Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.1 LAccepted-Finance SADHANPUR NARAYAN DIGHI BURDWAN PIN 713101 | KATWA | PURBA BARDHAMAN | WEST BENGAL | 713101 | L1 | Accepted-Finance Quoting Lowest rate | |
| 2 | L2₹9.2 L+₹13,011 (1.43%)Rejected-Finance 14 B B SEN ROAD P O BERHAMPORE MURSHIDABAD WEST BENGAL 742101 | BERHAMPORE | MURSHIDABAD | WEST BENGAL | 742101 | L2 | Rejected-Finance Quoting Higher rate | |
| 3 | L3₹9.3 L+₹17,182 (1.89%)Rejected-Finance 159B M G ROAD HARIDEVPUR KOLKATA WEST BENGAL 700082 UDYAM WB 10 0018308 | KOLKATA | WEST BENGAL | 700082 | L3 | Rejected-Finance Quoting Higher rate |
Tender Value
Refer Docs
EMD Value
₹19,000
Closing Date
3 Aug 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer
Office of the Superintending Engineer, Western Electrical Circle , PWD, Purta Bhavan, 1st floor, Burdwan-713103
Emergency nature Electrical Installation work at different buildings as and when required in FY 2023-24 in the campus of Bardhaman Medical College Purba Bardhaman. one year.
2023_WBPWD_549067_1
WBPWD/SEWEC /BED /NIQ-22/2023-24-2nd call
Open Tender
ELECTRICAL WORKS ORG
Item Rate
7 days
Bardhaman
Please refer Tender documents.
5 documents required · 5 mandatory
₹19,000
Office of the Superintending Engineer, Western Ele
17 Aug 2025
19 Jul 2023
5 Aug 2023
19 Jul 2023
3 Aug 2023
21 Jul 2023
19 Jul 2023 - 20 Jul 2023
20 Jul 2023
Amount
Dismantelling the existing electrical installation as per requirement of BMCH Authority by Co's own tools, tackles & manpower maintaining normalcy as far as possible and depositing the dismantalled damage materials to the Sectional Sorte of P.W.D and mending good the damages upto the satisfaction of the Authority/PWD, [NS]
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment., [D-9/13]
2 +8 Way [Make Legrand, Siemens, Crabtree, Schneider], [D-9/13]
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.[Make Legrand, Siemens, Crabtree, Schneider], [D-6/7]
Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.[Make Legrand, Siemens, Crabtree, Schneider], [D-5/6]
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit 'FR' (Brand approved by EIC) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed], [E-16/6]
a) Average run 8 Mtr, [E-16/6]
b) Average run 10 Mtr, [E-16/6]
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish, [E-15/4]
a) On Board , [E-15/4]
Supply & Fixing 240 V, 16/20A, plug socket with separate 16/20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required., [E-6/22]
Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 175x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover, incl. S & F 3 nos copper bar( Ph, N, E) and making necessary connections as required. , [E-3/10,E-4/12]
Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required, [E-7/26]
Supply & Fixing 240 V, 20 A Piano key type socket (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required, [E-6/17-(b)]
Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc., [E-19/17]
Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections., [E-17/5-(b)]
Supply and Delivery of 240V 50 Hz 48" sweep (1200 mm),High speed 380 rpm, Air delivery 230 m³/min , power input 55 W, ceiling fan complete with down rod,Canopy,fork etc. and Fixing the ceiling fan complete with blades, canopy, fork, rubber bush etc.With minimum 05 years warrenty from final billing period (Make- Orient Summer Breeze Pro or equivalent make/ model of Usha/ Crompton), [NS]
Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating., [D-3/4-a]
Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good amages to building works, []
25 mm dia 3 mm thick polythene pipe without earth continuity wire, [E-2/ 4 (a )]
Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works, [E-16/7]
a) 20 mm size, [E-16/7]
b) 25 mm size, [E-16/7]
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. Make RR Kabel, Polycab, Havells, [E-9/1]
a) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC (From HTPN DB to SPN DB) , [E-9/1]
b) 2X 56/0.3( 4 sqmm) + 1 X 36/0.3( 2.5 sqmm) as ECC ( From HTPN DB to AC ), [E-9/1]
b) 2X36/0.3(2.5 SQMM)+1*22/0.3(1.5SQMM) as ECC (For Power Plug & Computer Point), [E-9/1]
c) 3 X 22/0.3( 1.5 sqmm) , [E-9/1]
Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes., [F-5/9]
6 sq.mm., [F-5/9]
4 sq.mm., [F-5/9]
2.5 sq.mm., [F-5/9]
1.5 sqmm, [F-5/9]
Engraving the deptt. number with 10 mm lettering on the body of fan /T/L / Ex Fan/BH upto 10 letters incl. hifen, stroke or stop, [C-3/24-(a)]
Extra for additional one letter incl. hifen, stroke and stop, [C-3/24-(b)]
Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint, [H-2/7B]
1st coat of aluminium paint over one coat of RO priming, [H-2/7B]
2nd coat of aluminium paint over 1st coat, [H-2/7B]
Painting Block Letters or Digits within a circle/square as required, with ”Black Japan” paint of approved make & brand, the size of letters and digits as given below, [H-2/6]
Size 40 mm and upto 50 mm, [H-2/6]
Size 50 mm and upto 75 mm, [H-2/6]
S & F AC Street light timer DB (Water proof) concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter Connection with suitable size of copper wire and nutral link & provision for earthing attachment and febricated with following items as per instruction of EIC i) 240 V, 6-32 A SPMCB of breaking capacity 10 KA & 'c" Characteristic --01 no, ii) 240 V, 6-32 A DP MCB Isolator on din rail--01 no. iii) 240 V, 2P, Power Contactor ( rating above 20 amp) with accessories---01 no iv) Astronomical/ Digital timer switch---01 no. v) Toggle switch for manual/ auto operation---01 no. vi) Double door 2+8 Way SPNDB----1 No vii) Necessary connection by copper wire. vii) Necessary connection by copper wire. [ Make:- Siemens, Legrand, L &T] , [[N.S.]]
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as By ISI-Medium GI pipe, [G-1/2-(a)]
Excavation of soil for installation of Earth Electrode and filling & ramming., [G-1/1-(a)]
For Soft Soil, [G-1/1-(a)]
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe, [G-2/3-(a)]
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required, [G-2/4-(a)]
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages 8 SWG, [G-2/5-(a)]
Supply & Delivery 1.1 KV grade LT Aluminium PVC/XLPE Armoured cable ( Make:- Havell's /Polycab/RR Kabel) as per direction of EIC. The cable shall conform to IS 7098/Part I with anti terminate and anti rodent features., [NS]
4 core 6 sqmm, [NS]
4/ 3.5 core 16 sqmm, [NS]
4/ 3.5 core 35 sqmm, [NS]
4/ 3.5 core 70 sqmm, [NS]
4/ 3.5 core 95sqmm, [NS]
4/ 3.5 core 120 sqmm, [NS]
4/ 3.5 core 185 sqmm, [NS]
4/ 3.5 core 300 sqmm, [NS]
4/ 3.5 core 400 sqmm, [NS]
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed, [F-2/1(a)]
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting, [F-1/2(b)]
Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting, [F-1/2(c)]
Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting, [F-1/2(d)]
Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting, [F-1/2(e)]
Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting, [F-1/2(f)]
Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed, [F-2/1(b)]
S& D ferrul, for Straigh through Jointing of cable of different size (Brand approved by EIC), [F-6/10]
i) 3½ / 4 core 25-35 sqmm cable, [F-6/10]
iI) 3½ / 4 core 70 sqmm cable, [F-6/10]
iii) 3½ / 4 core 95 sqmm cable, [F-6/10]
iv) 3½ / 4 core 120-150 sqmm cable, [F-6/10]
v) 3½ / 4 core 185 sqmm cable, [F-6/10]
vi) 3½ / 4 core 300 sqmm cable, [F-6/10]
vii) 3½ / 4 core 400 sqmm cable, [F-6/10]
Supply and Delivery compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :, [NS]
(i)4 core 16 sqmm, [NS]
(ii)4 core 35sqmm, [NS]
(iii) 4 core 70 sqmm, [NS]
(iv) 4 core 95 sqmm, [NS]
(v) 4 core 120sqmm, [NS]
(vi) 4 core 185 sqmm, [NS]
(vii) 4 core 300 sqmm, [NS]
(viii) 4 core 400 sqmm, [NS]
ix) 4 core 6 sqmm, [NS]
supply and delivery solderless socket (Dowels make) for Finishing the end of following XLPE/PVC armoured cables , [NS]
(i)4 core 16 sqmm, [NS]
(ii)4 core 35sqmm, [NS]
(iii) 4 core 70 sqmm, [NS]
(iv) 4 core 95 sqmm, [NS]
(v) 4 core 120sqmm, [NS]
(vi) 4 core 185 sqmm, [NS]
(vii) 4 core 300 sqmm, [NS]
(viii) 4 core 400 sqmm, [NS]
ix) 4 core 6 sqmm, [NS]
Dismantelling of cable ( both HT & LT both) from exising position from underground trench (after necessary dismantelling from termination & gland socket) and keeping the same at sectional store/at safe place at good condition at cable drum of following sizes as mentioned below:-, [Civil]
3.5 core above 35 sqmm and upto to 185 sqmm, []
Above 185 sqmm upto 400 sqmm, []
Dismantelling all types of plain cement concrete worksbituminous top layer works of road, stacking serviceable material at site & removing rubbish as directed by EIC with in a lead of 75 Mtr. (upto 150 mm/6" thick) (PWD Building Schedule) (6" depth X 2' width) Road cutting, [Civil]
Excavation of soil including filling the space of trench with shifted soil, leveling up and restoring surface dully rammed (PWD Building Schedule)( Road cutting below top surface) (1' depth x 2' width), [Civil]
Ordinary cement concrete (mix 1:2 :4) with graded stone chips ( 20 mm size) excluding shuttering & reinforcement, if any in ground floor as per relevant IS code (Pakur Variety) (PWD Building Schedule), [Civil]
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required, [F-6/11]
a. 65 mm dia, []
b. 50 mm dia, []
Supply & Delivery of Diesel oil for DG set through out the year as per requirement, [[N.S.]]
Charges for Transportation & Pouring of Diesel Oil for DG Sets with in the Campus of BMCH by company own vehicle and fuel pump and labour as per direction of P.W.D, [[N.S.]]
Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one 3 terminal stud as per direction of EIC., []
DAS TRADING CO
MONDAL ENTERPRISE
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .