Construction of road from Km 0.000 to Km 2.430 of Sikandra Rajwah to reach Jodhpur Jhal at the tail of Agra main canal, repair of Targhar, regulator and construction of boundary wall at Jodhpur Jhal.

Amount

Dismentling existing plaster including disposal of refuse with in distance of 60 meters including all cost of labour,T&P etc complete as per directed by Engineer in Charge.

Ist Class Brick work in 1:4 cement mortar i/c cost of all material, labour and T&P etc

12mm Cement plaster with cement mortar in proportion of 1:4 (1 cement : 4 coarse sand) i/c cost of all material, labour and T&P etc complete.

Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over @ 3.28 Ltr/10sqm including one coat of primer appled @ 2.20 Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work as per directed by Engineer in Charge.

Painting wood work with deluxe Multi surface paint of Required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved Brand and manufacture supply of all labour, material and T&P required for proper completion of work as per directed by Engineer in Charge.

Providing and laying Vitrified tiles in floor with lean concrete of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints.

Providing & Laying of 18mm Granite stone (super quality) flooring over 25mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry including rubbing and polishing complete including all cost of labour, material and T&P required for proper completion of work as per directed by Engineer in Charge.

P/L integral cement based water proofing treatment Brick Koba including preparation of surface as required for treatment of roofs, consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS. 2645 including adjoining walls upto 300 mm height. b) Laying brick bats with mortar with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 to required slope including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final be flooded with water for a minimum period of two weeks for curing and for final test. With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing & Fixing steel gate i/c 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron, M.S. angels 40x40x6 mm for diagonal braces and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. i/c Cost of all Material, Labour & T&P etc Complete as per direction of Engineer-in-charge.

Supplying and Fixing of shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and making of sal wood chaukhats i/c fixing at site with cost of timber,labour T&P etc Complete as per direction of Engineer-in-charge.

E/w in Filling including lead up to 200.0 M. and lift up to 1.50m with mannual compaction , ramming dressing with labour etc. complete as per direction of Engineer-in-charge.

C.C. in 1:3:6 (1 cement:3 stone ballast:6 coarse sand) including cost all materials, labour , mechanical mixing ,vibrator and T&P etc. complete.

Laying of I shaped precast Interlocking tiles of thickness 100mm (Rubber moulded Grey) (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work including cost of material, labour and T&P etc.

Turfing with chippi grass i/c ramming & watering etc including cost of material, labour and T&P etc. as per Direction of Engineer-in-Charge.

Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. (500 lt.)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required as per Direction of Engineer-in-Charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: with White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing water closet squatting pan (Indian type W.C. Pan) with 100 mm sand cast iron P or S Trap, 10 litre low level white P.V.C. Flushing Cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Viterous China Orissa pattern W.C. pan of size 580x440 mm with internal type foot rests.

Providing and fixing PVC Low level flushing cistern (10 L capacity) with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete,

S & F surface/Flush mounting 4 ways VTPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge

Providing and fixing C.P. brass bib cock 15 mm dia of approved quality conforming to IS:8931.

Providing and fixing 140 mm PVC pipe conforming to IS make working pressure 6 Kg/Cm incuding testing labour T&P and all complete fittings.

Five Kilowatt Solar Power pack with Virtual Classroom display etc complete i/c connection/wiring to all light/fan points, complete fittings etc as directed at site by Engineer in charge.

Supplying and fixing 2HP submersible pump incuding testing labour T&P and all complete fittings as directed at site by Engineer in charge

Supply & Fixing of Starter single phase MV as directed at site by Engineer in charge.

Supply and wiring 4 sqmm Three core PVC insulated cable for submersible pump as directed at site by Engineer in charge.

Wiring points for fan and light duty exhaust fan. with 1.5 sq.mm. PVC insulated single core aluminium condutor cable in PVC conduit pipe on surface, complete with 1.5 sq. mm. PVC insulated aluminium conductor cable as earth continuity wire piano type switch and ceiling rose on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respects.as directed as per direction of Engineer in charge.

S&F of LED Tube Light with batten suitable for upto 1x22 watt LED tube light complete as directed at site by Engineer in charge.

Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA

Supplying and laying of 63 mm dia DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 100 to 120 Watt. Confirming to IP 65 protection complete in all respect. CAT-AAA

Earth work in Excavation of foundation i/c lift upto 1.50 m and lead up to 30.00 m and including back filling & ramming and disposal of surplus earth as per direction of Engineer-in-charge.

Demolition Stone Rubble Masonary manually by mechanical means including stacking of serviceable material and disposal of unservicable material within 50 m lead as per Direction of Engineer-in-Charge.

Demolition Brick Work manually by mechanical means including stacking of serviceable material and disposal of unservicable material within 50 m lead as per Direction of Engineer-in-Charge in lime mortar

Random Coarse Rubble Stone Masonary (khanda stone) with Cement Mortar 1:4 in foundation and plinth including cost of material, labour and T&P etc. upto 60 m Lead.

Cleaning Thick Bushes and Throny Jungle without uprooting with disposal away from site as per Site Condition & as per direction of Engineer-in-charge.

Providing & Laying brick on edge soiling (kharanja) on prepared subgrade with brick on edging, filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soiling, watering and rolling same with three wheel road roller including all costs of T&P material required for proper completion of work.

Construction of boundary wall with prestressed precast RCC Panel (M-25) of height 1.85 M above the Ground i/c Excavation, Erection of Foundation Work with Finishing of wall with Exterior Emulsion paint (Apex) of approved brand and manufacture & Design and required shade as per Drawing i/c Cost of all Material, Labour & T&P etc Complete.

S/P Sign Board of size 4x3 ft i/c Supply erection, Painting and Letter Writing i/c Cost of all Material, Labour & T&P etc Complete.

Uprooting Jhunds and Moonj with disposal away from site as per Site Condition & Engineer-in-Charge.

Construction of Granular Sub base by providing well graded material, spreading in uniform layers with mortar grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical specification Clause 401.

Providing, laying, spreading and compacting stone aggregates (45-63 mm) of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.

Providing, laying, spreading and compacting stone aggregates (22.4-53) of specific sizes to Water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Providing and laying prime coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet with paver finisher of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates and using VG-10 bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508.

Providing and laying seal coat by means with Bitumen VG-10 sealing the voids in a bituminous surface laid to the specified levels, grade cross fall using Type C as per Technical Specification Clause 510

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 303.1

Providing & Laying of Hot Applied Thermoplastic Compound 2.50 mm thick with Reflectorising Glass Beads 250 gm per Sqm Area thickness of 2.50 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level,uniform and free from streaks & holes. (as per MORTH -803 (8.13)

Brick edging on both side of the Road of M-150 Brick 8 cm wide and 12 cm deep laid with mud mortar including all labour and supply of brick finished to required template & ramming the excavated earth

M/S PRAGYA CONSTRUCTION

KISHANKUMAR SARASWAT