SPECIAL REPAIRS/REPLACEMENT OF BLDG NO T-28 AT MH BABINA UNDER GE BABINA

Amount

Dismantling of Asbestos cement ( corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zink coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw complete all as specified and as directed.

Dismantling timber scantling vertical fencing posts unframed work 40 sq. cm and over in section in any position complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed.

M&L for two coat of synthetic enamel paint over redoxide primer on new steel Surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation boards/slabs/blankets), any thickness. Including cover fillets complete all as specified and as directed.

M&L for aluminium anodised snap grid frame work of the following (a) Main Tee section 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) (b) Section alongwith wall angle of size 40x25x2mm size (wt not less than 0.36Kg/RM) (c) Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) (d) Snap grid shall be fixed to ceiling by supporting hangers consisting of 6mm dia mild steel rod J bolts nuts and washer etc as per manufacture instructions & complete all as specified and as directed.

Materials & labour for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm as in ceiling complete all as specified and directed with and including aluminium anodised snap grid frame complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exe 1.5 sqm n.exe 4 sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) n. exe 1.5 sqm each complete all as specified and as directed.

S&F powder coated aluminium window fabricated out of aluminium section 1.60mm thick (double shutter double leaf ) side hung type with stainless steel but hinge, one shutter glazed with and including 4mm thick 5mm thick sheet glass tinted and other shutter with stainless steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire stapples rubber gasket, stopper, powder coated aluminium grills of aperture size of grill 50mmx 50 mm, (All fitting powder coated) ,aluminium anodised handle 100mm long, aluminium anodised tower bolts 100mm long and peg stay etc complete and size of aluminium frame 125mm x 40mm x 1.55mm and shutter frame size 40mm x30mm x 1.55mm complete all as specified and as directed.

S&F powder coated aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83mmx44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 5mm thick plain colour PVC sheet and 5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, powder coated aluminium anodised snap beading, screws, powder coated aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed.

S&F powder coated aluminium frame straight for doors using aluminium section of minimum size 100mmx44mmx1.60mm thick fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed.

S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed.

S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and as directed.

S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed.

S&F mild steel, 300 mm ordinary door spring including roller and roller plate etc complete all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed.

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and as directed.

S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed.

M & L Vitrified ceramic tile 10mm thick ( square/rectangular) polished, area of each tiles 600 X 600mm floors etc. set and jointed in neat cement slurry and pointed in wite or coloured cement to match using cement mortar 20mm thick screed bed complete all as specified and as directed.

Vitrified ceramic tiles size 600x600x9-10mm thick, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 10 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed.

Taking down cement mortar on brick or stone walls, etc.including raking out joints hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L glazed ceramic colour tiles 450mmx350mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:4, complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15 mm thick in CM(1:6) etc complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed.

M & L Rendering 15mm thick on fair faces of brick using CM( 1:6) for External wall surfaces complete all as specified and as directed.

M & L for preparation of new plastered surface and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface etc complete all as specified and as directed.

M & L Rendering 15mm thick on other than fair faces of brick using CM( 1:6) for internal wall surfaces complete all as specified and as directed.

Preparation of new surfaces one coat of primer on plastered surface and also use, white putty and two coat of OBD on Internal wall surface complete all as specified and as directed.

Complete removal of existing treatment on wall using one coat of primer and white putty two coat of OBD on wall surfaces complete all as specified and as directed.

Complete removal of existing treatment on wall using one coat of primer and white putty two coat of cement base paint on wall surfaces complete all as specified and as directed.

S & F in repair Vitreous china wash hand basin coloured, Table top type including cutting for or pinning complete including 32 mm CP brass waste fitting 32 mm PVC waste pipe, cast iron brackets and PCC 1:2:4 type B-1 using graded stone aggregate for embedding brackets and making good disturbed surface CM 1:3 complete all as specified and directed.

S & F in repair Brass chromiun plated towel rail 600 mm long comprising tubular rail fixed complete with brass chromium plated screw complete all as specified and as directed.

S & F in repair Bib tap cast copper alloy chromium plated, fancy type, with capstain head handle screwed down screwed for iron pipe and fixed fo 15mm bore pipe fixed as in repairs ccomplete all as specified and as directed.

S&F in repair brass chromium plated shower rose 75mm size with long body fancy type including fixing to steel pipe or union complete all as specified and as directed.

S & F in repair Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore complete all as specified and as directed.

S&F in repair CP soap dish 150x150 mm size heavy duty fixed to wall with brass chromium plated screws complete all as specified and as directed.

S & F in repair 450 mm long PVC connection with brass check nuts for 15mm bore pipes of aproved quality complete all as specified and as directed.

S&F in repair brass WHB CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed complete all as specified and as directed.

Supply only 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed

. S&F in repair 32 mm dia PVC waste pipe complete all as specified and as directed.

Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level) complete all as specified and as directed.

M&L for 75mm thick cement concrete type C-1, 1:3:6 (40mm graded aggregate) as in plinth protection /path finished even and smooth without using extra cement complete all as specified and directed.

Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed.

Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed.

Supply and fixing, jointing and testing 15mm dia bore galvanised iron tube medium grade with all new fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

Supply and fixing, jointing and testing 20mm dia bore galvanised iron tube medium grade with all new fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

Dismantling of existing water tanks of steel /PVC/RCC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and as directed.

S & F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe ) including connection todrain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated jet spray for EWC complete all as specified and as directed.

S&F in repair CP corner glass shelf with bracket fixed with screws complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

M&L for 75mm thick plain cement concrete type B-2, 1:4:8 (40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with gray cement and pigments over screed bad or bedding layer of mortar 20mm thick in cement mortar (1:6) for laying of floor finish complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately ) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc all as specified and directed.

Taking down fan and Exhaust fan sealing cable end, dismantling blades and removing fan and deposting to MES storeyard complete all as specified and as directed.

M & L for concealed point wiring complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed for the following :-

One light point controlled by one switch complete all as specified and as directed.

One fan point controlled by one switch & regulator complete all as specified and as directed.

One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board complete all as specified and as directed.

One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board complete all as specified and as directed.

One bell/buzzer point controlled by one switch complete all as specified and as directed.

Description all as per item No 72 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S&F switch bell push button type 5 Amp single pole complete all as specified and as directed.

S & F delux Fan Regulator electronic rotary, doble module, step type 240 Volt 50 Hz, complete all as specified as directed.

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S&F Bell,DING DONG AC 230Volts,single pole type complete all as specified and as directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as specified and as directed.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 6.0 sq mm (Nominal area) multi stranded drawn into new conduit with and including 2.5 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured separately.

M&L for Sheet metal enclosure TPN DBs -DPx -3 ,100 MCCB as incomer SP/TP as out going for DX-3/Lexic MCB till 63 A as out going ,04 Way with safe shroud for Netural links,Compact Busbarassembly, Protect plus for busbars Cat part No 6076 95 , 6 way DPX3 160+18 with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note:- MCBs will be measured separately.) Make:- Legrand Cat Pt No 607695 or equivalent in Hager/Merlin Gerin multi-9

S&F MCCB 80 Amps,415 volts,3 phase,50HZ, having 10 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed. (over load release :Adjustable Thermal release (.7 to 1.0 In ) and Fixed magnetic type Suitable for 10.0 In )

S&F MCB single pole 63 Amps 240 V,10KA, 'C' series,complete all as specified and as directed with copper lugs

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 8 ways 240 V complete all as specified and as directed .

S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, complete all as specified and as directed with copper lugs

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series,complete all as specified and as directed with copper lugs

Supply and fixing in repair 20 W LED 5700k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 20 watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and as directed.

S&F 12 W LED Bulb and aluminium heat sink complete all as specified as directed. Make Havells Cat No LHLDEREEMD8X015 or equivalent of Havells/Bajaj

S&F 12 W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make equivalent of Havells/Bajaj

S&F in repair 12 W LED 6000K decorative Wall light lighting fixture with extruded polycarbonate, environmently friendly, energy efficient and 12W LED lamp fitted including wiring upto and terminating into ceiling rose complete all as specified and directed. Make:- Shakti s cat Part No. SZSLAMX03 ( athena 2 (prismatic) or equivalent in Philips

Supply and fixing light fitting Energy saving new generation 10W LED IP65 bulkhead luminaire with opal diffuser. including connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and as directed. Make Shakti Cat No. SZSLMMX012 12W, C&S, Philips or equivalent make.

S&F LED security/ street light fitting 1 X30 W LED 5700K energy saving & environmental freindly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 65 protection and impact resistance of IK 07 luminaire with high power LEDs as light source and electronic driver suitable for pole dia 40 mm including 45 mm dia light grade tube bracket, bend to shape 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed. Make: – Havells Cat No ENDURACITYLITEPLTPLUSSL30WLED757SASYBOPC OR equivalent of Philips/Bajaj.

S&F ceiling fan 1200 mm sweep BEE 5 star rating complete AC single phase 230 volts.including all fixing arrangement like hook, regulator,pipe of suitable size complete all as specified and as directed.

Supply and Fixing Exhaust fans AC single phase 230/240V of size 380 mm sweep, 1400 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size complete all as specified and as directed.

S&F storage type water heater (Geyser), 230 Volt AC, 25 Ltrs capacity comprising copper inner tank,suitable heatng element, thermostate with adjustable temperature setting 0-90 C, indication lamps provision for inlet outlet and air vent connections & NRV, including all fixing arrangement such s faster bolts, nuts washers etc complete including making good disturbed wall surfaces matching with the existing surfaces and finishing complete all as specified and as directed.

S&F stop valves, cast copper alloy, srewed down , high pressure, with cruntch or butter fly handle, screwed both ends for iron pipe or for unions and fixed of size 15 mm dia complete all as specified and as directed.

S&F Bib taps, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe and fixed of size 15 mm dia complete all as specified and as directed.

S&F PVC connection 15 mm size, heavy duty with brass nuts, 450 mm long complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 X 4 sq. mm complete all as specified and as directed.

Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/cables etc and getting out incl forming bottom surface to the required level/slope etc complete all as specified and directed .

Returning fitting in soft/loose soil, including spreading levelling watering and well ramming in layers n.exc 25 cm complete all as directed.

Removing excavated soils to a distance n.exc. 50 mtrs and depsiting where directed at a level n.exc. 1.5 above the starting point complee all as specified and directed.

supply laying dry clean sand free from sharp materials, unscreened filling in trenches around under ground cables for cushioning complete all as specified and directed.

M&L for brick protection covers over cables of Class LV, type 1 flat size 250mm x150 mm x40 mm , laid dry over cables (length of cable cover shall be laid across the length of the cable complete all as specified and directed

M&L 50 mm dia pipe galvanised iron, light grade ISI marked, complete with fittings laid inj trenches/ fixed with poles etc as protection to cables complete as ditrected.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weight not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/s Ravi Traders

DEVENDRA ENTERPRISES

M/s JS Constructions

M/S M S Constructions