GEK-49/2021-22

Amount

Schedule 'A' Section - I

Demolition of cement concrte (un- reinforced) in ground floor and paving n. exc 15 cm thick bleow or above hround level complete all as specified.

Demolition of brick work or stone boulder masonry built in cement mortar complete all as spd and as directed.

Dismantling of RCC shelf other than ground floors and similar suspended works complete all as specified.

Taking down cement plaster of any description on brick wall surfaces etc including raking out joints hacking for key , scrubbing down down with water etc complete all as specified and directed by Engr-in-Charge .

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick built in CM 1:4 with sub class 'B' bricks of class designation 10 (minimum compressive strength of brick 100 kg/Sqcm) complete all as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick on stone masonry surfaces or surfaces other than fair face of brick work in CM 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick CM 1:4 on fair face of brick over concrete surface finished even and smooth witout using extra cement complete all as specified and directed by Engr-in-Charge. (WPC Shall be measured separately).

M&L Non Skid ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:6) complete all as spd & as directed.

M&L 1st quality, glazed ceramic coloured tiles 350x250x 7mm/450x350x 7mm thick on verticle surface of walls with neat cement slurry @ 3.00 Kg / Sqm incl pointed in white cement with pigment to match the shade of tiles, over and incl scrceed bed 10mm thick 1:4 all on spd .

M&L for black polished granite self or on cooking platform 20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick cement screed bed in CM(1:6) complete all as specified and directed by Engr-in-Charge. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/ edges incl holes for pipe all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd.

M & L RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in shelves / slabs and like with and incl use and waste of necessary form work complete all as specified.

M & L MS TMT Bars 10mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M & L MS TMT Bars 8 mm dia cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Cement concrete type B1 (1:2:4) using 20mm grades stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as spd.

Taking down chawkhat or frame with (without taking of shutters from the frames) exc 1.50 sqm but n. exc 4sqm complete all as spd.

All as per serial item No 17.00 but n.exc 1.5 sqm complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing to or from store as required complete all as specified.

M & L Pressed steel frames for doors of size 125 x 60 mm with one or more rebated incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame for making arrangement for fixing of door spring etc. complete all as specified.

M & L Pressed steel frames for doors of size 105 x 60 mm with one or more rebated incl necessary fixing lugs, hinges, lock, strike plates etc. complete all as specified.

S& fixed factory made plain framed paneled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure teated complete all as spfd.

S& fixed 2nd class hard wood 30mm thick made glazed and skeleton shutters factory made open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as spfd .

M&L factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail . paneling of plain colour PVC sheets to be filted in MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as spd.

Suppling & fixing in opening solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheets re-inforced with MS square tube complete all as spd.

S&F 25mm flush shutters, solid core construction, with block board core and plywood face panells, commercial types on both sides incl teak wood beading alround the shutters as directed by Engr-in-Charge and all as specified.

M & L block board Grade 1 quality exterior grade, decorative type with decorative face veneer type on one face, including fixed in repairs 19mm thick, fixed with screws to timber frame incl wooden bracket as in cupboard shelves complete all as specified.

S & fixing factory made steel windows with side hung shutters including box type hinges with steel handle, tower bolt and steel peg stay complete with glazing bars all as specified.

-do- but without glazing bars -do-

-do- but steel window or ventilator, fixed type, with glazing bars -do-

S&F mild steel framed work as in grills,guard bars etc. with ends of bars shouldered/welded and/or riveted and other simillar works confirming to Fe410-0 or Fe310-0 complete all as spfd.

S & Fixed galvanized mild steel wire cloth 0.56mm fixed nominal dai of wire and avrg widh of aperature 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as spd.

S&F 3mm thick Sheet glass, ordinaly quality and glazing with oil putty or secured with wdn beads as required in square n exc 0.5 sqm in each pane

S&F 4mm thick figured glass, pin head type quality and glazing with oil putty or secured with wdn beads as required in square n exc 0.5 sqm in each pane

M&L 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, laid in 1:20 slope as in plinth protection, coping, surface finished even and smooth without using extra cement, with and incl use and waste of necessary form work complete all as spd.

S & F Mild steel butt hinges medium weight , clod rolled, 100mm, ISI marked, complete all as spd .

S & F Mild steel butt hinges medium weight , clod rolled, 50mm, ISI marked, complete all as spd .

S&F 2nd class hard wood hollock small fittings such as brackets of any type, latch and hinge blocks, door stops and window stops, the like incl all necessary labours articles n. exc 200 cucm each complete all as spfd.

M&L barrel tower bolts aluminium anodised exlruded section of size 150 mm complete all as spd .

S&F 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as spd .

S&F aluminium fabricated type extruded handles of size 125 mm complete all as spd .

S&F 100mm size Hasp and staple MS wire type, stove enamelled black, incl bolt to hinge plate complete all as specified.

S&F in repair of 300mm mild steel ordinary rate tail rod pattern door spring incl roller and roller plate complete all as spfd.

S&F in repair 20mm dia mild steel chromium plated curtain rails fixed with brackets, stops, rollers, etc. complete all as specified.

Taking up or down 15 mm dia steel tubing incl connection and removal from site complete all as specified and directed by Engr-in-Charge.

All as per serial item No 45.00 - Ditto- but 20mm dia

S & F GI tubing medium gde with all fittings fixed to walls or laid in floors 15mm bore complete all as specified.

S & F GI tubing medium gde with all fittings fixed to walls or laid in floors 20mm bore complete all as specified.

S & F in repair 15mm bib tap cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S & F in repair stop valve/Angle cock fancy type cast copper alloy 15mm bore screwed down high pressure chromium plated concealed type complete all as spd.

S & F in repair stop valve cast copper alloy 20mm bore screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unioin fixed complete all as spd.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks exc 500 n. exc 1000 ltr capacity complete all as specified.

S & F 1000 ltr capacity rotational moulded polythene water storage tanks (clyndrical vertical with closed top) hoisted and fixed in position all as spd in SSR Part I.

S & F 20mm bore dia ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipes etc, complete all as specified.

S & F in repairs sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to draft wall including brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S & F viterious china squatting span ORISSA Pattern size 580x440mm with integral foot rests, (excl flushing cistern and flush pipe) but with and incl connection to trap, and to flushing pipe anti-syphonage pipe, etc. complete incl provn of lime concrete and making good to floor, in repair complete all as specified and directed.

S&F 10 Ltrs capacity virgin polypropylene cistern, syphonic action type, ISI marked, white at low level complete with PVC bends, flush pipe and making all connections with and incl inlets ball valve float, handle, brackets and making good the disturbed sufaces in CM 1:3 to match with the existing surface, in repair complete all as specified.

S&F Vitreous china wash hand basin white flat back or angle back type size 600mm x 480 mm white incl C P pillar taps 15mm bore waste chain & plug , waste pipe and prop stopper but incl cutting for and pinning in ends of brackets or erecting stand fixed, in repair complete all as specified.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, bracket guard and railing 60cm long incl screws, in repair complete all as specified.

S & F in repairs soap dish chromium plated of size 180x160x90mm any type, fixed complete all as spd.o plugs with chromium plated brass screws all as specified.

S & F in repairs brass chromium plated tabular towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified

PCC (1:3:6) type C2 using 40mm graded stone agg as in surface channel / drains complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds/stopped ends etc complete all as specified and directed by Engr-in-Charge.

Mild Steel works as in bends straps, hold fasts etc, conforming to IS-206202006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified.

Providing cement concrete C 1 (1:3:6) using 20mm grded stone aggregate as in filling of chowkats incl weathering, slightly rounded or chamfered angles and throating as directed incl necessary form work complet all as spd.

Dismantling of Cast Iron pipe 75mm to 100mm dia complete all as specified.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required complete all as specified.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required complete all as specified.

S&F 110mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified.

S&F 110mm dia PVC (SWR) reducer, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.

S&F 75mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.

S&F 110mm dia PVC (SWR) "P" trap single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.

M&L preparation of new or previourly untreated surface of wood or board materials of any description not otherwise described over 10cm in or girth & appyling two coats of synthetic enamal paint over a coat of pink primer complete all as spd .

M&L preparation of old wooden surface of any descreption not otherwise described over 10 cm widtn or gith & appling two coats of sytnetic paint complete all as spd .

M&L Preparation of new steel surfaces including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl cornices, chajjas, sun shades etc. and applying one coat of cement base paint (1st quality) with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) including complete removal of existing surface with sand paper or iron patti / flat complete all as specified.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying two coat of white wash complete all as specified.

M&L for preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified and directed

M&L for preparation of Newly plastered surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint (1st quality) with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) over one coat of primer complete all as specified and directed by Engr-in-Charge.

S & F expanded metal of weight n.exc 4.00 Kgs per Sqm cut to length, bent to shape reqd and tying with and incl annealed mild steel wire not less than 0.9 mm dia (or) fixing with galavanised steel staples (or) welded to steel members etc omplete all as specified & as directed.

Dismantling plain or corrugated steel sheeting any guage thickness incl Nainital pattern as in roof covering complete all as specified.

S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc. with grade of zinc coating 275 complete all as specified & as directed.

S & F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified & as directed.

M & L as in repair for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate , as in filling of mass concrete for sub base floors complete all as specified.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed or bedding with CM 1:6 ,etc complete all as spd. Note:- (i) The rate of kota stone shall be deemed to incl for full rounded off corner/ edges incl holes for pipe all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and kota polishing to achive the desired granite finish all as spfd.

Dismantling timber scantlings 40 sq. cm and over in section, in any position (Unframed work) complete all as specified.

S & F as in repair second class hard-wood, timber fixed and clean sawn, in scantlings complete all as specified.

All as per serial item no 90.00 here-in-before ditto but except timber.

Supply only water proofing compouond all as specified as per manafature instruction complete all as specified and directed by Engr-in-Charge.

M & L Precast cement concrete tiles polish finish in grade M-50 compressive strength 688 Kg/Sqcm as per IS-1237-1980 coloured i.e tera cota, Misty beige, smoke grey and design piazza size of tiles 360x270mm or crossword size 300x300mm and thickness of tiles 22mm+/-2mm over and including 15 mm thick screed bed in cement mortar 1:6 and jointed in cement slurry @ 3 Kg / sq metre and pointed in white or coloured cement to match the shade of tiles complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified.

Dismantling timber scantlings in any position in fillets, rails, posts, rafters , purlins, etc. under 40 sq. cm in section (Unframed work) complete all as specified .

M & L as in repair for plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 13 sq.cm and not exc 25 sq.cm complete all as specified.

Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard and dese soil complete all as specified and directed by Engr-in-Charge.

Removing excavated material exc. 50m and depositing where directed at level n.exc 1.5m above the starting point complete all as specified.

M&L for hard core of broken bricks of gauge n exc 63mm, deposited, spread, and levelled in layers n exc 15cm thick, watered and reammed to a true surface complete all as specified.

M&L of Cement concrete type D-2, 1:4:8 (40mm graded aggregate), 100 mm thick complete all as specified

Material and labour Coloured chequred cement conc tiles (25cm x 25cm x 22mm thick) in grey cement and with pigment in floors etc , set and jointed in neat cement slurry, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified.

M& L for Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified.

M&L brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified & directed.

M&L rendering 15mm thick CM 1:4 on fair face of brick over concrete surface finished even and smooth witout using extra cement complete all as spd.

Taking down carefully copper/AImn point wiring (Light,Fan/Point Socket or power) (fittings such as switches ceiling roeses, pendent, regulators, sockets etc to be measured & paid seprately) & making good to disturbed surface of walls/floors etc.

M&L point wiring using approved colour coding as per IS with stranded copper conductor single core 1.5 Sqmm (Nominal area), PVC insulated cable in and incl PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.and with all connecting accessories incl mild steel sunken boxes suitable for mounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer incl mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, incl PVC insulated copper conductor 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified. Note : Switch/sockets shall be measured and paid for separately :-

One light/fan point controlled by one switch complete all as specified and directed by Engr-in-Charge.

One switch socket outlet 3 pin,5 Amp on the independent board complete all as specified and directed by Engr-in-Charge.

One switch socket outlet 3 pin,5 Amp on same board complete all as specified and directed by Engr-in-Charge.

All as per item No 107.00 here-in-before but with 2 single core PVC insulated FRLS and sheathed copper conductor of size 2.5 Sqmm in and including PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.and with all connecting accessories with 2.5 Sqmm PVC insulated FRLS copper conductor as earth wire and connecting to common earth dolly for 6 pin 16 Amp socket outlet on the independent board.using 2.5 sqmm copper cable incl PVC insulated copeer conductor 1.5 Sqmm as continued earth wire .

All as per item No 107.00 here-in-before but with 2 single core PVC insulated FRLS and sheathed copper conductor of size 4.0 Sqmm in and including PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.and with all connecting accessories with 4.0 Sqmm PVC insulated FRLS copper conductor as earth wire and connecting to common earth dolly for 6 pin 16 Amp socket outlet on the independent board.

S&F Lamp holder,PVC insulated body, with back plate suitable for batten fitting complete all as specified and directed by Engr-in-Charge.

M& L switch piano, flush type, single pole 1 way 6 Amp,ISI marked completeall as specified.

S&F switch piano flush type, single pole 1 way 16 Amp complete all as specified and directed by Engr-in-Charge.

M& L socket 5 pin 6 Amp piano flush type,ISI marke complete all as specified and directed by Engr-in-Charge.

S&F socket out let 2 in one 6 pin 6 & 16 Amp complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose, 3 phase/ PVC/ polycorbonate,isolate bady complete all as specified and directed by Engr-in-Charge.

S & F LED bulb 10 watt complete all as specified and directed by Engr-in-Charge.

Supply and fixing Aluminium housing LED 22 Watt inverter batten with inbuilt Li Ion battery for power backup of 2 to 3 hrs complete make of fittings Halonix Model :HLB -08-22-CW-INV.

S&F 9 watt led lamp Decorative wall light fixture made up of Polycarbonate , fancy type, made out of Polycorbaonate,suitable for B-22 base holder fixed as in repair complete all as specified and directed.

S&F sleek LED mirror light with diffuser 7/ 9 watt along with all accessories prewired including connecting with copper flexible cable of size 0.7 Sqmm 3 core and all as specified and directed .

S & F Bulkhead luminaire Decorative Energy saving new generation 10W LED IP65 with opal diffuser incl electronics driver & connection with copper flexible cable 3 core complete all as specified and directed.

S & F LED Building security light30 wattLED Inverter RTC inbuilt for AUTOON/AUTO OFF and must have dimming facility from 10 to 100% of rated wattage as peruser defined timeline made pressure die cast housing with individuals LEDs & Lens with modular secondary optics and IP65 protection with electronics driver and copper conductor 3 core of 0.7 sqmm from ceiling rose to security light with Bracket made out of GI light grade pipe of 32 mm dia 1.5 mtr long bend to an angle of 120 degree with fixing arrangements on wall Complete all as in repair.

Supply and fixing wall Mounting LED fitting 9/12 watt 6500K 2 ft Basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver complete all as specified and directed.

S&F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt SPN complete all as specified and directed by Engr-in-Charge.

S&F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 4 way, 415 Volt TPN complete all as specified and directed by Engr-in-Charge

S & F MCBs 'B' characteristics, Double pole , 240 V, 32 Amp breaking capacity 10 kA complete all as specified and directed by Engr-in-Charge

S & F MCBs 'B' characteristics, Four pole , 415 V,63 Amp breaking capacity 10 kA complete all as specified and directed by Engr-in-Charge

S & F MCB B characterstic single pole 5 to 30 Amp, 240 volt breaking capacity 10 kA complete all as specified and directed by Engr-in-Charge

M&L for submain wiring with 2 single core PVC insulated FRLS cable 6 Sqmm copper conductor PVC sheathed in and including rigid PVC concealed conduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 6 Sqmm PVC insulated FRLS copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified.

Single pole and Neutral Sheet metal enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20 Amps.

Taking down after disconnecting electric connection 25/35/50 Ltrs storage water heater/geysers descalling and repair/replacement of un-serviceable spare and reassembling, recommissioning and testing complete all as per specified and directed. ( Note :- Spare parts will be measured and paid separately under relevant items of schedule).

S&F in repair water container ISI Marked made of ss, vertical or horizontal type for 25 to 50 ltr capacity gyser all as specified and directed.

S&F in repair cast copper alloy CP apparatus plate assembly (ISI Marked) with rubber washer suitable for 25 to 50 Ltrs capacity Geysers after taking out u/s aperature plate complete all as ditected.

S&F insulated flexible multi strand copper conductor nominal area 4 sq mm, 3 core after taking out old unserviceable cable complete all as directed.

S&F fusible plug for geysers melting at 95 degree centigrade ( any special required for for fixing plug shall be supply without any financial implication after taking down old unserviceable fusible plug complete all as directed.

S&F indicators lamp round/rectangular type for any type or size capacity after taking down old unserviceable indicator lamp complete all as directed.

S&F thermostat ISI Marked suitable for geysers 25 to 50 Ltrs capacity including taking down unserviceable complete all as specified and directed.

S&F Heating Element ISI Marked round/tringular base, push type or thread type including rubber washer for1.5/2.0 kw suitable for geysers 25 to 50 Ltrs capacity including taking down out unserviceable complete all as specified and as directed.

S&F Cromium plated connections 45 Cm long for Hot/Cold water of 15 mm size with cromium nuts and washers fixed as in repairs complete all as specified.

Supply & Fixing in repair exhaust fan, energy efficent metalic blades heavy duty turbo force of size 300 mm sweep, 900 rpm, AC, 230 volts complete with louvers, shutters, mounting on walls with holding down bolts, nuts, washers with cutting holes into or through stone/brick walls for fixing of 450 mm sweep exhaust fan including making good the cutting and matching the surface with existing surfaces and connection of flexible copper conductor cable three core ceiling rose to fan and testing and taking down old unsv and depositing to mes E/M store complete all as specified.

Earthing complete with and including galvanised steel earth plate electrode 60 cmx 60cm x 6 mm thick surrounded by mixture of charcoal and salt in alternate layers , buried directly in ground vertically in a pit of depth not less than 2.25 meter deep below ground level with top as of the plate at a depth of not less than 1.5 mtrs below normal ground level connected to galvanized iron or steel earth lead wire 4.0 mm dia,( NO 8 SWG) by means of bolts ,nuts, check nuts and washers of galvanised iron or steel earth wire protected by galvanised steel pipe 15 mm bore (light grade) and connected to main switch or main control board all as shown in electrical plate No. 3 of SSR - 2009(Pt I) & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers, 20 mm bore GI pipe (Light grade ) for watering , protection pipe funnel, wire mesh , PCC 1:2:4 type B1 chamber in cement concrete ,50 mm thick precast RCC M-25 ( Normal mix) cover duly reinforced with XPM (weight not less than 3 kg /sqm ) and CI frame etc , and including provision of test point , connecting to test point and testing on completion etc, complete all as specified. NOTE : The unit rate include earthing lead and protection pipe upto 6.5 metre from top of earth plate.

Supply & laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured wit galvanised steel wire or tape and overall PVC sheathed 16 Sqmm nominal cross section,4 core ,stranded conductor , in service connections.

Excavating in trenches, n.exc 1.5 m wide and n. exc 1.5 m in depth for laying cable , pipe and getting out complete all as specified and directed by Engr-in-Charge.

Returning , filling in, including spearding, levelling , wateing and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge

Removing excavated material n exc 50 M and depositing whee directed at a level n exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge

Supply and Laying reiforced precast cable cover class LV Type I flat size 250mmmx 150mm x40 mm for the protection of cable laid flat dry across the cable complete all as specified.

Tubes, light grade, galvanised 40 mm dia with all fittings laid in trenches or fixed on walls etc complete all as specified and directed by Engr-in-Charge

Amount of credit of Rs. 78134.60 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Rajesh Agencies

R. P. Suppliers and Construction Co.

Babu Ram Sud and Sons