Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹42,500
Closing Date
22 Feb 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engineering Wing of Health and Family Welfare Department
M M Tumbaramatti
Up-gradation of basic infrastructure facilities at CHC at Laxmeshwar in Laxmeshwar Tq., Gadag District. (pac-6)
EWHFWD/2023-24/BD/WORK_INDENT154
EWHFWD/2023-24/BD/WORK_INDENT154
Reserved
Buildings
Two Tender Document System(Two Cover)
EWHFWD Executive Engineer Office Dharwad
5 documents required · 5 mandatory
The Tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/Government Electrical Inspectorate and should have executed similar building electrical works totaling Rs. 1.28 Lakhs in any one financial year Note:Consent letter of the subcontractor should be uploaded
The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by competent authority and should have executed similar building water supply/sanitary engineering works totaling Rs. 3.58 Lakhs in any one financial year Note:Consent letter of the subcontractor should be uploaded.
Mandating Satisfactorily completed, at least one work of value not less than Rs. 10.62 Lakhs as a prime contractor
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e. (2018-2019 to 2022-2023) achieved in at least one financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs 42.47 lakhs
PWD Registration Certificate Class III & above
₹1,070
₹42,500
15 Feb 2024
15 Feb 2024
23 Feb 2024
17 Feb 2024
Up-gradation of basic infrastructure facilities at CHC at Laxmeshwar in Laxmeshwar Civil works
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer in charge.
Removing the glazed tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete including cost o...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 isto 5 (1 cement and 5 coarse sand) finished with a top layer 6 mm thick cement plas...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1 is to 3 (1 cement and 3 fine sand) to brick masonry including rounding...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 1 isto 4 (1 cement and4 fine sand) to brick masonry including rounding off corners wherever required smooth renderin...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing skirting , dadooin , rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1 isto 3 and jointed with white cement slurry over existing rough plaster surfac...
Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per Sqm width, along route of walls chipped for se...
Providing and fixing Aluminium fixtures like Aldrops of size 300 x 16 mm, Tower bolts of size 200 x 12 mm, Latches of size 250 x12 mm, 100 mm length oxidized Iron Hinges, Handles of size 150 mm, ...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...
Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 N...
Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top and bottom rails, covered with heat moulde...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggre...
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08 percentage and conforming to IS 15622, of app...
Finishing walls with 100 percentage Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004, Alkali and fungal resistance, dirt resistance exterior pain...
Finishing walls with textured exterior paint of required shade :New work
(Two coats applied @ 3.28 L/10 m²) over and including priming coat of
exterior primer applied @ 2.20kg/10 m² to give an eve...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...
Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, di...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1 is to 3 (1 cement and 3 coarse...
Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...
Providing and fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elast...
Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections or appropriate sections and other sections of approved make...
Branding for Hospital front including material and labour charges
Water supply and sanitation at Chc Laxmeshwar
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitti...
Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitti...
Providing and fixing brass bib cock of approved quality :
Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 25 mm Dia
Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 32 mm Dia
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets, cutting and making good the...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...
Providing and fixing mirror of superior glass (of approved quality) and
of required shape and size with plastic moulded frame of approved make
and shade with 6 mm thick hard board backing : Rectangu...
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber b...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all
fitting arrangements & all necessary accessories complete:For 10cms x 10cms
Constructing brick masonry inspection chamber 455x610mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non modular bricks of class designation 50 in cement mort...
Constructing brick masonry inspection chamber 500x700mm, and 450mm depth, ( clear inside dimension ) for pipeline with one or two inlets, using table moulded non modular bricks of class designation 5...
Providing and fixing PTMT grating of approved quality and colour. 100mm dia
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :20mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and...
Providing and fixing approved quality aquaguard water purifier, etc complete as per specification
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1 is to 6, bed concrete 150mm thick with 1 3 6, p...
Constructing brick masonry chamber of internal dimension 450X300mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1 is to 6, bed concrete 150mm thick with 1 3 6, p...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ...
Electric works at CHC Laxmeshwar
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit or casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Ea...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit or casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Ea...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit or casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Ea...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C.C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall ...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall ...
Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C.C w...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brickor Stone or C.C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brickor Stone or C.C...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing met...
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc., on existing modular switch plate IS 3854 and IS 1293 6Amps one way Switch.
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator o dimmer or telephone socket etc., on existing modular switch plate IS 3854 and IS 1293 6 Amps 3way socket.
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc., on existing modular switch plate IS 3854 and IS 1293 Stepped Fan Regulator.
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc on existing modular switch plate IS 3854 and IS 1293 16 Amps one way switch.
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc on existing modular switch plate IS 3854 and IS 1293 32 Amps DP switch.
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc on existing modular switch plate IS 3854 and IS 1293 6 OR 16Amps universal socket
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc on existing modular switch plate IS 3854 and IS 1293 RJ45 OR I.O OUTLET
Open Conduit System Supplying heavy gauge PVC conduit pipe 19 or 20mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood ...
Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R...
Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...
Supplying of LED light fighting 1 x4 20 or 22 w PVC Batten with integrated LED tube 20 or 22 W with high quality diffuser with Life of 25000 burning hours and 70 percentage lumen maintenance with C...
Supply of round or square recess or surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector has ...
Supplying and fixing of retrofit type LED bulb.7 W 6500K with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree k CRI greater than 70percentage. efficacy greater than 80 lumen per wa...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS 374 1979 and with double ball ...
Fixing all types and all capacities of fluorescent or false ceiling or spot light or CFL or LED fittings indoor on the wall or ceiling or rafters or girders using 23 0.0076 twin twisted PVC insulated ...
Fixing a ceiling or Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary...
Supplying and fixing regular MCB distribution boards on wall or wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCBs s...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON or OFF, energy cross to 3 with Short...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON or OFF, energy cross 3 with Short ...
Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board:32 40 Amps 4 pole
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying and running of GI or Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Laxmeshwar KW-2 I.No. 154.doc
Tender Document • 1.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .