinkable PVC sleeve, floor mounted type, fabricated out of 2mm.thick CRCA sheet,

compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatment process, cable alley, inter-connection, having

following switchgears and accessories mounting and internal wiring, earth terminals,

numbering etc. Complete in all respect, suitable for operation on 415 V, 3phase, with neutral 50 HZ.

supply etc. complete as reqd.

INCOMER FEEDER-1 -

400 Amp 4P MCCB 35KA - 1No

Indicating Light - 6Nos Multifunction Meter with RS485 communication port-1No Control MCB-7Nos -

INCOMER FEEDER-2 -

400 Amp 4P MCCB 35KA -1Nos

Indicating Light - 6Nos Multifunction Meter with RS485 communication port-1No Control MCB-7Nos -

400 Amp. Bus Coupler - 1 No. -

OUTGOING FEEDER -

Digitally signed by AVDHESH

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

100A FP MCCB 25KA -12Nos -

UPS OUTPUT PANELS

Fabrication, supplying, installation, Testing & Commissioning of electrical panel of

cubical construction, of suitable size with 400 Amp TPN Aluminum Bus Bar insulated with heat

shrinkable PVC sleeve, floor mounted type, fabricated out of 2mm.thick CRCA sheet,

compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatment process, cable alley, inter-connection, having

following switchgears and accessories mounting and internal wiring, earth terminals,

numbering etc. Complete in all respect, suitable for operation on 415 V, 3phase, with neutral 50 HZ.

supply etc. complete as reqd.

48.0 INCOMER FEEDER-1 -

320 Amp 4P MCCB 35KA - 1 No

Indicating Light - 6Nos Multifunction Meter with RS485 communication port-1No Control MCB-7Nos -

INCOMER FEEDER-2 -

320 Amp 4P MCCB 35KA - 1 No

Indicating Light - 6Nos Multifunction Meter with RS485 communication port-1No Control MCB-7Nos -

320 Amp. Bus Coupler - 1 No. -

OUTGOING FEEDER -

100A FP MCCB 25KA -8Nos -

Fabrication, supplying, installtion, testing and commissioning of FMPDU panel suitable size with 200

amp TPN Aluminium Bus bar insulated with heat shrinkable PVC sleeve, floor mounted type, fabricated

out of 2mm thick CRCA sheet compartmentalised with hinged lockable doors, dust and vermin proof,

powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection,

having following switchgears and accessories mounting and internal wiring, earth terminals, numbering

etc. Complete in all respect, suitable for operation on 415 V, 50 HZs, Three phase AC supply etc.

complete as reqd.

49.0 Incomer:100A, 25kA, FP MCCB- 1 Nos Each 2 2,80,845 5,61,690

Multifunction meter with RS-485 PORT CL-1- 1 Nos

C.Ts 100/5Amp - 3 Nos

Aux. Contactor 2 NO+2NC,220 Volt - 1 Nos

R,Y,B Phase Indicator LED - 1 Set

32 A Neutral Link - 2 Nos

6A, 10kA, SP MCB - 4 Nos

Outgoing:32A, DP MCB - 9 Nos

SITC Power source transfer switch to provide power supply redundancy for single connection

equipment. With ATS, power from two independent sources can be supplied to IT equipment, which

have only one input power supply(for Seamless power transfer) having the following technical

specification: -

a. Nominal Current- 16 Amp.

b. Nominal voltage/input frequency 208/220/230/240 V ; 50/60 Hz

c. Typical transfer time-8 ms

d. Safety Certifications- IEC/EN 62310-1, IEC/EN 60950-1 IEC/EN, EMC IEC/EN 62310-2

e. Certification- CE

f. Inputs 2 IEC C20 + 2 input cables, Outputs 8 IEC C13 + 1 IEC C19

g. Rack Space required for installation- 1U

(Make- Eaton Model No.- ATS 16, Guarantee- 2 Years standard exchange of the product.)

Providing of rubber mat 1 mtr. wide and 12 mm thick to withstand 3.3 KV dielectric strength as

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least

2 mm thick, and vitreous enameled white on both sides, and with inscription in single red

colour on front

side as required.

Providing First Aid Box as approved by St. John

Ambulance Brigade/Indian Red Cross conforming to IS 2217 : 1963.

Digitally signed by AVDHESH

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick

glass as reqd. (approximate front area 1.20 sq. metre)

Supply, installation, testing and commissioning of horizontal storage type wall mounted hot

water geyser of following sizes & minimum capacity of 2 KW, 4 BEE star rating, suitable for

55.0 operation on 220 V, 50 Hz, Single phase AC power supply i/c S/F outgoing & incoming water -

connection pipe etc.

complete as reqd.

(SH-II: HVAC SYSTEM)

CHILLED WATER HVAC SYSTEM

Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return

air path as and where required of required sizes i/c control wiring, the damper shall be motorized

and spring return so as to close the damper in the event of power failure automatically and open

56 16.20 the same in case of power being restored. The spring return action shall be inbuilt mechanism and

not externally mounted. The damper shall also be closed in the event of fire signal complete as

required and as per

specifications.

Supply, installation, testing and commissioning of GI volume control duct damper complete

with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium

volume control dampers as per specifications.

Supplying, & fixing, of powder coated extruded aluminium section return air grills with louvers but

without volume control dampers, complete as per required.

Supply, installation, testing & commissioning of thermal insulated flexible duct of following

60 16.19 sizes duly supported at regular interval as per site requirement etc. complete as required -

as per specifications.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet

metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers,

vanes, hangers, supports etc. as per approved drawings

and specifications of following sheet thickness complete as required.

61.3 16.12.1.3 Thickness 1.00 mm sheet P/Sqm 50 1,381 69,050

Supplying, fixing, testing commissioning of supply air diffusers of powder coated aluminium with

62.0 16.17 aluminium volume control dampers with anti smudge ring & P/Sqm 10 12,184 1,21,840

removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium

62.0 16.18 without volume control dampers with anti smudge ring & P/Sq m 10 8,121 81,210

removable core.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed

cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile

62.0 16.23 rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber -

tape insulation

complete as per specifications and as required.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including

cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following

capacity with GSS casing and aluminium alloy impellers with high efficiency aero-foil sections,

blades, the impeller directly driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V

± 10 %, etc. complete as reqd.

64.1 7500 cfm at 15 mm static pressure for fresh air With Class "H" insulation. Each 4 1,51,725 6,06,900

64.2 7500 cfm at 15 mm static pressure for fresh air Each 4 1,47,823 5,91,292

With Class "F" insulation. -

64.3 Axial fan control panel Each 8 65,621 5,24,968

Digitally signed by AVDHESH

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supply, Installation, Testing and Commissioning of fire retardant flexible Canvas Connection

between Indoor Units and Ducts and Filters for Ducted Units etc. complete as reqd.

Supply, Installation, Testing and Commissioning of inline exhaust fan of 200CFM capacity in toilet

area etc. complete as reqd.

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically

sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules,

microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant,

67 1.0 vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated P/Hp 130 16,415 21,33,950

capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit

shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with

first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be

less than 3.1 and IEER not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan

section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX

Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC

supply, complete, as required. The unit shall have automatic force shut down provision in case of fire

on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions

of 27 Degree C DB and 19 Degree C WB temperature.

SITC of VRV/ VRF one-way 2.5TR Cassette type indoor ceiling mounted unit to match above

specifications.

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete

with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular

sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per

specifications etc. as required :

69.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation P/Mtr. 195 466 90,870

69.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation P/Mtr. 145 588 85,260

69.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation P/Mtr. 170 707 1,20,190

69.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation P/Mtr. 140 865 1,21,100

69.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation P/Mtr. 50 1,022 51,100

69.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation P/Mtr. 200 1,108 2,21,600

69.9 5.1 34.9 mm O.D (wall Thickness-1.2 mm) (Insulation: 19 mm) P/Mtr. 275 1,230 3,38,250

Supplying, Installation, Testing and Commissioning of following capacity wall mounted 5 star rating

inverter type split air conditioning unit complete with rotary compressor, air cooled condenser made of

copper, evaporator unit, R410A refrigerant gas, along with refrigerant piping and insulation upto 3

mtrs, i/c drain pipe up to 3 mtrs. length, cord less remote suitable for operation on 230 Volts, single

phase, 50 Hz. A. C supply i/c providing & fixing of powder coated M. S. bracket / stands for outdoor

unit complete etc as required.

70.1 2 TR capacity Each 8 85,890 6,87,120

Supplying and fixing of extra copper piping of size 5/8" and 1/4" from indoor unit to outdoor units

including vaccumiazation and Nitrogen testing, insulation of pipes with 19 mm thick Elastomeric Closed

71 Cell Nitrile Rubber i/c all standard accessories with necessary supporting arrangement of Each 80 1,890 1,51,200

hanging/adjustable ring type hanger, wall fixed type including jointing/brazing including accessories,

etc all complete as required.

Providing and fixing rigid 25mm UPVC piping complete with fittings, supports, adjustable hangers as

72 per specifications and duly insulated with 9 mm thick closed cell nitrile rubber insulation etc complete

72.1 25mm UPVC Pipe Each 220 290 63,800

72.2 32mm UPVC Pipe Each 150 290 43,500

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper in suitable conduits

between indoor and outdoor unit.

Digitally signed by AVDHESH

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

72.4 Timer for Split AC for Server Nos 4 3,810 15,240

(SH-III: FAS & PA )

Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop modules

and capable of supporting not less than 240 devices (including detectors) and minimum

120 detectors per loop and loop length up to 2 km, network communication

card, minimum 320 character graphics/ LCD display with touch screen or other keypad and

minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ±

5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic

charger. The panel shall have facility to connect printer to printout log and facility to have

seamless integration with analog/digital voice evacuation system (which is part of the schedule of

work under SH: PA System) and shall be complete with all accessories. The panel shall be

compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per

specifications.

73.1 17.2.1.2 Two Loop Control Panel Each 1 2,39,225 2,39,225

Supply, Installation, Testing and Commissioning of Fabricated 12U Floor mounted audio rack with

73.2 MR Lockable Toughened Glass Door, Powder coated, Castors(4nos), Fan(4 Nos), Full Tray Unit(5 Nos), Each 1 25,589 25,589

PDU 5/15 amp to accommodate all PA controller and amplifiers equipments complete as required.

Supplying, installation, testing & commissioning of repeater panel with 320 character/ Touch

74 17.2.3 screen LCD display with inbuilt reset, acknowledge and Each 1 1,08,688 1,08,688

silence switches complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photo

thermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with

rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all

etc. as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

77 17.2.5 Box having two LED, metallic cover complete with all Each 140 276 38,640

connections etc as required.

Supplying, installation, testing & commissioning of addressable manual call point

complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying, installation, testing & commissioning of addressable fire control module complete

81 17.2.7 Supplying, installation, testing & commissioning of fault isolator complete with base as required. Each 18 3,270 58,860

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper

conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

83 17.2.19 Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. Each 8 1,600 12,800

Supplying, installation, testing & commissioning of intelligent addressable duct detector

84 17.2.13 including suitable Photo detector complete with base as Each 4 7,814 31,256

Supplying, installation, testing & commissioning of addressable phone control module

complete as required.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete

Public Address System -

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3

87 17.3.1 player (including 6 zone button paging station) with seamless integration facility with main Each 1 1,26,411 1,26,411

fire alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of

1.5/3/6W recess mount ceiling/wall speakers complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 250 Watt, 25V rms

operating at 240 volt AC supply complete as required.

Digitally signed by AVDHESH

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

microphone assembly complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

91 17.5.3 existing surface / recessed steel conduit of following pairs, cores and size including

connections and interconnections etc. as required.

91.1 17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm Each 870 54 46,980

Total of SH-III:- 20,89,244 5,22,099

SH-IV: (CCTV SYSTEM)

Supply, Installation, Testing & Commissioning of 4MP IR IP H.265 Vandal Proof Dome camera Smart IR,

up to 30M IR distance, Up to 120 dB WDR (Wide Dynamic Range),3D DNR (Digital Noise

Reduction),H.265+, H.265, H.264, MJPEG, Corridor mode, Triple streams,3-Axis, IP67, IK10 Vandal

Resistant, Color: 0.005Lux (F1.4, AGC ON), 0 Lux with IR, Video Compression H.265+, H.265, H.264,

92.1 MJPEG, Behavior Detection Intrusion, Crossing line, Motion detection, Object left, Missing object, Each 30 23,729 7,11,870

Intelligent Identification Face detection, Defocus, Scene Change ,PoE (IEEE802.3 af) Power

consumption: Max 7.2W,Edge Storage Micro SD Card, Up to 256GB, ANR Support, Working

Environment -40°C ~ +60°C, Humidity ≤ 90% RH(Non- condensing),Compatible Integration ONVIF

(Profile S/G), API.

Supply, Installation, Testing and Commissioning of 32Ch Embedded Network Video Recorder with 4

Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Redundant power supply, Smart Each 1 98,000 98,000

Analytics and ONVIF

Supply, Installation, Testing and Commissioning of 16Ch Embedded Network Video Recorder with 4

93.0 Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Redundant power supply, Smart Each 1 53,729 53,729

Analytics and ONVIF

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category Only complete etc. as required. etc. all

Supply, installation, testing and commissioning of Video Management software enabling security

related personnel to easily and remotely gather video evidence, monitor live situations, and configure

and maintain a video surveillance system over Ethernet consisting of digital video recorders (DVRs),

hybrid digital video recorders, network video recorders (NVRs), analogue video cameras, and IP Each 1 24,996 24,996

video cameras should support Detachable Viewers –users have the ability to detach Viewer panels

and move them to other (or the same) monitor(s). A maximum of two (2) Viewers can be detached

for a total of 75-up video tiles [two (2) detached and one (1) core Viewer.

Supply, Installation, Testing & Commissioning of 42" Flat Screen HD led (24X7) with Interfaces include

HDMI, DVI, D-sub, Component and Composite input as well as RS-232C and RJ45 for extensive

connectivity, remote control and wall mount unit / floor stand complete with making connections etc.

complete as reqd.

96.0 Supply, Installation, Testing & CommissioningC of HDMI cables 10 meters M2M etc. all complete. Each 2 8,729 17,458

Supply, Installation ,Testing and Commissioning of 24U (600mm (W)/1000 mm (D)) floor mount

rack with 4 nos. unidirectional wheels, steel sheet enclosure with glassed front door,

perforated powder coated rear door side panels with top cover, 2x ventilations fans , cable

97.0 entry at cut outs and gland plates, 1 cable managers , stationary shelf , 2 nos vertical mounted Each 1 29,327 29,327

powers strip each with 3 Nos 6A power socket with 32 A SP MCB and indicator of ON and all

necessary hardware accessories complete etc. as with all necessary

accessories etc as reqd.

Supply, installation, testing and commissioning of 6 Core Single mode Optical Fiber Cable in water

block loose to taped corruagated steel tape armoured polythene outer sealed embedded wih

two steel wire on the periphery. The cables are with UV

Stabilized PE Jacket and protected from Rodent attacks i/c connection etc. complete as reqd.

Supply, installation, testing and commissioning of 12 Port wall/rack mounted LIU fully Loaded

99.0 complete with Adopter Pigtails and othr accessories etc. Each 2 33,403 66,806

Complete as reqd.

Supplying and fixing of following sizes of medium class PVC conduit along with

100.0 1.21 accessories in surface/recess including cutting the wall and

making good the same in case of recessed conduit as required

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/

PVC conduit as required.

Digitally signed by AVDHESH

Sr. No. DSR 2022 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

SH-V UPS SYSTEM

Supply, Installation, Testing and Commissioning of 120KVA Modular hot swappble True Online

double conversion VFI technology, High Frequency PWM using IGBT technology, Parallel

redundant, 3 phase AC Input & 3 phase 4 wire AC Output UPS. Input range should be 360 VAC-450

VAC, Frequency Range: 46~60 Hz, Current Distortion: Less than < 5% at full rated UPS output load ,

Dual input (separate input for rectifier and separate input for bypass). Output- Voltage Stability: ±

1%, Distortion:(100% rated load with crest factor 2.7:1), Less than 2% total harmonic

distortion(THD) for linear loads, <5%THDfor100% balanced non-linear loads as specified

by IEC/EN62040-3, Provisions for maintenance by pass switch module. Microprocessor based LCD

display & indication for various electrical parameters. LED indication with alarm for major fault.

Provisions for remote monitring indication with potential free contact etc. complete as reqd.

BATTERY BANK -

Supply, Installation, Testing and Commissioning of 12V Monoblock suitable size and nos of

sealed maintenance free batteries supporting for 120KVA UPS System with minimum IP20

protection (conforming to IEC60529) for providing 15 minutes back up time with each UPS at

full load with interconnecting leads, mounting racks/stands for stacking the batteries, along -

with Battery Circuit Breaker, Connection, Interconnections, and standard accessories etc.

Complete as reqd. 1 Set = One Complet UPS + One Battery Bank of 15

minutes backup.

Supply, Installation, Testing and Commissioning of Parallel Redundant Kit to control the two

separate 120KVA UPS work together as a unified system. The modules synchronies the output of

each UPS so it can flow into a shared output by balancing the load equally amongst both the

UPS. The kit allows the total load to be taken by Single UPS if the other UPS is out od

order/taken out for service for

maintenance etc. complete as reqd.

Supply, Installation, Testing and Commissioning of K-13 Isolation Transformer – Cubicle IP-20 With

Copper Winding with H Class Insulation including specification Input - 415V 3ph, 3W, Delta,

– 415, 3Ph, 4W, ZIG ZAG, Digital Meter to Monitor with RS485 Port Including Manual Soft Start,