Construction of FIS Kharedi Nallah to Limitiyar in GP Tindi Distt L S

Amount

Cutting in earth work and disposal of excavated earth in all kind of soil such as pick work, jumper work, blasting work in soft/ hard rock or chiseling wedging, out soft/ hard rock where blasting is probhibited i/c all leads and lifts complete as per direction of Engineer-in-charge.

Excavation in foundation and trenches up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge. Pick & Jumper work

Providing & Laying cement concrete 1:6:12 ( 1 cement : 6 sand : 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per satisfaction and direction of Engineer-in-charge.

Providing & Laying cement concrete 1:4:8 ( 1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per satisfaction and direction of Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 ( 1cement: 1.5 sand: 3graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-

Foundation, footings, bases of columns and the like and mass concrete with in all leads and lifts as per the direction of Engineer-in-Charge.

Walls (any thickness but not exceeding 0.1 metre thickness) including attached pilasters, butresses, plinth and string concrete etc. from top of foundation level upto floor two level with in all leads and lifts as per the direction of Engineer-in-Charge.

Providing form work with steel plates of 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give a fair finish including centring ,shuttering, strutting & propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:-

Veritcal surface such as wall ( any thickness) partion and the like including attached pilaster, butresses, plinth and string courses and the like with in all leads and lifts as per the direction of Engineer-in-Charge.

Providing Mild/TOR steel reinforcement for RCC work i/c bending, binding & placing in position complete up to floor two level (TOR/Mild steel ) in all leads and lifts as per direction of Engineer-in charge.

Random rubble masonery /polygonal rubble masonary ( Uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with CC 1 : 6 : 12 ( 1 cement: 6 sand: 12 graded stone aggregate 20mm nominal size) in C.M. 1: 6 (1cement : 6sand) in Breast walls & retaining walls within all leads and lifts as per satisfaction and direction of Engineer-in-charge.

50 mm thick cement concrete flooring 1:2:4 (1 cement: 2 sand : 4 graded stone aggregate of 20mm nominnal size) laid in a single layer finished with a floating coat of neat cemen twith in all leads and lifts as per the direction of Engineer-in-Charge.

20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arises, internal rounded angles chamfers and/ or rounded angles not exceeding 80mm in girth and finished even and smooth in CM 1:3 (1cement : 3sand) in all leads and lifts as per the direction of Engineer-in-Charge.

Wire crate of interlink chain filled with boulder with square cut faces against the chain( interlink chain to be measured and paid separately) in all leads and lifts as per the direction of Engineer-in-Charge.

Wire crate made of interlink chain filled with boulder with square cut faces against the wire ( Boulder filling to be measured and paid separately) interlinked chain 5 mm thick corresponding to SWG. 6 (15cmX 15cm) mesh as per the direction of Engineer-in-Charge. (Through Rate)

Providing, Laying, Jointing & Testing of HDPE pipe of following dia in trenches PN 6 Kg/cm^2 working pressure PE-80 grade conforming to IS :4984-2016 with (Fusion welding) complete including fitting within all lead and lift as per direction of Engineer-in-Charge (earth work in trenches to be meausred and paid for separately).(labour rate)

HDPE pipe 160 mm OD PN-6 PE-80

MUKESH BHARDWAJ

SATISH KUMAR

Aat Ram

MOHAN SINGH