CERTAIN MISCELLANEOUS BR REPAIR WORKS IN SOUTHERN PART OF RUNWAY FOR OTMS UNDER AGE BR-II OF GE (AF) LOHEGAON AT AF STATION PUNE

Amount

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring complete all as specified and directed.

M&L for Vitrified Ceramic tiles (Light Shade) 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bedding layers in CM (1:6) complete all as specified and as directed.

M&L for Vitrified Ceramic tiles (Light Shade) 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick backing bedding layers in CM (1:4) complete all as specified and as directed.

S&F 300x200x7mm thick glazed ceramic coloured tile on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed.

Ditto all as per Ser Item No. 7.00 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Dismantling of Stone slabs and interlocking /chequered tiles laid dry of any description or thickness in floors, etc. complete all as specified and directed.

M&L for chequered cement concrete tiles 300x300x25mm thick, machine pressed (rubber mould type) conforming to IS 13801; set jointed and pointed in neat cement slurry in floors laid on 15mm thick in CM (1:6) screed bed or bedding layer with grey cement and pigment complete all as specified and directed.

M&L for machine pressed precast interlocking paver block any shape and size conforming to IS -15658-2006 of 80mm thickness M-40 Gde with grey cement and pigment over and including 25mm thick sand cushioning complete all as specified and directed.

M&L for 40mm thick cudappa stone slab over cement screed base laid and jointed wih grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in flooring including rubbing and polishing complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate as in sub base of floor and path, etc.complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection complete all as specified and directed.

Demolition of brick work or PCC blocks/stone masonary built in cement mortar including coping of manholes complete all as specified and directed.

M/L for PCC precast solid block masonry walling (1:2:4) Grade B1 exc 10cm width /girth in CM (1:6) complete all as specified and directed.

M & L for stone masonary random rubble type , uncoursed well bonded,bedded and solidly hearted,built in cement mortar (1:6) complete all as specified and directed.

M & L for stone masonary random rubble type , uncoursed well bonded,bedded and solidly hearted,built in cement mortar (1:6) but except stone complete all as specified and directed.

M&L for 15 mm thick rendering on stone masonry works or other than fair faces of brick work or concrete surface finished even and fair without using extra cement in cement mortar 1: 4 complete all as specified and as directed

Raking out joints/ pointing to masonry or brick-work in single detached joints for flashing,built in cement mortar complete all as specified and directed.

M&L Flush pointing to random rubble,uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or ceiling including raking out joints hacking for key scrubbing down with the water etc, complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:4) on external surfaces of brick work finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and apply three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 2mm thick wall care putty on walls, complete all as specified and directed.

Taking up or down 15 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed

Taking up or down 20 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed

Refixing old steel tubing and connection 15 mm bore in new or old position in wall, ceiling and floor etc complete all as specified and directed.

S&F 15mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc complete all as specified and directed.

Refixing old steel tubing and connection 20 mm bore in new or old position in wall, ceiling and floor etc complete all as specified and directed.

S&F 20mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc complete all as specified and directed.

S&F in repairs 15 mm dia stop cock of cast copper alloy but fancy type chromium plated screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed complete all as specified and directed.

S&F in repairs swivel shower rose of PTMT any colour for fixed with 15mm bore GI pipe complete all as specified and directed.

S&F in repairs Bib taps, fancy type CP cast copper alloy with crutch or butter fly handle , screwed down, or secrewed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ) complete all specified and directed.

S&F PVC connection 15mm bore with PTMT nuts and 750mm long complete all as specified and directed.

S & F PVC (SWR) gully trap 110 mm dia fixed in cement concrete including removal of existing old damaged gully traps and providing connection upto 1st manhole with PVC pipe complete all as specified and directed.

Demolition of wall & ceiling boards of any description of materials and any thickness including cover fillets etc complete all as specified and directed.

M&L for AC plain sheet ceiling 4mm thick on aluminium grid work 60cmx60cm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5x 23.5x1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and ‘J’ bolts washer nuts for securing frame work to ceiling suspended @ 120 Cm C/C both ways, size of grid shall be 610x610mm, including two coats of oil bound distemper of over one coat of primer and preparation of surfaces complete all as specified and directed.

S and F Gypsum Board 12mm thick in ceiling fixed with screw in aluminium snap grid framed work as per manufacturers instructions complete all as specified and directed.

Disconnecting existing water tank exc 500 ltr and nexc 1000 ltrs, setting aside (for lowering if required) for repair cleaning, removing all scale and dirt etc from tanks and from mouth of circulating pipes and re-fixing in position complete all as specified and directed.

Ditto all as per Ser Item No 46.00 above but exc 250 and n.exc 500ltr capacity complete all as specified and directed.

M & L for cleaning and removing all scale and dirt ,etc ,from tanks exc. 500 ltr and nexc. 1000 ltr capacity and from mouths of circulating pipes ,etc complete all as specified and directed.

M & L for cleaning and removing all scale and dirt ,etc ,from tanks exc. 250 ltr and nexc.500 ltr capacity and from mouths of circulating pipes ,etc complete all as specified and directed.

Dismantling water tank of exc. 500ltr but n.exc 1000ltr capacity and removing from site complete all as specified and directed.

S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank (cylindrical vertical with closed top ) 500 Ltr capacity, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection complete all as specified and directed.

Ditto all as per Ser Item No 51.00 above but 1000ltr capacity complete all as specified and directed.

S&F 20 mm bore ball valves high pressure PTMT with epoxy coated rod complete all as specified and directed.

S & F ball brass valves 20mm high pressure,with polyethene float and float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F waste fittings, brass, chromium plated for wash basin,sink etc . with long screwed shanks and fly-nuts, flange and bedded in red lead cement and other end fixed with 32mm dia complete all as specified and directed.

S&F Sink made of stainless steel with drainage board1mm thick kitchen or laboratory with plug washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915x460mm bowl size 410x330x160mm complete all as specified and as directed

S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed.

S&F in repair Vitreous China half stall urinals bowel type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 secuing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement, fixing automatic flushing cistern with brackets flush pipe grating and union fo dischage pipe (excluding of fixing supply pipe to flushing cistern, trap) including waste pipe complete all as specified and directed.

S&F Tubular towel rail 20mm dia 600mm long CP including brackets complete all as specified and directed.

Taking down doors frame with shutters (without taking of shutters from the frame ) of size exc 1.5 Sqm but n. Exc 4.0 Sqm each from brick/stone walls complete all as specified and directed.

Forming jambs, etc, to openings (to foregoing item), including cutting, tooting and properly bonding into work, also facing, jointing and pointing to match existing work in CM (1:4), complete all as specified and directed.

S & F Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colur PVC sheet reinforced with MS square tube, supplying & fixing in penning as per specification and drawing complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rill and bottom rail on either side & bottom rail paneling of plain clour PVC sheet tobe fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core with block board core and plywood face panels complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .

S & F aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed length of bolt 300mm complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each easing & adjusting and refixing in the same opening complete all as specified and directed.

Hacking out old broken glass (any thickness ,size ,quality or description ) from wooden frames or stone ,concrete or brick surrounds ,glazed with putty or fixed with beads complete all as specified and directed.

M & L for 3 mm sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sqm. complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F mild steel work as in hold fasts and similar work conforming to Fe-290 or Gd -E 165 complete all as specified and directed.

M & L for framed work such as grills or railing in design pattern etc with ends of bars shoulders rebated or forged in to spick confirming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 140mm door stopper of aluminium body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F Mortice brass lock vertical type size 100mm with 4 levers complete all as specified and directed.

S&F in repair aluminum (extuded section) body door closer hydraulically regulated designation No 3 universal type, suitable fo door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fixing mild steel work as in angle iron, flat iron of any size for post and struts as in fencing including, cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh ,chain link fencing etc including all necessary drilling bolting or riveting etc and/or fixing with screws, bolts etc. and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

S&F fe 410 grade Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed.

S&F of Fe410 grade Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M& L for preparation of newly steel/iron surfaces with prime coat over which two coat of synthetic enamel paint complete all as specified and directed.

M&L for PCC type C-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc. complete all as specified and directed.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) incl removal of old unservicebale barbed wire complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Taking down doors frame with shutters (without taking of shutters from the frame ) of size exc 1.5 Sqm but n. Exc 4.0 Sqm each from brick/stone walls complete all as specified and directed.

Taking down window/ventilator frame with shutters (without taking of shutters from the frame) of sizes n. Exc 1.5 Sqm each from brick/stone walls complete all as specified and directed.

M & L for anodised aluminium frame of standerd section for doors, windows, ventilators and partitions with double rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for Powder coated aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured seperately) complete all as specified and directed.

M&L for Powder coated aluminium window and ventilator shutters, side hung type without sash bars/Sliding track type with locking device aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) (Glass / Wiremesh should be measured seperately) complete all as specified and directed.

M&L for sheet glass 5.0 mm thick ordinalry quality and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed

M&L sheet glass 4.0 mm thick ordinalry quality and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed

S&F in repair for 12 mm thick prelaminated particle board exterior grade, prelaminated both side with decorative choice lamination fixed with screw to timber or aluminum frame work complete all as specified and as directed.

Smruti Construction

N AND G CONSTRUCTION

R k construction