GENERAL FUND 2025-2026

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, leveling, sectioning breaking clods etc., including all incidental charges etc., complete as per standard specification . for Foundations for Foundations SS 20B TNBP NO. 23 &24 V, VI (S2) VI 9

Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers (TNBP No.28).

Supplying & Erecting of steel centering for sides & soffiots including necessary supports using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c complying with standard specifications and as directed by the departmental officers. - Without Strutting TNBP NO.86 K, 86 A

Plain Cement Concrete 1:2:4 (one cement, two M Sand, Four aggregate) using 20mm gauge hand broken granite stone jelly including laying to the required thickness and finising the top smooth etc., complete

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 150mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, 111,112,406 &900 MORTH Specification

Providing and laying of Rubberized Paver block 83 mm thick High Strength type of interlocking pavement block in required size of minimum comperesive strength of 40 N/mm2 in Uniform Shape at approved make to be laid in curring bone pattern with approved non sticking surface in top and the rate including leveling the base preparation of subbase with the Stone Dust cushion 100 mm thick laying out the cut pieces to fit the edge vibrating the paver sweeping transporting loading , un loading and laying the Paver block etc Completed. as per Standard Specification.