REPAIR TO STEEL FURNITURE GI CHARPOY ETC AND PAINTING OF STEEL FURNITURE UNDER GE AF JORHAT

Amount

ALMIRAH LARGE STEEL - (FD-1031)

S & F LEG of Almirah large steel made out of 1mm thick mild steel sheet as shown on drawing and applying two coats of synthetic enamelpaint over a coat of red oxide primer with a spray painting compressor, including removing of unserviceable leg complete all as specified,shown on drawing and as directed by Engineer-in-charge.

All as per serial item no. 1.01 above but shelves of almirah large steel.

All as per serial item no. 1.01 above but door of almirah large steel.

S & F Locking Device including locking rods for Almirah large steel including removing of unservicable locking device complete as shown in drawing.

S & F Handle 150mm long,chromium plated for Almirah large steel including removing of unservicable Handle complete as shown in drawing.

S & F lock of size 65 mmX55 mm universal type 6 lever made out of mild steel, powder coated for Almirah large steel including removing of unserviceable lock complete all as specified,shown on drawing and as directed by Engineer-in-charge.

LOCKER BED SIDE STEEL - (FD-1029)

S & F leg of locker bed side steel made out of 1mm thick mild steel sheet as shown on drawing and apply two coats of synthetic enamelpaint over a coat of red oxide primer with a spray painting compressor, including removing of unserviceable leg complete all as specified,shown on drawing and as directed by Engineer-in-charge.

All as per serial item No. 2.01 here-in-before but shelves of locker bed side steel

All as per serial item No. 2.01 here-in-before but door of locker bed steel

S & F handle 100mm long of mild steel chromium plated for locker bed side steel including removing of unserviceable handle complete as shown in the drawing.

S & F hasp and staple 75mm long mild steel chromium plated for locker bed side steel including removing of unserviceable hasp and staple complete all as specified,shown on drawing and as directed by Engineer-in-charge.

ALMIRAH MEDIUM STEEL - (FD-1032)

S & F LEG of Almirah medium steel made out of 1mm thick mild steel sheet as shown on drawing and apply two coats of synthetic enamelpaint over a coat of red oxide primer with a spray painting compressor, including removing of unserviceable leg complete all as specified,shown on drawing and as directed by Engineer-in-charge.

All as per serial item no. 3.01, but Shelves for Almirah medium steel.

All as per serial item no. 3.01, but door for Almirah medium steel.

S & F Locking Device including locking rods for Almirah medium steel including removing of unservicable locking device complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S & F Handle 150mm long,chromium plated for Almirah medium steel including removing of unservicable Handle complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S & F lock of size 65 mmX55 mm universal type 6 lever made out of mild steel, powder coated for Almirah medium steel including removing of unserviceable lock complete all as specified,shown on drawing and as directed by Engineer-in-charge.

TABLE OFFICERS STEEL - (FD-1003)

S & F drawer of size 320x144x410mm for table officer steel made out of 1 mm thick mild steel sheet with all the necessery cutting, moulding, make hole welding etc., and apply two coat of synthetic enamel over a coat of red oxide primer with spray painting compressure including removing unserveciable drawer, complete as shown in the drawing.

S & F lock 3 way, 6 lever for table officer steel including removing unserviceable drawer lock complete all as specified in the drawing.

S & F PVC recess handle of best quality including fixing with self tapping screw as shown in drawing, including removing unserviceable handle, complete all as specified.

S & F hard rubber shoe 25mm X 25mm of best quality including removing unserviceable rubber shoe complete all as specified in the drawing or as approved by engineer in charge.

S & F in repair Top of table officer steel 18mm thick pre-laminated particle board with 4 mm thick around 2nd class HW edging all as specified as shown on drawing and as directed by Engr-in-chrge.

TABLE CLERKS STEEL - (FD-1004)

S & F drawer of size 310 x 144 x 410mm made out of 1 mm thick mild steel sheet with all the necessery cutting, moulding, make hole welding etc., and apply two coat of synthetic enamel over a coat of red oxide primer with spray painting compressure including removing unserveciable drawer, complete as shown in the drawing.

S & F lock 3 way, 6 lever for table clerk steel including removing unserviceable drawer lock, complete all as specified in the drawing.

S & F PVC recess handle including fixing with self tapping screw, including removing unserviceable handle, complete all as specified in the drawing.

S & F hard rubber shoe 25mm X 25mm including removing unserviceable rubber shoe complete all as specified in the drawing.

S & F in repair Top of table clearks steel 18mm thick pre-laminated particle board with 4 mm thick around 2nd class HW edging complete all as specified,shown on drawing and as directed by Engineer-in-charge.

RACK SHOE STEEL - FD/E6/MAP/02(R)

S & F of existing frame of rack shoe steel made out of 25mm dia mild steel pipe with all necsessary workman ship like cutting bending making holes and welding including removing of unsertvicable frame and applying two coats of synthetic enamal paint black with spray compressure complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S & F of shelves of rack shoe steel with all necsessary workman ship like cutting bending making holes and welding including removing of unsertvicable shelves and apply two coat of synthetic enamal paint black with spray compressure complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S & F in repair hard plastics shoe, complete all as specified,shown on drawing and as directed by Engineer-in-charge.

CHAIR SCHOOL WITH HAND BOARD - FD/E6/MAP/05

S & F of writing pad made out of 18mm thick prelaminated particle board top openable with PVC edging (hinged on RHS screwed to 25 mm dia hollow steel pipe inserted in 20 mm MS rod welded to frame) including removing unserveciable top, complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S & F one piece PVC Back and seat (blow plast or equivalent ), complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S & F of existing frame of chair school with hand board made out of 25mm dia mild steel pipe with all necsessary workman ship like cutting bending making holes and welding including removing of unsertvicable frame and apply two coat of synthetic enamal paint black with spray compressure complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S & F in repair hard plastics shoe, complete all as specified,shown on drawing and as directed by Engineer-in-charge.

CHAIR CB STEEL WITHOUT ARM :- (FD-75M)

S & F of seat for chair CB without arm size 375X425X25mm made out of second class hard wood ,all as shown in the drawing, including weaving plastic cane of 2mm wide boarder with 3mm wide, half round type white godrej pattern, fitting seat on frame with self tapping screw neatly. All the wooden exposed parts shall be french polish up to glossy finish or painted with synthetic enamel black paint complete all as specified,shown on drawing and as directed by Engineer-in-charge.

All as per serial item no. 8.01, above but back of size 355X420X25mm for chair CB steel without arm.

CHAIR CB STEEL WITH ARM :- (FD-75M)

S & F of seat of chair CB steel with arm of size 460x420x25mm made out of second class hard wood ,all as shown in the drawing, including weaving plastic cane of 2mm wide boarder with 3mm wide, half round type white godrej pattern, fitting seat on frame with self tapping screw neatly. All the wooden exposed parts shall be french polish up to glossy finish or painted with synthetic enamel black paint complete all as specified,shown on drawing and as directed by Engineer-in-charge.

All as per serial item no. 9.01, above but back 460X370X25mm for chair CB steel with arm.

S & F handle for chair CB steel with arm made out of second class hardwood and apply french polish of black paint upto glossy finish complete all as specified,shown on drawing and as directed by Engineer-in-charge.

CHAIR VARANDAH:- (FD-259)

Removing of old unservicable plastic cane from seat and back of chair Verandah and recanning of seat and back with 4mm wide half round plastic cane of best quility Godrej pattern,complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S&F of leg of chair verandah made out of 20mm dia mild steel pipe with all nesessary workman ship like cutting bending making hole and welding including removing of unsertvicable leg and apply two coat of synthetic enamal paint with spray compressure complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S&F in repair hard plastics shoe complete all as specified,shown on drawing and as directed by Engineer-in-charge.

GI Charpoy:- (FD-220)

S&F GI Charpoy Long Rail of GI Pipe 32mm Bore (dia) Medium Grade duly Threaded Both Ends upto the required Length and fitted to frame of Charpoy including taking out unserviceable long rail from 3-way elbow by unscrewing, complete all as specified,shown on drawing and as directed by Engineer-in-charge.

Cutting long rail (retrieved from Item No. 11.01 here-in-before) to make short rail and threading both ends upto the required length including starightening where required and fixing including taking out unserviceable short rail by unscrewing from three way elbow, complete all as specified,shown on drawing and as directed by Engineer-in-charge.

Cutting short rail (retrieved from Item No. 11.02 here-in-before) to make legs and threading one ends including straightening where required and fixing including providing 2 Nos mild steel flat iron 20 x 3 mm clamps and providing mild steel flat iron or washer to bottom of mild steel clamps, welded to leg and treated with one coat of blacksyntheti enammel paint over a coat of red oxide primer including taking out unserviceable leg by unscrewing from three way elbow complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S&F GI ELBOW 3-WAY, ISI Marked suitable for GI Pipe 32mm Bore (dia) of GI CHARPOY including Taking out unserviceable GI ELBOW from the Frame, complete all as specified/as shown on Drawing/as directed.

S&F GI CHECK NUT, ISI Marked suitable for GI Pipe 32mm Bore (dia) of GI CHARPOY including Taking out unserviceable GI Elbow from the Frame, complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S&F MS Flat 50mmX6mm thick to charpoy GI Pipe 900 mm long with nut and washer, complete all as specified/as shown on Drawing/as directed by Engineer-in-charge.

S&F in repair ply wood of size 2000 mm x 900 mm x 12 mm for charpoy GI Pipe with 8 numbers of screw 65 mm with Nut and Washer complete all as specified/as shown on Drawing/as directed, (Make : Century / Kit Ply / Green ply)

CHAIR EXECUTIVE REVOLVING LONG BACK TP

S&F PVC pedestal with castors (wheel) of chair executive revolving long back complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S&F of hydraulic piston (for height adjustment) of chair executive revolving long back complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S&F of castor wheel of chair executive revolving long back complete all as specified,shown on drawing and as directed by Engineer-in-charge.

Remove the old US cushion and tapastry cloth and S&F with new cushion and tapestry cloth for seat of chair executive revolving long back as per existing shape and size complete all as specified,shown on drawing and as directed by Engineer-in-charge.

Remove the old US cushion and tapastry cloth and S&F with new cushion and tapestry cloth for back of chair executive revolving long back as per existing shape and size complete all as specified,shown on drawing and as directed by Engineer-in-charge.

S&F PVC Handles of chair executive revolving long back of existing shape and size including removing of unserviceable handle complete all as specified,shown on drawing and as directed by Engineer-in-charge.

PAINTING OF STEEL FURNITURE:- M & L preparing externel and internal surface of following steel furnitures including de-rusting/scratching, paste applying putty, sanding, etc. and applying spray painting with two coats of synthetic anamel paint (1st quality) using spray guns, over a coat of red oxide primer , (existing colour/required colour) complete all as specified,shown on drawing and as directed by Engineer-in-charge.

Almirah Large steel

Almirah Medium steel

Book case steel

Locker bed side steel

Rack steel enclosed back 1905X910X455mm

Rack Six tier Steel

Rack adjustable six tier 1905X915X305mm

Rack pegion hole steel 18 holes 1905X915X540mm

Chair CB steel without Arm

Chair CB steel with Arm

Locker six unit steel

Stool Steel 1'-0"X1'-0"X1'-8"

Table clerk steel

Table Ofice Officer steel

Chair Varandah

Table 3' x 2' with drawer steel Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

M/S N M TRADERS

Bidder Name

M/S N M TRADERS

A M CHOUDHURY AND CO