CPPP

Technical Eval

Works

Electrical Works

Repair and Maintenance of various capacity of Servo Stabilizer, UPS, Ceiling fan, Air Conditioner, Geyser, Air Heater and various type of Motor installed at various establishment under STC BSF Kashmir.

DG,BSF,MHA

STC KASHMIR | Budgam, Jammu And Kashmir

Amount: ₹3.0 LCloses: 27 Aug 2026Closed

Timeline

Published17 Aug 2026
Closed27 Aug 2026
Technical Evaluation1 Sept 2026
Award—

Bids

2 Bids1 Sept 2026

#	Company	Status
1	M.L. ELECTRICAL AND MECHANICAL WORK Accepted-Technical	Accepted-Technical Found in order
2	M/S CRESCENT ENTERPRISES Accepted-Technical	Accepted-Technical Found in order

Tender Value

₹3.0 L

EMD Value

₹5,921

Closing Date

27 Aug 2026, 11:00 amClosed

Tender Inviting Organisation

Name

AC(ELECT) FTR HQ BSF KASHMIR

Address

FTR HQ BSF Kashmir

Work Description

As Per BOQ

Tender Information

Tender ID

2026_BSF_922460_1

Reference Number

3/AC(E)/STC/KMR/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Item Rate

Location

STC KASHMIR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As Per NIT

Documents Required

15 documents required · 15 mandatory

Fee/PreQual/Technical

RequiredScanned copy of physical deposition of original EMD with department. (.pdf)

RequiredCertificate of Registration of GST. (.pdf)

RequiredCopy of PAN Card (.pdf)

RequiredCopy of NIT duly seal and signed on each page by Contractor. (.pdf)

RequiredValid enlistment clearly mentioned validity, Class, Fin limit with sign and seal of issuing auth (.pdf)

RequiredValid electrical license issued by state PWD, MES, electricity Department, CEandG etc. (.pdf)

RequiredCopy of three similar works with schedule of work completion / experience certificate as per NIT (.pdf)

Requiredintegrity Pact-1 Performa-I (.pdf)

RequiredWarranty undertaking as per Performa-II. (.pdf)

RequiredUndertaking blacklisted/debarred by any Govt .or Non Govt. department Performa III (.pdf)

RequiredCopy of Average annual Turnover certificate duly attested by regd. charted accountant as per NIT (.pdf)

RequiredA bank solvency certificate from any nationalized / commercial bank As per NIT (.pdf)

RequiredContact details of the contractor in separate sheet as per NIT (.pdf)

RequiredBack-to-back basis as per Performa-VI. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹5,921

Important Dates

Last Activity

1 Sept 2026

Published

17 Aug 2026

Bid Opening

28 Aug 2026

Download Starts

17 Aug 2026

Download Ends

27 Aug 2026

Submission Starts

17 Aug 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (26 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Rewinding of stator winding of ceiling fan of 1200 mm / 1400 mm sweep with suitable size of super enameled copper wire including dismantling the old copper wire and vanishing greasing testing etc. as required (including less of scrap material, dismantle copper wire will not be taken back).	25	Nos	373	₹9,325
2	Replacement of fan condencer 2.5/3.15 MFD for above size of ceiling /exhaust fans as required (old condencer will not be retained by the contractor ).	25	Nos	587	₹14,675
3	Providing & fixing (Replacement) of suitable size of bearing 6201 / 6202 of make NBC / SKF for 1200 mm sweep ceiling fan including greasing including less the cost of old bearing etc. as required.	25	Nos	267	₹6,675
4	Providing & fixing of clip/clamp for capacitor including deduct of cost of old clip etc. as required.	25	Each	151	₹3,775
5	Rewinding of stator winding of up to 450 mm sweep size exhaust fans with suitable size enameled copper wire (as per manufactaraur specification) including sleevingof stator suitable insulation materials ie "E" class varnish complete with dismentling and reassambling after repair i/c connection testing etc as required(Burnt copper wire will be retained by the contractor).	3	Nos	121	₹363
6	Lowering and Lifting of various sizes submersible motor pump set from/to the borewell including all accessories etc as required.	2	Job	402	₹804
7	Providing & Fixing of Pump head cast Iron i/c rubber flage suitable for 0.5/1.0 HP monoblock pump etc as required. .	6	Job	47	₹282
8	Rewinding of 1.0 HP Monoblock / Submersible motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, varnishing,ball bearing,running capacitor, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months. (Including less of cost of old Scap material)	6	Nos	659	₹3,954
9	Rewinding of 3.0 HP Submersible/ Monoblock/ Openwell motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, Ball Bearing, varnishing, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months.(Including less of cost of old Scap material)	2	Job	1,144	₹2,288
10	Rewinding of 7.5 HP SuSubmersible/ Monoblock/ Openwell motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, varnishing,Bearing, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months. (Including less of cost of old Scap material)	1	Job	2,871	₹2,871

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.60 MB

Work Item Documents

BOQ_969369.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

M.L. ELECTRICAL AND MECHANICAL WORK

Accepted-Technical

M/S CRESCENT ENTERPRISES

Accepted-Technical

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Rewinding of stator winding of ceiling fan of 1200 mm / 1400 mm sweep with suitable size of super enameled copper wire including dismantling the old copper wire and vanishing greasing testing etc. as required (including less of scrap material, dismantle copper wire will not be taken back).

Nos

373

₹9,325

Replacement of fan condencer 2.5/3.15 MFD for above size of ceiling /exhaust fans as required (old condencer will not be retained by the contractor ).

Nos

587

₹14,675

Providing & fixing (Replacement) of suitable size of bearing 6201 / 6202 of make NBC / SKF for 1200 mm sweep ceiling fan including greasing including less the cost of old bearing etc. as required.

Nos

267

₹6,675

Providing & fixing of clip/clamp for capacitor including deduct of cost of old clip etc. as required.

Each

151

₹3,775

Rewinding of stator winding of up to 450 mm sweep size exhaust fans with suitable size enameled copper wire (as per manufactaraur specification) including sleevingof stator suitable insulation materials ie "E" class varnish complete with dismentling and reassambling after repair i/c connection testing etc as required(Burnt copper wire will be retained by the contractor).

Nos

121

₹363

Lowering and Lifting of various sizes submersible motor pump set from/to the borewell including all accessories etc as required.

Job

402

₹804

Providing & Fixing of Pump head cast Iron i/c rubber flage suitable for 0.5/1.0 HP monoblock pump etc as required. .

Job

₹282

Rewinding of 1.0 HP Monoblock / Submersible motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, varnishing,ball bearing,running capacitor, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months. (Including less of cost of old Scap material)

Nos

659

₹3,954

Rewinding of 3.0 HP Submersible/ Monoblock/ Openwell motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, Ball Bearing, varnishing, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months.(Including less of cost of old Scap material)

Job

1,144

₹2,288

Rewinding of 7.5 HP SuSubmersible/ Monoblock/ Openwell motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, varnishing,Bearing, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months. (Including less of cost of old Scap material)

Job

2,871

₹2,871